|
| 1 | Taking down shutter and removing from site of any description size but exc 1 sqm and n.exc 2 sqm complete all as specified and directed. |
| 2 | Taking down chowkhats or frame without taking of shutter and removing from site exc 1.5sqm but not exceeding 4 sqm each complete all as specified and directed. |
| 3 | Taking down chowkhats or frame (w/o taking off shutters) and removing from site n.exc 1.5sqm each complete all as specified and directed. |
| 4 | Taking down shutters of any description exc 1.00 sqm & nexc 2sqm each. and refixing in the same opening complete all as specified and directed. |
| 5 | Material and labour PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in hold fast block, roof kerbs or mud stop, coping, rounded or chamfered on edges and like including weathering, slightly rounded or chamfered angles and throating etc incuding necessary form work complete all as specified and directed. |
| 6 | Material and Labour for brick work with sub Class 'B' old size bricks, straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:6 including demolation of brick complete all as specified and directed. |
| 7 | Material and labour for 15mm thick cement plaster in cement mortar (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. including takining down cement plaster complete all as specified and directed. |
| 8 | Material and Labour for preparation of new plastered surfaces and applying two coats of oil bound distemper on walls complete all as specified and directed. |
| 9 | Supply and Fixing solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed. |
| 10 | Supply and Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing complete all as specified and directed. |
| 11 | Material and Labour in repair Box type steel window made of ERW tube P- section of size 60 mm x 25 mm single rebated, comprises glazed skelton shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1019/08 & Sh 1/3 to 3/3 dt 01 May 2008 complete including cutting holes, making good dismentled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window. (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf. (c) MS tower bolt 150mm long - 02 Nos/leaf. (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf. (e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf. (f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf complete all as specified and directed. Note :- MS guard bars, sheet glass wire mesh and painting shall be measured and paid sperately |
| 12 | Supply and Fixing in repairs mild steel box type ventilator fixed type with glazing bar with mesh & glass as per drg No. CEJZ/TD-06/07 dt 07.06.07 primer coated complete all as specified and directed. |
| 13 | Supply and fixing factory made 30 mm thick flush shutter, soild core construction with block board core and plywood face panels commercial type on both side complete all as specified and directed. |
| 14 | Supply and Fixing factory made 35 mm thick 2nd class hard wood glazed and skeleton shutter’s open rebated prepare to receive glass gauge etc edges of framing plain chamfered or rounded fitted with Cut and mitered bead’s for securing glass gauge etc size of mamber of shutters as per SSR Part-I Section-8 clause 8.2 (a) complete all as specified and directed. |
| 15 | Hacking out old broken glass any thickness, size, quality or description from steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 16 | Supply and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed on steel frame, in squares not exc 0.50 Sqm in each panes complete all as specified and directed. |
| 17 | Supply and fixing stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed. |
| 18 | All as per Srl item No 17 here-in-before but fixed in repairs |
| 19 | Supply and fixing 300 mm size, aluminium alloy,anodized sliding door bolt, clip type, and fixing clips of sheets or extruded section and fixing of bolts and sliding bolts of extruded section fixed with stainless steel screw complete all as specified and directed. |
| 20 | Supply and fixing butt hinges 100mm size medium weight cold rolled mild steel fixed with stainless steel screw complete all as specified and directed |
| 21 | Supply and fixing 150 mm size aluminium anodized barrel tower bolt of extruded section fixed with stainless steel screw complete all as specified and directed. |
| 22 | Supply and fixing 200 mm size extruded aluminium anodized tower bolt of extruded section complete all as specified and directed. |
| 23 | Supply and fixing in repairs 300mm mild steel ordinary rat tail rod pattern spring including roller plate including fixing with nailsd/ bolts or welded complete all as specified and directed. |
| 24 | Supply and fixing 150 mm size extruded aluminium anodized handle cast type fixed with stainless steel screw complete all as specified and directed. |
| 25 | Supply and Fixing in reapair 25mm dia stainless steel Curtain rods/ rails, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod complete all as specified and directed. |
| 26 | Material & Labour for Preparation of new wooden surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 27 | Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer on steel surfaces exceeding 10 cm width or girth including preparation of new surfaces complete all as specified and directed. |
| 28 | Supply and Fixing floor door stopper 125mm length Coated brown aluminium alloy body fixed Complete all as specified and directed. |
| 29 | Supply and fixing in repair 40mm long box type stainless steel hinges spring action complete all as specified and directed. |
| 30 | Supply and fixing in repair stainless steel rolling drawer pull type suitable for kitchen cabinets with all fixing arrangement area of each drawer n exc 0.30 sqm of vertical face having depth 450mm to 600mm complete all as specified and directed. Note:- Net area of front finished surface will be measured. |
| 31 | Supply and Fixing in repair mild steel continuous piano hinges with 30mm width of flap bright finished complete all as specified and directed. Please Enable Macros to View BoQ information |
| 32 | Supply and Fixing in repair mild steel continuous piano hinges with 30mm width of flap bright finished complete all as specified and directed. Please Enable Macros to View BoQ information |
