Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavation in foundation, trenches etcetra in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths any quantum of water including slush which may arise during de-watering or removal of slush, lift upto any height stacking the excavated soil not more than 3 metres (Three metres) clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 2 | Excavation in Earth work and filling in 15cm. Layers in foundation and plinth including ramming watering and consolidating up to a lead of 20 metres and lift up to 1.50 metres.as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 3 | Providing and laying cement concrete 1:4:8 ( One Cement isto four Sand isto eight graded crushed stone aggregate 40 mm (forty milimetre) nominal size mechanically mixed and curing complete excluding the cost of form work. in foundation and plinth, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 4 | Providing form work with steel plates 3.15mm. (Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre ) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centering below supporting floor to ceiling for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation, footings bases of columns etc. for mass concrete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 5 | Providing form work with steel plates 3.15mm. (Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre ) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centering below supporting floor to ceiling for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Lintel, beam,plinth beam girder,bresumers and cantilevers etc. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 6 | Providing form work with steel plates 3.15mm.(Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm.,(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering, strutting and propping etcetra with wooden battens and ballies complete upto all heights/ depth of propping and centering below supporting floor to ceiling for all height and removal of the same for insitu- reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government |
| 7 | Providing form work with steel plates 3.15mm. (Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre ) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centering below supporting floor to ceiling for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, Pillars, Piers, Abutments, Posts and struts, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 8 | Providing form work with steel plates 3.15mm. (Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centering below supporting floor to ceiling for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in stair cases with slopping or stepped soffits excluding landing, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 9 | Providing form work with steel plates 3.15mm. (Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centering below supporting floor to ceiling for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surface with slopping or stepped soffits excluding landing, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 10 | Providing form work with steel plates 3.15mm. (Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centering below supporting floor to ceiling for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Edges of slab with slopping or stepped soffits excluding landing, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 11 | Providing and laying mechanically mixed and vibrated,concrete for plain cement concrete in open foundation of all type of structure complete,grade-M-20(M-twenty)nominal mix 1:2:4(One cement isto Four graded crushed stone aggregate 40mm (Forty milimetre) nominal size with cement contents not less than of 330(Three hundred thirty ) Kilogramme per cubic metre with 20mm(Twenty milimetre)nominal size graded crushed stone aggregate and curing ,for all heights/depths including the cost of form work and reinforcement for reinforced concrete work in foundation,footings,bases of columns and the like and mass concrete. as per drawings and MORD technical section 800,900,and 1200 and as per the direction of Engineer-in Charge.The rate is inclusive for carriage of materials within all leads,lifts and other incidentials.The rate including octroi,roylity, Malkhana, toll tax imposed by the Government. |
| 12 | Providing and laying mechanically mixed and vibrated,concrete for plain cement concrete in open foundation of all type of structure complete,grade-M-20(M-twenty)nominal mix 1:2:4(One cement isto Four graded crushed stone aggregate 40mm (Forty milimetre) nominal size with cement contents not less than of 330(Three hundred thirty ) Kilogramme per cubic metre with 20mm(Twenty milimetre)nominal size graded crushed stone aggregate and curing ,for all heights/depths including the cost of form work and reinforcement for reinforced concrete work in foundation,footings,bases of columns and the like and mass concrete. as per drawings and MORD technical section 800,900,and 1200 and as per the direction of Engineer-in Charge.The rate is inclusive for carriage of materials within all leads,lifts and other incidentials.The rate including octroi,roylity, Malkhana, toll tax imposed by the Government. |
| 13 | Providing and laying mechanically mixed and vibrated,concrete for plain cement concrete in open foundation of all type of structure complete,grade-M-20(M-twenty)nominal mix 1:2:4(One cement isto Four graded crushed stone aggregate 40mm (Forty milimetre) nominal size with cement contents not less than of 310(Three hundred Ten ) Kilogramme per cubic metre with 20mm(Twenty milimetre)nominal size graded crushed stone aggregate and curing ,for all heights/depths including the cost of form work and reinforcement for reinforced concrete work in Suspanded floor,roofs,landings shelves and their supports balconies, beams,girder, bressumers and cantilevers and the like and mass concrete. as per drawings and MORD technical section 800,900,and 1200 and as per the direction of Engineer-in Charge.The rate is inclusive for carriage of materials within all leads,lifts and other incidentials.The rate including octroi,roylity, Malkhana, toll tax imposed by the Government. |
| 14 | Providing and laying mechanically mixed and vibrated,concrete for plain cement concrete in open foundation of all type of structure complete,grade-M-20(M-twenty)nominal mix 1:2:4(One cement isto Four graded crushed stone aggregate 40mm (Forty milimetre) nominal size with cement contents not less than of 310(Three hundred Ten ) Kilogramme per cubic metre with 20mm(Twenty milimetre)nominal size graded crushed stone aggregate and curing ,for all heights/depths including the cost of form work and reinforcement for reinforced concrete work in Columns,pillars posts and struts above plinth level to floor to level and the like and mass concrete. as per drawings and MORD technical section 800,900,and 1200 and as per the direction of Engineer-in Charge.The rate is inclusive for carriage of materials within all leads,lifts and other incidentials.The rate including octroi,roylity, Malkhana, toll tax imposed by the Government. |
| 15 | Providing and laying mechanically mixed and vibrated,concrete for plain cement concrete in open foundation of all type of structure complete,grade-M-20(M-twenty)nominal mix 1:2:4(One cement isto Four graded crushed stone aggregate 40mm (Forty milimetre) nominal size with cement contents not less than of 310(Three hundred Ten ) Kilogramme per cubic metre with 20mm(Twenty milimetre)nominal size graded crushed stone aggregate and curing ,for all heights/depths including the cost of form work and reinforcement for reinforced concrete work in stair cases(except spiral stair case) excluding landing but including preparing of top surfaces and finishing of nousing up to all floor above plinth level the like and mass concrete. as per drawings and MORD technical section 800,900,and 1200 and as per the direction of Engineer-in Charge.The rate is inclusive for carriage of materials within all leads,lifts and other incidentials.The rate including octroi,roylity, Malkhana, toll tax imposed by the Government. |
| 16 | Providing and laying mechanically mixed and vibrated,concrete for plain cement concrete in open foundation of all type of structure complete,grade-M-20(M-twenty)nominal mix 1:2:4(One cement isto Four graded crushed stone aggregate 40mm (Forty milimetre) nominal size with cement contents not less than of 310(Three hundred Ten ) Kilogramme per cubic metre with 20mm(Twenty milimetre)nominal size graded crushed stone aggregate and curing ,for all heights/depths including the cost of form work and reinforcement for reinforced concrete work moulding as cornices window sills etc excluding 15 cm in grith. ) up to all floor above plinth level the like and mass concrete. as per drawings and MORD technical section 800,900,and 1200 and as per the direction of Engineer-in Charge.The rate is inclusive for carriage of materials within all leads,lifts and other incidentials.The rate including octroi,roylity, Malkhana, toll tax imposed by the Government. |
| 17 | Providing and laying Tor steel of TATA/ SAIL/TISCO reinforcement for Reinforced cement concrete work including cutting, straighting, bending, binding and placing in position, including cost of binding wire complete for all floor level, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government |
| 18 | Filling in Plinth with sand under floors including watering ramming consolidating and dressing complete, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 19 | Boulder filling dry hand packed tightly as in under floor The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. as per the direction of the Engineer -in-Charge including carriage of material with in all leads,lifts and other incidental.The rate including of octroi,royality,Malkhana, toll tax, GST or other taxes imposed by the government. |
| 20 | Providing and laying cement concrete 1:6:12 ( One Cement isto six Sand isto Tweleve graded crushed stone aggregate 40 mm (forty milimetre) nominal size mechanically mixed and curing complete excluding the cost of form work. in foundation and plinth, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 21 | Random rubble masonry with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (one cement is to six sand:12graded stone aggregate 20 mm nominal size in foundation and plinth) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 22 | Providing and laying Damp proof Course 38mm (Thirty Eight millimeter) thick with cement concrete 1:2:4 (one cement isto Two sand is to four graded stone aggregate 12.5 mm(Twelve decimal Five millimeter) nominal sixze machanically mixed and curing complete. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 23 | Applying a coat of hot bitumen(Mexphalt 80/100 (Eighty/Hundred)or equivalent using 1.70 kgs(One decimal seven Zero kilogrames)per square meter on Damp Proof Course after cleaning the surface with a pices of cloth lightly soaked in kerosene oil complete. as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government. |
| 24 | Second class Brick masonry work in common burnt clay building bricks in super structure above plinth level to floor any level in cement mortar 1:6 (One Cement is to Six Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 25 | Second class Half Brick masonry work in common burnt clay building bricks in super structure above plinth level to floor any level in cement mortar 1:4 (One Cement is to Four Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 26 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).second class deodar woodas per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 27 | Providing and fixing 12mm thick prelaminated board both side bwp phenol bounded exterior/interior grade pannalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screw 40mm thick frame. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 28 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in charge. (Note:- Butt hinges and necessary screws shall be paid separately)Second class Deodar wood 40 mm thick shutters as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 29 | Providing and fixing wire gauge shutters using galvanized M.S. wire gaugeI.S guage destignation 85 G with wire of dia 0.56 mm for doors windows and clearstorey windows including bright finished black enamelled iron hinges with necessary screw, 2nd class deodar woob 40 mm thick.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 30 | Providing and fixing panelling or penelling and glazing in panelled and glazed shutters for doors, windows and clearstorey windows(Area of opening for panel inserts excluding portion inside grooves or rebates to be measured)panellng for panelled or panelled and glazed shutters 25mm to 40mm thick 5.0mm thick glass panes (weight not less than12.5 kg per square metre.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 31 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 32 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings /wooden frames with rawl plugs screws etc.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 33 | Providing and fixing 1.0 mm thick powder -coated aluminiuum sheet (of approved colour/shade)in partitions,wall panelling, or cladding,including necessary adhesive, aluminium fasteners,and scaffolding (if required),complete in all respect..as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 34 | Providing and fixing 19mm thick HDMR (High- Density Moisture Resistant) Cup board with Shelves of approved make (e.g, Action Tesa, greenpanel,century ply.) All exposed edges are to be covered with 2mm thick PVC edge banding tape, Machine-pressed with hot melt glue.The vertical and horizential surface shall be finished with 1mm thick laminate, including all necessary hardware (hinges, drawer sliders, handles, catcher)and hardware-fixing, screwed,leveled and finished complete.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 35 | Providing and fixing 125mm (One hundred twenty five milimetres) size Stainless steel handles transparent or dyed to required colour and shade with necessary screws ISI marked, transparent or dyed to required colour or shade, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 36 | Providing and fixing 120mm (One hundred milimetres) size Stainless steel handles transparent or dyed to required colour and shade with necessary screws ISI marked, transparent or dyed to required colour or shade, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 37 | Providing and fixing heavy duty stainless steel door stoper, with necessary fittings and rubber cushion, including the cost of labor,tools and ancillary items, complete in all respects as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 38 | Providing and fixing 250x10mm (Two hundred Fifty into Ten milimetre) Size coloured anodized Stainless steel(SS) Tower bolts (Barrel type) with necessary screws etc. Complete, as per specification, ISI Markedtransparent or dyed to required colour or shade, with necessary screws etc. complete approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government |
| 39 | Providing and fixing 200x10mm (Two hundred into Ten milimetre) Size coloured anodized Stainless steel(SS) Tower bolts (Barrel type) with necessary screws etc. Complete, as per specification, ISI Markedtransparent or dyed to required colour or shade, with necessary screws etc. complete approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government |
| 40 | Providing and fixing 150x10mm (0nehundred into Ten milimetre) Size coloured anodized Stainless steel(SS) Tower bolts (Barrel type) with necessary screws etc. Complete, as per specification, ISI Markedtransparent or dyed to required colour or shade, with necessary screws etc. complete approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government |
| 41 | Providing and fixing 250x16mm (Two hundred fifty into Sixteen milimetres) size Stainless Steel(SS) sliding door bolts(aldrop) make dyed to required colour and shade with bolts and nuts necessary screws etcetra complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 42 | Providing and fixing 300x16mm (Three hundred into Sixteen milimetres) size Stainless Steel(SS) sliding door bolts(aldrop) make dyed to required colour and shade with bolts and nuts necessary screws etcetra complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government |
| 43 | Providing and fixing bright finished hard down stailess Steel (SS) Hooks and eyes 150mm (One hundred fifty milimetre), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 44 | Providing and fixing approved brand an manufacture SS 304 grade hydraulic door closer to doors, including all necessary fittings(screws, brackets,etc.)complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 45 | Providing and laying polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architrctural drawings with 18 mm thick stone over 20mm (everage)thick base of cement mortar 1:4(1cement :4 coarse sand)laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing,curing and polishing et. all complete as specified polished Granite ston slab Zed black,Cherry Red,cheema pink, elite brown, Cat Eye or Equivalent as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 46 | Providing and fixing 600x600x10mm (Six hundred into six hundred into Ten milimetre)vetrified full body matt finish vitrified tile size 60x60Cm of Rak/Bell charged vitrified tilesKajaria/ Somany / Nitco/ Jonson/Simpolo/ Rak in flooring, on a bed of 12mm (Twelve milimetre) thick cement mortar 1:4 (One cement isto Four sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 47 | Providing and fixing 600x600x10mm (Six hundred into six hundred into Ten milimetre)vetrified altra double charge/ Ultra charge vitrified tilesKajaria/ Somany / Nitco/Jonson/Simpolo/ Rak inSkirting,riser of steps,over 12mm thick bedof cment mortar jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 48 | Providing and laying 300X300 mm (three hundred into three hundred millimetre) aspartic Ceremic anty skid tile of NItico/AGL/Simplo/ Orient/RAK/Kajaria/Somany/Johnson/ Bell in flooring on 20mm twenty millimetre) IS:15622 thick cement mortar 1:4 (one cement isto four sand) laid over and jointed with neat cement slurry @3.3 kg/sqmfinished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads, lifts of materials and other incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government |
| 49 | Providing and laying 300X300 mm (three hundred into three hundred millimetre) aspartic Ceremic tile of NItico/AGL/Simplo/ Orient/RAK/Kajaria/Somany/Johnson/ Bell in skirting,riser of stepson 20mm twenty millimetre) IS:15622 thick cement mortar 1:4 (one cement isto four sand) laid over and jointed with neat cement slurry @3.3 kg/sqmfinished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads, lifts of materials and other incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government |
| 50 | Providing and fixing moulded hand rail of M.S. steel (Mild Steel)Rectengular Hollow pipe 50x25 mm(Fifty milimetre into Twenty five milimetres) Applo, Tata Kam Denu welded in straight length over M.S steel (Mild Steel)flat at top of vertical baluster including one coat of red oxide primer coat complete M.S (Mild Steel) flat & baluster of railing shall be measured and paid separately) as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 51 | Kota stone slab 20mm thick(single slab) in riser of steps,skirting,dado and pillars laid on 12mm (average)thick cement mortar 1:3 (1cement: 3coarse sand)and jointed with grey cement slurry mixed with pigment to match the shade of slabs,including rubbing and poilishing completeas per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 52 | Providing and fixing moulded hand rail of M.S. steel (Mild Steel)Rectengular Hollow pipe 50x25 mm(Fifty milimetre into Twenty five milimetres) Applo, Tata Kam Denu welded in straight length over M.S steel (Mild Steel)flat at top of vertical baluster including one coat of red oxide primer coat complete M.S (Mild Steel) flat & baluster of railing shall be measured and paid separately) as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 53 | Providing and fixing 85mm high railing having ballusters of 19mmx19mm and 12mmx12mm M.S.Solid square bars in combination with M.S flat of 40x5mm sie with baluster duly welded/jointing with electric gas welding with top M.S fla tApplo, Tata Kam Denu steel as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 54 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete make Applo,TATA, Kam Denu or its equvalentas per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 55 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing TATA with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 56 | Providing and fixing Ridge or hips 0.60mm thick prepainted steel sheet in roofing TATA with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 57 | Providing and fixing valley 90cm overall 0.60mm thick prepainted steel sheet TATA/duro Shine in with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge. |
| 58 | Providing and fixing 30 cm wide,90 cm overall semi-circular plain G.S sheet gutter with iron brackets 40x3 mm size,bolts nuts and washers etc,inclding making necessary connections with rain water pipes complete 0.80 mm thick with zink coating not less than275 gm/m2 as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 59 | providing and fixing M.S. B.P. sheet 1.66 mm to 2mm thick in eves board/facia/soffits/ceiling including cuttin ,fixing and welding to steel roof members and applying a coat of red lead primer complete(Base member of steel work shall be measured & paid separtely) as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 60 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382 leavig 10mm gap for thermal expension( i) Single soaketed pipes 110mm P.V.C. (Poly Venyl Chloride) Supreme/Reliance/Finolex/Vectus/Astral D-plast double equal branch of required degree including fixing with approved adhesive etcetra complete, as per specification, approved drawing, design, including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government |
| 61 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs,screwed with M.S screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1cement:4 coarse sand) and making good the wall etc complete-110mm Supreme/Reliance/Finolex/Vectus/Astral D-plast double equal branch of required degree including fixing with approved adhesive etcetra complete, as per specification, approved drawing, design, including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government |
| 62 | Providing and fixingon wall face unplastiised- pvc moulded fittings/accessories for unplasticised Rigid PVC rain water pipe conforming to IS:13952 Typ-A including jointing with seal ring conforming to IS:5382.leaving 10mm gap for thermal expension copular 110mmSupreme/Reliance/Finolex/Vectus/Astral /Deplastas per specification, approved drawing, design, including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government |
| 63 | Providing and fixingon wall face unplastiised- pvc moulded fittings/accessories for unplasticised Rigid PVC rain water pipe conforming to IS:13952 Typ-A including jointing with seal ring conforming to IS:5382.leaving 10mm gap for thermal expension Bend 87.5 degree 110 mmSupreme/Reliance/Finolex/Vectus/Astral /Deplastas per specification, approved drawing, design, including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government |
| 64 | Providing and fixingon wall face unplastiised- pvc moulded fittings/accessories for unplasticised Rigid PVC rain water pipe conforming to IS:13952 Typ-A including jointing with seal ring conforming to IS:5382.leaving 10mm gap for thermal expension Shoe Plain 110 mm Supreme/Reliance/Finolex/Vectus/Astral /Deplastas per specification, approved drawing, design, including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government |
| 65 | 15 mm (Fifteen milimetre) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering up to all floor level including arises, internal angles, chamfers and rounded angles any girth and finished even and smooth with cement mortar 1:6 (One cement isto Six sand), as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 66 | 15 mm (Fifteen milimetre) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering up to all floor level including arises, internal angles, chamfers and rounded angles any girth and finished even and smooth with cement mortar 1:6 (One cement isto Six sand), as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 67 | 6mm (Six millimetres) thick cement plaster to ceiling with cement mortar 1:4 (One cement isto Four Sand) upto all floors level complete, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government. |
| 68 | Providing and fixing unistone12mm (twelve millimeter) thick cladding on walls/ reinforced cement concrete surface outside as on faces of arch masonary walls etc on 12 mm (Twelve millimetres) thick cement plaster 1:3(one ement: three sand) and jointed with cement slurry including scaffolding etc. complete as per architectural drawing, design and specifications as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 69 | Applying Birla J.k. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dirt, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government. |
| 70 | Applying one coat of water thinable cement primer of Asian paint/ Dulex paint/ Burger Paint on new concrete/ masonry/ plasterede surfaces after and including preparing the surface by thoroughly bruhsing the surface free from mortar dropping and other foreign matters sand papering the surface smooth complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government. |
| 71 | Applying priming coat over new wood and wood based surfaceswith Nerolac/Asian /Burgeror its equivalent after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting with Ready mixed paint brushing wood primer pink . as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government. |
| 72 | Wall painting (two coats) with acrylic colour emulsion paint of Asian paint/ Dulex paint/ Burger/ Nerolac Paint manufacture of approved shade for interior grade on undecorated concrete/ stone/ plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 73 | Painting two coats (excluding priming coat) Deluxe Multi Surface paint on new wood and wood based surfaces with enamel paint of Asian/Nerolac/Burger of approved shade brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax, GST or any other taxes imposed by the Government |
| 74 | Painting steel work with delux multi surface paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax, GST or any other taxes imposed by the Government |
| 75 | Providing and fixing 18mm thick,150mm vide pelmet of coir veneer board ISI marked IS:14842,including top cover of 6 mm coir vaneer board nickle plated M.S. pipe 20mm Dia (heavy type) curtain rod with nickel plated brackets,including fixing with 25x3mmM.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100mmx40mmx40mm on both inner side of pelmet and rawl plugs 75 mmlong etc.all complete.as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax, GST or any other taxes imposed by the Government |
| 76 | Making plinth protection 50 mm thick of cement concrete 1:3:6(1cement:3coarse sand (Zone-III):6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick balast 40 mm nominal size,well rammed and consolidated and grouted with fine sand including necessary excavation, levelling & finishing the top smooth.as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax, GST or any other taxes imposed by the Government |
| 77 | Construction of cement concrete covered drain in cement concrete 1:3:6 (One cement isto six graded stone aggregate 20mm (twenty millimetre) nominal size including earth work shuttering and cast in situ RCC slab over drain and cement concrete flooring 1:2:4(One cement:istoTwo sand isto Four graded stone aggregate) and finished with a floating coat of neat ement complete as per standard design.as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax, GST or any other taxes imposed by the Government |
| 78 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in- charge. as per standard design.as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax, GST or any other taxes imposed by the Governmen |
| 79 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications clause 802,803,1202 & 1203 P.C.C.grade M-20 Nominal mix (1:2:4) complete.as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax, GST or any other taxes imposed by the Government |
| 80 | Providing and fixing water closet squating pan(Indian type W.C.pan) with 100 mm sand cast iron P ot S trap,10 litre low level white P.V.C. flushing Cistern including flush pipe, Manually controlled device (handle lever)conforming to IS:7231, with all fittings and fixture complete,including cutting and making good the walls and floors wherever required:White vitrous china Orrissa patteren W.C. pan of size 580x440 mm with integral type foot rest. Hind Ware Cera /Somany /Jaquar and its other Eqivlant as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 81 | Providing and fixing white viterous china pedestial tpye water closet MATRIX EWC with jet pressure ( European type) with Jet pressure and ,10 (ten) litre low level PVC dual flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm (Forty milimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required of HINDWARE /CERA/JAQUAR of Stat white/Snow white shade including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government. |
| 82 | Providing and fixing 8mm dia C.P./S.S jet with flexible tube up to 1.00 metre long with S.S triangular plate to Eureopean type W.C of quailty and make as approved by Engineer-in-Charge. as per architectural drawing, design and specifications as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 83 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white Vitreous China Flat back wash basinsize 550x 400 mm with single 15 mm C.P.brass pillar tap as per direction of the engineer in charge, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 84 | Providing and fixing white viterous china pedestial for wash basin completely recessed at the back for the reception of pipe and fittingsas per direction of the engineer in charge, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 85 | Providing and fixing 32mm dia (Thirty two milimetres) diametres P.V.C. (Poly Venyl Chloride) waste pipe Supreme of Finolex/ Reliance and Vectas for wash basin or sink including brass check nut complete including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government. |
| 86 | Providing and fixing 453x357 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm (Six milimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government. |
| 87 | Providing and fixing in trenches high pressure 150 mm (one hundered fifty milimetre)diametre conformng to BS NO.13592-92 (Thirteen thousand five hundred ninety two Ninety two)PVC (Poly Venyl Cnioride) Diplast pipe class B soil , waste and ventialing pipes fixing with adhesive mixture complete of supreme/Kishan/Astral/Finolex. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 88 | Providing and fixing in trenches high pressure 110 mm (one hundered Ten milimetre)diametre conformng to BS NO.13592-92 (Thirteen thousand five hundred ninety two Ninety two)PVC (Poly Venyl Cnioride) Diplast pipe class B soil , waste and ventialing pipes fixing with adhesive mixture complete of supreme/Kishan/Astral/Finolex. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 89 | Providing and fixing in trenches high pressure 75 mm (seventy five milimetre)diametre conformng to BS NO.13592-92 (Thirteen thousand five hundred ninety two Ninety two)PVC (Poly Venyl Cnioride) Diplast pipe class B soil , waste and ventialing pipes fixing with adhesive mixture complete of supreme/Kishan/Astral/Finolex. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 90 | Providing and fixing 110 mm (one hundered Ten milimetre)diametre (confirming to I.S.no.14735-99 (Fourteen thousand seven hundred thirty five-ninety nine)P.V.C.(poly venyl chloride)Tees supreme/Kishan/Astral/Finolex. Prince pipe medium class, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 91 | Providing and fixing75mm (Seventy Five milimetre)diametre (confirming to I.S.no.14735-99 (Fourteen thousand seven hundred thirty five-ninety nine)P.V.C.(poly venyl chloride)Tees supreme/Kishan/Astral/Finolex. Prince pipe medium class, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 92 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs,screwed with M.S screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1cement:4 coarse sand) and making good the wall etc complete- 75 mm Supreme/Reliance/Finolex/Vectus/Astral fixing with approved adhesive etcetra complete, as per specification, approved drawing, design, including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government |
| 93 | Providing and fixing 110 mm (Seventy five milimetre) diametre P.V.C (poly venyl chloride) Supreme/ Finolex/Prince pipe fitting and accessories single for sewerage pipe confirm to IS No. 14735-99 (Fourteen thousand seven hundred thirty five -Ninety nine)Plain bend complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 94 | Providing and fixing 75 mm (one hundred ten milimetre) diametre P.V.C (poly venyl chloride) Supreme/ Finolex/Prince pipe fitting and accessories single for sewerage pipe confirm to IS No. 14735-99 (Fourteen thousand seven hundred thirty five -Ninety nine)Plain bend complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 95 | Providing and fixing 110 mm (One hundred Ten milimetre) diametre P.V.C (poly venyl chloride) Supreme/ Finolex/Prince pipe heel rest bend confirming to IS No. 14735-99 (Fourteen thousand seven hundred thirty five -Ninety nine)Plain bend complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 96 | Providing and fixing 75 mm (Seventy five milimetre) diametre P.V.C (poly venyl chloride) Supreme/ Finolex/Prince pipe heel rest bend confirming to IS No. 14735-99 (Fourteen thousand seven hundred thirty five -Ninety nine)Plain bend complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 97 | Providing and fixing 110 mm (One hundred ten milimetre ) diametre P.V.C (poly venyl chloride) Supreme/ Finolex/Prince pipe Collar confirming to IS No. 14735-99 (Fourteen thousand seven hundred thirty five -Ninety nine complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 98 | Providing and fixing 75 mm (Seventy Five milimetre ) diametre P.V.C (poly venyl chloride) Supreme/ Finolex/Prince pipe Collar confirming to IS No. 14735-99 (Fourteen thousand seven hundred thirty five -Ninety nine complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 99 | Providing and fixing 110 mm (One hundred ten milimetre ) diametre P.V.C (poly venyl chloride) Supreme/ Finolex/Prince pipe Cowl confirming to IS No. 14735-99 (Fourteen thousand seven hundred thirty five -Ninety nine ) complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 100 | Providing and fixing 75 mm (Seventy Five milimetre ) diametre P.V.C (poly venyl chloride) Supreme/ Finolex/Prince pipe Cowl confirming to IS No. 14735-99 (Fourteen thousand seven hundred thirty five -Ninety nine ) complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 101 | Providing and fixing 110x75 mm(One hundred ten into seventy five milimetre) nominal size/diametre P.V.C. (poly venyl chloride)Sopreme/finolex/astral/ prince Floor trap ISI marked of self cleaning design including fillinf the joints with approved adhesive cost of cutting and making good the walls and floors etcetera complete.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 102 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :610x510 mm bowl depth 200 mm as per direction of the engineer in charge, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 103 | Providing and fixing 100mm dia (one hundred milimetre) diametres C.P.(Chromium Plated) Grating of Paryag/Hindware/cera for gully floor or Nahni trap, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 104 | Providing and fixing flat back 600x20mm (Six hundred into twenty milimetres) Towel rail of complete fitting Prayag/ Hindware/Cera I.S. marked complete with C.P. (Chromium Plated) brass brackets fixed to wooden plugs with Chromium Plated brass screws, as per specification, approved drawing, design including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government. |
| 105 | Providing and fixing C.P. towel ring trapezodial shape 215mm long,200mm wige with minimum distances of 37mm from wall face with concealed fittings arrangement of approved quailty and colour, weighing not less than 88 gms.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 106 | Providng and fixing Glass Self with C.P.(Chromium Plated)brass 600x120 mm (Six hundred into one hundred twenty milimetre)of prayag/Hindware /cera brackets and guard rail complete,fixed to wooden plugs with C.p.(Chromium plated)Brass screws.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 107 | Providing and fixing C.P.(Chromium Plated)brass toilet paper holder of prayag/Hindware /cera brackets and guard rail complete,as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 108 | Providing and fixing 15mm dia (fifteen milimetre) diametre C.P.(Chromium Plated)brass of prayag/Hindware /cera bib tap No.12 (Tweleve) with capstan head complete,as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 109 | Providing and fixing wall-mounted/table-monted C.P brass sink mixer of approved make and brand,with a swinging casted spout of requre size, including fixing with C.P brass flange.connecting pipes, and testing the joints complete,as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 110 | Providing and fixing 15mmdai (fifteen milimetre)diametre of C.P.(Chromium Plated)brass stop cock (concealed) of prayag/Hindware /cera as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 111 | Providing and fixing 15mm dia (fifteen milimetre) diametre C.P.(Chromium Plated)brass angle valve without nuts and pipe of prayag/Hindware /cera complete,as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 112 | Providing and fixing C.P.(Chromium Plated) brass full way valve with wheel 15mm (Fifteen milimetre) nominal bore.as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 113 | Providing and fixing 15mm (fifteen milimetre) nominal bore P.V.C.(Poly Venyl Chloride) connection pipe with brass union 45cmm (Forty five milimetres) length complete,as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 114 | Providing and fixing 15mm (fifteen milimetre) nominal bore P.V.C.(Poly Venyl Chloride) connection pipe with brass union 45cmm (Forty five milimetres) length complete,as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 115 | Providing and fixing C.P.Brass shower rose with 15or 20 mm inlet 100mm diametreas per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 116 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes , having thermal stability for hot &cold water supply, including all CPVC plain & brass threated fittings, i/c fixing the pipe with clamps at 1.00 metre spacing. This includes jointing of pipes & fittings with one steps CPVC solvent cement and the cost of cutting chases and makeing good the same including testing of joints complete Concealed work,including cutting chases and making good the walls etc. 15mm nominal outer dia pipes internal work)as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 117 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes , having thermal stability for hot &cold water supply, including all CPVC plain & brass threated fittings, i/c fixing the pipe with clamps at 1.00 metre spacing. This includes jointing of pipes & fittings with one steps CPVC solvent cement and the cost of cutting chases and makeing good the same including testing of joints complete Concealed work,including cutting chases and making good the walls etc. 20mm nominal outer dia pipes internal work)as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 118 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes , having thermal stability for hot &cold water supply, including all CPVC plain & brass threated fittings, i/c fixing the pipe with clamps at 1.00 metre spacing. This includes jointing of pipes & fittings with one steps CPVC solvent cement and the cost of cutting chases and makeing good the same including testing of joints complete Concealed work,including cutting chases and making good the walls etc. 15mm nominal outer dia pipes internal work)as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 119 | Providing and fixing ball valve(Brass) of approved quaility,High or Loe pressuure, with plastic floats complete 15mm nominal bore as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 120 | Providing and fixing water tank make P.V.C. (Poly Venyl Chloride) SINTEX Finolex/Relpipe (Reliance)/ Vectus with tripple layer having capacity of 1000 ( One thousand ) litres each tank ISI 12701 (Twelve thousand seven hundred one) G.I. (Galvanised Iron) necessary fittings including over flow pipe scour pipe etectera for inlet and outlet and inside connection 15mm (Fifteen milimetre) nominal bore ball valve and P.V.C. (Poly Venyl Chloride) cover with locking arrangements including placing with all height above ground level complete in all respect and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 121 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 122 | Providing and fixing C.P.Soap Dish Holder having length of 138 mm, breadth 102 mm, height of75 mm with concealed fittings arrangements, weighing not less than 106 gms.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 123 | Construction of brick masonary manhole in cement mortar 1:4(1 cement :4 coarse sand) with RCC (reinforced cementconcrete) top slab in 1:1:5:3 mix in (One Cement: one point fiveSand: Three graded crushed stone aggregate 20mm (Twenty milimetre) nominal size), foundation concrete 1:4:8 (One Cement: Four Sand: eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size, inside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One Cement: Three Sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ((One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) finished smooth complete including curing and testing Inside size 900mmx800mm (Nine hundred milimetre into Nine hundred milimetre) and 800(Eight hundred milimetre) deep including C.I. (Cast Iron) cover with frame, (Light duty single seal pattern –I) 455mmx610mm (Four hundred fifty five into Six hundred ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15kg (Ffteen kilogram)with common brunt clay F.P.S (on modular)bricks of class destignation 7.5 masonry in cement mortar 1:3 (One Cement: Three Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 124 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay building bricks in cemetn mortar 1:5 (One cement isto Five sand) precast cement concrete cover (medium duty) R.C.C. top slab with 1:2:4 mix (One cement isto Two sand isto Four graded stone aggregte 20mm (Twenty milimetre) nominal size) foundation concrete 1:5:10 (One cement isto Five sand isto Ten graded stone aggregate 40mm (Forty milimetre) nominal size) inside plaster 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One cement isto Three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete inside diamensions 455mm x 610mm x 450mm (Four hundred fifty five into Six hundred ten into Four hundred fifty milimetre) deep single pipe line. as per specification, approved drawing, design Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
