|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : incl dewatering |
| 2 | Extra for every additional loft of 1.5 mtr or part thereof in all kind of soils |
| 3 | Providing and laying of Stone Soling hand packed tightly incl. ramming watering and filling of interstics incl all carriage complete job |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl all carriage complete job |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incl all carriage complete job |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 9 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, stair cases of required size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at levels Granite of any colour or shade (18mm Thick) |
| 10 | Providing edge moulding to 18 mm marble stone counters, Vanities etc.including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge (Granite Work) Double moulding |
| 11 | Providing and laying Double charged premium Quality vitrified floor tiles in different sizes KAJARIA, SOMANY (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to ISO 13006 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i. Size of tile 80 x 80cm |
| 12 | Brickwork with common burnt clay (non-modular) bricks of class designation 7.5 foundation and plinth including curing in cement mortor 1:6 (1cement: 6coarse sand) and extra for super structure above plinth level up to floor five level including all carriages up to site complete job. |
| 13 | 12mm Cement Plaster of Mix 1:6 ( 1 cement:6 Fine Sand) including all lifts,leads , Carriage of the material |
| 14 | Providing and applying white cement based putty of specified thickness , of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth , complete.(2mm thick )Complete job |
| 15 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0,253kg/sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes reparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry |
| 16 | Providing and fixing Ist quality Digital ceramic glazed wall tiles conforming to IS: 13753 of minimum thickness 5mm of approved make like KAJARIA, SOMANY or equivalent make in all colours, shades except begundy, bottle green, black of any shade as approved by Engineer in charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement sterry @ 3.3 Kgs-per/ sqm incl. pointing in white cement mixed with pigment of matching shade complete As per the specification/ selection by Engineer in Charge dado/skirting/ walls |
| 17 | Providing and laying Antiskid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (Icement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 300mm x 300m |
| 18 | Hardware Fixtures Providing and fixing Aluminium fixtures aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 250 x 16mm |
| 19 | Providing and fixing aluminium tower bolts ISI marked (anodised anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour of shade with necessary screws etc complete:150 x 10mm |
| 20 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.125mm |
| 21 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :Single rubber stopper |
| 22 | Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive and other allied fixing material to fix it properly on base complete job |
| 23 | P/F of multi-coloured vertical blinds on internal side of windows of approved quality and material incl. cost of channel, buds, thread, nails, brackets,labour and carriage upto site complete job (as directed by EIC) |
| 24 | Providing and fixing aluminium work for doors, window ventilators and partitions with extruded built up standard tubular sections/ appropriate Z. sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junction at top bottom and sides with required PVC/neoprene felt etc. aluminium sections shall be smooth rust free, straight , mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P brass / stainless steel screws, all complete as per architectural drawings and the directionsl of Engineer in Charge (glazing and panelling to be paid for sepatately) Polyester powder coated aluminium (minimum thickness of polyester powder coated 50 microns) For fixed portion Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns) |
| 25 | For shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns) |
| 26 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.Pre-laminated particle board with decorative lamination on both sides. |
| 27 | Providing and fixing of Aluminium composite panel, 2.5 mm thick including all fixtures complete job (Aluminium framework for same shall be paid seperately) |
| 28 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 29 | Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate imension, EPDM gasket,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).ENCRAFT, FENESTA, NCL VEKA, DECEUNINCK, ALUPLAST |
| 30 | Providing and fixing glazing in uPVC, window, ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc.(wherever required) complete as per the architectural drawings and the directions of engineerin-charge.With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 31 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 32 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (Two Coats) |
| 33 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 34 | Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work. wood work (hard and soft wood). |
| 35 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position including welding etc and applying a priming coat of approved steel primer all complete.). |
| 36 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc, including welding grinding, buffing, polishing and making curvature wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,j/c fixing the railing with recessary accessories and stainless steel dash fasterers, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such Kilogram as nuts, bolts, fasteners etc. including lifts, carriage of the material complete job |
| 37 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc, including welding grinding, buffing, polishing and making curvature wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,j/c fixing the railing with recessary accessories and stainless steel dash fasterers, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such Kilogram as nuts, bolts, fasteners etc. including lifts, carriage of the material complete job |
| 38 | Sanitary items Providing and fixing Floor mounted white vitrous china double trap syphonic WC with 10 litre cistern and all fittings & fixtures,seat cover etc with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid |
| 39 | Providing & fixing White vitreous china water closet squatting pan(Indiantype) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm |
| 40 | Providing and Fixing 2 Nos. support arms and backrest to mounted on the track (vertically and laterally) for handicap toilet complete as required. |
| 41 | Providing and fixing Set of Sanitary ware for Handicapped toilet comprising of European type W.C pan with cistern-1 No., Wash Basin with one pair mounting brackets-1 No. complete with fittings & seat cover, one no hinged rail 76 cm and two nos of grab rails 60 cm one faucet with spatula lever). |
| 42 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CPBrass single hole basin mixer of approved quality and make, includingpainting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 43 | Providing and Fixing in position Indian make (Ordinary) Lavatory Suites Conisting of Lavatory in VITREOUS CHINAWARE size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary; R.S or C.I BRACKETS for building into wall including Painting; 32 mm C.P BRASS WASTER WITH C.P brass chain and rubber plug; 15 mm C.P BRASS Elbow operated TAP. White Size 530 mm x 430 mm with Elbow operated trap.(For Lavatory.) |
| 44 | providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer-in-charg 40 mm dia |
| 45 | providing and fixing Cp brass 40 mm dia size bottle trap of approved quality & make and as per the direction of engineer-in-charg |
| 46 | Providing Sink mixer/wall Mixer (wall mounted) with 170mm long swivel spout connecting legs and wall flanges((CERA Cat. No. OCEAN F3002501 or approved equivalent). |
| 47 | Providing and fixing Braided Hoses with Two 15mm CP Brass Nuts & Rubber Washers Without Nipple (Suitable for Geysers and basins) of approved make: 45 cm length 15 mm nominal bore |
| 48 | Providing and Fixing Health Faucet 15mmdia with CP flush pipe, CP nozzel hook complete including CP flange etc. |
| 49 | Providing and fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 15 mm nominal bore |
| 50 | Providing and fixing PTMT soop dish holder having length of 138mm,breadth 102mm, height of 75mm 00 with concealed fitting arrangements, weighing not less than 106gms, |
| 51 | Providing and fixing horzontal/vertical Hot was geyser made of MS body with copper jacket inside with necessary inlet, outlet, drain, overflow, vent and all safety accessories etc, complete including cutting and making good the walls, wherever required, 25 litre |
| 52 | Providing and fixing 600x450 ram beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP. brass screws and washers complete |
| 53 | Providing and fixing CP. brass/ SS long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore (for wc Areas.) |
| 54 | Providing and fixing C.P. brass/ SS stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore(for drinking area) |
| 55 | Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works Make: Kingston Cat No. AGR ACS42/43 125 x 125 x 1mm |
| 56 | Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works Make: Kingston Cat No. AGR ACS42/43 75 x 75 x 1mm |
| 57 | Supply installation testing and commissioning water cooler having nominal cooling capacity of 40 litres per hours, with 40 litres storage tank with 2 nos. of faucets, one on goose neck type and other one fountain type both with separate mechanical lever control with 1.5 HP electric motor for compressor to work on one phase 230 volts 50 Hz AC power supply with complete assessories including cutting and making wall as required.(Assume for drinking points) |
| 58 | Supply installation testing and commissioning water purifier comprising 5 micron filter and UV sterliser on cold water supply in drinking water cooler to work on single phase 230 V 50Hz AC power supply with capacity 120lph (Aquaguard make)..(Assume for drinking points) |
| 59 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. |
| 60 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth. |
| 61 | Providing,Fixing,testing and commissioning of CP brass towel ring hook with concealed screws. |
| 62 | Providing,Fixing,testing and commissioning of CP brass twin coat hook with concealed screws. |
| 63 | Providing and fixing toilet paper holder :CP Brass |
| 64 | Providing and fixing uPVC class-B(IS:13592) trap of self cleaning design complete including cost of cutting and making good the cut-outs in walls and floors etc. complete (P or S trap). Make: Vectus/ Kissan/AKG100 mm inlet and 100 mm out let |
| 65 | Cutting holes in RCC beam/Slab by diamond cutting technique. (Nothing extra payable for electrical and water supply 102mm dia Hole in 125mm thick slabs |
| 66 | Providing and fixing 100mm dia nominal bore uPVC pipe (Class-III) inlet fitting approximately 400mm long above the trap with one or more 32/40/50/ 65mm dia holes for jointing waste pipes from waste appliances jointed and sealed with epoxy based sealant complete. Make:VECTUS/Kissan/AKG |
| 67 | Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W. B.Sink, floor drains etc. Make: Pipe:VECTUS/Kissan/AKG 40 mm outer dia |
| 68 | Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W. B.Sink, floor drains etc. Make: Pipe:VECTUS/Kissan/AKG 150 mm outer dia |
| 69 | Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be paid for supports. Make: Pipe & fittings: VECTUS/Kisan/AKG 110 mm outer dia |
| 70 | Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be paid for supports. Make: Pipe & fittings: VECTUS/Kisan/AKG 150 mm outer dia |
| 71 | Providing and fixing push fit floor clean plug of Upvc pipe.For 110 OD Pipe |
| 72 | Providing and fixing floor drain points formed out of 100 X 50mm dia reducing elbow embedded in floor,all completein all respect as directed. |
| 73 | Internal water supply Poviding and fixing 3 layer PP-R(Poly propylen Randem copolymer) pipes SDR 74 UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fittings i/c fixing the pipe with clamps Jat 1.00m spacing. This includes the cost of cutting chases and moking good the same including testing of joints complete as per direction of Engineer-incharge. (Make:Vectus, PRINCE) PN-16 Pipe, 20mm ODs |
| 74 | Poviding and fixing 3 layer PP-R(Poly propylen Randem copolymer) pipes SDR 74 UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fittings i/c fixing the pipe with clamps Jat 1.00m spacing. This includes the cost of cutting chases and moking good the same including testing of joints complete as per direction of Engineer-incharge. (Make:Vectus, PRINCE) PN-16 Pipe, 25mm Ods |
| 75 | Poviding and fixing 3 layer PP-R(Poly propylen Randem copolymer) pipes SDR 74 UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fittings i/c fixing the pipe with clamps Jat 1.00m spacing. This includes the cost of cutting chases and moking good the same including testing of joints complete as per direction of Engineer-incharge. (Make:Vectus, PRINCE) PN-16 Pipe, 50mm ODs |
| 76 | Providing and fixing 3 layer PP-R(Poly propylene Random copolymer) pipes SDR 7.4 UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (Make:Vectus, PRINCE) Concealed work including cutting and making good the walls etc. (Internal) PN-16 Pipe 15mm ODs |
| 77 | Providing and fixing 3 layer PP-R(Poly propylene Random copolymer) pipes SDR 7.4 UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (Make:Vectus, PRINCE) Concealed work including cutting and making good the walls etc. (Internal) PN-16 Pipe, 20mm ODs |
| 78 | Providing and fixing 3 layer PP-R(Poly propylene Random copolymer) pipes SDR 7.4 UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (Make:Vectus, PRINCE) Concealed work including cutting and making good the walls etc. (Internal) PN-16 Pipe, 25mm ODs |
| 79 | Providing and fixing 3 layer PP-R(Poly propylene Random copolymer) pipes SDR 7.4 UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (Make:Vectus, PRINCE) Concealed work including cutting and making good the walls etc. (Internal) PN-16 Pipe, 32mm ODs |
| 80 | Providing and fixing C.I. Butterfly valves conforming to PN 1.0/13095 with nuts, bolts, washers, 3mm thick insertion rubber gasket and two matching flanges as per table 'E' etc. complete.32 mm nominal bore |
| 81 | Providing and fixing C.I. Butterfly valves conforming to PN 1.0/13095 with nuts, bolts, washers, 3mm thick insertion rubber gasket and two matching flanges as per table 'E' etc. complete.65mm Nominal Bore |
| 82 | Providing and fixing gunmetal equilibrium float valve with S.S. Rod and 2mm thick copper float, tested for 5 Kg/Sq.cm. complete including companion flanges, nuts, bolts, washer etc. complete.Make: TIEMME/Leader/Sant/.32 mm Dia |
| 83 | Providing and placing on terrace (at all floor levels) 4 Layer polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (5000 +5000 ltrs.)Make: VECTUS/SINTEX |
| 84 | Providing and Fixing of Tanky Nipple G.I 25 |
| 85 | Providing and Fixing of Ball Value 25mm |
| 86 | Providing and Fixing of Union 25mm |
| 87 | Providing and Fixing of Elbow 25mm |
| 88 | Providing and Fixing of Tee 25mm |
| 89 | Providing and fixing of approved make float operated ball valve with Brass/copper heavy duty float confirming to IS 9762 & other associated accessories & works etc., complete. For 80mm dia pipe |
| 90 | External water supply Providing and fixing in trenches the following sizes of GI class `C' (heavy class) pipes conforming to IS:1239 with accessories like fittings including tees, elbows, reducers, flanges, rubber gaskets, GI nuts, bolts and washers including excavation in all kind of soil, refilling, ramming, shoring, removing the excavated surplus material, providing adequate support to the pipe and making good the same complete as required. Rate shall include for dewatering necessary to execute the work. The pipe shall not be less than 1.0 m below ground level at any point. Pipes shall embedded all round 150 mm thick compacted silver sand and protectionto GI pipes and fitting by applying pypkote primer @ 100 gm/sqm). Thereafter wrapping 4 mm thick pypkote (AW4mm) protection coating by thermo fusion process. Overlap shall be maintained at 20 mm. The application shall be strictly as per manufacturers’ specifications.25mm dia |
| 91 | Providing and fixing in trenches the following sizes of GI class `C' (heavy class) pipes conforming to IS:1239 with accessories like fittings including tees, elbows, reducers, flanges, rubber gaskets, GI nuts, bolts and washers including excavation in all kind of soil, refilling, ramming, shoring, removing the excavated surplus material, providing adequate support to the pipe and making good the same complete as required. Rate shall include for dewatering necessary to execute the work. The pipe shall not be less than 1.0 m below ground level at any point. Pipes shall embedded all round 150 mm thick compacted silver sand and protectionto GI pipes and fitting by applying pypkote primer @ 100 gm/sqm). Thereafter wrapping 4 mm thick pypkote (AW4mm) protection coating by thermo fusion process. Overlap shall be maintained at 20 mm. The application shall be strictly as per manufacturers’ specifications32mm dia (Riser) |
| 92 | Providing and fixing in trenches the following sizes of GI class `C' (heavy class) pipes conforming to IS:1239 with accessories like fittings including tees, elbows, reducers, flanges, rubber gaskets, GI nuts, bolts and washers including excavation in all kind of soil, refilling, ramming, shoring, removing the excavated surplus material, providing adequate support to the pipe and making good the same complete as required. Rate shall include for dewatering necessary to execute the work. The pipe shall not be less than 1.0 m below ground level at any point. Pipes shall embedded all round 150 mm thick compacted silver sand and protectionto GI pipes and fitting by applying pypkote primer @ 100 gm/sqm). Thereafter wrapping 4 mm thick pypkote (AW4mm) protection coating by thermo fusion process. Overlap shall be maintained at 20 mm. The application shall be strictly as per manufacturers’ specifications.40mm dia |
| 93 | Constructing masonry Chamber 60x60x75cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10graded stone aggregate 40mm nominal size) and inside plastering with cement mortat 1:3 ( 1cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design.With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 94 | External Severage system Exacavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms , depth upto 1.5 m including getting out the exacavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed within a lead of 50mtr.All kinds of soil Pipes, cables etc., exceeding 80 mm dia, but not exceeding 300 mm dia |
| 95 | Providing and fixing square-mouth S.W. gully trap grade 'A’ complete with C.I. grating F.P.S. bricks class designation 100 masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design including supply and laying of 100 mm dia nominal SW pipe class-A conforming to IS:651. including alround concrete over 100mm dia SW pipe complete in all respects.150 x 100 mm size P type. |
| 96 | Providing and constructing brick masonry rectangular type manholes with 100 class designation bricks in cement mortar 1:5 (1 cement : 5 coarse sand) inside and outside 12mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand)with a floating coat of neat cement on inside surfaces, 15 cm thick PCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size ) for fixing manhole frame; foundation concrete 1:4:8 mix (1cement : 4 coarse sand : 8 graded stone aggregate of 40 mm nominal size) including making channels and benching in cement concrete 1:2:4 mix (1 cement : s neatly finished complete as per standard design.(Nothing shall be payable for excavation, refilling and disposing off surplus earth as required by Engineer-in-charge) 450x450x450mm manholes with FRP manhole cover and frame (heavy-duty) perforated/unperforated 450x450 mm size conforming to the latest relevant IS specifications, of the brand as approved. |
| 97 | 600x600x600mm manholes with FRP manhole cover and frame (heavy-duty) perforated/unperforated 600x600 mm size conforming to the latest relevant IS specifications, of the brand as approved |
| 98 | Providing and fixing in position polyethylene septic tank type-B (Comfort or equivalent ) having capacity for 50 users, 47\\"x51\\"x119\\" inches in size, including excavation of put as per the size, providing and laying of 150mm thick bed concrete in 1:4:8 mix (1: cement:4 course Sand :8 graded stone agg 20mm nominal size) filling the septic tank with fresh water, connecting the inlet and outlet with the septic tank and filling the dry course of sand and bajre around the septic tank complete Job including carriage of all materials involved |
| 99 | Making soak pit 2.5m diameter3.5m deep Dry tone massonary incl RCC Sab 1 : 1.5 : 3 complete job |
| 100 | Providing and fixing Gunmetal gate valve with CI wheel of approved quality (screwed end).25 mm nominal bore |
| 101 | Providing and fixing Gunmetal gate valve with CI wheel of approved quality (screwed end).20 mm nominal bore |
| 102 | Providing and Fixing of horizontal centrifugal single /double stage pumping set with bronze impellers, connected to TEFC induction mortar suitable for 400/440 volts, 3 phase, 50 cycles ac supply as per the following details. Pumps shall be complete with motor control panel with incomer MCB, outgoing MCB for motors, sump pumps panel, ammeter, voltmeter, liquid level controller from OH tank to UG tank, control wiring, cabling, earthing wire all complete .Domestic water transfer pumps (a). Capacity: 100 lpm'b. Head : 35 mtr.c. Impeller : Bronzed. Shaft : SSe. RPM : 2900.f. Mover : Electric Motorg. Make: Kirloskar/KSB'h. HP - 3 hp or As required.i.Quantity : [1 working] |
| 103 | Providing and fixing cast iron butterfly valves conforming to IS, PN 1.0 complete with bolts, nuts, 3mm thick compressed asbestos gasket, and two matching flanges as per table E complete.(Make:Castle/SKS) 50 mm dia. |
| 104 | Providing and fixing cast iron butterfly valves conforming to IS, PN 1.0 complete with bolts, nuts, 3mm thick compressed asbestos gasket, and two matching flanges as per table E complete.(Make:Castle/SKS) 65 mm dia. |
| 105 | Miscellaneous Item Providing and fixing of Inaugration Stone made up of granite with engraved leeters including curtain rods and all necessary items including a pedestal if necessary as per directions of Engineer in charge Complete job |
| 106 | Providing and fixing of waterproof decorative tents (40ftx40ft) strictly to be approved by the engineer incharge including arrangements of furniture like sofa sets, VIP chairs, tables, etc, dry fruits(3 kg including bowls), mineral water(500ml-100No.), Kahawa with bread(100 No.), including any other minor requirements at site complete job |
| 107 | Supplying/Stacking good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment ) including laying, ramming of good earth in required thickness as per directions of engineer in charge complete job |
| 108 | Grassing with selection no 01 grass including watering and maintenance of the Lawn for 30 days and more , till the grass forms a thick lawn , free from weeds, and fit for moving including in rows 7.5 cm apart in either direction |
| 109 | Engagement of manual laboures for removing of dust and dirt and removing ant left over material from inside building and outside as well in order to make building ready to use as per directions of engineer in charge complete job Please Enable Macros to View BoQ information |
