|
| 1 | CIVIL WORK: Removing old lime or cement plaster from walls including raking out joint 12mm deep and removing the debris from site with all leads as directed by the Engineer-in-charge including all labour and T&P. required for the work etc. complete |
| 2 | Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5 metre lift and stacking the soil upto a lead of 100 metre and including dewatering, removing slush,shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge. |
| 3 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only). |
| 4 | Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge. |
| 5 | Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland slag cement (PSC) with 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge. |
| 6 | Plain cement concrete (1:2:4) nominal mix in foundation as per Drawing and Technical Specification |
| 7 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. |
| 8 | Plinth Beam |
| 9 | Column in Supersructure |
| 10 | RCC Lintel |
| 11 | RCC Chajja |
| 12 | Roof Beam |
| 13 | Roof Slab |
| 14 | Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding (Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-in-charge Cold Twisted bars, Thermo-Mechanically-treated bars. |
| 15 | First class Fly ash Brick masonry using bricks of size 23cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. at all floors and all heights. |
| 16 | First class Fly ash Brick masonry using bricks of size 23cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. at all floors and all heights. |
| 17 | Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including work cutting, hoisting,fixing in position and applying apriming coat of approved steel primer, two or more coats of synthetic enamel paint with approved make and brand in grating, frames, guard bar, ladder, railings for balconies and straircase, brackets, gates and similar works as per direction of Engineer-In-Charge |
| 18 | Supplying and fixing Colour G.C.I sheeet on roof drilling hole in wind ties including fixing of ridges valley wind ties etc excluding cost of fittings per 1 sqm. |
| 19 | 12mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 20 | 16mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 21 | Supplying, fitting & fixing of Vitrified colour printed series tiles in floors of size 600mmx 600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only ) |
| 22 | Supplying, fitting & fixing of Vitrified colour printed series tiles in dadoes, skirting and risers of steps of size 600mmx 600mm of approved make confirming to IS:13755 laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 23 | Supplying, fitting & fixing of CeramicTiles of minimum 16mm thick and above 0.10 sqm of approved make in floors over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect.(Data for 10 Sqm ) |
| 24 | Supplying, fitting & fixing of Ceramic Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes, skirting and risers of nsteps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 25 | Supplying Fitting, fixing Two Track UPVC Sliding framed window of approved make with 6mm thick glass of approved quality complete with frame shutters and all fitting and fixtures complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 26 | Supplying Fitting, and fixing of openable UPVC Doors with Door frame of approved make with 6mm thick glass of approved quality complete with frame shutters and all fitting and fixtures complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 27 | Providing & Applying priming one coat with water based Cement primer of approved brand and manufacture on plastered surface including cost, conveyance, loading and unloading and taxes of all materials, cost of all labour, required for the work and complete in all respect as per specification and direction of Engineer-in-charge. |
| 28 | Wall Painting two coats with approved Plastic Emulsion Paint in Ground Floor and manufacture on plastered surface including cost, conveyance, loading and unloading and taxes of all materials, cost of all labour, . required for the work and complete in all respect as per specification and direction of Engineer-in-charge. |
| 29 | Painting two coats with any approved colour of weather seal coat to out side surface of wall in Ground Floor and manufacture on plastered surface including cost, conveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge. |
| 30 | Painting two coats with approved Enamel Paint on Steel surface over a coat of Red Oxide Primer in Ground Floor all materials, cost of all labour,. required for the work and complete in all respect as per specification and direction of Engineer-in-charge. |
| 31 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform a |
| 32 | EI WORK: Recessed wiring to Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non metalic PVC flexible conduit with 5/6A 250 volt Modular type switch,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 FRLSH pvc insulated Single Core multistrand copper conductor as earth wire Including all accessories and connection as per direction of Engineer-in-charge. (Make of wire:- Finolex/Anchor/ Havells/ Polycab/KEI/ V.Guard & Make of Switch/Socket:-legrand (Myrius-Next gen)/Schneider(Zencelo)/ Panasonic (vision)/ Havells (Crabtree)a) Group-A |
| 33 | b) Group-B |
| 34 | c) Group-C |
| 35 | Recessed wiring to 5/6A socket outlet with 2x1.5mm2 PVC Insulated S.C FRLSH multistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with Modular type switch.a) Group-A (On Extension) |
| 36 | b) On existing board |
| 37 | Recessed wiring to power plug point with 2x4mm2 PVC Insulated S.C FRLSH multistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with 1x2.5mm2 FRLSH PVC insulated S.C Cu. wire for loop earthing as required.(Make of wire:-Finolex/ Anchor/Havells/ Polycab/KEI/ V.Guard ) |
| 38 | Wiring to Circuit/ Sub-main along with earth wire with following size of FRLSH PVC S.C.Cu. Wire (Make of wire:- Finolex/ Anchor/ Havells/Polycab/ V.Guard/KEI)a) 1 x 1.5mm2 Submain for Invertor wiring |
| 39 | b) (1.8.1) 2X1.5mm2 + 1x1.5mm2 |
| 40 | c) (1.8.2) 2X2.5mm2 + 1x1.5mm2 |
| 41 | d) (1.8.4) 2X6mm2 + 1x2.5mm2 |
| 42 | e) (1.8.5) 2X10mm2 + 1x4mm2 |
| 43 | S/F of Extension board consisting of 3 Nosmodular 6Amp Switch with 3 Nos 6Amp modular Socket of Legrand/Havells/ Hager/ Schneider/any equivalent ISI make including all accessories and connections. |
| 44 | S/F of step type electronic modular fan regulator of Havells/Legrand/Schnider/Hager make . |
| 45 | S/F of 1200mm Energy Efficient High Speed Ac Ceilling Fan of make & model:- Usha Racer Chrome/Bajaj Edge HS Deco Plus/Crompton Diego/Havells Ambrose ES/Equivalent without Regulator as per direction of engineer in charge. |
| 46 | S/F of 22 watt LED Tube Light fitting of Philips/Bajaj/Havells/HPL make. |
| 47 | S/F of Modular Angle Holder of any ISI make. |
| 48 | S/F of 9watt LED Bulb of Havells/Bajaj/Philips/ HPL make. |
| 49 | S/F of 18watt Surface mounted LED down light complete of Havells/ Bajaj/Philips/any equivalent ISI make. |
| 50 | S/F of 300mm Exhaust Fan of make & model:- Usha turbo jet/Bajaj freshee/Havells/V-Guard make. |
| 51 | S/F of 12 way double door Distribution Box with 1x40 Amp DP MCB of C'series + 10x6Amp SP MCB of B'series as per direction of engineer in-charge. (DB & MCB of make:- Schnider/ Hager/ Legrand/L&T/Havells) |
| 52 | S/F of 4-Way double door MCB distribution box with 2 Nos of 40 Amp DP MCB of Havells/HPL/ L&T/Legrand/any equivalent ISI make. |
| 53 | S/F of Special Earthing complete with provision of600x600x3.15mm thick copper plate along with25x5mm copper strip in 40mm dia GI pipeincluding soldering of strip if necessary andproviding masonary enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal and salt as required. |
| 54 | S/L of SWG No.6 Copper Earthing wire of any ISI make for running of Earth continuity from Earth pit to Main Switch. |
| 55 | S/F 3&1/2 core x 25 mm2 PVC Alluminium Armoured Cable of ISI Marked (Polycab/KEI/ Havells make). |
| 56 | Laying of cable on wall surface by clamping. |
| 57 | S/F of 32Amp DP Switch of any ISI make. |
| 58 | S/F of 63 Amp TPN Main Switch of Havells/ Crompton/Anchor/HPL/Any equivalent ISI make. |
| 59 | S/F of 63 Amp TPN Copper Busbar in sutable enclosure box of Havells/ Crompton/ Anchor/ HPL/Any equivalent ISI make. |
| 60 | S/F of 90wt LED Street light of Havells/HPL/Bajajmake. |
| 61 | Supply and Fixing of GI bend pipe for street light including all accessories i.e clamp or jam lock etc. |
| 62 | S/F of 2450VA UPS (Invertor) of Microtek/ Luminous make. |
| 63 | S/F of 12Volt 200Ah battery for Invertor of Exide/ Luminous/Microtek make. |
| 64 | PH WORK: Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.20mm dia P.V.C.ASTM(Sch.-80)Pipes |
| 65 | 25mm dia P.V.C.ASTM(Sch.-80)Pipes |
| 66 | 32mm dia P.V.C.ASTM(Sch.-80)Pipes |
| 67 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 68 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 69 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 70 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 71 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 72 | 25mm dia brass full way valve (Shakti make) |
| 73 | 32mm dia brass full way valve (Shakti make) |
| 74 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 75 | 15mm CP Extension piece |
| 76 | 125mm CP grating |
| 77 | 15mm size C.P. flange |
| 78 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 1000 liters capacity PVC water storage tank |
| 79 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 80 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 81 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 82 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Supreme /Ashirvad) |
| 83 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 84 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 85 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 86 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 87 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 88 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 89 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 90 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 91 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 92 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 93 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargeEuropean water closet with 'p' trap plain(Hindware/Parryware/Neycer make) |
| 94 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-chargeHalfpedestal basin(560x450)Hindware No.91049+91115 |
| 95 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail |
| 96 | Towel ring |
| 97 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf with CP/NP guard rails. |
| 98 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.Large Size mirror with Frame (5x0.90x0.75)= |
| 99 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder |
| 100 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.½ inch x 5 inch CP Shower (Plaza Deluxe Make) |
| 101 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 102 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 103 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18inch dia RCC MH cover |
| 104 | Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge |
| 105 | Fitting & fixing of Aquagurad Cooler Cum Purifier for drinking water privision. 1noCost of Aquaguard Cooler - Cum Purifier |
| 106 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge150mm dia P.V.C. pipe |
| 107 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) |
| 108 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 109 | 1 no 10 Users Septic tankEarth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 110 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. |
| 111 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 112 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 113 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 114 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 115 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 116 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-chargeRCC floor, roof slab chhaja up to 4.430 m height |
| 117 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 118 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 119 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge |
| 120 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. |
| 121 | Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. Please Enable Macros to View BoQ information |
