Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and cleaning the surfaces with wire brush and removal of the same outside defence land,complete,all as specified and as directed. |
| 2 | Dismantling of brick or terracing tiles of single layers on roofs and removal from site, complete all as specified and as directed. |
| 3 | Material and labour for Plain cement concrete 1:2:4 type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Matrerial and labour for 20mm thick grit plastering in 1:3 ( 1 portion cement and 3 portion 0 to 5 mm aggregate) over the roof surfaces with water proofing compound ( as per manufacturers instruction) all as specified and directed.NOTE: - WPC shall be measured and paid separately. |
| 5 | Material and labour for water proofing treatment with following application over roofs surface complete all as specified and directed : - (i) Applying bituminous primer at the rate of 0.4 Litres/Sqm as per IS 3384-1986 on prepared surfaces of roof. Surface shall be kept free, till the primer is impregnated and the solvent oil in the primer get evaporated.(ii) Applying one coat of blown type bitumen of grade 85/25 as binding material conforming to IS-73 at the rate of 1.2 Kg/Sqm.(iii) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.0 Kg/Sqm, black finish reinforced with non woven polyster matt, with a thermo fusible finish, torch application, overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturers instruction including preparation of surface.(iv) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.Note :- The water proofing treatment shall be carried out by the manufacturer or his authorised applicators in terms of clause 11.43 of MES Sch Part-I (2009). |
| 6 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises. |
| 7 | Material and labour for non skid coloured Ceramic tiles,first quality( of approved class , colour and design/ shade ) 7 to 8 mm thick (Square/ rectangular) area of each tiles not exceeding 0.38 sqm, ,as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over and including 15mm Screed bed in Cement mortar 1: 4 Complete all as specified and directed. |
| 8 | Material and labour for glazed coloured ceramic tile ( of approved class , colour and design/ shade ) of size 450 x 350 x 7mm thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10 mm thick rendering in cement mortar (1:3), rough finish to receive the tiles complete all as specified and directed. |
| 9 | Material and labour for Coloured Vitrefied Ceramic tiles 10 mm thick (Square/rectangular) of light shade , polished, area of each tile not exc 0.36 sqm , fixed as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles including 15mm Screed bed in Cement mortar 1: 4 Complete all as specified and directed. |
| 10 | Material and labour for Coloured Vitrefied Ceramic tiles 10 mm thick (Square/rectangular) of light shade , polished, each tile size 600mm X 100mm in skurting/ dados etc exc 0.36 sqm , fixed as in floor surface etc set and jointed in neat cement slurry and pset and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick backing layer in CM 1:3 complete all as specified and directed. |
| 11 | Material and labour for Machine cut Kota stone slab flooring 18-22 mm thick, for staircase step in single piece (of length not more than 1200 mm), laid over over & including 15 mm thick (average thickness) cement mortar (1:3) screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete, including provn of two Nos 3x3mm grooves at tread of each step complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material and labour for Machine Cut Kota stone slab 18-22 mm thick on vertical surfaces like riser of steps, skirting, in single piece (of length not more than 1200 mm) over & including 10 mm thick (average thickness) cement mortar (1:3) screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Mirror finish), complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material and labour Granite jet black shade, 15-18 mm thick, machine cut, machine polished, bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 15 mm thick (average thickness) cement mortar (1:4) screed, as in cooking platform, shelves, RCC counters, window cills & similar situations, complete all as specified. |
| 14 | Material and labour for Baroda Green marble, 15-18 mm thick, machine cut, lapd over & including 15 mm bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 15 mm thick (average thickness) cement mortar (1:4) screed, as in cooking platform, shelves, RCC counters, window cills including jams & similar situations, complete all as specified. |
| 15 | Rounding to edges of stone (of any description) slabs one edge, such as in steps, cooking platform, and other similar situations including rubbing and polishing (mirror finish), complete all as specified and directed by Engineer-in-Charge. |
| 16 | Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed |
| 17 | Material and labour for brick work withold size sub class ‘B’ bricks,straight or curved on plan to any radiousl built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 18 | Material and labour Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified and directed . |
| 19 | Demolition of reinforce concrete of any description and in any position not otherwise specifically provided for as in for existing RCC tanks |
| 20 | Material and labour for reinforced cement concrete (nominal mix) ,1:2:4, type B-0 using 12.5mm graded stone aggregate as in chajjas, faica, and the like etc complete all as specified and directed |
| 21 | Material and labour for MS TMT bars upto 8 mm dia and over , cut to length bent to shape required including cranking bending spirally for hooping for columns and binding with ms wire (annealed) not less than 0.9mm dia or welding to existing reinforecement all as specified and as directed. |
| 22 | Material and labour fair finished formwork to chullah hoods, chajjas, troughs and similar items including edges all as specified and directed |
| 23 | Material and labour for cutting holes n. exc 150 Sq. cm into or through brick walls built in cement mortar and making good in cement concrete 1:2:4 type B01 as required complete. |
| 24 | Material and labour for Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings etc. or cutting out defective brick work for under- pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50 m form site, complete all as specified and directed by Engineer-in-Charge. |
| 25 | Material and labour Forming jambs, etc to openings, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work; new work built in cement mortar 1:6 complete all as specified and directed. |
| 26 | Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc compplete all as specified and directed. |
| 27 | Material and labour for preparation of exposed brick wall surface by cleaning the surface with wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks. Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day.Note : Further treatment over the surface so achieved will be carried out only after approval of the same by GE. Note:- This item shall be executed by authorised applicator only. for carrying out efflorescence treatment to exposed and prepared wall surface here–in–above in following sequence :–(a) Prime the prepared surface with one of the following product mixed with cement in 1:1 ratio as bonding agent :–(i) Pidicrete URP of M/S Pidilite (ii) Sika Latex of M/s Sika (iii) Nitobond SBR Latex of M/s FOSROC(b) Immediately after priming the surface PMM (Polymer Modified Mortar) to be applied \\"BY HAND\\" while the primer is tacky. PMM should be prepared by mixing one of the following compounds in Cement Mortar 1:3 as per manufacturer's instructions :–(i) Pidicrete URP of M/S Pidilite (ii) Sika Latex of M/s Sika (iii) Nitobond SBR Latex of M/s FOSROC(c) PMM surface should be allowed to dry one day. After that it shoud painted with two coats of one of the following compound mixed with cement only in ratio of one part of selected compound and one point fire part of cement :–(i) Pidicrete URP of M/S Pidilite(ii) Sika Latex of M/s Sika(iii) Nitobond SBR Latex of M/s FOSROC(d) Now apply two coats of one of the following compound over the surface. These compounds are to be used as per manufacturer instructions :–(i) Pidifin 2K of M/S Pidilite (ii) Brush Coat of M/s Sika (iii) Brush Bond of M/s FOSROCNote : Both coats should be perpendicular to each other and gap between two coats shall be minimum 6 hours.(e) Sprinkle loose coarse sand after second coat while surface is tacky.Note: (i) Item will be executed by authorised applicator of the selected /approved company only. (ii) Every stage of work will be approved by GE then only next layer will be executed by contractor. |
| 28 | Material and labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair (without using extra cement) on walls in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 29 | Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound complete all as specified and directed by Engineer-in-Charge. NOTE:WPC will be measured and paid for separately |
| 30 | Supply only liquid water proofing comound ISI Marked complete all as specified and directed. |
| 31 | Material and labour for rough cast plastering over and incl 10 mm thick rendering in cement mortar 1:3 and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. Rough cast plaster shall be applied as specified clause 14.22 of SSR Part-I . |
| 32 | Material and labour for rendering 5 mm thick on fair faces of concrete surface as in cement mortar 1:3 , finished even and smooth without using extra cement as in ceiling, and similar other work , complete all as specified and directed |
| 33 | Material and labour for Preparation of new plastered surface of Two coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over a coat of 2mm thick putty , as per manufacturer's specification. complete as specified and directed. |
| 34 | Material and labour for Complete removal of existing treatment of wall Old plastered surface of Two coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete , over as coat of 2mm thick putty as per manufacturer's specification. complete as specified and directed. |
| 35 | Material and labour two coat of oil bound distemper of required tint on newly plastered surfaces of ceiling after preparation of surface and over a coat of primer over a coat of 2mm thick putty complete all as specified and directed. |
| 36 | Material and labour for complete removal of existing treatment and of ceiling by steeel wire brushes and scaroing down smooke ols plastered surfaces of ceiling promer on spots moulds , moss and effloricent salts and treating oil and greassy spots incl wasjing down with water etc. applying two coats of oil bound distemper over a caoat of alkali resisten over a coat of 2mm thick putty complete all as specified and dfirected. |
| 37 | Material and labour for prepration of new plastered surfaces of walls ,chajjas and appliying two coats of 100% anti fungal acrylic exterior emulsion paint in appproved shade over a coat of primer incl 2mm wall care putty withl neccesary scaffolding complete all as specified and directed. |
| 38 | Material and labour for complete removal of existing treatment by broomig down on surfaces of walls etc. by steeel wire brushes and scaraping down smooke soots,moulds effloricent salts and treating oil and greassy spots incl washing down with water etc. applying two coats of 100% anti funlgal acrylic emusion paint in approved shade over a caot of alkali resisten complete all as specified and dfirected. |
| 39 | Taking down chowkaths or frames n.exc 1.5 sqm (without takingoff shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc, complete all as specified and directed by Engineer-in-Charge. |
| 40 | Taking down chowkaths or frames Exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc, complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply and fixing Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including fixing lugs, 125 mm size hinges, lock strike plate, etc., complete, as specified, supplied and fixed . |
| 42 | Supply and fixing Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including fixing lugs,125 mm size MS hinges, lock strike plate, etc., complete, as specified, supplied and fixed . |
| 43 | Material and labour for 40mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge. |
| 44 | Material and labour for 35 mm thick factory made glazed & Skelton shutter of IInd class H/Wood open rebated & prepared to receive glass or gauze etc without sash bar open rebated with edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass or guage etc size ofstiles rails etc as specified in sec 8 clause 8.24 (a) of SSR Part-I (2010). |
| 45 | Supply and fixing solid PVC door frames of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, Supply and fixing in opening as per specification & drawing . |
| 46 | Material and labour for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification colour WOOD COLOUR |
| 47 | Supply and fixing mild steel butt hinges of 100mm length, cold rolled, medium weight, ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250 mm long and fixing with bolts extruded sections complete all as specified & directed. |
| 49 | Supply and fixing 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified & directed. |
| 50 | Supply and fixing aluminium anodised extruded fabricated type handle 150 mm long complete all as specified & directed. |
| 51 | Supply and fixing 150 mm overall length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete as all spfd and directed by EIC |
| 52 | Material and labour for painting to steel surfaces of any description not other wise described over 10cm width or girth with two coats of synthetic enamel paint incl preparation of new surfaces complete all as specified and directed by Engr-in-charge |
| 53 | Material and labour for painting to steel surfaces of any description not other wise described over 10cm width or girth with two coats of synthetic enamel paint over one coat of red oxide primer incl preparation of new surfaces complete all as specified and directed by Engr-in-charge |
| 54 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Note: The unit rate quoted by contractor includes cost of glass/wire mess and includes all other connected accessories including locking arrangement. |
| 55 | Material and labour for factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Slidingmesh Sash (42mm x 57mm) Sliding interlock (Onevertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories area not exceeding 2.00 sqm each (Note: The unit rate quoted by contractor includes cost of glass/wire mess and includes all other connected accessories including locking arrangement. |
| 56 | Material and labour for 4.8 mm thick sheet black/dark glass ordinary quality and glazing n exceeding 0.50 Sqm in each pane fixed with including rubber gasket in aluminium frame work complete all as specified and directed. |
| 57 | Material and labour for 4.8 mm thick sheet glass one side frosted and glazing n exceeding 0.50 Sqm in each pane fixed with including rubber gasket in aluminium frame work complete all as specified and directed. |
| 58 | Supply and fixing 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.4 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 59 | Supply and fixing rubber strips 3 to 4mm thick & 65mm to 75mm wide fixed on bottom rail of door for covering gaps between door & floor to aviod entry of insects,dust etc complete . |
| 60 | Supply and fixing stainless steel curtain rod 25mm dia having wall thickness 1.6mm fixed with and including stainless steel decorative brackets, two lotto for each road length at both end etc as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 61 | Supply and fixing (in repair) 150 mm helical door spring to mild steel chowkhats, complete all as specified & directed by Engineer-in-Charge. |
| 62 | Supply and fixing in replacement mild steel almirah shutters with frame, exceeding 1.5 Square metre , made of 0.91mm thick mild steel sheet in two leaves as built in furniture in cupboards including locking arrangement with mortice lock of mild steel, vertical type, 65mm size, 2 lever, ISI marked with duplicate keys and handle, etc. (all as per Godrej pattern) including two coats of spray painting over a coat of red oxide primer complete fixed on brick or concrete wall with minimum six numbers of 10mm dia and 100mm long mild steel bolt with washer and nut in cement mortar (1:4) or PCC 1:2:4, type B-0, complete all as specified and directed by Engineer-in-Charge. |
| 63 | Demolition of cement concrete (any type)for existing sunken portion of WC/Floortrap incl removing of all debris from site to a distance exc 250 m but not exc 500m and deposited where directed incl cleaning of surface with wire brushes and water complete all as specified and directed |
| 64 | Material and labour as in repair for 40mm dia (Bore) GI pipe medium grade as in spout complete all as specified and directed. |
| 65 | Material and labour for PCC 1:5:10 type E2 using 40mm graded aggrgate as in filling in sunken portion floor ,rounded or chamfered on edges complete all as specified and directed. |
| 66 | Material and labour for sunken floor water proofing treatment complete all as under - (a) scrapping the surface with wire brush and cleaning with water and allow to dry (b) Applying cement slurry @ 3.0 kg/sqm duly mixed with water proofing compound (C) 15 mm thick cement plaster 1:3 with additional floating/setting coat mixed with water proofing compound as per manufacture instruction ( the corner will made rounded in concave shape) (D) Applying cement slurry @ 3.0 kg/sqm duly mixed with water proofing compound (E) apply one coat of hot bitumin grade 85/25 conforming to IS 702 @ 1.2 kg/sqm . (f) supply and laying APP with nin woven polyster reinforced sheet 3mm thick weight not less than 3.00 kg/sqm (G) applying one coat of hot blown bitumin grade 85/25 conforming to IS-702 @1.20 kg/sqm (H) curing the sunken portion with water min 48 hours by ponding. (Water proofing shall measured and paid separately) |
| 67 | Material and labour for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) 75 mm thick as in sub base, finishing the surface even and rough to receive floor complete all as specified and directed. |
| 68 | Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 15 mm dia pipes complete all as specified and directed. |
| 69 | Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed. |
| 70 | Supply, fixing, 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 71 | Supply, fixing, 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 72 | Supply and fixing fancy type Angle stop cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 73 | Supply and fixing in repair 20mm dia stop valve brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 20 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 74 | Supply and fixing in repair bib taps, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 75 | Supply and fixing 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles scrwed down suitable for 15mm bore pipe or union in repair complete all as spd. |
| 76 | Supply and fixing in repair wall mixer ,brass, fancy type, chromium plated for mixing hot & cold water, screwed down, for iron pipe 15 mm bore complete all as specified and directed. |
| 77 | Supply and fixing double pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 78 | Supply and fixing in repair white vitreous China wash down water closet pan (pedestal) pattern, with &including trap (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 79 | Supply and fixing PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed |
| 80 | Supply and fixing in repairs, vitereous china wash basin, white, flat back, size 550 x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets for and pinning in ends of brackets or erecting stand but exclusive fixing of supply and waste pipe. |
| 81 | Supply and fixing 40 mm bore Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/cmsq. complete all as specified and directed. |
| 82 | Supply and fixing (in repair), sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated guard and railing 60cm long, complete all as specified and directed by Engineer-in-Charge. |
| 83 | Supply and fixing for corner glass shelf with CP stand complete all as specified and directed by Engineer-in-Charge. |
| 84 | Supplying and Fixing for brass, chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete, all as specified and as directed by Engr in charge . |
| 85 | Supply and fixing in repair toilet paper holder ,brass, chromium plated,, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. |
| 86 | Supply and fixing in repair soap dish, brass, chromium plated,, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. |
| 87 | Supply and fixing in repair chromium plated hand shower (health fauset), telephonic type with 8mm dia, 1 meter long pvc tube cover CP flexible with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed. |
| 88 | Supply and fixing fancy type PVC Mirror cabinet (PTMT Alloy) with mirror of size 500x400 , fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed by Engineer-in-Charge. |
| 89 | Supply and fixing 600mmx450 mm size bevelled edge looking mirror of selected quality glass mounted on 12mm thick marine plywood with powder coated aluminium frame alround and fixed with wooden plugs, CP screws, cup and washers. |
| 90 | Supply & fixed in repair fancy type shower rose125mm dia size of Rim and 30cm long CP brass pipe with swiwel joint in complete all as specified and directed by Engineer-in-Charge. |
| 91 | Supply & fixed in repairs stainless steel grating openable 100mm sqmm size with/without hole including fixing with white cement complete all as specified and directed by Engineer-in-Charge. |
| 92 | Dismantling old unserviceable cement concrete/PVC water tanks of capacity exc 250 ltrs & n.exc 500 Ltrs including supply & fixing of PVC water storage tank 500 ltr capacity HDPE triple layered ,white colour cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection incl locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight 20 mm - 210 gms ) fixed as in repairs. Note : (i) Inlet, outlet & wash out pipe will be measured paid for separately. |
| 93 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.(cleaning reparing etc measured separately) 500 litre complete all as specified and directed by Engineer-in-Charge. |
| 94 | Dismantling boarding, any description, fixed in any position with nails/screws complete all as specified and directed. |
| 95 | Supply and fixing for LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum) of both side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen /bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete complete all as specified and directed by Engineer-in-Charge. |
| 96 | Supply and fixing for LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum) of single side rigid lamination of approved colour and other side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s specifications complete complete all as specified and directed by Engineer-in-Charge. |
| 97 | Supply and fixing for 12mm thick LEAD FREE PVC Celuka ply (Minimum density 600kg/Cum) of fixed with stainless steel screws, solvent cement /adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete complete all as specified and directed by Engineer-in-Charge. |
| 98 | Supply and fixing for stainless steel 304 grade wire basket cutlery of size 370 x 485mm premium quality fixed in position complete complete all as specified and directed by Engineer-in-Charge. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 99 | Supply and fixing for stainless steel 304 grade wire basket (average weight 2.5 to 4 Kg per Basket) of pull out type like plain /cup & saucer /bottle /multi purpose /2–3 shelf basket etc for kitchens of required size fixed in position complete complete all as specified and directed by Engineer-in-Charge. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 100 | Supply and fixing for Ball bearing runners 45mm telescopic (KTS–20) full extension load capacity minimum 50Kgs complete complete all as specified and directed by Engineer-in-Charge. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ |
| 101 | Supply and fixing for ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finished complete complete all as specified and directed by Engineer-in-Charge. Make: HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 102 | Supply and fixing for Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete complete all as specified and directed by Engineer-in-Charge. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 103 | Supply and fixing stainless steel plate rack standard size 1000mmx750mm mm complete and fixing with rawl plug and steel screws of wt not less than 8kg each |
| 104 | Supply and fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortor to dwarf wall ot cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x 330x160mm incl all fittings ie CP waste coupling, waste pipe complete all as specified and directed by Engineer-in-Charge. |
| 105 | Demolition and breaking up drain pipes 75/100 mm dia, SGSW, AC, PVC, concrete pipe including fittings, complete all as specified and as directed. |
| 106 | Supply and fixing PVC (SWR) 75mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed by Engineer-in-Charge. |
| 107 | Supply and fixing PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed by Engineer-in-Charge. |
| 108 | Supply and fixing PVC (SWR) bends of 75mm radius, complete all as specified and directed by Engineer-in-Charge. |
| 109 | Supply and fixing PVC (SWR) bends of 75mm radius with access door , complete all as specified and directed by Engineer-in-Charge. |
| 110 | Supply and fixing PVC (SWR) bends of 110mm radius, complete all as specified and directed by Engineer-in-Charge. |
| 111 | Supply and fixing PVC (SWR) junction single, (Single T) equal or unequal of 110mm dia with access door all as specified and directed |
| 112 | Supply and fixing PVC (SWR) vent cowl of 110mm dia, complete all as specified and directed by Engineer-in-Charge. |
| 113 | Material and labour for salt-glazed stoneware gully traps,150x150 square or round mouthed, type \\"P\\" setting and jointing to drains with cm 1:1., complete all as specified and directed by Engineer-in-Charge. |
| 114 | Supply and fixing in bands starps, supports or strays for rain waterpipes hooks stay for heavy large gates, hooks and pintle hinges clamps , hold fasts, wall ties,hooks and similar small items Fe 290 gde E-165 or Fe 310 complete all as specified and directed by Engineer-in-Charge. |
| 115 | Material and labour for 50 mm thick Plain Cement Concrete (Cement concrete) 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection finished even and fair and making 30mm deep joints at every 3 metre interval and at every corner and filling the joints with bitumen of grade 85/25 and sand mixture 1:3 complete all as specified and directed |
| 116 | Material and labour for pre-cast RCC 1:2:4 type B-1 (using 20mm graded mechanically crushed stone aggregate) as in cover slabs (for manhole, drain etc) and simililar articles with plain faces including necessary form work etc, set in cement mortar 1:4 complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately under respective items ) |
| 117 | Material and labour TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally, hooking ends and binding with mild steel wire not less than 0.9 mm dia(annealed) complete all as specified and directed by Engr-in-Charge. |
| 118 | Material and labour for post anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed by the EIC. |
| 119 | Material and labour for post anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed by the EIC. |
| 120 | Material and labour for post anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed by the EIC. |
| 121 | Material and labour Roof Trusses (framed) , trussed , purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete as all spfd and directed by EIC |
| 122 | Material and labour rolled mild steel in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes incl. rivetting, welding etc complete all as specified and directed by Engineer-in-Charge. |
| 123 | Supply and fixing in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge. |
| 124 | Supply and fixing in repair Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge. |
| 125 | Material and labour 5mm thick PVC hollow interlocking wall panelling of width 250mm for wall paneling for fixing on to wall with screws and solvent alongwith corner and u channel beading of colour choice including dismantling old boarding/panelling all as specified and directed.Note : Rate will be includive any electrical board, fittting etc effected for removing and refixing and making good all as directed |
| 126 | Material and labour for 100mm thick plain cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge. |
| 127 | Material and labour for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed by Engineer-in-Charge. |
| 128 | Material and labour for providing cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in copings, slightly, rounded or chamfered angles complete all as specified as directed. |
| 129 | Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling rosees, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc. |
| 130 | Taking down Ceiling fan any size or any type and deposited to MES store yard complete all as specified and directed. |
| 131 | Taking down Exhaust fan any size or any type and deposited to MES store yard complete all as specified and directed. |
| 132 | Taking down old unserviceable single phase Electric Meter and deposited to MES Store Yard complete all as specified and directed. |
| 133 | Taking down old and unserviceable submain wiring any size /type including earth wire complete with batten/conduit etc complete all as specified and directed |
| 134 | Taking down old Water Heater (Geyser) any type/Size/Capacity with all accessories after removing of all incoming/outgoing pipe line connection and deposited to MES Store Yard for repair complete all as specified and directed. |
| 135 | Taking down old unserviceable VPTN MCCB DB//MCB SPN 8way any of size/capacity complete all as specified and directed. |
| 136 | Taking down old unserviceable MCB SPN/MCB SP of any size/capacity complete all as specified and directed. |
| 137 | Material and labour for point wiring in conduit using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH PVC insulated and unsheathed stranded cable ISI 694 marked, TEC and FIA approved drawn through and including PVC non metallic/mettalic conforming to IS 3419 heavy duty concealed/Surface conduit and including replacement of its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI sunken boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly coated with two coats of anti corrosive paint over a coat of red oxide primer internally and externally including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over sunken box for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan/Exhaust fan point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan Point controlled by one switch complete including All tests to be carried out in accordance with Indian Electricity Rules 1956 as well as IS-732-1963 Code of Practice for Electrical Installationsall as specified and as directed.NOTES : - 1. Switch, socket and fan regulators to be measured and paid for separately.2. All chases will be cut by chase cutter only. |
| 138 | Description all as per item No 137.00 here in before but for socket out let point 5 Amps on same board |
| 139 | Description all as per item No 137.00 here in before but for socket out let point 5 Amps on independent board |
| 140 | Description all as per item No 137.00 here in before but for one two way point controlled by two switch. |
| 141 | Description all as per item No 137.00 here in before but for one bell point controlled by one bell push. |
| 142 | All as per srl item No 137.00 above but point wiring for one socket out let 15 & 5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor |
| 143 | All as per srl item No 137.00 above but point wiring for one Plug & socket (independent) controlled by one MCB with using 4.00 Sq mm (nominal area) stranded copper conductor for Geyser |
| 144 | Supply and fix in repair modular switch 1 way 6A, 1 module , 230 volt , AC supply, complete all as specified and directed. |
| 145 | Supply and fixing in repair modular switch 2 way 6 Amps, module, 230 volt , AC supply, complete all as specified and directed. |
| 146 | Supply and fixing in repair modular switch 1 way, 16A,1 module, 230 volt , AC supply, complete all as specified and directed. |
| 147 | Supply and fixing in repair modular socket outlet 6A-2/3 Pin combined 2 module, 230 volts , complete all as specified and directed. |
| 148 | Supply and fixing I repair modular socket outlet 6/16-2/3 pin combined 2 modules, 230 volts complete all as specified and directed. |
| 149 | Supply and fixing in repair modular fan regulator 2 modules, 120W, 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified. |
| 150 | Supply and fixing in repair modular bell push, 6 Amps one module , 230V,50Hzs, supply complete all as specified and directed |
| 151 | Supply and fixing in repair call bell ding dang /musical type single pole complete all as directed |
| 152 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. |
| 153 | Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified. |
| 154 | Supply and fixing Decorative ultra slim linear surface mounted Aluminium Extruded LED lighting fixture (4 feet length), 20Watt LED with input voltage AC 220V-240V, 50 Hz with colour tempetrature 6500K and system Lumens not less than 2000 lumens with High efficiency long life LED with lumen efficacy not less than 100 lm/W, Degree of protection should be IP 20 complete with Integral electronic driver (SMPS Based constant current out put) with lower THD, Output short cicuit protection/Open circuit protection, surge voltage protection up to 2KV and PF should be not less than 0.95, conforming to the IS- complete all as specified and directed by Engr-in-charge. Note: (02 Year warrenty certificate may please be submitted to Engineer in Charge) |
| 155 | Supply and fixing LED light fitting 9/12 W wall mounting fixture (Sketch type) suitable for retrofit LED lamp compact and energy efficient epoxy powder coated light luminaire complete all as specified and as directed by Engineer in-Charge. |
| 156 | Supply and fixing surface mounted wall Mirror LED light compact & sturdy 10W LED decorative fixture with anti glare polycarbonate diffuser, multi purpose lighting solution & applications all accessories & fixtures, internally prewired and connecting by providing copper flexiabkle wire 23/0.0076 mm twin core upto fitting completeall as specified and directed. |
| 157 | Supply and fixing LED surface mounted bulk head luminaries 8-10W with min 800 lumen, industrial model IP65, aluminium housing , surge protection including driver & LED etc complete with all accessories connecting with copper conductor flexiable cable from celing rose to connector of the light complete all as specified and directed. |
| 158 | Supply and fixing LED Bldg security light fitting of capacity 35-45 Watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safty input voltage range 170 to 270 volts, with IP66 protection and other connected accessories including service bracket of MS pipe25/32mm bore of length 0.09 mtr with MS clamps, bolts, nuts and washers and suitable reducer for connecting to MS pipe as required at site and making electrical connection complete all as specified and directed. |
| 159 | Supply and fixing Single Pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps |
| 160 | Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 6.0 sq mm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 6.0 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete, all as specified and directed. |
| 161 | Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 4.0 sq mm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 4.0 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete, all as specified and directed. |
| 162 | Supply and fixing sheet metal enclosures vertical distribution board VTPN, (MCCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including adjustable thermal setting MCCB 4 Pole, 125 Amps 25 KA as incomer and MCB s as out going complete with making suitable size of MS cabinet 2 mm thick dully grouted on the wall (flush) with opening arrangement including and making connection with suitable size of lugs and making good the disturbed surface matching with existing surface all as specified and dire |
| 163 | Supply , insatallation, testing of SPN distibution board 8way,double door , IP 43 , as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles complete all as specifid. |
| 164 | Supply and fixing MCB SP single pole, 240 volts, 50 Hz, breaking capacity , 6 to 32 Amps, complete all as specified. |
| 165 | Supply and fixing MCB SP single pole, 240 volts, 50 Hz, breaking capacity , 40-63Amps, complete all as specified. |
| 166 | Supply and fixing SPN 40 -63 Amps rating ,240 volts, 50 Hz, breaking capacity 10 KA complete all as specified and directed. Please Enable Macros to View BoQ information |
| 167 | Supply and fixing SPN 40 -63 Amps rating ,240 volts, 50 Hz, breaking capacity 10 KA complete all as specified and directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
