|
| 1 | Supply of 185 sq. mm 3 core high conductivity aluminum strand compacted circular conductor XLPE armoured 11 KV cable neutral earthed system confirming to IS 7098-Part-II(1985) with latest amendment complete in all respects as per direction of E/I. Make: Gloster/Universal/Polycab/Havells. (AOR Page-15) |
| 2 | Supply and fixing of plain or pin type copper tin plated cable socket (lugs) to the cable leads making connections etc. complete in all respects as pe direction of E/I PS No. 504.a) 185 sq. mm |
| 3 | b)-16 sq. mm |
| 4 | c)- 70 sq. mm |
| 5 | d)- 400 sq. mm |
| 6 | Laying of One number XLPE Power cable of 11 KV grade of following size in the existing RCC/HUME/METAL/HDPE pipe as required (DSR elect 2018 Item No 8.3.2 /P-44) above 120 sqmm and upto 400 sqmm |
| 7 | Supply of steel tubuler pole 11 Mtr. Long designated at 410-SP 56 in 1:3:6 1 cement concrete foundation including excavation back filling etc. complete in all respects exacavation back filing etc. Complete in all respect as per direction of E/I. UPERC Pg. No. 30 |
| 8 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. DSR 2018/11.3.4a)Above 10.00 metre and upto 12.00 metre |
| 9 | b)Above(8.0 metre and upto 10.0 metre) DSR Electrical 2018/ I. No. 11.3.3 |
| 10 | Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted) DSR-11.5 |
| 11 | S/F of straight MS Channel 100x50x2240mm including all nuts and bolts etc. complete in all respects as per direction of E/I. UPERC P-39 |
| 12 | MS T-Off Channel |
| 13 | S/L of Al. armoured cable PVC insulated Ar. served & sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I.Complete in all respects . The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Make -Grandlay/Plaza/Kalinga/ Havells. (PS No. 501) UPSR -2018 |
| 14 | A) 400 Sq.mm. 3½ Core |
| 15 | b)- 16 sq. mm 4 core |
| 16 | c) 70 Sq.mm. 3½ Core |
| 17 | Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter,voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc.The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. |
| 18 | The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. Incoming 200 Amp. TPN-1 No Outgoing (a) 100 Amp. TNP-2 Nos. (i) Cat. A Cubicle Type each - - (ii) Cat. B. Cubicle Type PS No.802 |
| 19 | S/Laying of heavy density poly ethylene pipes ISI marked anti rediant grade OD 160mm dia PN-8 PE 100 grade as per IS code 4984 with excavation at a depth of 1.20 Mtr below ground level i/c the cost of cutting of pipes for making up to length and making joints complete all respects as per direction of E/I. |
| 20 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. DSR-18 (Elect.) Item No-14.16A)160 mm dia (OD-160 mm & ID-135 mm nominal)DSR-18 (Elect.) Item No-14.16.4 |
| 21 | b) 90 mm dia (OD-90 mm & ID-76 mm nominal) (14.16.2) |
| 22 | Analysis of Rates for laying of 120 mm dia DWC (Double Wall Corrugated) pipe across the road by Trenchless Method (Manual) |
| 23 | S/Making of Straight through joint suitable for185sq.mm x 3 core 11 KV armoured cable as per ISS & complete as per the direction and satisfaction of E/I |
| 24 | S/F of jointing of following sizes outdoor/indoor type 11 KV jointing kit …etc uperc Pg-29 |
| 25 | Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.(DSR-2018, 12.42) |
| 26 | Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & backfilling and Required T&P completee in all respect. PS NO. 641 (Make-Bajaj, Valmont,Transrail,GE) |
| 27 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP66 Protection complete in all respect.CAT-AAA PS. NO-1422 (Make-Bajaj, LT,Philips,Havells, Klite,Neri) |
| 28 | S/F of 2.5 sq.mm x 3 core cable as per (AOR Page-19) |
| 29 | Supply & erection of overhead line with ACSR conductor on poles / service bracket including binding etc. complete in all respects.. PS 627 |
| 30 | Barbed Wire UPERC P-39 |
| 31 | Danger board with ClampUPERC P-39 |
| 32 | Number plate UPERC P-39 |
| 33 | Dis/Re-fixing of 63/100 kva transformer with connection loading & unloading, cartage charge from site to repairing at worshop complete in all respects as per direction of E/I (AOR) |
| 34 | S/F of 11 KV TPMO Relco/Rama make 9 Nos. insulator of jai Shree/BHEL make complete in all respects as per direction of E/I. UPERC P-48 |
| 35 | S/F of out door type 11KV fuse set Relco/Rama/Rastriya make with insulator Jai shree/BHEL make complete in all respects as per direction of E/I..(AOR) |
| 36 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000 mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.. PS 725 (B) |
| 37 | S/F of 11 KV disc insulator 70 KN and fitting B and S heavy duty with clamp of cross arm fixed on HT Pole including all T/P . complete in all respects as per direction of E/I. UPERC P-39 Annexure-16 |
| 38 | S/F of 11 KV Pin insulator of including all T/P. complete in all respects as per direction of E/I. UPERC-2019 P-40 |
| 39 | Cement Concrete with 2 cm gauge stone grit, coarse sand & cement in proportion of 4:2:1 including supply of all material, Labour , tools & plants etc. Required for proper completion of work. SOR No. 279(a) |
| 40 | Demolishing R.C.C. Work Manually by mechnical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of E/I. (AOR) |
| 41 | Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. DSR Electrical - 2018 Item No. 12.38 |
| 42 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect... PS 716 |
| 43 | M.S. Strip (50X6mm) Fencing (6 feet Height including Civil Work)UPERC P-53 |
| 44 | Plinth of transformerUPERC P-53 |
| 45 | Cutting roads and making good the same including supply of extra quantites of materials i.e. moorum screening red bajri and labour required. I) Bituminious portion AOR Please Enable Macros to View BoQ information |
