Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | PART A - Day to Day maintenance of Non-Residential buildings (Corporate office ,Annex Building, ERP Building, UICC building & substation.) (for Two Years)\\"(WITH ITC AVAILABILITY) |
| 2 | Plumbing:Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 3 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm Bend |
| 4 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) :110 mm Shoe |
| 5 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm |
| 6 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm |
| 7 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 8 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400 mm |
| 9 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 10 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 11 | Providing Health Faucet with CP Tube & Hook set as on when required and as per instruction of EIC. |
| 12 | Providing CP brass Bib cock two in one quater turn as on when required and as per instcruction of EIC |
| 13 | Providing C.P. Brass angle valve 15 mm as on when required and as per instrcution of EIC |
| 14 | Providing Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore as non when required and as per instrcution of EIC |
| 15 | Providing teflon tape as on when required as per instrcution of EIC |
| 16 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 17 | Providing C.P. towel rod size 600x20mm with C.P. brass screws to be approved by Engineer-in-Charge (PLAZA brand or equivalent) as per instruction of Engineer-in-charge. |
| 18 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gm |
| 19 | Providing C.P. soap dish (Balaji brand or equivalent) as per instruction of Engineer-in-charge. |
| 20 | Providing 125 mm grating withwaste hole as on when required as per instrcution of EIC |
| 21 | Providing 15 mm CP brass pillar tap of approved quality by (PLAZA brand or equivalent) as per instruction of Engineer-in-charge. |
| 22 | Providing of fixing( FLR-CHR-5001 B) Single lever Basin mixture Q turn of Jaquar make or approved equivalent quality etc complete as per instruction of EIC. |
| 23 | Providing White plastic seat (solid)with lid C.P.brass hinges and rubber bufers as on when required as per instcrution of EIC |
| 24 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 25 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board: 510x1040 mm bowl depth 250 mm |
| 26 | Providing Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings as on when required as per instcrution of EIC |
| 27 | Providing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms15 mm nominal bore as on when required and as per instcrution of EIC |
| 28 | Providing C.P. Brass bibcock 15 mm as on when required as per instcruion of EIC |
| 29 | Providing C.P. Brass stop cock (concealed) 15 mm as on when required as per instrcution of EIC |
| 30 | Providing 15 mm PTMT bib cock approved make in a phased manner of approved make as per direction of EIC. |
| 31 | Providing C.P. brass waste for sink or wash basin : 32 mm as per instruction of Engineer-in-Charge. |
| 32 | Providing Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings as on when required as per instcrution of EIC |
| 33 | Providing RACK BOLT using wash basin of approved make as per direction of EIC |
| 34 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm or 340 x 410 x265 mm sizes respectively. |
| 35 | Providing CP angle push cock in a phased manner of approved make as per direction of EIC. |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall: 25 mm nominal outer dia Pipes |
| 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall: 32 mm nominal outer dia Pipes |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall: 40 mm nominal outer dia Pipes |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall: 50 mm nominal outer dia Pipes |
| 40 | Providing PVC VALVE 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 41 | Providing PVC VALVE 32mm dia of approved quality as per instruction of Engineer-in-charge |
| 42 | Providing PVC VALVE 40mm dia of approved quality as per instruction of Engineer-in-charge |
| 43 | Providing PVC VALVE 50mm dia of approved quality as per instruction of Engineer-in-charge |
| 44 | Providing CPVC UNION - 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 45 | Providing CPVC UNION - 32mm dia of approved quality as per instruction of Engineer-in-charge |
| 46 | Providing CPVC UNION - 40mm dia of approved quality as per instruction of Engineer-in-charge |
| 47 | Providing CPVC UNION - 50mm dia of approved quality as per instruction of Engineer-in-charge |
| 48 | Providing and fixing on wall face PVC SWR pipes conforming to IS :13592 , including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes. (In case SWRpipes is laid on ground, cost of trenching & filling, if required is to be paidseparately)110 mm diameter (Type B) |
| 49 | Providing and fixing on wall face PVC SWR pipes conforming to IS : 13592 , including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (In case SWR pipes is laid on ground, cost of trenching & filling, if required is to be paid separately) 160 mm diameter (Type B |
| 50 | Providing BRASS TEE - 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 51 | Providing CPVC FTA brass of approved make as per direction of EIC 25mm dai |
| 52 | Providing CPVC FTA brass of approved make as per direction of EIC 40 mm dai |
| 53 | Providing CPVC Male threaded tee brass of approved make as per direction of EIC 25mm dai |
| 54 | Providing CPVC Male threaded tee brass of approved make as per direction of EIC 40 mmdai |
| 55 | Providing CPVC Male threaded tee brass of approved make as per direction of EIC 50mm dai |
| 56 | Providing of Nylone rope 12mm dia |
| 57 | Providing GI SOCKET 20MM dia of approved quality as per instruction of Engineer-in-charge |
| 58 | Providing GI SOCKET 25MM dia of approved quality as per instruction of Engineer-in-charge |
| 59 | Providing GI SOCKET 32MM dia of approved quality as per instruction of Engineer-in-charge |
| 60 | Providing GI SOCKET 40MM dia of approved quality as per instruction of Engineer-in-charge |
| 61 | Providing CPVC Tank nipple 25MM dia of approved quality as per instruction of Engineer-in-charge |
| 62 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 63 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore. |
| 64 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore |
| 65 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore |
| 66 | Providing PVC float valve for existing PVC water tank of make(Watertek/Supreme or equivalent) approved make as per direction of EIC |
| 67 | Providing PVC low level cistern handle as per instruction of Engineer-in-Charge. |
| 68 | Providing PVC low level cistern ballcock 15mm dia as per instruction of Engineer-in-Charge. |
| 69 | Providing PVC low level cistern washer kit as per instruction of Engineer-in-Charge. |
| 70 | Providing Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia as on when required as per instrcution of EIC |
| 71 | Providing and fixing C.P. shower rose with arm (Plaza brand or equivalent) of approved quality complete as per instruction of Engineer-in-Charge. with 15 rnm or 20 mm inlet 100 mm diameter |
| 72 | Providing M-seal adhesive or equivalent (in packets of 100 gm) as per instruction of Engineer-in-Charge. |
| 73 | Providing PVC wall plug of approved make as per direction of EIC |
| 74 | Providing solvent cement of 100 gm in suitable container for jointing PVC pipes of approved make as per direction of EIC |
| 75 | Providing polyethylene water storage tank cover as per instruction of Engineer-in-charge. |
| 76 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 77 | Carpentary Work:Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 78 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick pre laminated PVC door shutters: |
| 79 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. |
| 80 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 81 | Providing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges 100x75x3.50 mmwith necessary screws etc. complete :as on when required as per instrcution of EIC |
| 82 | Providing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 100 mm as on when required and as per instruction of EIC |
| 83 | Providing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge as on when required and as per instrcution of EIC(200 MM) |
| 84 | Providing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : Anodised Aluminium handles 125 mm with plate 175 x 32 mmas on when required as per instrcution of EIC |
| 85 | Providing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 X10 as on when required as per instrcution of EIC |
| 86 | Providing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150 X10 as on when required as per instrcution of EIC |
| 87 | Providing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200 X10 as on when required as per instrcution of EIC |
| 88 | Providing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper as on when required as per instcrution of EIC |
| 89 | Providing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300X 16 as on when required as per instcrution of EIC |
| 90 | Providing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250 X 16 as on when required as per instcrution of EIC |
| 91 | Providing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete as on when required as per instcrution if EIC |
| 92 | Providing magnetic catcher of approved quality in cupboard/ ward robe shutters, including fixing with necessary screws etc. complete.Magenatic catcher double strip horizontal type.as on when required as per instcrution of EIC |
| 93 | providing Chromium plated Brass screws 25 mm, as on when required as per instrcution of EIC |
| 94 | providing Chromium plated Brass screws 20 mm, as on when required as per instrcution of EIC |
| 95 | providing Chromium plated Brass screws 30 mm, as on when required as per instrcution of EIC |
| 96 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 97 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 98 | Providing sliding glass runner as per instruction of Engineer-Charge. |
| 99 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 50 x 100 mm |
| 100 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)30 mm thick |
| 101 | Providing factory made single extruded WPC(Wood Polymer Composite) solid plain white coloured board of 18 mm thick. |
| 102 | Providing factory made single extruded WPC(Wood Polymer Composite) solid plain white coloured board of 12 mm thick. |
| 103 | Providing factory made single extruded WPC(Wood Polymer Composite) solid plain white coloured board of 6 mm thick. |
| 104 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal ofminimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 105 | Removing of damage glass panes & providing and fixing black /brown glass panes in door /window with sliding glass runner, rubber and necessary screws fitting as per instruction of Engineer-Charge. |
| 106 | Providing different size of steel screw as per instruction of EIC. |
| 107 | Providing different size of MS screw as per instruction of EIC. |
| 108 | Providing M.S nail of different sizes of approved make as per direction ofEIC |
| 109 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer- in-charge.With stainless steel cover plate minimum 1.25 mm thickness |
| 110 | Re-fixing old glass panes with putty and nails |
| 111 | Providing SS wire mesh jali for doors and windows of 22 gauge 18 mesh per sq inch as per instruction of of Engineer-in-charge. Grade 304 |
| 112 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to lS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) : 115mm |
| 113 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 114 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately) |
| 115 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 GradelTypell,in panelling fixed in aluminum doors,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. |
| 116 | Providing of Stainless steel (Grade-304)hollow section round/square tubes. |
| 117 | Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thickconforming to IS:14587 |
| 118 | Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thickconforming to IS:14587 |
| 119 | Providing 4'' cutter wheel in a phased manner of approved make as per direction of EIC |
| 120 | Providing welding rod as per instruction of of Engineer-in-charge. |
| 121 | Providing fevicol pasti lok for pasting laminates on WPC/PVC boards or equivalent adhesive of approved quality as per instruction of Engineer-in-charge. |
| 122 | Providing 1 mm thick laminate of approved quality as per instruction of Engineer-in-Charge. (8'x4') |
| 123 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 124 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. |
| 125 | Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). |
| 126 | Providing 653 - Dr fixit Roof seal select heavy duty Rainforced traffic water proof coating coverage 7-8 Sqft /L/3 or equivalent make coat as per instruction of Engineer-in-charge. |
| 127 | Providing 653 - Dr fixit prime seal select heavy duty Rainforced traffic water proof coating coverage 7-8 Sqft /L/3 or equivalent make coat as per instruction of Engineer-in-charge. |
| 128 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 129 | Colouring Work:Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat |
| 130 | Applying priming coats with primer of approved brand and manufacture, having low VoC (Volatile OrEanic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 131 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 132 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 133 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour : old work (one or more coats) |
| 134 | Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 Itr/ 10 sqm) on existing cement paint surface |
| 135 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 136 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 137 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 138 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping. sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 139 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 140 | Shifting of all necessary items and miscellaneous items and keeping again it in proper order as on when required as per instruction of EIC. |
| 141 | Re-lettering with black Japan paint of approved brand and manufacture. |
| 142 | Civil Work :Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.: Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 143 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 144 | Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. |
| 145 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet |
| 146 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar |
| 147 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift , including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 148 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 149 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 40mm nominal size derived from natural sources) |
| 150 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources). |
| 151 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blockr, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1.5:3 (1 cement: 1.5 coarse sand {zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources). |
| 152 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level : 1:4:8 (1 Cement :4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40mm nominal size derived from natural sources) |
| 153 | Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 154 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.: 40 mm thick with 20 mm nominal size stone aggregate |
| 155 | Brick work with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 156 | Brick work with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 157 | Half brick masonry with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) |
| 158 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 159 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 160 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 161 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 162 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Enganeer-in-charge. |
| 163 | Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).: Medium shade pigment using 50% white cement 50% Grey cement |
| 164 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 165 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 166 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 167 | Supply of river clean sand for miscellaneous works including royalty as per instruction of of Engineer-in-charge. |
| 168 | Supply of crusher broken stone metal (20mm and down gauge) for misc works including royalty as per instruction of of Engineer-in-charge. |
| 169 | Supply of cement (as per IS:269) as per instruction of Engineer-in-charge. |
| 170 | Supply of Fly Ash bricks of Class designation 10 for misc works including royalty as per instruction of Engineer-in-charge. |
| 171 | Providing white cement (1 Kg pack) J&K or Birla or approved equivalent brand as per instruction of Engineer-in-charge. |
| 172 | Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming toIS:15622 ,of approved brand & manufacturer, inall colour sand shade, laidon 20mm thick cement mortar1:4(1cement:4coarse sand) jointing withgrey cements lurry @ 3.3kg/sqm including grouting the joints with white cement and matchingpigments etc . The tiles mustbecut witht hezerochipping diamond cutter only. Laying of tiles will be done with then otchtrowel , plier , wedge , clip sofrequiredthickness ,leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size. Size of Tile 600 x 1200 mm |
| 173 | Providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre-polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab all colour and texture except black, Cherry/ Ruby red: Area of slab over 0.50 sqm |
| 174 | Maintenance Workers:Labour charges including tools and plants for day to day maintenance work like brick work, plastering, flooring and other petty jobs as and when required on daily basis by deploying masons. Beldar /coolie in residential quarters of Jagruti Vihar Colony (Materials to be used in this item are to be paid separately) as per instruction of Engineer-in-charge. (1 Skilled and 1 unskilled worker per day) |
| 175 | Day to day maintenance of, water supply net work and plumbing work etc. with all labour cost but ercluding cost of materials as per instruction of Engineer lncharge.(2 Plumber and 2 helper per day) |
| 176 | Labour charges of deploying 2 (two) Skilled Carpenter and 02 (two) unskilled helper for day to day maintenance works related with Carpentray works as per instruction of Engineer-in-charge |
| 177 | Labour charges for day to day maintenance works related with welding works like welding of hinges, welding of flats in window grills and other petty jobs related with welding works as and when required by deploying welder beldar/coolie in residential quarters of Jagruti Vinar colony. (welding rod and electricity is to be provided by the department as per instruction of Engineer-in-charge. (1 Skilled and 1 unskilled worker per day) |
| 178 | Providing Technical assitance /Supervisor for Supervision of work andassiting the dept and having good academic record and knledge ofcomputer etc to prepare report etc and work as per instruction ofEngineer-in-Charge (01 highly skilled person per day) (EXCLUDING ALL SUNDAYS) |
| 179 | Providing hydraulic Excavator (3D ) for urgent and miscellaneous activities as on when required including fuel and manpower as per instruction of EIC |
| 180 | Day to day Maintenance likes tile grouting in toilet , office and sourding area ,patch repairing, patch painting and colouring, remove tree growth for building wall and etc, semi-skilled labour cost but exclud ing of materials as per instruction of EIC |
| 181 | Providing and fixing in wall lining 4 mm thick ACP Sheet using screws, rawl plug and adhesives as per direction of EIC |
| 182 | Providing and fixing charcoal louvers panel of size 0.125x2.4 mtr, 5 mm thick on existing aluninium |AR based framework or other surface using adhesive/screws etc. as per direction of EIC. |
| 183 | PART B - Annual upkeeping of corporate office building and campus at jagruti Vihar MCL HQ Sambalpur for 02 year.(WITH ITC AVAILABILITY) |
| 184 | Up keeping of inside office/ service / welfare buildings including: a)Cleaning of floors by brooming and mopping, walls ceiling, partitions,chairs, tables, almirahs, staircases, verandahs, balconies, window glasspanes, small drain adjoining plinth protection etc. once in a day in theoffice building daily in all working days. (b) Cleaning of bathroom / toiletsonce in a day with water, detergent, phenyl etc. daily in working daysinclusive of Cost of detergents and other toiletaries as per the direction of Engineer-In-Charge.(Supply of different cleaning material & toiletaries:- Flush matic (Harpic) or equivalent as approved by EIC. Sulfuric acid Handwash: Dettol or equivalent approved by ElC. Odonil or equivalent as approved by ElC. Nepthalene balls Bengal chemicals or equivalent as approved by ElC. Detergent Soap based multi-use cleanser Bleaching powder) ( One un-skilled labour per 400sqm). |
| 185 | Cleaning and brooming of floor areas like chequered tiles, paver block, IPS floors, including applying water, detergents etc adequately all complete as per the direction of Engineer-In-Charge.( One un-skilled labour per 1000sqm) |
| 186 | cleaning and brooming of floor areas like chequered tiles, paver block, IPS floors like concrete pavement/ Black topped roads, excluding coaltransport road by brooming and disposal of collected debris/ waste at collection pit/ dustbins or at specified locations within a lead of 50 metres including all tools & plants like spade, basket, brooms with handle stick complete as per the direction of Engineer-In-Charge.(All un accesed area to be cleaned by mannually)(note : one no Unskilled Labour per 2000 sqm) |
| 187 | Cleaning of toilets (not attached to office/service or welfare buildings), its floor and dados including applying of phenyle, napthalene balls, harpic, detergents etc as per the direction of Engineer-In-Charge. (Cost of Phenyle, naphthalene balls, harpic, detergents etc. to be paid separetely)(note : One unskilled Labour per 10nos toilet) |
| 188 | Removal of chokage / blockage of inspection chambers by removing silt, sludge and other foreign materials and disposal of the same to the nearest dustbins etc. Complete as per the direction of engineer-In-Charge.(note : 04 nos Unskilled Labour per 06 Nos of inspection chambers) |
| 189 | Removal of chokage / blockage of manholes by removing silt, sludge and other foreign materials and disposal of the same to the nearest dustbins etc. Complete as per the direction of engineer-In-Charge.(note : 2 nos unskilled labours for 02 nos manholes cleaning) |
| 190 | Extra for upkeeping work in CMD'S Block, Director/s Blocks and conference Hall as and when required on Sundays and holidays and during GM co-ordination meetings and other important meetings as per instruction ot ElC. Scope of work a) Cleaning of floors, walls ceiling, chairs, tables, window glass panes, etc. once in a day .b) Cleaning of bathroom twice in a day with water,detergent, phenyl .c) Maintenance work as desired by EIC has to be strictly followed on priority basis by the contractor. d) The tools, plants etc required for this work will have to be supplied by the contractor. The cost of tools and plants is included in the cost for the item. e) ln the analysis the unskilled labour has been taken as 01nos. Per day |
| 191 | Extra for upkeeping work in 2nd shift at Director's Blocks & All the Common toilets for ladies and Gents of whole Corporate office building as per instruction ol ElC. Scope ot work: a) Cleaning of floor of all Toilets, Urinals ,WC pan, and wash basins etc. twice in 2nd shift every day by spraying water & Phenyle. b) Maintenance work as desired by EIC has to be strictly followed on priority basis by the contractor. c) The tools, plants etc required for this work will have to be supplied by the contractor. The cost of, tools and plants is included in the cost for the item. d) ln the analysis the unskilled labour has been taksn as 04 nos. Per day |
| 192 | Upkeeping supervisior for daily upkeeping work and reporting to EIC on every working day |
| 193 | Collection of garbage from different places of corporate office buildings and campus,Mt hostel and disposal of the same at a suitable place as earmarked by Municipality/local authorities by suitable mechanical arrangement (Tractor) including loading, unloading etc. Complete with all leads as per instruction of Engineer-in-Charge. (Tractor of 3.00 Cum capacity to be engaged at least twice in a week and no garbage shall be dumped in colony premises. Tractor trip in colony premises should be duly authenticated by concerned TA authorities. Garbage shall be covered properly and tied in order to avoid any slippage during transit). Note: Hire charge of tractor is inclusive of lead of 10 KM. The lead may vary as per the requirement. |
| 194 | Shifting of all necessary items and miscellaneous items and keeping again it in proper order as on when required as per instruction of EIC. |
| 195 | supply of cleaning material multisurface cleaner colin 500 ml or equivalent approved by EIC |
| 196 | Supply of cleaning material room freshner 240 ml or equivalent as approved by EIC. |
| 197 | Supply of cleaning material insect pest killer spray HIT 200 ml or equivalent as approved by EIC |
| 198 | supplying of handwash liquid of 200 ml Dettol or any equivalent as per instruction of EIC |
| 199 | Cleaning work of all types of Glasses( Float glass, sensor door, DGU glass etc) and ACP surface fixed over the external periphery of the wall and façade of all building by using all necessary tools, tackles staging, PPEs, safety kits, ropes, body, harness, consumables etc all complete as per instruction of EIC. |
| 200 | Opening and Refixing of panels/glasses of all height of a building by using tools and tackles, scaffolding, screw,tapes with all necessary arrangements etc. all Complete as per instruction of EIC. |
| 201 | Filling of weather silicon at all height wherever required by using tools and tackles, scaffolding, screw, tapes with all necessary arrangements etc.all Complete for as per instructions of EIC. |
| 202 | PART C - Electrical Portion (WITH ITC AVAILABILITY) |
| 203 | Operation of Switchgear and D.G.Set, 500 KVA, 415 volt at Jagruti Vihar/switch room at TPWODL power failure time including substation attendant work. Works includes overall preliminary checking & filling of diesel, other lubricants at periodical interval as per the instruction of Engineer-In-charge for 24 hours every day. (Skilled substation attendant cum DG operator having valid electrical licence-3 nos.) Note: All type of tools & safety apparatus to be provided by the contractor. |
| 204 | Attending electrical breakdown of Jagruti vihar colonies for 24 hours everyday, such as no power complaints general complaints preventive maintenance of feeder pillars, distribution board & pump motors starters etc, specific problems of the light fitting, ceiling fans & bulb fitting etc switch\\" ON\\" & OFF\\" of sub-station, switches of street lights, attending breakdown of cable fault of all natures, temporary connection & disconnection etc, replacement of D.O.Fuse at H.T 11 KV fuse unit etc as required (Supply of said manpower-Skilled electrician having valid electrical licence-06 Nos.. Semi-skilled electrician helper-06 nos., unskilled Helper - 01 no.) Note: All type of tools & safety apparatus to be provided by the contractor. |
| 205 | Upkeeping of Sub-station, Switchyards, lifts, electrical installations, trimming of trees for overhead line & Street lighting clearance (with deployment of minimum 02 nos. Unskilled labour) Note: All type of tools & safety apparatus to be provided by the contractor. |
| 206 | Supply of Piano Type single way switch 6 Amps, 230 V of Anchor/Cona/Havells or of equivalent reputed make |
| 207 | Supply of Piano Type 2 way switch 6 Amps, 230 V of Anchor/Cona/Havells or of equivalent reputed make |
| 208 | Supply of Piano Type single way switch 16 Amps, 230 V Anchor/Cona/Havells or of equivalent reputed make |
| 209 | Supply of Socket, 6 Amp, 5 pin, 230 V Anchor/Cona/Havells or of equivalent reputed make |
| 210 | Supply of Socket, 16/6 Amp, 5 pin, 230 V Anchor/Cona/Havells or of equivalent reputed make |
| 211 | Supply of bell push , piano type swicth of Anchor/Cona/Havells or of equivalent reputed make |
| 212 | Supply of Angle Holder, 6 Amp,230 V of Anchor/Cona/Havells or of equivalent reputed make |
| 213 | Supply of Modular switch 6A of Anchor/Cona/Havells or of equivalent reputed make as required |
| 214 | Supply of Modular switch 16A of Anchor/Cona/Havells or of equivalent reputed make as required |
| 215 | Supply of Modular socket 6A of Anchor/Cona/Havells or of equivalent reputed make as required as required |
| 216 | Supply of Modular socket 16A of Anchor/Cona/Havells or of equivalent reputed make as required |
| 217 | Supply of Modular Stapped type Fan regulator of Anchor/Cona/Havells or of equivalent reputed make as required |
| 218 | Supply of Ding Dong call bell,230v of anchor/cona/Havells or of equvalent reputed make |
| 219 | Supply of 1.5 sqmm PVC insulated, Multistrand copper cable, ISI Marked Single core of Polycab/Finolex/V-guard/Havells or of reputed make |
| 220 | Supply of 2.5 sqmm PVC insulated, Multistrand copper cable, ISI Marked Single core of Polycab/Finolex/V-guard/Havells or of reputed make |
| 221 | Supply of 4 sqmm PVC insulated, Multistrand copper cable, ISI Marked Single core of Polycab/Finolex/V-guard/Havells or of reputed make |
| 222 | Supply of 6 sqmm PVC insulated, Multistrand copper cable, ISI Marked Single core of Polycab/Finolex/V-guard/Havells or of reputed make |
| 223 | Supply of 10 sqmm PVC insulated, Multistrand copper cable, ISI Marked Single core of Polycab/Finolex/V-guard/Havells or of reputed make |
| 224 | Supply of 16 sqmm PVC insulated, Multistrand copper cable, ISI Marked Single core of Polycab/Finolex/V-guard/Havells or of reputed make |
| 225 | Supply of MCB 32-Amp,10 KA, C-Curve230 Volt Single Pole of Havells/L&T/ABB/Legrand or of equivalent reputed make |
| 226 | Supply of MCB 25-Amp,10 KA, C-Curve230 Volt Single Pole of Havells/L&T/ABB/Legrand or of equivalent reputed make |
| 227 | Supply of MCB 16-Amp,10 KA, C-Curve230 Volt Single Pole of Havells/L&T/ABB/Legrand or of equivalent reputed make |
| 228 | Supply of MCB 6-Amp,10 KA, C-Curve230 Volt Single Pole of Havells/L&T/ABB/Legrand or of equivalent reputed make |
| 229 | Supply of 63-Amp,10 KA, C-Curve230 Volt two Pole MCB of Havells/L&T/ABB/Legrand or of equivalent reputed make |
| 230 | Supply of MCB DP 32 Amp, 230 volt of Havells/L&T/ABB/Legrand or of equivalent reputed make |
| 231 | Supply of 63-Amp,10 KA, C-Curve230 Volt fore Pole MCB of Havells/L&T/ABB/Legrand or of equivalent reputed make |
| 232 | Supply of 4 pole, 100A MCCB, 10/20KA short circuit capacity of Havells/L&T/ABB/Schneider or of equivalent make |
| 233 | Supply of 4 pole, 200A MCCB, 10/20KA short circuit capacity of Havells/L&T/ABB/Schneider or of equivalent make |
| 234 | Supply of 4 pole, 400A MCCB, 25-65KA short circuit capacity of Havells/L&T/ABB/Schneider or of equivalent make |
| 235 | Supply of 4 pole, 630A MCCB, 25-65KA short circuit capacity of Havells/L&T/ABB/Schneider or of equivalent make |
| 236 | Supply of 4 pole, 63A ELCB/RCCB, 30mA capacity of Havells/L&T/Schneider/ABB/Legrand of of equivalent reputed make |
| 237 | Supply of 4 pole,40A ELCB/RCCB, 30mA capacity of Havells/L&T/Schneider/ABB/Legrand of of equivalent reputed make |
| 238 | Supply of 2 pole, 63A ELCB/RCCB, 30mA capacity of Havells/L&T/Schneider/ABB/Legrand of of equivalent reputed make |
| 239 | Supply of 2 pole, 40A ELCB/RCCB, 30mA capacity of Havells/L&T/Schneider/ABB/Legrand of of equivalent reputed make |
| 240 | Supply of 3 mm thick phenolic laminated sheet |
| 241 | Supply of PVC conduit / Pipe 25 mm |
| 242 | Supply of PVC conduit / Pipe 20mm |
| 243 | Supply of PVC coupler/ saddle 20mm |
| 244 | Supply of PVC coupler/saddle 25mm |
| 245 | Supply of PVC bend 20 mm |
| 246 | Supply of PVC bend 25 mm |
| 247 | Supply of 600 Amp Aluminium Bus bar chamber as per standard IE Specifications |
| 248 | Supply of Aluminium Socket 10 sq mm |
| 249 | Supply of Aluminium Socket 16 sq mm |
| 250 | Supply of Aluminium Socket 25 sq mm |
| 251 | Supply of Aluminium Socket 35 sq mm |
| 252 | Supply of Aluminium Socket 50 sq mm |
| 253 | Supply of Aluminium Socket 70 sq mm |
| 254 | Supply of Aluminium Socket 95 sq mm |
| 255 | Supply of Aluminium Socket 120 sq mm |
| 256 | Supply of Aluminium Socket 185 sq mm |
| 257 | Supply of Aluminium Socket 240 sq mm |
| 258 | Supply of Aluminium Socket 300 sq mm |
| 259 | Supply of 4 way MCB DB with cover (Mild steel) |
| 260 | Supply of SPN MCB 12 way distribution Box, Double door, horizontal type |
| 261 | Supply of 200mm x 150 mm Danger plate |
| 262 | Pin Insulator with GI-Pin LT 11KV (Polymer type) |
| 263 | Pin Insulator with GI-Pin LT 33KV (Polymer type) |
| 264 | Supply of Disc Insulator 11KV/33KV |
| 265 | Supply of 3 piece lightning arrester set for 11kv O.H lines |
| 266 | Supply of Paint as Required |
| 267 | Supply of Cotton waste, cleaning cloth etc. |
| 268 | Supply of single pole, Blanking Plate |
| 269 | Supply of steel Fastener 6MM X 75MM |
| 270 | Supply of steel Fastener 8MM X 75MM |
| 271 | Supply of Cleaning material like Soap / Detergent |
| 272 | Supply of sheet steel TP MCB enclosure |
| 273 | Supply of CEILING ROSE,3 PIN ,5 AMPS ISI MARKEKED, 230 V of Anchor/Cona/Havells or of equivalent reputed make |
| 274 | Providing and laying in position cement concrete 1:3:6 (1 cement: 2 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. |
| 275 | providing Outdoor cable joint Kit with cast resin compound with lugs for 31/2 x 120 sq. mm 1.1 KV grade cable |
| 276 | providing Outdoor cable joint Kit with cast resin compound with lugs for 31/2 x 150 sq. mm 1.1 KV grade cable |
| 277 | providing Outdoor cable joint Kit with cast resin compound with lugs for 31/2 x 185 sq. mm 1.1 KV grade cable |
| 278 | providing Outdoor cable joint Kit with cast resin compound with lugs for 31/2 x 240 sq. mm 1.1 KV grade cable |
| 279 | Rewinding of ceiling fan with copper winding, varnishing, required bearings,rubber bush with clamp as required |
| 280 | Painting of street light pole of 8 to 10 meters height including arm and pole box with one coat of red oxide primer and two or more coat of aluminium paint of reputed make including cost of cleaning of the pole by emery paper and wire brush etc as required |
| 281 | Supply of Plug top, 16 amp, 3 pin, 230 V of Anchor/Cona/Havells or of equivalent . |
| 282 | Supply of Plug top, 6 amp, 3 pin, 230 V of Anchor/Cona/Havells or of equivalent . |
| 283 | Supply of stepped switch type regulator of Anchor/Cona/Havells or of equivalent reputed make |
| 284 | Supply of fan capacitor, 2.5 mfd, 230 V of reputed make |
| 285 | Supply of 2core X 6 sqmm, CTS alluminium wire of Polycab/Finolex/V-guard/Havells or Euivalent reputed make |
| 286 | Supply of 2core X 4 sqmm, CTS alluminium wire of Polycab/Finolex/V-guard/Havells or of reputed make |
| 287 | Supply of PVC Insulated twin core copper flexible wire 40/60, 230 V of of Polycab/Finolex/V-guard/Havells or of reputed make |
| 288 | Supply of LED tube light complete fitting, 18/20 Watt of Syska/Wipro/Bajaj/Crompton/Phillips or of equivalent reputed make |
| 289 | Supply of 10 W LED B22 bulb of Syska/Wipro/Bajaj/Crompton/Phillips or of equivalent reputed make |
| 290 | Supply of 15 W LED B22 bulb of Syska/Wipro/Bajaj/Crompton/Phillips or of equivalent reputed make |
| 291 | Supply of MCB Cover Double Pole reputed make |
| 292 | Supply of Heavy Duty PVC Board of 4\\"x4\\"x2\\" size of pressfit/Hi Plasst or of equivalent reputed make |
| 293 | Supply of Heavy Duty PVC Board of 4\\"x6\\"x2\\" size of pressfit/Hi Plasst or of equivalent reputed make |
| 294 | Supply of Heavy Duty PVC Board of 6\\"x8\\"x2\\" size of pressfit/Hi Plasst or of equivalent reputed make |
| 295 | Supply of Heavy Duty PVC Board of 8\\"x10\\"x2\\" size of pressfit/Hi Plasst or of equivalent reputed make |
| 296 | Supply of PVC Insulated adhesive tape 3/4\\", 10 mtrs long |
| 297 | Supply of Rubber tape, 3/4\\" size, 10 mtr roll |
| 298 | Supply of Empire tape ,L-30 m, W-1'' |
| 299 | Supply of Casing caping(reputed make) 1/2\\" (1no=3mtr) |
| 300 | Supply of Casing caping (reputed make) 3/4\\" (1no=3mtr) |
| 301 | Supply of Glass Tape, 1\\" size, 40 mtr length,Width- 1'' |
| 302 | Supply of 100 Amp copper Bus bar chamber as per standard IE Specifications |
| 303 | Supply of 200 Amp copper Bus bar chamber as per standard IE Specifications |
| 304 | Supply of Copper Socket 16 sq mm |
| 305 | Supply of Copper Socket 25 sq mm |
| 306 | Supply of LED street light 90 watt, with minimum Lumen capacity of 100Lm/W, voltage range of 180V - 300V or higher of Syska/Bajaj/Crompton/ Havells/Phillips or of equivalent reputed make |
| 307 | Supply of LED down light 6\\" dia, 15 watt with minimum Lumen capacity of 100Lm/W, voltage range of 180V - 300V or higher of Syska/Bajaj/Crompton/ Havells/Phillips or of equivalent reputed make |
| 308 | Supply of 250W LED Flood light with minimum Lumen capacity of 100Lm/W, voltage range of 180V - 300V or higherof Syska/Bajaj/Crompton/ Havells/Phillips or of equivalent reputed make |
| 309 | Supply of 30W LED Downlight with minimum Lumen capacity of 100lm/w. voltage range of 180V - 300V or hqher of Syska/Bajaj/Crompton/ Havells/Phillips or of equivatent reputed make |
| 310 | Supply of 30W LED Wallkit light of Syska/Bajaj/Crompton/ Havells/Phillips or of equivalent reputed make |
| 311 | Supply of Bearing 6200-ZZ |
| 312 | Supply of Bearing 6201-ZZ |
| 313 | Supply of Bearing 6202-ZZ |
| 314 | Supply of Bearing 6203-ZZ |
| 315 | Supply of 0.5 W LED colour bulb of Syska/Bajaj/Crompton/Havells/Phillips or of equivalent reputed make |
| 316 | Supply of Casing caping nail pkt. (100 pcs) |
| 317 | Supply of heavy duty Metal hacksaw blades 12 x 300 mm steel cutting saw blades |
| 318 | Supply of Steel Screw 1/2'' (1 pkt - 500 nos.) |
| 319 | Supply of Steel Screw 3/4'' size 8x25 (1 pkt - 500 nos.) |
| 320 | Supply of Steel Screw 1.5'' size 10x50 (1 pkt - 500 nos.) |
| 321 | Supply of Steel Screw 1'' size 10x50 (1 pkt - 500 nos.) |
| 322 | Supply of Steel Screw 3'' size 10 x 75 (1 pkt - 500 nos.) |
| 323 | Supply of flexible pvc pipe 25mm size |
| 324 | Supply of Hammer Drill (min. 720W capacity) |
| 325 | Supply of Cutter/Angle grinder (min. 670W), profesional, heavy duty usage of Bosch or of equivalent reputed make |
| 326 | Supply of Pole box with Terminal Block, GLAND,MCB & clamp, as required |
| 327 | Supply of Extension switch board (1.5 Mtrs) |
| 328 | Supply of 5W LED MIRROR LIGHT of Syska/Wipro/Bajaj/Crompton/Phillips or of equivalent reputed make |
| 329 | Supply of 3W LED down LIGHT of Syska/Wipro/Bajaj/Crompton/Phillips or of equivalent reputed make |
| 330 | Supply of Post Insulator 11KV/33KV |
| 331 | Supply of Hydraulics Crimping Tool (10-400sqmm) |
| 332 | Supply of Chemical Earthing (min. 2.15 mtr) as per IE rules |
| 333 | Supply of WHITE GREASE (per 100 ml) |
| 334 | Supply of PVC Gripper (Wall plug) 50mm (pkt - 100 nos.) |
| 335 | Supply of PVC Gripper (Wall plug) 75mm (pkt - 100 nos.) |
| 336 | Supply of PVC Gripper ( wall plug ) 40mm (pkt - 100 nos.) |
| 337 | Supply of Silica Gel (Silica Gel Blue Crystal) |
| 338 | Supply of Silicone Gasket compound -85GMS -High Temp |
| 339 | Supply of Petroleum Jelly |
| 340 | Supply of Rust remover (CRC (500 ml)) as per the requirement |
| 341 | Supply of LED strip light (8mm with 2 amps Adopter) 20 mtrs as required of WIPRO or of equivalent reputed make |
| 342 | Supply of LED adoptor with connecting male-female connectors, plug type as requiredas required |
| 343 | Supply of Push button block (ON/OFF) reputed make |
| 344 | Supply of RYB LED phase Indicators, 230V AC, reputed make |
| 345 | Supply of Cordless Call Bell |
| 346 | Supply of PVC Pipe 1\\" ( 1mm thick) in mtr |
| 347 | Supply of Battery AA/AAA |
| 348 | Supply of 4 Meter Total Heat shrink Tube size 1mm - 10mm 1mtr each of Red, Yellow, Blue & Black colour |
| 349 | Supply of 4 Pole 800A MCCB With Spreader Link 25-65KA short circuit capacity of Havells/L&T/ABB/Schneider or of equivalent make |
| 350 | Supply of Transformer Breather (1KG) |
| 351 | Supply of Transformer Breather (2KG) |
| 352 | Supply of Thinner |
| 353 | Supply of Cable Zip Ties 200 X 3.5 Mm (100) |
| 354 | Supply of Cable Zip Ties 200 X 2.5 Mm (100) |
| 355 | Supply of Angle Grinder Blade of Reputed Make |
| 356 | Supply of 12 Volt Dc Supply ,400W (SMPS) ,Rainproof of Reputed Make |
| 357 | Supply of 12 Volt. 2 Watt DC Capsule Shape Led Module Strip Lights |
| 358 | Supply of 400W LED Flood light with minimum Lumen capacity of 100Lm/W, voltage range of 180V - 300V, IP 65 (water resistent) or higher of Syska/Bajaj/Crompton/ Havells/Phillips or of equivalent reputed make |
| 359 | Supply of Hammer Impact Drill Bit Sds Size 5 X 110Mm Reputed Make |
| 360 | Supply of Hammer Impact Drill Bit Sds Size 6 X 110Mm Reputed Make |
| 361 | Supply of Hammer Impact Drill Bit Sds Size 8 X 160Mm Reputed Make |
| 362 | Supply of Hammer Impact Drill Bit Sds Size 16 X 310Mm Reputed Make |
| 363 | Supply of (3.15 x 350 mm) All Purpose Welding Rod reputed make |
| 364 | Supply of 50Amp Aluminum Bus bar chamber as per standard IE Specifications reputed make |
| 365 | Supply of Khas Khas of required size suitable for Desert Water cooled type Fan |
| 366 | Supply of Tinned Copper Fuse Wire 20A (27 Swg) 100Gm |
| 367 | Supply of Tinned Copper Fuse Wire 30A (24 Swg) 100Gm |
| 368 | Supply of 33/11Kv Goab Switch With Full Fitting, Current Rating-1250A,Mounting Type: Horizontal, |
| 369 | Supply of Connection Plate (TPN) 63A As required |
| 370 | Supply of Digital Voltmeter (L&T And Equivalent Reputed Make) |
| 371 | Supply of Digital Ammeter (L&T And Equivalent Reputed Make)) |
| 372 | Supply of Pvc Saddle (6Mm) 100 Nos Pkt |
| 373 | SUPPLY OF SPOT LIGHT 7 WATT of Syska/Wipro/Bajaj/Crompton/Phillips or of equivalent reputed make |
| 374 | SUPPLY OF SPOT LIGHT 10 WATT of Syska/Wipro/Bajaj/Crompton/Phillips or of equivalent reputed make |
| 375 | Supply of LED strip light (TRI COLOUR) 25 mtrs of reputed make as required |
| 376 | SUPPLY OF BUSBAR INSULATOR as required |
| 377 | SUPPLY OF kit kat fuse 200A of reputed make |
| 378 | Supply of 5W LED down LIGHT of Syska/Wipro/Bajaj/Crompton/Phillips or of equivalent reputed make |
| 379 | Supply of CEILING FAN PLATE |
| 380 | Supply of 0.75 sqmm PVC insulated, Multistrand copper cable, ISI Marked Single core of Polycab/Finolex/V-guard/Havells or of reputed make |
| 381 | Supply of 4 sqmm PVC insulated, Multistrand copper cable, ISI Marked Four core of Polycab/Finolex/V-guard/Havells or of reputed make |
| 382 | Supply of 6 sqmm PVC insulated, Multistrand copper cable, ISI Marked Four core of Polycab/Finolex/V-guard/Havells or of reputed make |
| 383 | Supply of 1.5 sqmm PVC insulated, Multistrand copper cable, ISI Marked Three core of Polycab/Finolex/V-guard/Havells or of reputed make |
| 384 | Supply of 2.5 sqmm PVC insulated, Multistrand copper cable, ISI Marked Three core of Polycab/Finolex/V-guard/Havells or of reputed make |
| 385 | Supply of 4 sqmm PVC insulated, Multistrand copper cable, ISI Marked Three core of Polycab/Finolex/V-guard/Havells or of reputed make |
| 386 | Supply of Cable Saddle steel (Clamp) As required |
| 387 | supply of 630A onload change over switch alongwith suitable mounting arrangement,with complete Encloser system and nut bolts etc.as per the site requirement of schneider / L & T / Havels or equivalent reputed make |
| 388 | supply of 400A onload change over switch alongwith suitable mounting arrangement,with complete Encloser system and nut bolts etc.as per the site requirement of schneider / L & T / Havels or equivalent reputed make |
| 389 | supply of 250A onload change over switch alongwith suitable mounting arrangement,with complete Encloser system and nut bolts etc.as per the site requirement of schneider / L & T / Havels or equivalent reputed make |
| 390 | Supply of Aluminium Socket 400 sq mm |
| 391 | Supply of Aluminium Tubular Inline Straight Joints socket 400 sq mm |
| 392 | Supply of Aluminium Tubular Inline Straight Joints socket 300 sq mm |
| 393 | Supply of Aluminium Tubular Inline Straight Joints socket 240 sq mm |
| 394 | Supply of Aluminium Tubular Inline Straight Joints socket 150 sq mm |
| 395 | Supply of Aluminium Tubular Inline Straight Joints socket 120 sq mm |
| 396 | Supply of Aluminium Tubular Inline Straight Joints socket 70 sq mm |
| 397 | Supply of Aluminium Tubular Inline Straight Joints socket 50 sq mm |
| 398 | Supply of Aluminium Tubular Inline Straight Joints socket 35 sq mm |
| 399 | Supply of 1.1 KV Grade 4 core 10 sq.mm Aluminium Armoured Cable Make: polycab, EELCO, KEI or of Equivalent make |
| 400 | Supply of 1.1KV grade, 4 core, XLPE sheathed stranded, armoured, 25 sq.mm aluminium cable of Polycab/Finolex/Havells or of equivalent reputed make |
| 401 | supply of 20mm pvc circular box (one way) |
| 402 | supply of 20mm pvc circular box (two way) |
| 403 | supply of 20mm pvc circular box (three way) |
| 404 | supply of 20mm pvc circular box (four way) |
| 405 | supply of 25mm pvc circular box (one way) |
| 406 | supply of 25mm pvc circular box (two way) |
| 407 | supply of 25mm pvc circular box (three way) |
| 408 | supply of 25mm pvc circular box (four way) |
| 409 | Supply of GI Nut Bolt with washer as per the requirement |
| 410 | Providing of MN-5 Thermal overload relay with start and off/ reset (Cat No-SS94136OOEO) Ranse 20-33A |
| 411 | Providing of MN-5 Thermal overload relay with start and off/ reset (Cat No-SS94136OOGO) Ranse 30-50A |
| 412 | Providing of Electronic Timer Type ST 100 (3-30 secs) Cat No ST 803280000 |
| 413 | Providing of 3-Pole Power Contractors type ML-4 (Cat No SS 90910) |
| 414 | Providing of MNX-25 Contactor ranging from 25-45 A, (Cat No-CS94110) |
| 415 | Supply of Analog Voltmeter (L&T or Equivalent reputed Make) |
| 416 | Supply of Analog Ammeter (L&T or Equivalent reputed Make) |
| 417 | Supply of 630A ON LOAD Manual change over switch alongwith suitable mounting arrangement,with complete Enclosure system and nut bolts etc.as per the site requirement of schneider / L&T / Havels or equivalent reputed make |
| 418 | Supply of MCB DP 40 Amp, 230 volt of Havells/L&T/ABB/Legrand or of equivalent reputed make |
| 419 | Supply of 3 core, 6 sqmm, XLPE sheathed stranded Aluminium conductor armoured cable of Polyeab/Finolex/V-guard/Havells or of equivalent reputed make |
| 420 | Pvc Electrical HT Insulation Tape |
| 421 | Supply of Aluminum straight through aluminum lug 25sq. mm |
| 422 | supply of aluminum straight through aluminum lug 185sq. mm |
| 423 | Supply of Copper Socket/Lug 6 sq mm |
| 424 | HT-stay set (complete set) |
| 425 | Supply of Post Insulator 11 Kv grade Polymer type or as per suitable required model with all the necessary fitting arrangements as required. |
| 426 | Supply of Post Insulator 33 Kv grade Polymer type or as per suitable required model with all the necessary fitting arrangements as required. |
| 427 | Supply of L.T shackle insulator with fitting accessories as per the site requirement |
| 428 | Supply of L.T pin insulator with with fitting accessories as per the site requirement |
| 429 | Supply of Single piece 33kv Lighting arrester (Polymer) Polymer type |
| 430 | Supply of 33KV level Current Transformer (CT) of 400-200-100/1 range with all the required accessories for suitable installation as per the site requirement |
| 431 | Supply of 33KV level Potential Transformer (PT) of 33KV/110v range with all the required accessories for suitable installation as per the site requirement |
| 432 | Supply of II KV level Current Transformer (CT) of 400-200-100/1 range with all the required accessories for suitable installation as per the site requirement |
| 433 | Supply of 11KV level Potential Transformer (PT) of 11KV/110v range with all the required accessories for suitable installation as per the site requirement |
| 434 | Supply of Straight Cross Arm C-chanel 4-way (Approx. 7Kgs) |
| 435 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and sait as required. (Manpower shall be provided from the regular manpower) |
| 436 | Supply of CABLE TAGS (Self Locking Yellow Flexible Cable Marker PVC Ferrules (Numbered 0 to 9 1 sqmm) |
| 437 | Supply of Loctite 243 (High Strength 50 MI Heavy Duty Thread locker) |
| 438 | Supply of 200-250 micro Fd Capacitor (Working Voltages 275 v) |
| 439 | Supply of 3 pole contactor of 16Amp, 230V AC coil voltage range with Auxillary Contact 01 NO & 01 NC |
| 440 | supply of 3 pole power contactor, L&T make, model 'MCX47\\", coil voltage 230v. |
| 441 | supply of auxiliary contact block type 'MNX-A6, L&T, compatible with contactor 'MNX47. Side mounting type. 1 N.O and IN.C. |
| 442 | supply of spare contact kit for L & T power contactor 'MNX47' |
| 443 | supply of spare coil for L&T Power contactor 'MNX47',coil voltage 230 v ac. |
| 444 | Supply of 440V/LT Stariaght through Cable joint kit, 4 core, 95 sq.IRm size of 3M/Ravchem or equivalent reputed make |
| 445 | Supply of 440V/LT Stariaght joint kit, 4 core, 70 sq.mm size of 3M/Ravchem or equivalent reputed make 3M/Raychem |
| 446 | Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required 120sq.mm |
| 447 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required, 120 sq.mm |
| 448 | Providing of Thermal overload relay Range 3-10A as per requirement |
| 449 | Providing of Thermal overload relay Range 45-75A as per requirement |
| 450 | Providing of Thermal overload relay Range 9-20A as per requirement |
| 451 | Providing of austronomical time switch like L&T , SIMENS of as per requirement |
| 452 | Providing of Add on auxilary block type MNX 9-80, mounting type 2 NO +2 NC as per requirement |
| 453 | Providing of Add on auxilary block type MNX 9-80, mounting type 1 NO +1 NC as per requirement |
| 454 | Providing of Add on auxilary block type ML. (Cat no CS91494), type 1 NO + 1 NC |
| 455 | Providing L&T ML Spare Contact Kit SS95311-ML 4 or as per requirement |
| 456 | Providing of spare contact kit and spare coil for ML.4 contactor as per requirement |
| 457 | Providing of spare contact kit and spare coil for MNX25 contactor as per requirement |
| 458 | Supply of Ceramic 63 A 415V Kit Kat Fuse |
| 459 | Supply of Ceramic 100 A 415V Kit Kat Fuse |
| 460 | Supply of Ceramic 500 A 415V Kit Kat Fuse |
| 461 | Supply of multi function meter (voltage, current, P. f etc) with applicable C.T. auxiliary supply voltage 230 v ac, |
| 462 | Supply of voltage or current selector switch(rotary type) |
| 463 | Supply of 200A manual on load changeover (ON-NEUTRAL-ON) switch longwith suitable mounting arrangement,with complete Enclosure system and nut bolts etc.as per the site requirement of L&T, Siemens, Havells or equivalent reputed make |
| 464 | Supply of 100A manual on load changeover (ON-NEUTRAL-ON) switch longwith suitable mounting arrangement,with complete Encloser system and nut bolts etc.as per the site requirement of L&T, Siemens, Havells or equivalent reputed make |
| 465 | supply of battery terminal clamp +ve |
| 466 | supply of battery terminal clamp-ve |
| 467 | Supply of Transformer's LT Bushing accessories including Bush rod, rubber bushes, bushing insulator, gasket, sealant, etc |
| 468 | Supply of led foot light, 2-10W capacity, 230v ac as required |
| 469 | Supply of 33KV level insulation mat |
| 470 | Air Conditioning Part: Deployment of labour for maintenance of Spilit & Window Air Conditioners( 1 no Highly Skilkled, 5 nos Skilled ,11 nos Semi-Skilled and suitable reliver in case of Rest and absent may be provided) in shift duty basis as per requirement as instruction of EIC.) Having diploma in Electrical or Electrical Supervisor licence having minimum MV grade and adequate knowledge in computer for Highly Skilled Person. Having ITI certificate in Refrigeration & Air conditioner Trade or Passed in Electrician Trade in ITI having Lineman/Workman Permit-MV OR Minimum 3 years experience in Air Conditioning maintenance work in both single phase & three phase AC for Skilled person. Having ITI certificate in Refrigeration & Air conditioner Trade or Passed in Electrician Trade in ITI having Lineman/Workman Permit-MV OR Minimum 1 years experience in Air Conditioning maintenance work in both single phase & three phase AC for Semi-Skilled person. |
| 471 | Supply of spares parts for the maintenance of Split & Window Air Conditioners for a period of two years for 615 nos AC (All required materials and spare parts for Split & Window AC is to be provided by the contractor during his CAMC period) |
| 472 | Supply of spares parts for the maintenance of the 3TR Tower Air Conditioners for a period of two years for 25 nos(All required materials and spare parts for Tower AC is to be provided by the contractor during his CAMC period) |
| 473 | Supply of spares parts for the maintenance of the 4TR Tower Air Conditioners for a period of two years for 18 nos(All required materials and spare parts for Tower AC is to be provided by the contractor during his CAMC period) |
| 474 | Comprehensive Annual Maintenance of air cooled packaged Air Conditioner of Raganigandha Club (Tonnage capacity of 88 TR) and VRF of Gulf course(Tonnage capacity of 23.5 TR), Sports Complex(Tonnage capacity of 32 TR) & New office Building(Tonnage capacity of 348.8 TR) Total TR- 491.86 TR Jagruti Vihar,MCL HQ(All required materials and spare parts for AC\\"s is to be provided by the contractor during his CAMC period) |
| 475 | Supply of Copper pipe 3/8\\" |
| 476 | Supply of Copper pipe 5/8\\" |
| 477 | Supply of Copper pipe 6/8\\" (4TR) |
| 478 | Supply of Insulation Pipe 3/8\\",5/8\\" & 6/8\\" Size |
| 479 | Supply of Copper pipe 1/2\\" |
| 480 | Supply of Copper pipe 1/4\\" |
| 481 | Supply of remote battery(1 set=02 nos) |
| 482 | Supply of 1/2 inch PVC drain Pipe Please Enable Macros to View BoQ information |
| 483 | Supply of 1/2 inch PVC drain Pipe Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
