|
| 1 | Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:3 (1 Cement : 3 Sand) First Class Bricks including entire carriage of material within all leads and lifts. |
| 2 | Providing and fixing 0.60mm.thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic, coating of 20 microns over 5 microns primer coating to back coat of polyester of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm. dia. metre with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge including entire carriage of material within all leads & lifts. (Tata make). |
| 3 | Providing and fixing Steel work welded in built up sections, trusses and framed work,including cutting, hoisting fixing in position and applying a priming coat of red lead paint including entire carriage of material within all leads & lifts.(Kamdhenu /Amba/Jai Bharat make) |
| 4 | In single Stanchions composed of rolled steel joists or channels with caps,bases splices,angles brackets etc. |
| 5 | In trusses and trussed purlins in building. |
| 6 | Providing and laying 15mm.cement plaster in single coat on rough side of brick/concrete/ stone walls for interior plastering including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm.in girth and finished even and smooth in cement mortar 1:6(1cement : 6sand) including entire carriage of material within all leads and lifts. |
| 7 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foregin matters With white enamel paint other than white (Nerolac/ Asian make 1st quality) including entire carriage of material within all leads and lifts. |
| 8 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm.so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 mtr. and removal of the same for insitu-reinforced concrete & plain concrete work including entire carriage of material within all leads & lifts. |
| 9 | Beam, cantilever, girders and lintels sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor. |
| 10 | Providing and laying cement concrete work 1:1.5:3 (1 cement :1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work by using mechanical mixture and vibrator including entire carriage of material within all leads & lifts. |
| 11 | Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level. |
| 12 | Providing mild steel/tor steel reinforcement for RCC work including bending, binding with binding wire and placing in position complete in all respect up to all floor level: tor steel including entire carriage of material within all leads & lifts. |
| 13 | Providing and fixing ridges or hips 60 cm overall with 0.60mm.thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm.dia. & prepainted G I limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in charges including entire carriage of material within all leads & lifts. (Tata make). |
| 14 | Providing and fixing MS BP sheet 2.00 mm thick in eaves board /fascia /soffits/ceiling including cutting, fixing and welding to steel roof members & applying a coat of red lead primer complete as per the instruction of Engineer –in- charge (Base members of steel work shall be measured & paid separately) including entire carriage of material within all leads & lifts. |
| 15 | Finishing wall with weather proof exterior grade emulsion of approved design (Apex) or its equalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including entire carriage of material within all leads and lifts. (Nerolac/Asian make 1st quality) Please Enable Macros to View BoQ information |
