|
| 1 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, completeType C1 1:3:6 (20mm graded aggregate) Set in cement mortar 1:6 including demolition of Precast concrete block masonary and removing rubbish off the premises complete all as specified and directed by Engr-in-charge. |
| 2 | M&L Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete sur faces including Taking down cement or cement lime plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish off the premises complete all as specified and directed by Engr-in-charge. |
| 3 | M&L Rendering 10mm thick Cement plaster 1:6 on fair faces of brick work or concrete sur faces rendering is to be finished even and smooth (without using extra lime or cement) including Taking down cement or cement lime plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish off the premises complete all as specified and directed by Engr-in-charge. |
| 4 | M&L Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete sur faces complete all as specified and directed. |
| 5 | M&L Rendering 10mm thick Cement plaster 1:6 on fair faces of brick work or concrete sur faces rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 6 | Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less tthan 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new surfaces. |
| 7 | Preparation of new plastered surfaces of walls and applying two coat of distemper oil emulsion white or tinted on walls over a coat of chalk whiting on plastered surfaces ,preparatory to distempring complete all as specified and as directed. |
| 8 | Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and as directed. |
| 9 | Preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of oil bound distemper on walls complete all as specified and as directed. |
| 10 | Preparation of old decorated wooden surfaces of ceiling and applying one coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of cement base paint on walls complete all as specified and as directed by Engineer-in-Charge. |
| 12 | M& L Glazed ceramiccoloured tiles in vertical surface 450x300x6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with, over and including rendering 10mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces and dismantling of wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 13 | M&L Non - skid /Anti Skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with including Screed bed or bedding layer of mortar 15 mm 1:6 thick for laying floor finishes and Dismantling of floor tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M&L Cement concrete as in flooring 1:2:4 type B-1 (20 mm graded aggregate) including Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground levels)and removing rubbish off the premises complete all as specified and as directed. |
| 15 | M&L Cement concrete in sub bases to floor,sunken floors, filling and mass concrete 1:2:4 Type B-1 (20 mm graded aggregate) including Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground levels)and removing rubbish off the premises complete all as specified and as directed. |
| 16 | M&L 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in sub base including Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground levels)and removing rubbish off the premises complete all as specified and as directed. |
| 17 | M&L 100 mm thick Cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in sub base including Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground levels)and removing rubbish off the premises complete all as specified and as directed. |
| 18 | M&L 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in Plinth protection including Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground levels)and removing rubbish off the premises complete all as specified and as directed. |
| 19 | M&L for Machine cut kota stone slab flooring 20-25mm thick over and including cement screed base of mortar C:M 1:4 of 15mm thick for laying floor finishes laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including dismantling of Stone slabs and tiles of any description or thickness in floors ,aprons,counters,plateforms etc laid bedded and pointed in any mortar and removing rubbish off the premises complete all as directed. |
| 20 | M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including cement screed or cement plaster in 1:4 of 10mmthick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of Stone slabs and tiles of any description or thickness in floors ,aprons,counters,plateforms etc laid bedded and pointed in any mortar and removing rubbish off the premises complete all as directed. |
| 21 | M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms,washroom counters and like over and including Screed bed or bedding layer of mortar 15 mm 1:4 thick for laying including point ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and Demolition of Stone slabs and tiles of any description or thickness in floors ,aprons,counters,plateforms etc laid bedded and pointed in any mortar and removing rubbish off the premises . |
| 22 | Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including Nanital or similar pattern roof coverings complete all as specified and directed by Engr-in-charge. |
| 23 | S&F for pre–painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 24 | S&F for pre–painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 25 | S&F Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed. |
| 26 | M&L for dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 27 | S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 28 | S&F for rolled mild steel sections as in column main and joist, channel, angle, or tee sections, fixed independently etc. (cut to ordinary lengths i.e. within 20mm of the length indicated, fixed with angle cleats or other connecting plates of Fe 410-W (Gde E-250) quality A complete all as specified and directed. |
| 29 | S&F Bands,straps, supports or stays for rainwater,ventilating pipes, including bols, if required; hooks(stay) heavy, for large gates,hook and pintle hinging fans,plain angle cleats for securing purlins to wood trusses or rafters,knee piece insert, two way and three way straps, plate washers and similar small article conforming to Fe-290 Gde-E-165 complete all as specified and directed |
| 30 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as directed. |
| 31 | M&L 3-layer PP-R Polypropylene random copolymer) concealed pipes Outer diameter of pipes 20 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including Taking up or down existing tubing and connections, including cleaning for re fixing or removal to store complete all as directed. |
| 32 | M&L 3-layer PP-R Polypropylene random copolymer) concealed pipes Outer diameter of pipes 25 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including Taking up or down existing tubing and connections, including cleaning for re fixing or removal to store complete all as directed. |
| 33 | S&F in repair Bib taps,15 mm bore fancy type cast copper alloy Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed. |
| 34 | S&F in repair Pillar taps,15 mm bore fancy type cast copper alloy, with capstan heads,chromium plated ,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as directed. |
| 35 | S&F in repair Stop valves, 15 mm bore fancy type chromium plated cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed. |
| 36 | S&F in repair Grating doom 100mm dia of PTMT complete all as directed. |
| 37 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as directed. |
| 38 | S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 39 | S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 40 | S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement |
| 41 | S&F in Repairs Vitreous China wash basin, white or coloured, flat back, size 600x480mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe with and including 32 mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed |
| 42 | S&F in Repairs 600mmx450mm bevelled edge mirror of selected quality glass, fixed to wall with plugs with chromium plated brass screws and cup washers etc complete all as specified and directed |
| 43 | S&F in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and directed |
| 44 | S&F in repair fancy type Premium quality Chromium plated Soap Dish Square or Rectangular complete all as specified and as directed .Note :- Design as approved by GE |
| 45 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed |
| 46 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed |
| 47 | Taking down Shutters of any description n exc 1 sq. m each complete all as specified and as directed |
| 48 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed |
| 49 | M&L 2nd class soft-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed in 2nd class soft-wood complete all as specified and as directed |
| 50 | M&L for 30mm thick 1st class softwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered partical board medium density, wood partical board with commercial face veneers: supplied and fitted to chowkhats complete all as specified and directed. |
| 51 | M&L for Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed |
| 52 | M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, 3 hinges, anodised aluminum snap beading screws etc, complete all as specified and directed |
| 53 | M&L for Anodised aluminium window and ventilator shutters, fixed type without sash bar,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed |
| 54 | M&L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) etc, complete all as specified and directed |
| 55 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 56 | Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed. |
| 57 | M&L for 4.8 mm Sheet glass,ordinary quality and glazing in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 58 | M&L for 4.8 mm Sheet glass,ordinary quality and glazing in square exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 59 | M&L for 4.8 mm thick Sheet glass,ordinary quality if sheet glass is ground or obscured or frosted, on one side in square exc 0.5 sq. m in each complete all as specified and as directed. |
| 60 | M&L for 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 61 | M&L for 125 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 62 | S&F 250 mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 63 | S&F 100 mm Aluminium anodised,barrel tower bolts of ex truded section and fixed complete all as specified and as directed. |
| 64 | S&F 150 mm Aluminium anodised,barrel tower bolts of ex truded section and fixed complete all as specified and as directed. |
| 65 | S&F 125mm Aluminium handles, cast type, anodised complete all as specified and as directed. |
| 66 | S&F 100mm extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 67 | M&L for preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 68 | S&F in repair for aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 69 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 70 | S&F in repair Anodised aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with suitable screws, including cutting the grill to proper opening size of fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and directed. |
| 71 | Providing & fixing false ceiling with semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles at all height with Glass fiber reinforced Gysum) false ceiling tile of size 595x595mm of appproved texure, design and patterns having moisture content less than 2% humidity resistance of 99%,NRCO.50 as per IS 8225:1987, Noncombustilble as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron sectin of 0.33mm thick (galvanized@ 120 grams per sqm inculding both sides) comprising of maint runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600*600mm, suspended from ceiling using galvanized mild steel items (galvanized@80 grams persqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm lengt and L-shape level adjuster of size 85x25x2mm galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws including dismantling of wall and ceiling boards (fibre,pulp,insulation,etc) or insulation boards/slab/blankets, any thickness including coverfillets The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge. |
| 72 | M&L 8-9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws/nails to timber frame work in repair including dismantling old decayed boards complete all as specified and directed |
| 73 | M&L Second class soft wood in Scantling as in wall & roof frame work in repairs, complete all as specified and directed |
| 74 | S&F in 2nd class hard wood plain fillets of sectional area exc 13 & nexc 25sqcm square ,rectangular or triangular in section clean sawn, secured with nails or brads, complete all as specified and directed |
| 75 | M&L for coloured chequred cement concrete tiles 30cmx30cmx22-25cm thick, set, joint and pointed in neat cement slurry in floors with grey cement and pigments over and including 20mm thick screed bed in cement mortar1:6 complete all as specified and directed. |
| 76 | Demolition of concrete in ground floors and paving n.exc 15cm thickness (below or above ground level, chequred cement tiles & paving block) complete all as specified and directed |
| 77 | Demolition of RCC of any description and in any position not otherwise specifically provided for, complete all as specified and directed |
| 78 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required , including cranking bending spirally for hooping for column,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-charge. |
| 79 | S&F PVC (SWR) 75mm bore vent cowl, complete all as specified and directed |
| 80 | S&F in repairs vitreous china urinal partition white of size 310x700mm complete all as specified and directed and directed. |
| 81 | S&F in repair vitreous china coloured squatting pan, orissa pattern , size 580x440mm with integral foot rests including all connection, flushing pipe, anti-syphonage pipe, etc complete including making good to floor complete all as specified and directed and directed. |
| 82 | S&F in repair 10 Litres cap PVC valveles, syphonic action type, flusing cistern,low level,white, with inlet, ball valve,float and handle including bracket complete all as specified and directed |
| 83 | S&F in repair vitreous china urinal, half stall type, white complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm,long brass screws, pointing around urinal back in cement ,including 32mm waste coupling of PTMT (half or full threaded ) complete all as specified and directed. |
| 84 | M&L cement concrete (Type B1 1;2:4 20mm aggregate ) in roof kerbs or mud stops, rounded or chamfered on edges in lintals upto 1.5m clear span, cills, steps, seismic and other similar bandss,plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height ,coping,kneelers, apex stones bed plates ,kerb not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 85 | S&F in repair 20mm dia SS coated premium quality curtain rails including fixing brackets etc complete all as specified and directed |
| 86 | Material and labour for applying single coat of 100% Premium acrylic emulsion paint having VOC less tthan 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm on old surfaces etc complete all as specified and directed |
| 87 | M&L for rubbing and polishing existing kota stone slab flooring 20-25mm and pointing in CM (1:3) and removing rubbish off the premises etc complete all as specified and directed |
| 88 | S&F in repair stainless steel 06 hooks cloth hanger incl all accessories etc complete all as specified and directed |
| 89 | S&F in repair stainless steel 03 hooks cloth hanger incl all accessories etc complete all as specified and directed |
| 90 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 91 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 92 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
