|
| 1 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | S&F Plain, solid straight chowkats,and frames, made of 2nd class soft wood, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints supplied and fixed , complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | S&F 30mm thick Flush shutters, solid core construction, with blockboard core and plywood face panels, commercial type on both sides one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed by Engr-in-Charge |
| 4 | S&F aluminium (Die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-In-Charge. |
| 5 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, 250 mm long, complete all as specified and directed by the Engineer-in-Charge. |
| 6 | S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-In-Charge. |
| 7 | M&L for 25mm x 3mm FI holdfasts complete all as specified and as directed by Engr-in-Charge. |
| 8 | S&F stainless steel butt hinges medium weight SS of size 100 mm by welding/screwing to existing frame including taking down old hinges all as specified and as directed. |
| 9 | S&F 150 mm size of handle extruded aluminium alloy handle fabricated type anodised complete all as specified and as directed by Engr-In-Charge. |
| 10 | S&F aluminium anodized, 150mm length of bolt barrel tower bolts of extruded section, complete all as specified and as directed by Engr-In-Charge. |
| 11 | M&L for Preparation of new or previously untreated wood or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified as directed by the Engineer-in-Charge. |
| 12 | S&F floor door stoppers of aluminium alloy body and toungue anodized with hard drawn steel spring overall length 140mm complete all as specified and as directed by Engr-in-Charge. |
| 13 | M&L for Floor door stopper 150mm long, of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed by Engr-in-Charge. |
| 14 | S&F in repair aluminium powder coated partition of specified aluminium section as per required size & wt. of section can not be less than 0.55 Kg/m including aluminium beads rubber gasket and 5 mm thick frosted glass in upper portion and 4 mm thick ACP sheet of any colour complete all as specified and directed by Engr-in-Charge. Note:- The rate quoted by contractor in inclusive for supply & fixing of 5mm frosted glass and 4mm thick ACP sheet in each shutter. |
| 15 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engr-In-Charge. Note :- Item considered for window cills & jambs hence and rate is inclusive of backing coat plaster, screed bed and taking down plaster. |
| 16 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | M&L for 15mm thick 2nd class soft wood as in boarding & fixed with nails in any situation (except flooring and skirting), planed one side with butt joints fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work complete all as specified and as directed by Engr-In-Charge. |
| 18 | S&F in repairs Gl push and pull channel brand of size 20\\"(51cm) length for modular cabinets, complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished, complete all as specified and as directed by Engr-In-Charge. |
| 20 | S&F Magnetic catches for cupboard doors No.2, complete all as specified and as directed by Engr-In-Charge. |
| 21 | M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and as directed by Engr-In-Charge. |
| 22 | M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge. |
| 23 | M&L for Preparing new plastered surfaces of wall, priming plastered and other surfaces with alkali resistant priming paint, and applying two coat of oil emulsion distemper complete all as specified and as directed by Engr-In-Charge. |
| 24 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhang etc,, also splays between floors and beams, etc. complete all as specified and directed by Eng-in-Charge. |
| 25 | M&L for cement concrete (Nominal mix) 1:2:4 type B1 (20mm graded stone aggregate) as in slabs supported on walls, beams.and.columns in floors, roofs, landings, balconies, canopies, déck slabs and in shelves and the like, complete all as specified and directed by Eng-in-Charge. |
| 26 | S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 27 | M&L. Anodised aluminium snap grid frame work of size of grid 605mm x 605mm for false ceiling, complete all as specified and as directed by Engr-In-Charge. |
| 28 | S&F 5mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing.complete all as specified and as directed by Engr-In-Charge. |
| 29 | S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed by Engr-In-Charge. |
| 30 | M&L Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade casing caping 25 mm width with modular metal sunken box with face plate inner & outer for modular switch complete with brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified and as directed by Engr-In-Charge. Note : (1) Making good to match with the adjoining surface shall be included in the unit rate.(2) Rate is inclusive of Cutting/chases of wall/floor/ceiling |
| 31 | -ditto- all as per item No 30 herein above but with 4 Sq mm and 2.5 Sq mm earth wire complete all as specified and as directed by Engr-In-Charge. |
| 32 | S&F Modular switch 1 way 10A, 1 module complete all as specified and directed |
| 33 | S&F Single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts complete all as specified. |
| 34 | Supply and Fix of MCB SP upto 32 Amps 240 Volts complete all as specified and directed. |
| 35 | Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quility of capacity 1.5 TR, copper wound unit , 230 Volt 50 Hz ,with minimum 3 Star rating complete as per specified and directed. |
| 36 | M&L for sub main wiring with three single core 10 Sqmm FR PVC insulated with one run of Nutral Black Colour and sheathed 1100 Volts grade, standed copper conductor ISI marked drawn into fixed in an including Casing -N-Caping/conduit with all fitting and accessories and one continuous run of 6.0 Sqmm copper conductor PVC insulated (green colour) as earth wire complete all as specified and directed. Note :-Five single core cables along with earth wire and Nutral and Casing -N-Caping shall be measured as one unit length complete all as specified and as directed by Engr-In-Charge. |
| 37 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including connection from ceiling rose complete all as specified and as directed by Engr-In-Charge. Please Enable Macros to View BoQ information |
