|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 3 | 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stoneaggregate 40 mm nominal size) |
| 4 | Providing and fixing Ist quality ceramic/vitrified glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make of size 300x600, (colour and design as approved by Engineer-in-Charge), in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 5 | White vitreous china ware wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 6 | Providing and fixing white vitreous china water closet squatting pan(Indian type): |
| 7 | Orissa pattern W.C. pan of size 580x440 mm |
| 8 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 9 | Provinding and fixing of C.P. Brass Jet with brass nosel steel flange & PVC flexible pipe complete with all respect |
| 10 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete |
| 11 | Flexible pipe |
| 12 | 32 mm dia |
| 13 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 14 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 15 | 100 mm inlet and 75 mm outlet |
| 16 | Sand cast iron S&S as per IS - 3989 |
| 17 | Providing and fixing for laying, jointing, fixing and testing G.I. pipe lines and specials tees bends, sockets, elbows etc .inside building and testing etc. complete including cutting ,threading including cost of specials. i/c cutting and making good the walls etc. Internal work - Exposed on wall |
| 18 | 15 mm dia nominal bore |
| 19 | 20 mm dia nominal bore |
| 20 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 21 | 20 mm nominal bore |
| 22 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 23 | 30 cm length |
| 24 | 15 mm nominal bore |
| 25 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 26 | 15 mm nominal bore |
| 27 | 20 mm nominal bore |
| 28 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 29 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 |
| 30 | 15 mm nominal bore |
| 31 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 32 | 15 mm nominal bore |
| 33 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 34 | 15mm nominal bore |
| 35 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 36 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 37 | 15 mm nominal bore, 105 mm long, weighing not less than 138 gms |
| 38 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 39 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" i/d(Viking or equivalent with 114gram wt.) |
| 40 | Providing and fixing of tank nipple complete in all respect. |
| 41 | 20 mm |
| 42 | Providing and fixing PVC Pipe 4\\" (100mm Nominal bore) i.e. 6 Kg/ sq pressure complete in all respect |
| 43 | Providing and fixing PVC Pipe 3\\"(75mm Nominal bore) i.e. 6 Kg/ sq pressure complete in all respect |
| 44 | Providing and fixing of PVC seat cover for EWC complet in all respect |
| 45 | Conversion of OWC/Indian W.C to E.W.C P/s trap complete including dismentaling of indian OWC dismentaling of 4\\" & C.I. P Trap fixing of 4\\" C.I. bend PVC Collar drip seal joint and 4\\" PVC pipe 1'-6\\" average length 6kg /cm2 pressure repair of dismental floor fixing of surface W.C. all special pipe lead hampyarn, cement sand, Bajri, etc and inclucive of carrage and all taxes |
| 46 | Providing & fixing of C.P 1'-4\\" long 32mm bend as per approved make complete in all respect. |
| 47 | Providing and fixing of PVC handle for L/L Cistern complete in all respect as per entire satisfaction of EIC and make as approved by engineer encharge |
| 48 | Providing and fixing of PVC ball cock for L/L Cistern |
| 49 | Providing and fixing C.P waste complete in all respect |
| 50 | Providing and fixing of PVC cover for water storage tank cover duty ISI marked of approved make |
| 51 | i)500 to 1000 ltr . Cap. |
| 52 | Providing and fixing in postion of towal rail in with rawel plugs embedded in wall with C.P brass screws |
| 53 | Providing and fixing of C.P towel ring with brass screw make viking or equivalent |
| 54 | Providing and fixing in position best indian make soap dish fixed into wall with C.P brass screws and complete in all respect including curring and making good the wall etc. |
| 55 | Providing and fixing CP Brass Pillar taps of approved quality |
| 56 | Providing and fixing CP Brass Shower of approved quality |
| 57 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete |
| 58 | Providing and fixing CP Shower with arm complete in all respect |
| 59 | Providing and fixing of CP Short Bend complete in all respect |
| 60 | Providing & fixing IRC encloser jali of mesh size 40 mm x 40 mm of 10 gauge with frame work of MS angle 40x40x5 mm and MS flat 32x5 mm including painting with two coats of synthetic enamel paint over a coat of steel arrangeent all as specified. (Size of angle grid should not be more than 12 sft) with two coats of black paint as per site requirement as desired by EIC Please Enable Macros to View BoQ information |
