|
| 1 | M&L for Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling complete all as specified and as directed. |
| 2 | M&L for Precast cement concrete mix 1:3:6 type C1(using 20mm grade stone aggregagte) solid block masonry exc.10cm in width and setting in CM 1:6 etc. complete all as specified and directed. |
| 3 | M&L for rendering 10mm thick CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 5 | S&F for pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self-tapping screws complete all as specified and directed. |
| 6 | S&F for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed. |
| 7 | M&L for taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 8 | M&L for Roughening surfaces of old concrete floor, ceilings by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 9 | M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed |
| 10 | M&L for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed |
| 11 | M&L for Brushing neat cement slurry with 3.00 Kg of cement per Square metre complete all as specified and directed. |
| 12 | M&L for Rendering 5mm thick cement plaster in CM 1:3 on fair faces concrete surfaces such as ceilings etc surfaced finished even and smooth without using extra cement etc complete all as specified and directed |
| 13 | M&L for preparation of newly plastered ceiling surfaces and applying 3 coats of white wash complete all as specified and directed |
| 14 | M&L for preparation of newly plastered or un-plastered surface on walls and applying 2 coats of Oil bound distemper white or tinted over a coat of chalk whiting primer complete all as specified and directed |
| 15 | M&L for preparation of newly plastered or un-plastered wall surfaces and applying 2 coats of cement base paint over a coat of white alkali resistance primer complete all as specified and directed |
| 16 | M&L for preparation of old wall surfaces of walls of any description and applying one coat of white wash complete all as specified and directed |
| 17 | M&L for preparation of old walls surfaces of any description and applying one coat of distemper oil emulsion white or tinted complete all as specified and directed. |
| 18 | M&L for prepration of old wall surfaces of any description and applying one coat of Cement base Paint complete all as specified and directed. |
| 19 | M&L for preparation of new or previously un-treated steel or iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed. |
| 20 | M&L for preparation of old painted surfaces of any description over 10 cm in width or girth and applying one coat of Synthetic enamel paint, complete all as specified and directed. |
| 21 | M&L for preparation of old painted steel or iron surfaces of any description, n exc 10 cm in width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed. |
| 22 | M&L for preparation of old decorated surfaces of walls (Border & vertical projections such as cols, chajja, facia beams and the like), floor, interlocking tiles & chequered tile and road side kerb etc by washing rubbing down and stopping of painted surfaces and applying one coat of exterior acrylic emulsion anti-fungal paint of any colour or shade complete all as specified and as directed. |
| 23 | M&L for 25mm thick PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) and surface finished even and smooth without using extra cement complete all as specified and directed. |
| 24 | M&L for Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed. |
| 25 | M&L for 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor tiles complete all as specified and directed. |
| 26 | M&L for Vitrified Ceramic Tiles 9-10mm thick (square rectangular) polished, Light shade area of each tiles n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles etc complete all as specified and directed |
| 27 | M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles etc complete all as specified and directed |
| 28 | M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles etc complete all as specified and directed |
| 29 | M&L for coloured glazed ceramic tiles, size 200x300x7mm / 350x250x7mm / 450x350x7mm size, set and jointed in neat cement slurry over and including 10mm thick backing coat in CM 1:3 and pointed in coloured cement to match colour of tiles on vertical surface such as skirting dado etc complete all as specified and directed |
| 30 | M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads/EPDM gaskets complete all as specified and directed. |
| 31 | M&L for Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 32 | S&F plain sheet glass 4mm thick, ordinary quality and glazing with oil putty or using EPDM Gaskets in squares n.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 33 | S&F Solar control film 25-micron reflective type sticked to glass panes as per manufacturer’s instructions complete all as specified and directed. |
| 34 | S&F in repair Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed |
| 35 | S&F in repairs Door closer hydraulically regulated, with aluminium extruded section body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 36 | S&F in repairs wooden glazing beading of 2nd class hard wood straight (any size) finished wrought for glazing or gauged joinery for fixing wire gauge/ securing glass pane complete all as specified and directed. |
| 37 | Dismantling of old Ceiling boards (Fibre, pulp, insulation, etc) or insulation boards /slabs blankets, including cover fillets and frame work complete all as directed |
| 38 | S&F Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of perforated Size 595 x 595 mm of approved texture, 12mm semi/ fully with perforated 12mm thick micro tegular edged GRG false ceiling design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC 0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 24 x 32 mm of length 3000mm,cross-T of size 24x 32mm of length 1200mm and secondary intermediate cross-T of size 24 x 32 mm of length 600mm to form grid module of s1ze 600x600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on the periphery wall I partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 39 | Taking up or down 15 mm steel tubing and connections, including cleaning for re-fixing or removal to store all as directed. |
| 40 | Taking up or down 20 mm steel tubing and connections, including cleaning for re-fixing or removal to store all as directed. |
| 41 | Taking up or down 25 mm steel tubing and connections, including cleaning for re-fixing or removal to store all as directed. |
| 42 | Refixing of old steel tubing and connections in new or old position (Walls, ceiling, floors etc) of bore of pipe 15mm / 20mm all as specified and directed. |
| 43 | Refixing of old steel tubing and connections in new or old position (Walls, ceiling, floors etc) of bore of pipe 25 mm all as specified and directed. |
| 44 | S&F GI tubing 15 mm dia medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 45 | S&F GI tubing 20 mm dia medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 46 | S&F GI tubing 25 mm dia medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 47 | Supplying and laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fittings on wall, ceiling and in floors all as specified and directed. |
| 48 | Supplying and laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fittings on wall, ceiling and in floors all as specified and directed. |
| 49 | Taking down soil waste/vent & Rainwater pipes (any size or length/pattern), including all fittings all as directed. |
| 50 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors including flat iron clamp for proper fixing complete all as specified and directed.. |
| 51 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors including flat iron clamp for proper fixing complete all as specified and directed |
| 52 | S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed |
| 53 | S&F in repair PVC (SWR) bends 75 mm dia complete all as specified and directed |
| 54 | M&L PVC (SWR) floor trap, 75 mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed |
| 55 | S& F in repairs PVC (SWR) P trap 110mm bore complete all as specified and directed |
| 56 | S&F in repairs PVC (SWR) S trap 110mm bore complete all as specified and directed |
| 57 | S&F High density polyethylene pipes 50 mm bore of pressure ratings 6 kgf/cm2 fixed complete to walls, floors, ceiling etc. complete all as specified and directed |
| 58 | S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern), white including seat cover, P trap and fixing bolt etc (excluding flushing cistern and flush pipe) complete all as specified and directed |
| 59 | S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of cement concrete complete all as specified and directed |
| 60 | S&F in repairs vitreous china counter sunk modular wash basin, white, oval shape, size 555x425x195mm including cutting for and pinning in ends of brackets including fixing waste pipe of 32mm low density poly ethylene pipe (LDPE) of pressure rating 6 kg/cm2, brackets complete all as specified and directed Make : Jaquar (Code-FLS-WHT-0401) or its equivalent make as approved by GE. |
| 61 | S&F in repairs Wash basins, Vitreous China (flat back or angle back type) of size 630 x 450mm, including brackets, waste fittings etc complete all as specified and directed |
| 62 | S&F in repairs Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including flush pipe, waste pipe grating and union for discharge pipe complete all as specified and directed |
| 63 | S&F in repairs Vitreous China Urinal, Half stall type, white including chromium plated waste fittings, brackets, waste pipe etc complete all as specified and directed |
| 64 | S&F in repairs Urinal valve auto closing system, S/S Chromium plated, with built in control cock & wall flange complete all as specified. Make Jaquar PRS-CHR-077 or its equivalents make as approved by GE |
| 65 | S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed |
| 66 | S&F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and directed |
| 67 | S&F in repairs PVC valveless, syphonic action type, low level PVC flushing cistern 10 ltr cap white with flush pipe & all fitting complete all as specified and directed |
| 68 | S&F in repairs PVC waste pipe 32/40 mm dia for urinal/ WHB/Sink complete all as specified and directed |
| 69 | S&F in repairs CP waste coupling 32/40mm dia for sink, wash hand basin, urinals etc complete all as specified and directed. |
| 70 | Petty repairs to low level flushing cistern any size/ description for repair of leaking water by adjusting/ replacing the washer and adjustment of lever required for making the cistern functional complete all as specified and directed. |
| 71 | Petty repairs for leaking water in bib tap, pillar tap, stop cock, angle valve, WHB mixture, wall mixture, concealed stop cock etc of any description any size by changing washer/ jumper valve etc complete all as specified and directed. |
| 72 | Checking and attending to water leakage from water pipe lines and finding out any blockages /airlock/obstructions to water supply, requiring plumber work and carryout minor repairs such as replacement of checknuts, tightening of fittings including petty materials like M seal, screws, nails, thread (shoot), to make water supply / plumbing lines functional and leak proof complete all as specified and directed. Note:- Any other items except mentioned in this item, if required, the same shall be measured and paid for separately under respective items. |
| 73 | Checking and attending to waste water leakage from Soil/Waste pipe, waste coupling, Wash basin. sink, water closet, urinal and other sanitary fittings / fixtures and any blockages/obstructions to flow of waste water, requiring plumber work and carryout minor repairs such as replacement of checknuts, tightening of fittings, taking down and refixing of waste pipe, flush pipe, refixing of gratings etc, including petty materials like M seal, screws, nails, thread (shoot), to make free flow of waste water lines functional and leak proof complete all as specified and directed.Note:- Any other items except mentioned in this item, if required, the same shall be measured and paid for separately under respective items. |
| 74 | Cleaning of waste water / sewage lines up to first manholes by any means and removing blockages of water closets, urinal, WHB, Sink, Floor/Nahani trap complete all as specified and directed |
| 75 | S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union, tank nipple, tank connection, checknuts etc for 15mm bore pipe complete all as specified and directed |
| 76 | S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union, tank nipple, tank connection, checknuts etc for 20/25mm bore pipe complete all as specified and directed |
| 77 | S&F in repairs of brass spindle suitable for existing 15mm dia bore bib cock, stop cock, angle valve, CP Pillar cock, Wash basin mixture and valve mixture of any description (existing make Jaquar & Cera, etc) complete all as specified and directed |
| 78 | S&F in repairs PVC syphon kit for low level flushing cistern complete all as specified and directed Make cera/parryware/Hindware |
| 79 | S&F in repairs Urinal sensor kit suitable for Hindware, QUEO model, battery operated, Auto flush, including provision of required No. of suitable battery complete to make it functional all as specified and directed. |
| 80 | Petty repairs to Urinal sensor of any type, (electrical or battery operated) making it functional and provision of required capacity battery if any complete all as specified and directed. |
| 81 | S&F in repairs bib tap 15 mm standard of PTMT any colour screwed, for iron pipe and fixed. (minimum weight 15mm-90 gms) complete all as specified and directed. |
| 82 | S&F in repairs stop valve 15mm bore PTMT any colour screwed for iron pipe and fixed. (Min weight 15mm - 90 gms) complete all as specified and directed |
| 83 | S&F in repairs 15mm dia bib taps with wall flange (Fancy type), cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule complete with check nut, complete all as specified and directed. Make : Jaquar cat No. FON-40037 or its equivalent make as approved by GE. |
| 84 | S&F in repair 15 mm dia bib taps (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut complete all as specified and directed |
| 85 | S&F in repairs 15mm dia two-way bib taps with wall flange (Fancy type), cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule complete with check nut, 15mm bore complete all as specified & directed. Make: Jaquar cat No FON-40041 or its equivalent make as approved by GE. |
| 86 | S&F in repairs CP health faucet including necessary holding arrangements, screws etc complete all as specified and directed Make: Jaquar cat No. ALD-CHR-577 or its equivalent make as approved by GE |
| 87 | Taking down the existing bottle traps of wash hand basin / urinal / sink etc & refixing the same after cleaning including replacement of washers, packing etc if required complete all as specified and directed |
| 88 | S&F in repairs Brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe complete all as specified and directed Make: Jaquar cat No. ALD-CHR-769L or its equivalent make as approved by GE |
| 89 | S&F in repairs 15mm dia Angle cock with wall flange (Fancy type), cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete with check nut complete all as specified and directed. Make : Jaquar cat No.FON-40053 or its equivalent make as approved by GE |
| 90 | S&F in repairs 15mm dia Stop valves, chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed |
| 91 | S&F in repairs 25 mm dia Gun-metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe of 25 mm bore complete all as specified and directed |
| 92 | S&F in repairs 20 mm dia Gun-metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe of 20 mm bore complete all as specified and directed |
| 93 | S&F in repairs 15 mm dia Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \\"Hot\\" or \\"Cold\\" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed |
| 94 | S&F in repairs swan neck Pillar cock CP 15 mm dia complete all as specified and directedMake : Jaquar CON-CHR-123BKN or its equivalent make as approved by GE. |
| 95 | S&F in repairs Wall mixer non-telephonic Shower arrangement with connecting legs & Wall flanges complete all as specified and directed Make - Jaguar, Cat Part No - CON-219KN or equivalent make as approved by GE |
| 96 | S&F in repairs CP towel rail including necessary screws etc complete all as specified and directed Make: Jaquar cat No. AKP-CHR-35711PS or its equivalent make as approved by GE |
| 97 | S&F in repairs CP towel ring including necessary screws etc complete all as specified and directed Make: Jaquar cat No. AQN-CHR-7721 or its equivalent make as approved by GE |
| 98 | S&F in repairs towel rack with lower hanger (stainless steel), complete all as specified and directed.Make: Jaquar cat No. AQN-CHR-7781 or its equivalent make as approved by GE |
| 99 | S&F in repairs Soap dish all as specified & directed. Make: Jaquar cat No. ACN-CHR-1131N or its equivalent make as approved by GE |
| 100 | S&F in repairs Toilet paper holder with Flap recessed type (Stainless steel) complete all as specified and directed. Make: Jaquar cat No.AQN-CHR-7753 or its equivalent make as approved by GE |
| 101 | S&F in repairs Corner Glass shelf including necessary holding arrangements, screws etc complete all as specified and directed Make: Jaquar cat No. CAN-CHR1173 or its equivalent make as approved by GE |
| 102 | S&F in repairs PVC mirror cabinet, size 400mm x 500mm complete all as specified and directed. Make: Prayag cat No. 554 or its equivalent make as approved by GE |
| 103 | S&F in repairs plastic EWC seat cover of white colour pedestal pan, closed pattern with flat bottom & cover including MS chromium plated, alum hinging devices complete all as specified and directed. |
| 104 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm include waste coupling of PTMT of 40mm dia (half or full threaded) (Minimum weight 60 gms) complete all as specified and directed |
| 105 | S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm include waste coupling of PTMT of 32mm dia (half or full threaded) (Minimum weight 45 gms) complete all as specified and directed |
| 106 | S&F in repairs overhead Shower 150X150mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified and directedMake: Jaquar - OHS-CHR-35495 or its equivalent make as approved by GE |
| 107 | S&F in repairs Brass chromium plated shower rose 125mm size complete all as specified and directed |
| 108 | S&F in repairs 600 x 450mm bevelled edge mirror of selected quality glass 5.0/ 5.5mm thick mounted on standard PVC/Aluminium frame complete all as specified and directed |
| 109 | Cleaning of existing tank without dismantling of tank using bleaching powder complete all as specified and directed of capacity exc 250 ltr & n exc 500 ltr capacity all as directed |
| 110 | Cleaning of existing tank without dismantling of tank using bleaching powder complete all as specified and directed of capacity exc 500 ltr & n exc 1000 ltr capacity all as directed |
| 111 | Cleaning of existing tank without dismantling of tank using bleaching powder complete all as specified and directed of capacity exc 1000 ltr & n exc 2000 ltr capacity all as directed |
| 112 | S&F in repairs 500 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, complete all as specified and directed |
| 113 | S&F in repairs 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, complete all as specified and directed |
| 114 | S&F in repairs Ball Brass valve 25 mm dia high pressure, with polythene float and flynut complete all as specified and directed. |
| 115 | S&F in repairs Ball Brass valve 20 mm dia high pressure, with polythene float and flynut complete all as specified and directed. |
| 116 | S&F in repairs of PVC lid (Cover) for PVC water tank of different capacity mentioned above all as specified and directed. |
| 117 | M&L for rendering 10mm thick CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 118 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed |
| 119 | S&F Rolled mild steel as in Purlins, Rafters, main and cross beams, Cols etc fixed with angle cleats or other connecting plates Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed. |
| 120 | S&F steel work as in tubular trusses including special shaped washer etc complete using ERW or induction but welded tubes confirming to IS1161-1979 grade St-240. Grade 410-W Gde E-250 Quality complete all as specified and directed |
| 121 | M&L for applying 3 coats of white wash on ceilings of newly plastered surfaces including preparation of surfaces etc complete all as specified and directed |
| 122 | Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to wall surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat over a coat of wall putty 1 to 2mm thick include complete removal of existing surface of wall as recommended for under coat by manufacturer of interior emulsion complete all as specified and directed. |
| 123 | Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat including complete removal of existing surfaces as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed. Please Enable Macros to View BoQ information |
| 124 | Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat including complete removal of existing surfaces as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed. Please Enable Macros to View BoQ information |
