|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 2 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in cement and sand mortar 1:4, finishes even and rough, complete all as specified and directed. |
| 3 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square /rectangular) area of each tile not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, including 15mm thick screed bed/bedding layers in cement and sand mortar 1:6, complete all as specified and directed. |
| 4 | M&L for glazed ceramic tile 450x300x 7-8mm thick (coloured) on vertical surfaces such as skirting/dado etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering (Broomed) in cement and sand mortar 1:4, complete all as specified and directed. |
| 5 | M&L for non-skid ceramic coloured designer pattern tiles 300x300mmx7 to 8mm thick as in floors etc.set jointed in neat cement slurry and pointed in white cement or coloured cement to match etc, including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6, complete all as specified and directed. |
| 6 | M&L for granite (of any type) 16-18 mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and over 20 mm thick screed bed in cement mortar 1:3, including nosing/moulding of steps/edges from front, complete all as specified and as directed. |
| 7 | M&L for Marble work 18 to 20 mm thick (tabel rubbed and polished) at kitchen platform (Single Piece of slab for cooking Plateform)and like in cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade of Green marble and moulding of edges, including 15mm thick screed bed/base in cement mortar 1:4, complete all as specified and directed. |
| 8 | M&L for machine cut kota stone 16-18 mm thick, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade or the slab including rubbing and polishing complete including 20 mm thick screed bed in cement concrete 1:6 for laying Kota Stone side, complete all as specified and directed. |
| 9 | M&L for machine cut kota stone 16-18mm thick as in riser of steps, skirting, dado and pillar ,over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade or the slab including rubbing and polishing complete including 10mm thick plaster in cement concrete 1:3 for laying Kota Stone, complete all as specified and directed. |
| 10 | M&L for rounding to edges of stone slabs on edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed. |
| 11 | M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection, joints filled with bitumen sand mixed 50mm thick, finished even and fair without using extra cement, complete all as specified and directed. |
| 12 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, complete all as specified and directed. |
| 13 | Taking down chowkhat or frame with shutters (without taking off shutters from frames) exc. 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed. |
| 14 | Dismantling stone slabs or tiles of any description or thickness as in floors, pavings, aprons, pathway etc. laid dry and pointed, complete all as specified and directed. |
| 15 | M&L for 75 mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregates as in sub bases of floors and pavings, complete all as specified and as directed. |
| 16 | M&L for plain cement concrete 1:2:4, type B-0 using 12.50 mm graded crushed stone aggregates as in hold fasts,copings, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork, complete all as specified and as directed. |
| 17 | M&L for Chequered cement concrete coloured tiles size 300mmx300mmx25 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 laid over, complete all as specified and as directed . |
| 18 | S&F for powder coating of any colour (thickness or powder coating not less than 50 micron). powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighning 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long ( 1 No.) hinges type B-21 100mm long suitable handle (2 No.), complete all as specified and directed. Please Enable Macros to View BoQ information |
| 19 | S&F for powder coating of any colour (thickness or powder coating not less than 50 micron). powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighning 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long ( 1 No.) hinges type B-21 100mm long suitable handle (2 No.), complete all as specified and directed. Please Enable Macros to View BoQ information |
