|
| 1 | Supply, Installation, Testing & Commissioning of 3MP IP Network TDN Low-Light IR Rugged Bullet Camera (IP 55) 1/2.8\\" CMOS or better, 3MP (2304 x 1296) @ 25fps or better, triple stream at various resolution up to 25fps, Min. Illumination required 0.005 lux @ F1.6 (color), 0 Lux IR On, 4 IR LEDs Smart IR with upto 60m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265 & H.264 High Profile & MJPEG , Triple stream, 2.7 to 13.5mm 5X motorized focus & zoom lens, Field of View FoV H:85°-24°, BLC, HLC, 3DNR White Balance, Minimum Edge Intelligence Video Analytics : Motion Detection, Tampering, 4 Privacy Mask, 8 Region Of Intreset, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 256GB SD card support, PoE (802.3 af) and 12V DC, Max 6W, IP 66/67, IK 10 vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000) compliant.MR |
| 2 | Supply , Installation , Testing and commissioning of 32 Channel NVR (Network Video Recorder) Embedded Linux based for recording upto 32CH at D1 960fps with 04 nos. SATA HDDs minimum 40TB storage or more (recording requirement all cameras recording at D1, 25fps for 30 days), H.265 HEVC/H.264/MJPEG codec decoding, Front Panel with LEDs Indication for Power & HDDs Status, 3 nos. USB, ONVIF S, Time Sync with NTP, Encrypted Streaming & Control, 2-Way Audio Line & Out, PTZ Operation Pan, Tilt, Zoom, Support, Pre & Post Alarm Recording Support, Recording/Evidence Clip Export to USB, 16 Channel Synchronous Playback, Playback control i.e Play, Pause, Stop, Fast Forward, Backward, Speed Control, Timeline & Zoom; Snapshot, Web Client, Central Monitoring Software, iPhone; iPad; Android based Mobile clients, 02HDMI & 01VGA Output, 04 On Board HDDS each up to 10TB, Alarm Input (06 nos.), Alarm Output (02 nos.), 256 Mbps throughput, NDAA Section 889 Compliant, Operating Temperature –10°C to 55°C, Certification : Certifications: ONVIF compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032, NDAA & RoHS (EN63000) compliant. Including fixing accessories and cable termination with required connectors/Jack, complete in all respect as per instruction of engineer in-charge.MR |
| 3 | Supply , Installation , Testing and commissioning of 64 Channel NVR (Network Video Recorder) with client software for recording upto 64CH @ 1080P with 8 SATA port HDDs minimum 80TB storage or more (recording requirement all cameras recording at 2MP, 25fps for 90 days),H.265/H.264/MJPEG/MPEG4 codec decoding, Front Control Panel with LEDs Indication, 3 nos. USB, iPhone; iPad; Android based Mobile clients, Video Export feature on USB, Search Mode: Time/Date; Alarm; Motion Detection (MD); Smart Search, Dual HDMI Output, Alarm Input (8 nos.), Alarm Output (4 nos.), eSATA Device, 400Mbps each Incoming & Outgoing throughput, Operating Temperature –0°C to 40°C, Certification: CE, FCC, UL, Non-Chinese & NDA, including fixing accessories and cable termination with required connectors/Jack, complete in all respect as per instruction of engineer in-charge. |
| 4 | HardDisk Supply, installation, testing and commissioning of Survellance Class/CCTV Grade 10TB HDD. (90 Day storage at 25fps) MR |
| 5 | Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i5 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5\\" SATA 6Gb/s Hard Drive; Operating system: Windows 10 Professional 64 Bit or latest.MR |
| 6 | Supply, Installation, Testing and Commissioning of Screen 43'' LED Screen 4K Resolution.MR |
| 7 | Supply, installation, testing & commissioning of manageable PoE+ Layer-2, 24 Port with 4 up-link port 100/1000 copper ports Base-T rack mounted switch, Web user, traffic manage HTTP/HTTPS web brows minimum IE5.5, Cat-6 RJ-45 connector supported, including 2 port 10G SFP module, maximum 75W power consumption. inbuilt fan, Storage temperature -20C-70C, Operating temperature 0C - 40C, Operating humidity 5% 95%, Complete with all rack mounting accessories for completion.MR |
| 8 | Supply, installation, testing & commissioning of manageable Layer-3, 12 Port 100/1000 fiber to copper ports Base-T rack mounted switch, 2x12 port 10G SFP module, easy to traffic manage, web configurable, Minimum IE 5.5 supported Cat-6 RG45 and OFC cable supported, less power consumption, Redundant Power Supply compatible, included fan Storage temperature -10C-40C with -5C - 40C operating temperature, relative humidity 5% 95%, Complete with all rack mounting accessories for completion.MR |
| 9 | Supply installation testing & commissioning of PATCH CORD LC-LC SM DUPLEX LENGTH- 1m As per Specs MR |
| 10 | SITC 15U wall mounted Networking Enclosure Closed rack with Front Glass door, rear steel door, castors, fans with fan tray, power strips and complete with all accessories as required. (upto size - 800mmW x 1000mmD) as required.(along with Horizontal Cable manager and vertical Cable manager, PDU with required 16 Amp Socket) MR |
| 11 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in theexisting surface/ recessed Steel/ PVC conduit as required. 2 run of cableMR |
| 12 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR 10.25.2 |
| 13 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR15.56 |
| 14 | 12 mm cement plaster of mix : 1: 4 (1 cement : 4 coarse sand) DSR-13.4.1 |
| 15 | Finishing walls with Acrylic smooth exterior paint of required shade: - New work (Two or more coat applied @ 1.43 Ltr./10 Sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 Sqm. DSR 13.47.1 |
| 16 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 |
| 17 | Providing and fixing 35 x35 x 5 mm Angle Iron @2.6 kg/m.DSR 10.31 |
| 18 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately DSR 16.53 |
| 19 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. DSR-2.6.1 |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR-4.1.8) |
| 21 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.1.2 |
| 22 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.2.2 |
| 23 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration DSR 2.35.3.1 |
| 24 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. D.S.R 2.25 (a) |
| 25 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR-5.22.6 |
| 26 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. DSR 2.27 |
| 27 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. (40mm thick) DSR 11.6.1 |
| 28 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. DSR 10.16.1 |
| 29 | Providing and fixing precoated galvanised iron profile sheets (size shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm (+.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277 ,in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polymer top coat 15-18 micron. sheet should have protective gaurd film 0f 25 microns minimum to avoid scratches during transportation and should be supplied in single lenth upto 12meter or as desired by engineer-in-chrge .The sheet shall be fixed using self drilling meter or as desired by engineer-in-charge.The sheet shall be fixed drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafter and trusses and including the cost of purlins , raftera and trusses and including cutting ti size and shape wherever required. DSR 12.50 |
| 30 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m² (DSR-12.7.1) |
| 31 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m² (DSR - 12.4.1) |
| 32 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class teak wood DSR9.7.1 |
| 33 | Supply, Installation, Testing, and Commissioning of Premium branded Multimedia Projector, 3200 lumens, 15000:1 contrast Ratio, XGA resolution. including material, labour, T&P etc. required for proper completion of work as per the direction of engineer in charge.MR |
| 34 | Supply, Installation, Testing, and Commissioning of Premium branded Projector Ceiling Mount Kit including material, labour, T&P etc. required for proper completion of work as per the direction of engineer in charge.MR |
| 35 | High Back Chair, Wooden Frame, Wooden Cushion Arm, Synchro KneeTilt, Gas Lift, Aluminium Base GEEKEN9 BYRON 1 (MR) |
| 36 | Visitor Chair, Chrome Cushion Arm,Chrome Plated Pipe Stand GEEKENCAMY 3 (MR) |
| 37 | Computer Desk, Particle Board Edge Banded Structure, Fixed Pedestal L1200 X D600 X H750GEEKENCOMPUTER DESK 5 (MR) |
| 38 | Single Seater Sofa, MS Powder Coated Leg, Wooden Frame, Leatherette TapestryGEEKENATLANTIS 1 (MR) |
| 39 | 3 Seater Sofa With SS Arms & Legs, Perforated Seat & Back, Powder Coated Beam Size in mm - 1750(L) X 710(D) X 755(H)GEEKENMAGNUM 7 (MR) |
| 40 | Conference Table, Particle Board Edge Banded Top (With Flip-Up Box) W12600 X D2470 X H750GEEKEN (MR) |
| 41 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides 10.29.1 |
| 42 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. DSR16.1 |
| 43 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.DSR16.91.2 |
| 44 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints exceptat sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineerin- charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).DSR16.69 |
| 45 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). 2.1DSR-2020 (H &L) |
| 46 | Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment). 2.2DSR-2020 (H &L) |
| 47 | Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 16 mm 2.4.3DSR-2020 (H &L) |
| 48 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.. 2.9DSR-2020 (H &L) |
| 49 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). 2.8DSR-2020 (H &L) |
| 50 | Rough dressing the trenched ground including breaking the clods. 2.5DSR-2020 (H &L) |
| 51 | Fine dressing the ground 2.7DSR-2020(H &L) |
| 52 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 90 cm dia, and 90 cm deep 2.14DSR-2020 (H &L) |
| 53 | Preparation of beds for hedging and shrubbery by excavating 60 cmdeep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately). 2.13DSR-2020 (H &L) |
| 54 | Providing and stacking of Hamelia (10x10x600mm) as per direction of the officer-in-charge. MR |
| 55 | Providing and stacking of CASURINA TOPIARY (300X300X1800MM) as per direction of the officer-in-charge. MR |
| 56 | Providing and stacking of PLUMERIA ALBA BUSHY (300X300X2400MM ) as per direction of the officer-in-charge. MR |
| 57 | Providing and stacking of SPIDER LILY (10x10x300mm) as per direction of the officer-in-charge. MR |
| 58 | Providing and stacking of FICUS PANDA (50x50x300mm) as per direction of the officer-in-charge. MR |
| 59 | Providing and stacking of IXORA (50x50x600mm) as per direction of the officer-in-charge. MR |
| 60 | Providing and stacking of Juniper (300X300X1500MM)as per direction of the officer-in-charge. MR |
| 61 | Providing and stacking of GROUND COVER GRASS as per direction of the officer-in-charge. MR |
| 62 | Providing and fixing LED SOLAR Street Light 18 WATT complete and as per the direction of Engineer-in-charge. red and as approved bythe Architects. MR |
| 63 | Providing and fixing Twin DustBin as per drawing attached, finishing etc complete and as per the direction of Engineer-in-charge. MR |
| 64 | Providing and fixing 5KW Solar panel complete and as per the direction of Engineer-in-charge. red and as approved bythe Architects. MR |
| 65 | Providing and fixing Precast RCC garden Benches with Hand Rest, Each bench consists of 2Nos. L-shape base support in grey cement colour of size 80mm X 450mm X 890 mm and base width 690mm, 1 No. RCC plank in red colour of size 1500mm X 400mm X 50mm, and 1 No. RCC plank in red colour of size 1500mm X 425mm X 50mm. Seating length of the bench is 1500mm, seating height of the bench is 450mm and total height of the bench is 1000mm as per drawing attached, finishing etc complete and as per the direction of Engineer-in-charge. MR |
| 66 | Supplying,installation,testing& commissioning of split direct exapansion air conditioner suitaable for opertion on A/C supply single phase 50HZ 230 Volts with inertmetially sealed compressor with air cooled condenser with DC inverter technology, motor capacitor and run capacitor ,relny and overload protector interal unit with one indoor and one outdoor unit .the condenser unit will be placed outside the roomon theterrace to avoid noise including standard lenght of suitable size copper tubing covered with insulation tube ( high wall chorded/cordless) suitable capacity 3core sheathed /PVC copper cable and battery operated wireless remote unit.2TR BEE Star Rated;5star EER3.4 MR Please Enable Macros to View BoQ information |
