|
| 1 | Dismantling of mild steel work of any description, complete all specified and directed. |
| 2 | Dismantling AC corrugated, semi corrugated sheets in roof covering, complete all as specified and as directed by Engineer-In-Charge. |
| 3 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including any pattern roof coverings, complete all specified and directed. |
| 4 | S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & directed, complete all specified and directed. |
| 5 | S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all specified and directed. |
| 6 | S&F for on asbestos ceiling board of 4mm thick, designer, in ceiling fixed as per manufacturer’s instructions, including powder coated galvanised iron snap grid frame work of main and tee (weight not less than 240gm/Rm), angle (weight not less than 217 gm/Rm), grid size 595x595mm, for false ceiling all as specified, and hangers not less than 3mm nominal dia, galvanised iron (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of galvanised iron wire of 2.0mm dia, length as required at site and expansion hold fasteners 12.50mm dia, 40mm long including dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets,complete all specified and directed. |
| 7 | S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, confirming to grade Fe 410-W (Gde E-250 quality-A), complete all as specified and directed. |
| 8 | Dismantling of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed. |
| 9 | M&L for brick work with sub class 'B' bricks old size straight or curved in plane exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 10 | All as per above but except brick. |
| 11 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 12 | M&L for rendering 10 mm thick in cement mortar 1:6 on any surfaces of brick work, finished even & smooth without using extra cement, complete all specified and directed. |
| 13 | M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement,complete all specified and directed. |
| 14 | M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of alkali resistant primer over two coats of wall care putty, complete all as specified and as directed by Engineer-In-Charge. |
| 15 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint over a coat of primer , complete all as specified and as directed. |
| 16 | M&L for preparation of old/ decorated, un-decorated, plastered or unplastered surfaces of walls including complete removal of existing treatment and applying two coats of distemper oil emulsion over one coat of alkali resistant primer over two coats of wall care putty, complete all as specified and as directed by Engineer-In-Charge.. |
| 17 | M&L for preparation of old/ decorated, un-decorated, plastered or unplastered surfaces of walls including complete removal of existing treatment and applying two coat of cement based paint, complete all as specified and as directed by Engineer-In-Charge. |
| 18 | M&L for complete removal existing treatment from old surface of walls and applying two coats of exterior emulsion paint (Apex Ultima or equivalent), over one coat of alkali resistant primer including preparation of old surfaces, complete all as specified and as directed by Engineer-In-Charge. |
| 19 | M&L for preparation of new plastered surfaces of walls and applying two coats of exterior emulsion paint over one coat of alkali resistant primer, complete all as specified and as directed by Engineer-In-Charge. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 21 | M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates finishing concrete surface even and fair without using extra cement including necessary formwork, complete all as specified and as directed. |
| 22 | M&L for 100mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregates as in sub bases of floors and pavings, complete all as specified and as directed. |
| 23 | M&L for 100mm thick plain cement concrete 1:2:4 type B-1 mix laid in alternate panels including necessary formwork of MS Channel and proper clamps, complete all as specified and as directed. |
| 24 | M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade A, complete all as specified and as directed. |
| 25 | M&L for non-skid ceramic coloured tiles of size 400x400 mm and 7 to 8 mm mm thick, set and jointed in neat cement slurry (3 Kg cement per Sqm) and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6,complete all as specifed and directed. |
| 26 | M&L for non-skid ceramic coloured tiles of size 600x600 mm 7 to 8 mm mm thick, set and jointed in neat cement slurry (3 Kg cement per Sqm) and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6, complete all specified and directed. |
| 27 | M&L for non-skid ceramic coloured tiles of size 600x600 mm 7 to 8 mm mm thick, set and fixing in skirting/dado or any other vertical surfaces and pointed in white or coloured cement to match and including 10 mm thick for laying floor finishes in cement mortar 1:4, complete all specified and directed. |
| 28 | M&L for machine cut kota stone slab, minimum size shall be (550x550mm), flooring 16-18 mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish (mirror finish) complete, over and including screed bed or bedding layer of mortar 20mm thick in cement morat 1:3, complete all as specified and as directed. |
| 29 | M&L for machine cut kota stone slab, (size shall in one length), 18-20mm thick, as in riser of steps, skirting, dado and pillar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, and including laid over screed bed or back plastering layer of mortar 15mm thick in cement mortar 1:4, complete all as specified and as directed by Engineer-In-Charge. |
| 30 | M&L for makrana white marble work (table rubbed and polished), 16-18mm thick, as in steps, jambs, pillars, window-cills, cooking platforms and like with 20mm thick screed bed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of marble, complete all as specified and as directed by Engineer-In-Charge. |
| 31 | M&L for glazed ceramic jointless tiles in vertical surface/dado, size 450x300x6/7 mm thick, on vertical surface of wall such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade/colour of tiles including 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed. |
| 32 | M&L for black granite (of any type) 18-20mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and over 20 mm thick screed bed in cement mortar 1:3, complete all as specified and as directed. |
| 33 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 34 | M&L for 75mm thick, plain cement concrete M-10 1:3:6, type C-1 (using 20mm graded crushed stone aggregate), as in plinth protection and providing the joints throughout the thickness, filled with mastic filling comprising bitumen 85/25 grade and sand mixture 1:3 by weight, complete all specified and directed. |
| 35 | Taking down chowkhat or frame with shutters (without taking off shutters from frames) exc. 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed by Engineer-In-Charge. |
| 36 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, complete all as specified and directed by Engineer-In-Charge. |
| 37 | M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size of frame 125x60mm, complete all as specified and as directed . |
| 38 | M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size of frame 105x60mm, complete all as specified and as directed. |
| 39 | S&F for factory made steel window, box type, using ERW hollow 'P' section, comprising double frame for and including gauged and glazed skeleton shutter with wire mesh and plain sheet 4mm thick glass, jointed internally and made with flat iron 40x4mm complete including grill/ guard bars of 8mm square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs etc, complete all as specified and as shown in drawing No- CEUZ/TD-1517/15, sheet No- 1/3 to 3/3 and as directed . Note :- Cost of window shall include all members and spare parts as elaborated in the Drwaing and in the specifications and nothing shall be paid extra seperately. |
| 40 | S&F for anodised aluminium powder coated (minimum thickness of powder coating 50micron) frame for window, ventilator with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed. |
| 41 | S&F for powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specified and as directed. |
| 42 | S&F for 5.0 mm frosted sheet glass, ordinary quality fixed in windows in square n exc 0.5 Sqm in each pane fixed in aluminium partion, complete all as specified and as directed . |
| 43 | S&F for 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with both faces covered with decorative face veneer with lipping/frame to match complete all as specifed and directed. |
| 44 | S&F for 40 mm thick flush shutter prepared to receive glass/ wire cloth, etc. (in 2 panels n. exc 0.4 sqm each) with sash bars, solid core construction, with block board core and plywood face panels, commercial type on both sides with both faces covered with decorative face veneer with lipping/frame , including stainless steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm etc.; supplied and fitted to chowkhats, complete all as specified and as directed . |
| 45 | S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rein forced with M.S. square tube supplying and fixing in opening as per specification and drawing, complete all as specified and directed by Engineer-In-Charge. |
| 46 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded etc. with suitable PVC sheet beading including hinges etc, complete all as specified and directed by Engineer-In-Charge. |
| 47 | M&L for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staging for of water tanks, cooler stand and similar work conforming to Fe-290, Gde-E-165, including cutting and welding and taking down existing steel.complete all as specified and as directed. |
| 48 | S&F for mild steel 1.25 mm thick plain sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched;including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and as directed by Engineer-in-Charge. |
| 49 | S&F for TMT bars of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.,bcomplete all as specified and as directed. |
| 50 | S&F for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.,bcomplete all as specified and as directed. |
| 51 | M&L for formwork to flat finished surface of concrete to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, chajja, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed. |
| 52 | M&L for reinforcement cement concrete (nominal mix) type B-1 ,1:2:4 (20 mm graded crushed stone aggregatge) for Chajjas/Balcony/Landing work/kitchen slab etc, complete all as specified and as directed. |
| 53 | S&F in repair curtain rod, 20 mm dia stainless steel fixed with brakets,stops,rollers etc, complete all as specified and as directed. |
| 54 | M&L for applying two coats of synthetic enamel paint over a coat of zinc chrome/red oxide primer including preparation of new or previously untreated steel surfaces over 10 cm in width or girth, complete all as specified and as directed. |
| 55 | M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying one coat (finishing coat) of synthetic enamel paint, complete all as specified and as directed. |
| 56 | S&F for 150 mm long Extruded aluminium alloy handle, cast type, anodised ISI marked, complete all as specified and as directed. |
| 57 | S&F for 150 mm long mild Steel handles, oval type complete all as specifed and as directed by Enginner-in-Charge |
| 58 | S&F for aluminium anodised barrel tower bolt ISI marked of extruded section and fixed, length of bolt 200mm, complete all as specified and directed by Engineer-In-Charge. |
| 59 | S&F for 150 mm long Mild Steel barrel tower bolts and fixed complete all as specified and as directed by Enginner-in-Charge |
| 60 | S&F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (ISI marked), complete all as specified and as directed. |
| 61 | S&F for 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specifed and as directed |
| 62 | S&F for mild steel spring stove enameled black for door 300mm, ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, complete all as specified and as directed. |
| 63 | S&F for floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue, nodised, with hard drawn steel spring, fixed in bottom body of door, complete all as specified and directed by Engineer-In-Charge. |
| 64 | M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in sub base, finished even and fair without using extra cement, complete all as specified and directed by Engineer-In-Charge. |
| 65 | M&L for machine pressed precast concrete interlocking paver block of any size and shape (Red and & Yellow coulour only) confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigment including 25mm thick sand cushioning, complete all as specified and directed by Engineer-In-Charge. |
| 66 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 (Design mix) grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and as directed . |
| 67 | M&L for plain cement concrete 1:3:6 type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling of pressed steel frame, complete all as specified and directed |
| 68 | S&F in repair for vitreous china urinal, half stall and grating and union for discharge pipe (excluding flushing cistern and flush pipe but including waste pipe), complete and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe fixing in repair, complete all as specified and as directed. |
| 69 | S&F vitreous china wash basin, white, flat back, size 550x400mm excludings taps, waste, chain and plug and porcelain stopper including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of PTMT (half or full threaded) and pedestal, fixing in repair, complete all as specified and as directed. |
| 70 | S&F for pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15mm bore pipe, fixed in repair, complete all as specified and as directed. |
| 71 | S&F in repair for vitreous China squatting pattern Orissa pattern WC size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) but excluding lime concrete bedding, complete all as specified and as directed. |
| 72 | S&F in repair for Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, flush pipe but excluding flushing cistern) and including plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making good to dismantled/ damaged floor in cement concrete M-15 (1:2:4), type B-1 (using 20mm graded crushed stone aggregates), complete all as specified and as directed . |
| 73 | S&F in repair for 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup waste washer, complete all as specified and directed by Engineer-In-Charge. |
| 74 | S&F in repair for PVC valveless symphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including brackets 10 ltr capacity, complete all as specified and directed by Engineer-In-Charge. |
| 75 | S&F in repair flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern, complete all as specified & as directed by Engineer-In-Charge. |
| 76 | S&F in repair for angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe, complete all as specified and as directed. |
| 77 | S&F in repair for PVC connection 15mm bore size with PTMT nuts of length 45cm length, complete all as specified and directed by Engineer-In-Charge. |
| 78 | S&F in repair for 110 mm PVC (SWR) floor/Nahani trap, plain with grating including jointing with solvent cement, complete all as specified and as directed. |
| 79 | S&F in repair for PVC (SWR) 'P' or 'S' trap of 110mm dia outlet, including jointing with solvent cement, complete all as specified and as directed. |
| 80 | S&F in repair for stainlees steel grating, chromium plated, size 125/150mm, with or without hole heavy duty, complete all as specified and as directed. |
| 81 | S&F in repair for 15 mm bore CP bib taps (long body), fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and, complete all as specified and as directed. |
| 82 | S&F in repair for bib taps chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed 15mm bore, complete all as specified and directed. |
| 83 | S&F in repair for chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and as directed. |
| 84 | S&F in repair for stainless steel soap dish, chromium plated, any type, fixed to plugs with screws, complete all as specified and as directed. |
| 85 | S&F in repair for stainless steel towel rail chromium plated 19mm dia 'D' type 60 cm long between flanges, ISI marked, complete all as specified and as directed. |
| 86 | S&F in repair for 15mm bore angle valve brass chromium plated screwed down, high pressure with crutch or butterfly handle concealed type with long shank cup, complete all as specified and as directed. |
| 87 | S&F in repair brass health faucet (ABS body) suitable for 15 mm dia pipe with 1.25 metre long flexible tube and (ABS) wall hook including making connections and fixed in position, complete all as specified and as directed. |
| 88 | S&F in repair rotational moulded polyethylene water storage tanks of 1000 litres capacity, (cylindrical vertical tanks with closed top) (White in colour and three layered) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc. including float valve 20/25mm, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 89 | S&F in repair rotational moulded polyethylene water storage tanks of 1000 litres capacity, (cylindrical vertical tanks with closed top) (White in colour and three layered) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc. including float valve 20/25mm, complete all as specified and as directed. Please Enable Macros to View BoQ information |
