|
| 1 | M&L for Non skid ceramic coloured tiles of premium quality of Group BI (a) 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 2 | M&L for Vitrified ceramic coloured tiles of premium quality of Group BI (a) 7 to 8mm thick (Square or rectangular) polished, area of each tile not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured of cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 3 | M&L for Glazed ceramic coloured tiles of 1st quality of size 450x300x7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in same colour grout to match including rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 for receiving wall tiles and dismantling of existing tile complete all as directed. |
| 4 | S&F in repair single piece Vitreous china any shade cascade floor mounted single piece water closet P/S trap with dual flush for UF soft close slim seat cover, hinges fittings, conversion bend, fixing accesories complete all as specified and directed. Make : Jaquar Cat part No OPS-WHT15753NS250UFSMZ/Cera cat part No S1013105/Kajaria cat part No KB-3007 |
| 5 | S&F Vitreous china full set pedestal type wash basin, white, flat back, size 585x450x220mm including bracket, CP brass 32m dia coupling, waste pipe fixed in repair complete all as directed. Make : Jaquar Cat part No Jaguar FLS-WHT-5801 & 5301/Cera cat part No S2040112 & S2090107 or equivalent make : Kajaria/Kohler |
| 6 | S&F in repair PVC connection 15 mm size with brass nuts of length 450 mm complete all as specified and directed. |
| 7 | S&F in repair for bevelled edge looking mirror 5.50 mm thick of of any size, selected quality glass with design as apporoved by GE, frame less and fixed to chromium plated brass screws and studs complete all as specified and directed. |
| 8 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing length 60 cm long. |
| 9 | S&F in repair Corner glass shelf assembly with bracket complete all as specified and as directed. |
| 10 | S&F in repair toilet paper holder with flap guard fixed to walls with chromium plated brass screws. |
| 11 | S&F in repair soap dish holder fixed to walls with chromium plated brass screws. |
| 12 | S&F in repair soap dispenser fixed to walls with chromium plated brass screws. |
| 13 | S&F in repairs CP brass hot & cold single lever basin mixer with 450mm long braided hoses cast copper alloy with centre hole for WHB complete all as directed by Engineer-in-charge. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis series |
| 14 | S&F in repairs CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provn with connecting legs & flangs in complete all as specified. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis series |
| 15 | S&F in repairs 15mm bore long body bib tap chromium plated fancy type with wall flange and aerator fixed in repair complete all as specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis series |
| 16 | S&F in repairs CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis series |
| 17 | S&F in repair CP brass overhead shower square fancy type 100x100 mm with extension CP Arm pipes. |
| 18 | S&F in repair CP Health faucet telephonic type with 1.5m long flexible CP pipe. |
| 19 | S&F in repair brass chromium plated towel rail, 600mm long. |
| 20 | S&F in repair brass chromium plated towel ring fixed with screw in wall complete all as specified and directed. |
| 21 | S&F in repair brass chromium plated towel rack with hooks, 60cm long between flanges complete all as specified and directed. |
| 22 | S&F of tooth brush/paste tumbler holder fixed to walls with chromium plated brass screws. |
| 23 | S&F of Coat hook fixed to walls with chromium plated brass screws. |
| 24 | S&F PVC (SWR) 110mm dia pipes rating 6kg/cm2 single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed. |
| 25 | S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed. |
| 26 | S&F PVC bends of 75 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed. |
| 27 | S&F PVC bends of 110 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed. |
| 28 | S&F PVC (SWR) floor trap 100mm dia, plain including jointing with solvent cement fixed in repair complete all as specified and directed. |
| 29 | S&F in repair Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with or without hole for waste pipe complete all as specified and directed. |
| 30 | S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including cutting, chasing in, taking up or down existing steel tubing pipe complete all as directed. |
| 31 | S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed. |
| 32 | S&F 1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 15/20mm dia PTMT ball valve complete set and dismantling of existing unserviceable tank and removing from site complete all as specified and directed |
| 33 | M&L Drapery rod in any length, high strength stain less steel pipe having outer dia 25-28mm a pair of brackets & a pair of stainless steel finials, fixed in repair complete all as specified and directed. |
| 34 | S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based corrugated steel sheet 0.50 mm (Total coated thickness) thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc fixed in repairs including dismantling complete all as directed. |
| 35 | S&F Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.(Fe-410-W(Gde E- 250) quality B) |
| 36 | M&L for Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 37 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 38 | M&L for 15mm thick ready mix cement plaster on brick, concrete surfaces and wall/Ceiling surface finished even & fair, finishing curing scaffolding including taking down of existing cement plaster etc complete all as specified and directed. Make : ACC (Suraksha) /Ultratech(Readyplast)/Birla (Aerocom). |
| 39 | M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work complete all as specified and directed. |
| 40 | Demolition of cement concrete in ground floor and paving nexc 15cm thickness (below or above ground level) |
| 41 | M&L for 75mm thick PCC 1:3:6 type C-2 using 20 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc concrete complete all as specified and directed |
| 42 | M&L for 100mm thick PCC type B1 1:2:4 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement complete all as specified and directed. |
| 43 | Complete removing of existing treatment from wall / ceilling by using mechanical sander/grinder complete all as specified and directed. |
| 44 | M&L for applying 3mm thick damp proof wall care putty as per manufacturers instruction, Preparation of puttied wall / ceiling by mechanical sander/grinder and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed. |
| 45 | M&L for Preparation of surfaces of wall / ceiling and applying two coats of weather coat exterior paint over a coat of primer and over a coat of 3mm thick white cement base water proof putty including sanding/grinding complete all as specified and directed. |
| 46 | S&F Door seal bottom for insect prevention with Carbon metal seal strip with rubber insulation, Anti rust, weather proof, soundproof for all door type, brown colour fixed to door with carbon screws complete all as directed. |
| 47 | M&L in repair for 18/19mm thick both side prelaminated colour WPC board for cup board shutter and frame & fixed at site including a pair of Auto closing hinges 35 mm of 0 crank (KH-001) openable at 110 degree/Continuous (piano) hinges stainless steel, bright finish or electrogalvanised width of flap 30 mm, magnet catcher and stainless steel handles of 150 mm size complete all as specified and directed. |
| 48 | M&L for 18-20mm thick zed black Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) pointing in white cement (1:2) using marble dust and half rounding of exposed edges including taking down of existing shelf complete all as specified and directed. |
| 49 | M&L for PCC 1:2:4 Type B-1 {using 20mm graded crushed stone aggregate} as in coping/ benching including weathering, slightly rounded or chamfered angles and throating etc including necessary form work incl demolition of existing cement concrete of any description complete all as specified and directed. |
| 50 | M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains including Desludging/ cleaning of open drain of any depth by mechanically means and burring the sludge into the ground complete all as specified and directed. |
| 51 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 52 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 53 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 54 | S&F factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all specified in MES Schedule as per direction of Engineer-In-Charge. |
| 55 | M&L 35mm thick factory made solid WPC (Wood plastic composite) both side prelaminated gauged door shutter (single door piece to be used) consisting of density 650 kg/cum panelled with SS mosquito wire mesh and XTN aluminium mesh for additional strength and safety purpose in any number of division with brown wood grain texture, including stainless steel wire mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufacturer instruction complete all as specified and directed. |
| 56 | S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed. |
| 57 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed |
| 58 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed |
| 59 | M&L for aluminum alloy powder coated standard hollow section of approved make and sample approved by GE as mentioned below window frame (Bombay sliding) with two glazed shutter and one Nos wire gauged shutter sliding type, with aluminum sections as per Series-B (18mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 6mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type 2 Nos aluminium handle of size 75mm and locking system including aluminium grill of 5mm thick, average width of aperture 50mm and SS wire cloth 0.46mm dia of wire and 1.40 aperture and provision of openable space for AC with 04 Nos of tower bolt etc complete all as specified and directed. |
| 60 | S&F aluminium powder coated frame for fixed partition of section 47.62mm x 44.45x1.6 mm thick, shutter glazed with tinted glass (Modi Guard) 5mm thick/AC panel fixed with rubber gasket and aluminium strips as per standard method also rubber gasket at frame so as to make air tight all as per IS 737-1986 including aluminium grill of 5mm thick complete all as specified and directed. |
| 61 | M&L for welded steel wire fabric weight n exc 4kg/sqm fixed/welded to wood or steel members complete all as directed. (Weight per Sqm to be ascertained by a Board of Officer). |
| 62 | S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed |
| 63 | S&F Butt hinges, 100 mm long, extruded stainless steel with galvanised mild steel hinge pin anodised and fixed complete all specified as directed |
| 64 | S&F 300mm long stainless steel, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed |
| 65 | S&F 150mm extruded stainless steel handles, fabricated type, complete all as specified and directed. |
| 66 | S&F 200mm long stainless steel, barrel tower bolts of extruded section complete all as specified and directed |
| 67 | M&L for PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in foundation of man hole incl demolition of existing cement concrete of any description complete all as specified and directed. |
| 68 | M&L for Cleaning the manhole up to 1.50m deep by rodding manually and removing the sludge from manhole and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and covered with the enough quantity of lime to stop the foul smell complete all as specified and directed. |
| 69 | M&L for Cleaning the sewage line up to 150mm dia by rodding manually and removing the sludge and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and covered with the enough quantity of lime to stop the foul smell complete all as specified and directed. |
| 70 | S&F multi purpose wall mounted Cabinet Mirror ABS body of size 450x600 mm for bathroom fixed with screw on wall complete all as directed.Sample to be approved by GE. |
| 71 | S&F in repair Factory made heavy duty precast RCC Manhole cover confirming to IS 12592 (Part -1 & II) of size 1200mm x 450 mm x 75mm of M-30 Grade of concrete and suitably reinforced with strong vibrating compaction by vibratory table including providing MS hook duly black painted, complete all as specified and directed. |
| 72 | M&L for 300x300x25mm heavy duty Chequered cement concrete tile made with rubber moulds of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. |
| 73 | M&L for Rubberised precast prepolished coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. |
| 74 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base filling and mass concrete complete finished even and fair incl demolition of PCC all as specified and directed. |
| 75 | M&L for fibre reinforced liquid applied elastomeric waterproofing membrane PU-Acrylic Hybrid Polymer on door/window chajjas, Roof, wall etc by scrapping of damaged portion and preparing the surfaces by 15 mm thick rendering in CM 1:3 and finished even and smooth using extra cement over concrete surfaces and benching including weathering slightely rounded or chamfered angles and applying a coat of PU (01 ltr/sqm appyling area) over a coat of priming coat of the same component all as directed by Engr-in-charge (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). |
| 76 | M&L for preparation of cement concrete ground surface by brooming, washing and scrubing with wire brush to remove algae, fungus and moss growth then apply a 02 coats of acrylic waterproof floor paint for outdoor application acrylic waterproof floor paint as per manufacturers instructions to obtain glossy finish etc all as directed by Engr-in-charge. Make: Indigo paints, Asian Paints, Berger paints |
| 77 | M&L for obliterating old writing of any description, n exc 01 sqm with black paint in the form of diamond shape of size not exc 30x30cm and writing letters or figures (Block, Roman Italic or Indian), stops, commas, short lines, dashes, hyphens, brackets etc minimum of 10 cm height (total letters not exc 06 Nos) colour as decided by Engr -in charge complete all as specified and directed. |
| 78 | E/MTaking down water Heater of any capacity and make serviceable by replacing unsv part including descaling the inner container with cleaning solution including preparation of old painted surface body of geyser of any capacity, cleaning foreign material, filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody and refixing at site after compltion of wiring work |
| 79 | Taking down existing ceiling fan of any capacity and make serviceable by replacing unsv parts and preparation of old painted surface body and blades of ceiling fan of any capacity, cleaning foreign material, filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody and refixing at site after compltion of bldg work. |
| 80 | Taking down old unsv T/L of any size and capacity all as directed |
| 81 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed. |
| 82 | S&F in repair white modular cover plate with frame of following module complete including taking down old unsv modular cover plate with frame all as directed. |
| 83 | 3 Module |
| 84 | 6 Module |
| 85 | 8 Module |
| 86 | S & F in repair modular metal flush of following module complete taking down old unsv modular metal flush box with frame all as directed. |
| 87 | 3 Module |
| 88 | 6 Module |
| 89 | 8 Module |
| 90 | Supply and fix modular switch 1 way 6A, 1 Module |
| 91 | Supply and fix modular switch 1 way 16A, 1 Module with indicator lamp |
| 92 | Supply and fix modular bell push 6A, 1 Module |
| 93 | Supply and fix modular socket 6A, 2/3 pin combined 2 Module |
| 94 | Supply and fix modular socket 6A/16A, 2/3 pin combined 2 Module |
| 95 | Supply and fix modular fan regulators step type 2 module 120W |
| 96 | Material and labour for ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed. |
| 97 | Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 98 | Supply and fix in repair LED Up Down twin glow 20W + 20W light fitting of lumens 2000 lumens wall mounted, high pressure die cast alluminium, fully diffused, polycarbonated diffuser, system efficacy 100L/W complete all as specified and directed. |
| 99 | S&F LED tubelight batten fitting 10/12 Watt made of aluminium housing suitable for fixing on walls/ceoling including connections, warm/ natural/ cool white as per requirement at site complete all as specified and directed by Engr-In-Charge. Make: Trim Linea Neu of Crompton/ SmartBright of Philips/ ENDURA LINEAR NEO of Havells. |
| 100 | Supply and fitting LED street light fitting 35 Watt 230 V AC outdor type with high presure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with iimpact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete |
| 101 | Supply and fix in repair Exhaust fan 250 mm sweep, 1200 RPM, made up of Sturdy Engineering Plastic complete voltage 230 Volts 50 Hz, energy saving model single phase copper wound motor, white in colour complete with blade, box type louvers etc including taking down old unsv exhaust fan complete all as specified and directed. |
| 102 | S & F REO modular AC MCB box protected socket PVC Plastic base three- Module including 25 Amps Plug top and MCB 25 Amps Fixed in repair complete all as specified and directed |
| 103 | Supply and fix ceiling Fan complete with blades,down rods ,230 volts ,1200 mm sweep ,min air delivery 210 CFM with service value 6.00 BEE ,with Brushless direct current motor (BLDC) including taking down old unsv serviceable fan and deposited to the store. Please Enable Macros to View BoQ information |
| 104 | Supply and fix ceiling Fan complete with blades,down rods ,230 volts ,1200 mm sweep ,min air delivery 210 CFM with service value 6.00 BEE ,with Brushless direct current motor (BLDC) including taking down old unsv serviceable fan and deposited to the store. Please Enable Macros to View BoQ information |
