Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-05-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-06-2026 |
| 2 | 23-05-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-05-2026 |
| 3 | 16-05-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-05-2026 |
| 4 | 16-05-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-05-2026 |
| 5 | 05-05-2026 | POSTPONED | Date | 16-05-2026 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishes complete all as specified and directed |
| 2 | M&L for PCC (1:3:6) type C-2 using 40 mm graded aggregate as inpost hole complete all as specified and directed. |
| 3 | M&L for PCC (1:4:8) type D-2 using 40 mm graded aggregate as in foundation filling & mass concrete complete all as specified and directed. |
| 4 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade (with grey cement and no pigment) over sand cushioning complete all as specified and directed. |
| 5 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed |
| 6 | M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as specified and directed |
| 7 | Use of forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' in plinth protection complete all as specified and directed |
| 8 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed |
| 9 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc complete all as specified and directed |
| 10 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 11 | M&L for Granite tiles 20mm thick (approved color and texture) machine cut, bedded including 20mm thick screed bed CM 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 12 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 13 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 14 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubish of the premisses complete all as specified and directed |
| 15 | M&L for Vitrified Ceramic colured tiles of Dark Shade or Double Charged of size area of each tile exc 0.36 sqm but not exc 0.42 sqm in floor etc, jointed in neat cement slurry and pointed in white or colours cement to match complete all as specfied and directed over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed |
| 16 | Ditto As 15.00 above but in skirting with a backing coat of 10 mm in CM (1:4) complete all as specified and as directed. |
| 17 | M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, including finishing of concrete topping even and rough complete all as specified and directed |
| 18 | M&L for coloured Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular), coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 all as specified and directed. |
| 19 | M&L for coloured Glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to matchtiles in vertical surface including 10mm thick rendering in CM 1:4, all as specified and directed |
| 20 | S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor trap complete all as specifed and directed. |
| 21 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white and trap including seat cover, fixing bolt, flush pipe, connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified & as directed. |
| 22 | S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern', size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 incl flush pipe and making good to floor including removing rubbish all as specified and directed. |
| 23 | S&F in repairs 32mm bore LDPE waste pipe for WHB/ sink complete all as specified and directed. |
| 24 | S & F in repair 10 ltrs capacity PVC low level flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC flush pipe complete all as specified and as directed. |
| 25 | S&F in repair fancy type 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 26 | S&F in repair 15mm bore fancy type CP bib tap cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified & as directed. |
| 27 | S&F in repair two way bib tap 15mm dia all as specified and directed. |
| 28 | S&F in repair 15mm bore dia Chromium plated stop valve/angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed |
| 29 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 30 | S&F in repairs PVC connection 15mm dia of length not less than 600mm with both ends, brass fly nut for water supply complete all as specified & as directed. |
| 31 | S&F in repair Health faucet( ABS Body) mild steel CP suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connections and fixd in position complete in all respect as specified |
| 32 | Supply and Fix in Repair PVC Flush Tank by providing Flush Kit, Washers, PVC Connections, Rubber Kit and other related accessories including making good the damage to the nearby Walls etc damaged during repair all as specified and as directed by Engineer-in-Charge |
| 33 | Supply and Fixing in Repair by disconnecting and Refixing the Bib Taps, Pillar Taps, Two Way Taps, Stop and Angle Cock by replacing Spindle and other accessories including making good the damage to other linked Items of Tiles, PCC Etc complete all as specified and as Directed By Engineer-In Charge. |
| 34 | Taking up or down pvc/ steel tubing of 20/25 mm bore and connections all as specified and directed |
| 35 | S&F CPVC pipe 20mm dia of grade SDR-11 (class-I) including all CPVC and brass fittings fixed to wall, floor or ceiling or laid in floors etc complete all as specified and directed. |
| 36 | S&F CPVC pipe 25mm dia of grade SDR-11 (class-I) including all CPVC and brass fittings fixed to wall, floor or ceiling or laid in floors with and incl clamps etc complete all as specified and directed. |
| 37 | Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface all as directed by Engr-in-charge |
| 38 | S&F in repair 600mmx450mm Looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 39 | S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement complete all as specified & as directed. |
| 40 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 41 | S&F 75mm dia PVC (SWR) pipe and single socketed in any length with rubberring joint laid in trenches or in floor. |
| 42 | S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubberring jointlai in trenches, floors or fixed to walls. |
| 43 | S&F 75 mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door. |
| 44 | S&F 110mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door. |
| 45 | S&F 75 mm bore PVC (SWR) bend in any radius. |
| 46 | S&F 110mm bore PVC (SWR) bend in any radius. |
| 47 | S&F 75 mm bore PVC (SWR) coupler in any radius. |
| 48 | S&F 110mm bore PVC (SWR) coupler in any radius. |
| 49 | Dismantling of old broken water storage tank cap exc 250 ltrs and n exc 500 ltrs complete all as specified and directed |
| 50 | S&F rotational moulded polyethylene water storage tank 500 ltrs cap cyllinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I complete all as specified and directed |
| 51 | Cleaning and removing all scale and dirt etc from over head water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed by E-in Charge for following capacity including writing with oil paint the date of cleaning on tank ; |
| 52 | (a) Exc 250 Ltrs but not exc 500 Ltrs |
| 53 | (b) Exc 500 Ltrs but not exc 1000 Ltrs |
| 54 | (c ) RCC Tanks of Capacity Exc 1000 Ltrs and up to 25000 Ltrs |
| 55 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including beding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx 460mm bowl size 410mm x 330mmx 160mm complete all as specified and directed |
| 56 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm |
| 57 | S&F in repair brass chromium plated kitchen sink waste coupling comperising of four parts CP brass kitchen sink strainer & basket, rubber gasket, PTMT locknut, PTMT strainer sleeve with 32mm outlet and check of any dia as per site requirement complete all as specified and directed. |
| 58 | Material and labour for sunken floor treatment as follows:- |
| 59 | (i) Demolition of cement concrete in sunken floors incl. removing dubrish outside MD land complete all as specified and directed. |
| 60 | (ii) Brushing neat cement slurry with 3.0kg of cement per sq. metre mixed with WPC @ 3% by weight of cement as per manufacturer's instruction to fill all hole and crack complete all as specified and as directed. Note:- Water tightness testing should be done after 24 hours |
| 61 | (iii) Material and labour for PCC (1:1 1/2 :3) type A-0 using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout. Note : Water proofing compound will be measured and paid separately. |
| 62 | (iv) Material and labour for plastering on vertical sides and top surface of CM (1:3) 15 mm thick mixed with water proofing compound as per manufacturer instructions. Plaster shall be extended over PCC coving when the same is green i.e. PCC & plaster be carried out at the same time. Note :Water proofing compound will be measured and paid separately. |
| 63 | (v) Material and labour for 2 coats of Dr. Fixit krystalline waterproofing coating compound shall be applied after laying sewage/ plumbing pipes with fixtures in position. |
| 64 | (vi) Material and labour for filling the sunken floor with PCC ( 1:5:10) type E-2 using brick aggregate over the treated surface. |
| 65 | (vii) Material and labour spouts of 50mm dia GI pipe light grade projecting 450mm clear of face outer wall with PVC mosquito proof cap on inner face of pipe shall be provided to drain out seepage water , if any.Note : Water tightness testing should be done after applying Dr Fixit epoxy compound, by pounding water for 72 hours & rectify defects if any till total elimination of defect. Dubrish to be removed outside MD land. |
| 66 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 4.0 sqm each complete all as specified and directed. |
| 67 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and directed. |
| 68 | Taking down Shutters of any description exc 1 sq m but n exc 2 sqm each complete all as specified and directed |
| 69 | Taking down and refixing Shutters in same opening after adjusting the size, of any description exc 1 sq m but n exc 2 sqm each complete all as specified and directed |
| 70 | Fixing with running welding in repair of Steel Windows, by Welding or by Bolts of adequate strength, Cutting of Windows whereever required for AC Duct Opening Etc, Inclding Weldin if Required on Window Ventilator Etc, Including all the necessary Accessories for Window Fixing, Window and Ventilator of any type, Any Size and thickness, complete all as specified and as directed. |
| 71 | Removing and Refixing in Same Opening by Repairing the Aluminium Doors and Windows, of any Type and any Size, Sliding or Openable, After Repairing, any Loose Fitting Sections, Including Screws, Bolts Rubber Clips, and other Similar articles, Making Good before refixing, Cleaning the Parts causing malfucntioning of Doors, Windows, by repairing the Jambs and Cills of Window/Doors if Required, All Including Material and Labour complete all as specified and as directed by Engineer-in-Charge |
| 72 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, All Including Material and Labour complete all as specified and as directed by Engineer-in-Charge |
| 73 | S&F in repair Door closer hydrau lically regulated Aluminium (extruded section type), designation No. 2universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, All Including Material and Labour complete all as specified and as directed by Engineer-in-Charge |
| 74 | Petty repairs to servicable sensor & fancy plumbing fittings by authorised agent including providing & replacing genuin company manufactured spare parts if required at site complete all as specified and as directed. |
| 75 | Removal and Refixing in same opening or any other opening, of any Shape and any Size 12 mm (or any other thickness) thick Toughned Glass as in Hinged Doors, Partitions, Automatic Doors and Similar work including cutting to Shape Drilling Holes required including necessary stainless steel fittings like Handles of size 300 mm Long and other connecting items necessary for proper functioning of door/ Opening complete all as specified and as directed by Engineer-in-Charge. |
| 76 | M&L for Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed |
| 77 | S&F 35mm thick second class hard wood factory made glazed and Skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - Size of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a) complete all as specified and directed |
| 78 | S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 79 | S&F solid PVC door frame(approved color) of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing complete all as specified and directed. |
| 80 | S&F Factory made solid panel PVC door shutter(approved color and pattern) 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site all as specified and directed. |
| 81 | S & F 100mm size Butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and as directed. |
| 82 | S&F Aluminum tower bolts of extruded section of size 150mm all as specified and directed. |
| 83 | S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed. |
| 84 | S&F 300mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 85 | S&F double body Floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed. |
| 86 | Supply only galvanised mild steel wire clothes 0.46 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and as directed . Note : Fixing only rate is included in window/door shutter item considered therein. |
| 87 | M & L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 88 | Dismantling boarding, any description, fixed in any position with screws etc complete complete all as specified and directed |
| 89 | S&F 16-17mm thick Prelaminated particle board, interior grade,but prelaminated both sides with decorative choice laminations, fixed to frame work complete all as specified and directed. |
| 90 | Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed |
| 91 | S&F 2nd class hard wood plain fillet sq. rect and triangluar in section, wrought secured with sectional area exc 13 but n exc 25 sqcm complete all as specified and directed |
| 92 | S&F 100mm size Hasp and staple, safety type, aluminum anodised hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 93 | S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed |
| 94 | S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple complete all as specified and directed. |
| 95 | S&F 100 mm size Mild steel pressed handles, oval type, stove enamelled black all as specified and directed. |
| 96 | S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of tinned tacks, or galvanised wire staples complete all as specified and as directed . |
| 97 | S&F in repairs 100mm size Butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and as directed. |
| 98 | S&F in repairs Aluminum tower bolts of extruded section of size 150mm all as specified and directed. |
| 99 | S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed. |
| 100 | S&F in repairs 300mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 101 | S&F in repairs double body Floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters. |
| 102 | S&F in repair MS 300 mm, ordinary rat tail rod pattern springs including roller and roller plate fixed to steel frame by welding complete complete all as specified and directed. |
| 103 | Dismantling wrought iron or mild steel work of any description not otherwise described for of any description. |
| 104 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed |
| 105 | S&F Mild steel, plain, black sheet 1.25mm in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes unched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed |
| 106 | M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed |
| 107 | Hacking out old broken glass of ( any thickness, size or quality from wooden or metal frame glazed with putty or beads/cleat complete all as specified and directed |
| 108 | S&F 3mm thick figured glass with oil putty and glazing clips (min two nos each pane), plain ordinary quality not exc 0.5sqm in each pane complete all as specified and directed. |
| 109 | S&F 3mm thick sheet glass with oil putty and glazing clips (min two nos each pane), plain ordinary quality n exc. 0.5sqm in each pane complete all as specified and directed. |
| 110 | S&F in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) frame and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, suitable aluminum handle, handle lock/ mortice lock for door shutter etc all complete as per architectural drawings complete all as specified and directed. |
| 111 | S&F in repair mild steel Mortice lock 4 lever, vertical type, size 100 mm complete all as specified and directed |
| 112 | S&F 4.8/ 5mm thick sheet glass fixed in window/door shutter plain ordinary quality n exc. 0.5sqm in each pane complete all as specified and directed. |
| 113 | Demolition of cement Concrete (un-reinforced) of any description and in any position not otherwise specifically provided complete with all layers of Water Proofing Compound i.e. APP Membrane, Tiles PCC etc for complete all as specified and directed. |
| 114 | M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges using WPC of approved make as per manufacturers instruction all as spc and directed (WPC shall be measured and paid separately) |
| 115 | M&L for 10mm thick cement plaster over PCC in CM 1:3 finished even and smooth (without using extra cement) and using WPC of approved make per manufacturers instruction all as spc and directed (WPC shall be measured and paid separately) |
| 116 | M&L for preparation and cleaning of newly plastered surface and applying two coat of Dr fixit Roofseal classic as per following direction 1. Marking of 2 x 2 m area on roof surface 2. Apply Ist coat on ready surface in one direction using 1.5 ltr/ 4 sqm area 3. Apply 2nd coat using 1.0 ltr/ 4 sqm after 12 hrs in perpendicular direction of 1st coat application |
| 117 | M&L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt (grade 2) one coat on newly plastered surface complete all as specified and directed |
| 118 | Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface complete all as specified and directed |
| 119 | M&L Providing, cement concrete 1:2:4 type B1 in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including neccessary formwork. |
| 120 | M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces on newly plastered surface complete all as specified and directed |
| 121 | M&L for applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified |
| 122 | Supply and laying of non woven Geotextile 150 GSM over APP membrane with necessary fixing arrangement all as specified and directed |
| 123 | S&F Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection> 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. |
| 124 | Taking down cement plaster from brick or concrete surface incl raking out joints hacking for key and scrubbing down with water complete all as specified and directed. |
| 125 | M&L for rendering 10 mm thick on brick or concrete surfaces or surface other than fair faces of brick work in cement plaster 1:6, finished even and smooth w/o using extra cement all as specified and directed |
| 126 | M&L for preparing of newly plastered surface of walls and applying one layer of white putty and two coats of oil bound distemper over a coat of compatible primer etc complete all as specified and directed. |
| 127 | M&L for rendering 15 mm thick in two layers over brick work or concrete surfaces, 10mm thick in cement plaster 1:4 backing coat and 5mm thick in cement plaster 1: 4 mixed with WPC all as specified and directed. Note: WPC shall be measured and paid separately under relevant item. |
| 128 | M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and directed. |
| 129 | Supply only integral water proofing compound of approved make complete all as specified and as directed |
| 130 | M&L complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and including one coat of white cement based putty (where it is required) all as specified and directed by Engr-in-Charge. |
| 131 | M&L for prepration of old ceiling surfaces, applying two coat of white wash on ceiling all as specified. |
| 132 | M & L Preparation of old plastered surface wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Make : Shalimar (Shaktiman)/ Asian (ACE) /Burger (Wall Menta) or equivalent in approved make by GE. |
| 133 | Material and Labour for Solid PVC Wall Lining consisting of 5 mm thick Plain colour PVC sheet, Design to be choosen from catalogue, inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed by Engnr-in Charge |
| 134 | Supply and Fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed by Engineer-in-charge |
| 135 | Dismantling of stainless steel railing any type and size fixed in any postion embedded in concrete etc complete all as spc and directed |
| 136 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 137 | Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including fittings (such as switches, ceiling roses, pendants, regulator, sockets etc) and making good disturbed surfaces of walls, floor etc. |
| 138 | Taking down old DBs including existing MCCBs, MCB TPN and connected items of any make and type from the site and making good surface complete all as specified and directed. |
| 139 | Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed. |
| 140 | Taking down old unsv light fitting,Security light ,bulb of any size and make from the site and making good surface complete all as specified and directed. |
| 141 | M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and its also including various sizes of module frame, plates in gray/white colour also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly complete all as speccified and as directed |
| 142 | One light/fan point controlled by one way switch ( switch to be measured and paid separtely) |
| 143 | One socket outlet on Same board. |
| 144 | One light point controlled by two way switch. |
| 145 | One 5 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately. |
| 146 | -ditto- as above item No 131.04 but copper conductor 2.5 sqmm for 15 amp socket outlet. |
| 147 | -ditto- as above item No 131.04 but copper conductor 4.00 sqmm. |
| 148 | S & F in repair incl making existing surface good sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 20 Amp.(AC Box) complete all as directed by EIC. |
| 149 | S & F in repair of modular switch single pole one way 6 Amps, 1 module ISI marked complete all as specified and directed by EIC |
| 150 | S & F in repair of modular socket single pole one way 6 Amp-2/3 pin, 2 module ISI marked complete all as specified and directed by EIC |
| 151 | S & F in repair of modular switch single pole one way 16 Amps, 1 module ISI marked complete all as specified and directed by Engr-in-charge. |
| 152 | S & F in repair of modular socket single pole one way 16 Amp-2/3 PIN, 2 module ISI marked complete all as specified and directed by Engr-in-charge. |
| 153 | S & F of modular switch socket combination 16A (with gang box where is required), 6 pin, 3 module, ISI marked complete all as directed by EIC. |
| 154 | S & F in repair of modular bell push 6A, 1 module ISI marked complete all as specified and directed by EIC |
| 155 | S & F in repair of multi music call bell ISI marked complete all as specified and directed by EIC |
| 156 | S & F wireless door bell kit , over 1000 feet range 60 chime, 5 levels volume, IP44 waterproof , 220 V, and LED flash with ISI marked complete all as specified and directed by EIC. |
| 157 | S & F in repair of call bell Ding Dong ISI marked complete all as specified and directed by EIC |
| 158 | S & F in repair of bell push flush type SP 5 Amp complete all as specified and directed by Engr-in-charge. |
| 159 | S & F in repair of switch piano type single pole one way 5 Amps, ISI marked complete all as directed by EIC. |
| 160 | S & F in repair of socket outlet 5 pin flush 6 Amp multi pin 2/3 pin complete all as directed by EIC. |
| 161 | S & F in repair of switch socket combined outlet 6 pin flush 16 Amp multi, ISI marked complete all as directed by EIC. |
| 162 | S & F in repair of switch piano type single pole two way 5 Amps front operated ISI marked complete all as directed by EIC. |
| 163 | S & F in repair of modular ceiling fan regulator stepped type 2 module ISI marked, complete all as specified and directed by EIC |
| 164 | S & F in repair of lamp holder , PVC/Poly carbonate type with back plate suitable for batten fittings complete all as directed by EIC. |
| 165 | S & F in repair of 3 pin plug top AC-230V, 6 Amp complete all as directed by EIC. |
| 166 | S & F in repair of 3 pin plug top AC-230V, 16 Amp complete all as directed by EIC. |
| 167 | S&F in repair ceiling rose, 3 terminal/PVC/Polycarbonate, isolated body complete all as specified and directed by EIC. |
| 168 | S & F in repair of High lam sheet cover ISI marked with required Nos of space for switches/ Sockets/ Regulator of size 250x280mm complete all as directed by EIC. |
| 169 | S & F inverter type LED bulb 12 watt with very high efficiency suited for installation in existing lamp holders, complete all as as directed by EIC. |
| 170 | Supply, installtion, testing and commissioning of modular engagement light (with red & green indication light) with very high efficiency, complete all as as specified and directed by EIC. |
| 171 | S & F in repair incl taking down LED bulb 5 Watt with very high efficiency suited for installation in existing/new lamp holders as indication lamp of colour red,green, complete all as as specified and directed by EIC. |
| 172 | M & L Submain wiring with three run single core 10 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in concealed New PVC conduit 25 mm dia ISI marked alongwith one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed. Note: Three runs of 10 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 173 | M & L Submain wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in concealed New PVC conduit 25mm dia ISI marked alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed. Note: Three runs of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 174 | M & L for sub main wiring with two run of 4 sqmm size PVC insulated multi stranded copper conductor fire retardant (FRLS) cable (Nominal area) and one run of 4 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by EIC. Note: Three runs of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 175 | M & L for sub main wiring with two run of 2.5 sqmm size PVC insulated multi stranded copper conductor fire retardant (FRLS) cable (Nominal area) and one run of 2.5 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by Engr-in-charge.Note: Three runs of 2.5 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 176 | S & F in replacement LED batten luminaire surface/wall mounted ,4 feet 20 Watts comprise of aluminium extruded with anodised with powder coated in white colour with decorative end cap. The luminare is pre-wired with high efficiency electronic driver, with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection DM-4KV & CM-3KV, IP-40 protected, meets LED IS specifications, Class -1, Short circuit and over circuit protection, voltage range - 140 to 300 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 lm/w, filiker free and including connecting up with PVC sheathed suitable size copper conductor with push type cable connector 2/3 pin cable connector from ceiling rose to fitting fixed with 2 years of replacement warranty on fittings complete all as specified and directed by EIC. |
| 177 | S & F in replacement LED batten luminaire surface/wall mounted, 2 feet 10 Watts comprise of aluminium extruded with anodised thermally conductive material with powder coated in white colour with decorative end cap. The luminare is pre wired with high efficacy electronic driver, with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection DM-4KV & CM-3KV, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 140 to 300 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 lm/w, filiker free and including connecting up with PVC sheathed suitable size copper conductor with push type cable connector 2/3 pin cable connector from ceiling rose to fitting fixed with 2 years of replacement warranty on fittings complete all as specified and directed by EIC. |
| 178 | S and F in repair incl taking down Ultra Bright LED Pl-L white/warm white, 4 pin with very high efficiency suited for installation in existing 2G11 lamp holders, complete all as specified and directed by EIC. |
| 179 | S&F in replacement of LED aviation light luminaires comprising of aluminium housing with water proof/weather proof and polycartboinate enclsoure with 302 nos LED complete all as specified and directed by EIC. |
| 180 | S&F 30 W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 110lm/W. The color temperature is 6000 to 6500 K with a color rendering index of 70. The luminaire is IP:66 protected. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<10%, High and low protection along with a surge protection of 4 KV including provision of suitable dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed by EIC. |
| 181 | S & F in replacement Recess/surface mounting as suitable in existing fitting ultra slim 36 W LED 2x2 edge-lit tile in Aluminium Extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as specified and directed. |
| 182 | S&F in replacement of new generation post top lanterns, IP-65 elegantly designed spun alumnium and high grade aluminium heat sink for efficient thermal management, sturdiness and excellent corrosion resistance. MS base provided to support the housing, environmental friendly long life high power LED light 25 watt complete all as directed by EIC . |
| 183 | S & F in repair of 15 W LED Recess/surface mounted downlighter (square/round)with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver complete all as directed by EIC. |
| 184 | S&F in repair of Aluminium strip 25 x 3.15 mm with saddles and fixing screws etc for roof conductors and down conductors along with suitable insulator above ground complete all as specified and directed |
| 185 | S&F in repair of air termination, single pointed, Copper rod 12 mm dia and 300 mm long complete all as specified and directed. |
| 186 | M&L for Test point terminal block made of gun metal or phosphorus bronze Size 75 x 75 x 25mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw complete all as specified and directed. |
| 187 | M&L for HDPE pipe of 32 mm dia, cut to Size all as required at Size including fixing arrangements and providing appropriate Size insulators to insulate pipe from foundation or air termination from pipe complete all as specified and directed. |
| 188 | M&L for clamps, bracings, supports and back plates made out of structrural steel sections including nuts, bolts and washers all as required at size for fixing GI tubing in truly vertical position including two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 189 | M&L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in foundtion of pole/stay assembly etc including necessary form work with two coat of lime wash wherever applicable, complete all as specified and directed |
| 190 | M & L for fixing of distribution box cover made up of GI steel Sheet with a CRCA door, cutting , two coat painting, screw, nuts etc including all connected items as required at site, suitable for various size of VTPN DB, TPN DB, SPN DB complete all as specified and directed by EIC. |
| 191 | S&F in repair of VTPN MCCB DB 4 way, with 200 A rated bus bar, double door with 100 Amp,25 KA,4P MCCB as incomer and cement spill protector (Vertical type double door,100 Amps MCCB rate inclusive) 200 Amp rated bus-bar and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 protection ISI marked including wooden rectangle board of first quality of suitable size for mounting of DB box with provision for 4 Pole MCCB* as incomer and SP/TP MCB's as outgoings complete all as specified and directed by EIC. Note: - Contractor must provides IP43 certificate. |
| 192 | S&F in repair of TPN DB 8 way, with 200 A rated bus bar, acrylic double door with 63 Amp,25 KA,TPN MCB as incomer and cement spill protector(Vertical type double door, TPN 63 A MCB rate inclusive) 200 Amp rated bus-bar and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 protection, ISI marked including wooden rectangle board of first quality of suitable size for mounting of DB box with provision for 4 Pole MCB* as incomer and SP/TP MCB's as outgoingscomplete all as specified and directed by EIC. Note: - Contractor must provides IP43 certificate. |
| 193 | S&F in repair of SPN DB 16 way with 200 Amp rated bus bar, IP 43, ISI marked acrylic double door complete all as directed by EIC. Note: - Contractor must provides IP43 certificate. |
| 194 | S&F in repair of SPN DB 12 way with 200 Amp rated bus bar, IP 43, ISI marked acrylic double door complete all as directed by EIC. Note: - Contractor must provides IP43 certificate. |
| 195 | S&F in repair of SPN DB 8 way with 200 Amp rated bus bar, IP 43, ISI marked acrylic double door complete all as directed by EIC. Note: - Contractor must provides IP43 certificate. |
| 196 | S & F in repair MCB SPN 32-40 A 240 V 10 KA 'B' curve and connection with suitable thimbles testing and commissioing complete all as specified and directed by EIC |
| 197 | S & F in repair of MCB TPN 40 to 63 A, 415 V with thimble suitable for existing wires complete all as directed by EIC. |
| 198 | S & F in repair MCB SP 6-32 A 240 V 10 KA 'B' curve and connection with suitable thimbles testing and commissioing complete all as specified and directed by EIC |
| 199 | S & F in repair 100 A MCCB 4 pole, 16 kA breaking capacity, 415 V (Ics=100% Icu ) with suitable thimbles all as specified and directed by Engr-in-charge |
| 200 | S & F in repair 63 A MCCB 4 pole, 16 kA breaking capacity, 415 V ( Ics=100% Icu ) with suitable thimbles all as specified and directed by Engr-in-charge |
| 201 | M&L earthing complete with GI electrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earth plate not less than 1.50 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze of sixe 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25 mm long hexagonal head screwed all as specified including excavation and earth work and disposal of surplus soil incl and necessary fitting for protection of GI strip incl laying of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MS angle iron frame for cover 40 mm thick (1:2:4) type B20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally PGL funnel with ground wire mesh 20mm dia Med grade GI pipe for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed. |
| 202 | M & L Earthing complete with galvanised iron earth plate electrode 60cmx60cmx6mm thick , burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4mm as earthing lead by means of galvanised nuts, bolts, check nuts and washers including excavation and earth work, PCC 1:3:6 type C-2 pit, PCC pit cover 1:2:4 type B-1 with handle, GI protection pipe 15 mm bore light grade and 20mm medium grade GI watering pipe, Funnel , wire mesh etc complete as shown in electrical Plate No.3 of SSR Part-I connected to earthing test point and metal part all as specified including testing on completion complete all as directed by EIC. |
| 203 | M & L Chemical earthing as per ASHLOK make model T-39, copper coated safe earthing electrode (SEE) of 3 mtr length with inner pipe of 40 mm dia and outer pipe of 80 mm dia with min 80-100 micron coation, filled with black fill compound mixed with soil and high specific gravity crystallin conductive mixture (CCM)of grade 'B' filled inside the earth electrode including drilling of hole of 150 mm dia bore with boaring machine upto 20 mtrs depth in soft/hard rock and filling the bore hole with black cotton soil upto 17 mtrs level i.e below the electrode bottom level including PCC earth pit and copper strip of 32 x 6 mm with GI tubing light grade for protection upto 7.5 mtr complete all as specified and directed by EIC. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
