|
| 1 | Demolishing of cement concrete manually & disposal of material within 50 metres.Nominal concrete 1:3:6 or richer mix |
| 2 | Demolishing of RCC work manually including stacking of steel bars & disposal of material within 50 metres. |
| 3 | Demolishing of Brick work manually including stacking of servicible & disposal of material within 50 metres. in cement mortar |
| 4 | Dismantling of Doors & Windows Frames & Chawkhats Of area blow 3 SQM. |
| 5 | Dismantiling of tile flooring & roof laid in cement mortar including stacking within 50 meters for thickness above 25mm to 40mm |
| 6 | Earth work in excavation by mechanical means by hydraulicExcavator )/ manual means in foundation trenches or drains upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 Ratio |
| 8 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: |
| 9 | Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. |
| 10 | Providing and laying in position specified grade of reinforceed cement cocrete excluding the cost of centering, shuttring, finishing and reinforcment - All work upto plinth level. 1:1.5:3 |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 12 | Foundations, footings, bases of columns, etc. for mass concrete |
| 13 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level- |
| 15 | Steel work in built up tubular trusses including cutting and welding and applying primer coat of approved steel primer ad bolted with special shaped washers. Etc. |
| 16 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in 1:6 |
| 18 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 19 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 20 | Using R4 series with frame (115 mm & above) x (45 mm & above) & both glazed and fly screen sash (44 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multipoint locking system. (Height above 1.8m) |
| 21 | Using R2 series with frame (39 mm & above ) x (39 mm & above) & mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre) |
| 22 | Casement Window with Double Rebate Frame with two Side Hung Glazed Panel and two Side Hung wire mesh Panel and Fixed Mullion with friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles on both glazed and fly screen panel. |
| 23 | Using R4 series with frame (64 mm & above) x (55 mm & above) & sash (64 mm & above) x (100 mm & above) & French (False) mullion (64 mm & above) x (60 mm & above). (Height upto 2.5 metre). |
| 24 | Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. |
| 25 | With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles |
| 26 | With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles |
| 27 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked |
| 28 | 12 mm thick plain grade -1, medium density flat pressed three layer particle board with BWP type synthetic resin adhesive as per IS : 848 : |
| 29 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length |
| 30 | 12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) |
| 31 | Decorative plywood one side decorative veneer and commercial veneer on other face |
| 32 | Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws |
| 33 | Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : |
| 34 | Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. |
| 35 | Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the ‘W’ profile |
| 36 | Granite stone slab of all colour and texture except black, Cherry/Ruby red Area of slab over 0.50 sqm |
| 37 | Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to laid on 20mm thick cement mortar 1:4 cement and matching pigments etc., complete. 600x600 |
| 38 | 1000x1000 |
| 39 | Providing and laying Vitrified tiles in different sizes with water absorption less than 0.08 % and conforming to in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 jointing with grey cement slurry. |
| 40 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 41 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1 :3 and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 42 | Providing and laying of 60mm thk factory made cement concrete interlocking paver blocks M-30 made of block material with strong vibrator compaction of aproved design & shape in required colour filling the line with sand etc. |
| 43 | 12 mm cement plaster of mix : |
| 44 | 20 mm cement plaster of mix : |
| 45 | Providing & applying white cement based putty of 2 mm thick of approved brand over plastered wall surface for even & smooth wall fiinsh |
| 46 | Finishing with Epoxy paint two coats on all location prepared and applied on steel |
| 47 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete |
| 48 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour |
| 49 | Finishing with Delux Multi surface paint for interiors using primer as specified |
| 50 | Applying primer coat |
| 51 | Varnishing with varnish of approved brand and manufacture : |
| 52 | French spirit polishing |
| 53 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : |
| 54 | Providing and fixing machine cut, mirror/ eggshell polished including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. |
| 55 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen on overlapping of sheets complete excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 56 | Ridges plain (500 - 600mm) |
| 57 | Barge board (Upto 300 mm) |
| 58 | Gutter .(600 mm over all girth) |
| 59 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming . |
| 60 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 61 | Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside 100mm |
| 62 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 |
| 63 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes 75 mm dia pipe |
| 64 | 100 mm dia pipe |
| 65 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc.: For 100 mm dia pipe |
| 66 | For 75 mm dia pipe |
| 67 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75mm bend |
| 68 | Providing and fixing plain bend of required degree. 100mm |
| 69 | Providing and fixing single unequal plain junction of required degree |
| 70 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 71 | 100 mm inlet and 75 mm outlet |
| 72 | Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms |
| 73 | Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms |
| 74 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 75 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 76 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 77 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply 15mm dia |
| 78 | 20 mm nominal outer dia Pipes |
| 79 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc 15 mm dia nominal bore |
| 80 | 20 mm dia nominal bore |
| 81 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :150 mm |
| 82 | 200 mm diameter |
| 83 | Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150mm Dia |
| 84 | 250 mm. dia. RCC Pipes |
| 85 | Constructing brick masonary road gully chamber 50 x 45 x 60cm with F.P.S. brick in cement mortar 1 : 4 (1 cement : 4 coarse sand) including 500 x 450 mm pre cast RCC horizontal grating with frame complete as per standard design. |
| 86 | Making connection of sewer/drain line with existing manhole including breaking into & making good the wall, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1 : 3 (1cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete |
| 87 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall / ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm dia |
| 88 | 65 mm dia |
| 89 | 80 mm dia |
| 90 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze / gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 80 mm dia |
| 91 | 65mm dia |
| 92 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze / gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 80 mm dia Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 40 m |
| 93 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal |
| 94 | Wall mounted water closet LYS-WHT-38851P180UFSM |
| 95 | Vitreous china lipped front urinal Jaguar Urinal, Sensor one URS-WHT-13255 |
| 96 | Jaguar Counter Top Basin with Fixing Accessories, mm FLS-WHT-5931 |
| 97 | Jaquar Toilet paper Holder Recessed Type (Stainless Steel) CPA-CHR-1153 |
| 98 | Mirror,of CERA-Cat No. B3530105 |
| 99 | soap dish dispencer,of Jaguar CPA-CHR-1135 |
| 100 | Single Lever Extended Basin Mixer of jaguar FUS-CHR-29023B |
| 101 | stop cock (concealed) of FLR-CHR-5053N |
| 102 | long nose bib cock of ARI-CHR-39041 |
| 103 | Providing and fixing Jaguar, angle valve for basin mixer and geyser points of OPP-CHR-15053PM conforming to |
| 104 | Supply & erection of ISI marked portable fire extinguishers, confirming to IS:15683, wall mounted type, wall brackets complete in all respect as per standard item with all accessories, delivery hose & nozzle whereever required, including fixing on walls as per the directions of Engineer-in-charge. (MAKE : Minimax / Cease Fire / Safex / Safeguard / UFS) ABC dry powder Type 6 kg. capacity |
| 105 | CO2 gas type. 4.5 kg. capacity |
| 106 | Providing & fixing of hand lever operated forged brass / cast steel body full way ball valve type isolating valve (PN 16) having SS 316 ball, SS stem, gland, spring, steel handle with PVC grip, PTEF seat, screwed ends complete. (Make : CIM / Audco / Festo / Advance / AIP) 25 mm nominal bore |
| 107 | Providing & fixing air release valve with forged brass body full way ball valve type isolating valve, flanges / union, suitable for sprinkler / wet riser / down comer system with all necessary connections complete in all respects. (Make : Newage / CIM / Leader / Sant) 40 mm dia air release valve |
| 108 | Providing and fixing standard fire hose cabinet (750 mm x 1800 mm x300 mm) indoor type suitable for accomodating internal hydrant, hose reel made of not less than 16 SWG MS sheet having full fronted glass hinged door (5 mm thick glass) including necessary locking arrangement with handle for housing two nos. 15 meter long fire hose pipes, 30 meter long hose reel, branch pipe and hydrant valve as required as per drawings, including brackets for mounting accessories, painting (one coat primer and two coat of fire red colour). The cabinet shall be mounted on suitable raised platform. The words \\"FIRE HOSE\\" to be painted on the box. Please Enable Macros to View BoQ information |
