|
| 1 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. |
| 2 | Providing and Laying concrete 1:6:12 (one cement:six sand:twelve graded stone aggregate 40 mm (forty millimeter nominal size) for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 including carriage of material with in all leads and lifts as per direction by th e Engineer-In-Charge including all leads and lifts |
| 3 | Half brick masonry in common burnt clay building bricks in cement mortar 1:4 (1cement: 4sand) 2nd class bricks in foundation and plinth |
| 4 | 15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. |
| 5 | Providing and fixing ISI marked high pressure PVC (finolex) of working pressure not less than 4.5 kg/sqm in trenches including fixing of joints properly with approved adhesive complete in all respects including carriage of materials within all leads and lifts as per direction of Engineer in charge 150mm |
| 6 | Providing and fixing ISI marked high pressure PVC (finolex) of working pressure not less than 4.5 kg/sqm in trenches including fixing of joints properly with approved adhesive complete in all respects including carriage of materials within all leads and lifts as per direction of Engineer in charge 150mm |
| 7 | Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) |
| 8 | Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete. |
| 9 | Providing and fixing vitreous China wash down, water closet(European Type W.C Pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1cement: 1sand) seat and cover to be measured and paid for separately (i) Anglo Indian including all leads and lifts, as per HPPWD, specification of 1990 volume-I as directed by the Engineer-In-Charge |
| 10 | Providing and fixing 100mm size P or S trap for water closet(squatting pan)including jointing the trap with the pan and soil pipe in cement mortar 1:1 (1cement: 1sand) (i)Sand cast iron including all leads and lifts, as per HPPWD, specification of 1990 volume-I as directed by the Engineer-In-Charge |
| 11 | Providing and fixing 600x450mm bevelled edge mirror or superior glass mounted on 6mm thick a.AC sheet or plywood sheet and fixed to wooden plug with C.P brass screws and washers including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge |
| 12 | Providing and fixing C.P Brass bib tap with capstan head (i) 15mm dia including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge. |
| 13 | Providing and fixing C.P Stop cocks(i) 15mm dia including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge. |
| 14 | Providing and laying spartie ceramic tiles 5.5mm thick in flooring (300 x 300mm. size) treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement |
| 15 | Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and macking good the same but excluding fittings FLAT BACK category No 1025 including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges |
| 16 | P/F glasss panes 5.5mm thick including carriage of material with in all leads and lifts as per direction by the Engineer-In-Charge. |
| 17 | P/F gyser including carriage of material with in all leads and lifts as per direction by the Engineer-In-Charge. |
| 18 | curtain rod including carriage of material with in all leads and lifts as per direction by the Engineer-In-Charge. |
| 19 | Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour withscrews etc. complete. |
| 20 | P/F aluminum handles including carriage of material with in all leads and lifts as per direction by the Engineer-In-Charge. |
| 21 | P/F Sliding Dooor Bolts including carriage of material with in all leads and lifts as per direction by the Engineer-In-Charge. |
| 22 | P/F hinges including carriage of material with in all leads and lifts as per direction by the Engineer-In-Charge. Please Enable Macros to View BoQ information |
