Tender For Cutting In Earth Work And Disposal Of Excavated Earth Upto A Leads Of 20 Metres Complete In All Respect With In All Leads And Lifts As Per Direction And Complete Satisfaction Of Engineer-In-Charge. , Providing And Laying Cement Concrete 1:, Jawali-Himachal Pradesh
TDR : 55180661
Tender Notice
BOQ
6 Days Left
Jawali
Himachal Pradesh
Tender For Cutting In Earth Work And Disposal Of Excavated Earth Upto A Leads Of 20 Metres Complete In All Respect With In All Leads And Lifts As Per Direction And Complete Satisfaction Of Engineer-In-Charge. , Providing And Laying Cement Concrete 1:
Cutting in earth work and disposal of excavated earth upto a leads of 20 metres complete in all respect with in all leads and lifts as per direction and complete satisfaction of Engineer-in-charge.
2
Providing and laying cement concrete 1:6:12 (1 cement:6 sand:12 graded stone agg. 40mm nominal size and curing compelte excluidng the cost of form work foundation and plinth.
3
Excavation in foundation and trenches etc. in all kind of soil such as pick work ,jumper work blasting soft/hard rock by chiseling where the blasting work is prohibited slushy, daldal and saturated soil including pum pumping or bailing out water with in all heights stacking the excavated soil with in all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15 cms, layers when required into plinths sides of foundation consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth complete in all respect with in all lead and lifts as per direction & satisfaction of Engineer - in - charge.
4
Dismentaling of Galvanised mild steel tube (LG) incluidng fiting (earth work in trenches to be measured and paid separately) as per direction and satisfaction of Engineer-in-charge of the following nominal bore.
5
GI pipe 50mm dia
6
GI pipe 40mm dia
7
GI pipe 32mm dia
8
GI pipe 25mm dia
9
Relaying, Jointing and testing of Galvanised mild steel tube (LG) incluidng fiting (earth work in trenches to be measured and paid separately) as per direction and satisfaction of Engineer-in-charge of the following nominal bore.
10
GI pipe 50mm dia
11
GI pipe 40mm dia
12
GI pipe 32mm dia
13
GI pipe 25mm dia
14
Laying,, Jointing and testing of Galvanised mild steel tube (LG) incluidng fiting (earth work in trenches to be measured and paid separately) as per direction and satisfaction of Engineer-in-charge of the following nominal bore.
15
GI pipe 50mm dia
16
GI pipe 40mm dia
17
GI pipe 32mm dia
18
GI pipe 25mm dia
19
Providing and fixnig G.I. Sockets heavy duty ISI marked complete fixing at site compelte in all respect within all leads and lifts as per direction and satisfaction of Engineer-in-charge.
20
50mm Dia
21
40mm Dia
22
32mm Dia
23
Providing and fixnig G.I. Unions heavy duty ISI marked complete fixing at site compelte in all respect within all leads and lifts as per direction and satisfaction of Engineer-in-charge.
24
50mm dia
25
40mm dia
26
32mm dia
27
Providing and fixing of Bir/Kartar make Cast iron Double flanged sluice valve of class ASA 150 as per relavant Is standards with stand nominal seat pressure 20.00 KG/Cm Sqr. Conforming to IS BS:1868/API-600 (latest with up to date amendments of any complete in all respects with in all leads and lifts as per direction and satisfaction of Engineer-in-charge having following nominal dimeters.
28
50mm dia
29
Providing electric welding (Triple layer) at site with diesel Engine Generator welding set required for repair of various dia. G.I. Pipes at different RD's to stop the leakage problem including cost of carriage of Generator set at site with in all leads and lifts and as per entire satisfaction of Engineer-in-charge.
30
80mm dia
31
50mm dia
32
40mm dia
33
32mm dia
34
Providing and Laying in trenches to be levelled to Grade, BIS marked G.I. pipes conforming to BIS:1239 (latest with upto date ammendments) of 150mm dia to (Medium Class) duly flanged after 66 Mtr. interval of pipe with intermediate butt welded joints including the cost of flanges, bends/short pieces made from parent tubes of different degrees cuting welding and jointing with flanges conforming to table as specified below of parent tubes of different degrees cuting, welding & jointing with flanges conformaing to table as specified below of B IS:6392 (latest with up date ammendments) welded at both ends as per BIS: 816 (latest with up date ammendments) with electrodes conforming to BIS 814 (latest with up date ammendments) & provided with nuts & bolts BIS 1369 (latest with up date ammendments) of required sizes, 4mm thick (Champion make) compressed asbestos fiber gasket or synthetic rubber gaskets conforming to BIS 2712 (latest with up date ammendments) & approved specification as per site conditions inclduing flushing, cleaning and hydraulic testing complete to respect with in all leads and lifts and as per direction and satisfaction of the Engineer-in-charge.
35
Providing and fixing of C.I. double flanged sluice valve of Kirloskar Kilburn/IVC/Fouress/Gled /BHEL/leader/Kartar make of size equal to dia of Rising Main of 150mm dia. & class-PN-1.6 rising spindle type and capable of with standing nominal seat pressure of 10 Kg/cm^² compelte in all respect i/c cost of tees, bends tapers & any other fittings required as per site conditions within all leads and lifts & as per direction of Engineer-in-charge NOTE:- the C.I. Sluice valve shall conform to BIS 780-1984 (latest edition) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
