|
| 1 | Demolition of un-reinforced cement concrete in roofs, floors (other than ground floors), beams, staircase, landing, chajjas and similar suspended work and pavings not exceeding 15cm thickness (below or above ground level), complete all as specified and directed. |
| 2 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in sub base of flooring and roof treatment, complete all as specified and directed. |
| 3 | Providing and laying water proofing treatment to sunken portion of WCs, bathrooms, roof etc by applying two coats of slurry of cement @ 0.488 kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 kg/Sqm. This layer allowed to air cure for 4 hrs then applying slurry of cement @ 0.242 kg/sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm and allowed to aircure for 4 hrs and joints seal with sealing compound as approved by GE. Note: (i) Before laying of cement concrete joints of trap/WC/Soil pipes shall be properly sealed with sealing compound of Roofex/Forre/FOSROC and provn of P or S trap & Nahani /Floor traps with long arm and also provn of spout of 40mm dia. |
| 4 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar in 1:3, finishing even & smooth w/o using extra cement, complete all as specified and as directed. |
| 5 | M&L for cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregates) as in filling, sunken portion treatment, complete all as specified and directed. |
| 6 | M&L for 20mm thick cement plaster on fair face of concrete surface including repair of doubing roof/ chajja/ facia surfaces in CM 1:3, finished even and smooth without using extra cement, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately. |
| 7 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 8 | M&L for brick work with sub class ‘B’, old size bricks, straight or curved on plan exc 6 mtr mean radius, built in CM 1:6, complete all as specified and directed. |
| 9 | All as per serial item No. 8.00 here-in-above but except bricks. |
| 10 | M&L for half brick work with sub class 'B' brick, old size, straight or curved on plan exc 6 mtr mean radius, built in CM 1:4, complete all as specified and directed. |
| 11 | Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed. |
| 12 | Taking up or down 20/25mm bore steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed. |
| 13 | Taking up or down 40mm bore steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed. |
| 14 | S&F 15mm bore steel water tubing 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 15 | All as per serial item No. 14.00 here-in-above but except pipes. |
| 16 | S&F 25mm bore steel water tubing 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 17 | All as per serial item No. 16.00 here-in-above but except pipes. |
| 18 | S&F 40mm bore steel water tubing 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 19 | All as per serial item No. 18.00 here-in-above but except pipes. |
| 20 | Disconnection of existing tanks, setting aside for repairing, cleaning etc and hoisting after cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacity upto and including 500 ltrs and endorsed the ward ' CLEANED ON WITH DATE' with white synthetic enamel paint including replacement of broken/unserviceable fitting such as elbow, Tea, socket, nipple of any size etc, complete all as specified and directed. |
| 21 | Disconnection of existing tanks, setting aside for repairing, cleaning etc and hoisting after cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacity exc 500 ltrs but not exc 1000 ltrs and endorsed the ward ' CLEANED ON WITH DATE' with white synthetic enamel paint including replacement of broken/unserviceable fitting such as elbow, Tea, socket, nipple of any size etc, complete all as specified and directed. |
| 22 | Disconnection of existing tanks, setting aside for repairing, cleaning etc and hoisting after cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacity exc 1000 ltrs but not exc 2000 ltrs and endorsed the ward ' CLEANED ON WITH DATE' with white synthetic enamel paint including replacement of broken/unserviceable fitting such as elbow, Tea, socket, nipple of any size etc, complete all as specified and directed. |
| 23 | Dismantling of water tank of capacity exceeding 250 ltrs but not exceeding 500 ltrs and removing to store, complete all as specified and directed. |
| 24 | Dismantling of water tank of capacity exceeding 500 ltrs but not exceeding 1000 ltrs and removing to store, complete all as specified and directed. |
| 25 | Dismantling of water tank of capacity exceeding 1000 ltrs but not exceeding 2000 ltrs and removing to store, complete all as specified and directed. |
| 26 | M&L for rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) of 500 litres capacity (Tripple layer) white in colour including water tank cover (internaly/ interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes including taking down old existing tank, complete all as specified and directed. |
| 27 | M&L for rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) of 1000 litres capacity (Tripple layer) white in colour including water tank cover (internaly/ interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes including taking down old existing tank, complete all as specified and directed. |
| 28 | M&L for rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) of 2000 litres capacity (Tripple layer) white in colour including water tank cover (internaly/ interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes including taking down old existing tank, complete all as specified and directed. |
| 29 | S&F in replacement of gun metal global or gate valves with iron wheel head, screwed both ends for 25mm bore iron pipe, complete all as specified and directed. |
| 30 | S&F in replacement of gun metal global or gate valves with iron wheel head, screwed both ends for 20mm bore iron pipe, complete all as specified and directed. |
| 31 | S&F in replacement of ball brass valve 25mm dia high pressure with polythene float and fly nut, complete all as specified and directed. |
| 32 | S&F in replacement of ball brass valve 20mm dia high pressure with polythene float and fly nut, complete all as specified and directed. |
| 33 | S&F in replacement of 15mm bore stop valves, brass, fancy type with flange, chromium plated with long shank and cup (concealed type), screwed down high pressure with capstan head handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 34 | S&F in replacement of stop valve 15mm bore with long shank & cup (concealed type) of PTMT any colour screwed for iron pipe & fixed (min. weight 110gms), complete all as specified and directed. |
| 35 | S&F in replacement of stop valve 20mm bore with long shank & cup (concealed type) of PTMT any colour screwed for iron pipe & fixed (min. weight 120gms), complete all as specified and directed. |
| 36 | S&F in replacement of angle valve, brass, chromium plated, fancy type with capstan head handle screwed down high pressure including CP brass wall flanges, screwed for 15mm bore pipe connection, complete all as specified and directed. |
| 37 | S&F in replacement of angle stop valve 15mm bore of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm-90gms), complete all as specified and directed. |
| 38 | S&F in replacement of soap dish, Vitreous SS, approximate size 160x160x90mm, complete all as specified and directed. |
| 39 | S&F in replacement of looking mirror of size 600mmx450mm plain edge 5mm thick selected quality glass, mounted on 6mm thick commercial plywood, aluminum frame around and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 40 | S&F in repair salt glazed stoneware gully traps, square or round mouthed, type 'P' 150x150 mm incl CI cover, complete all as specified and directed. |
| 41 | S&F PVC (SWR) gully trap of 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 42 | S&F in replacement of 100mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed. |
| 43 | S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement (75 mm bore), complete all as specified and directed. |
| 44 | S&F PVC nahani trap with grating to 75mm bore including jointing to waste pipe fixed in cement, complete all as specified and directed. |
| 45 | S&F in replacement of 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including brackets, complete all as specified and directed. |
| 46 | S&F in replacement of vitreous china wash down water closet (pedestal pattern) white complete including connection to drain pipe and to flushing pipe antisyphonage pipe etc, complete all as specified and directed. |
| 47 | S&F in replacement of plastic water closet seat cover, closet pattern with flat bottom and cover and incl mild steel chromium plated or aluminum hinges device, complete all as specified and directed. |
| 48 | S&F in replacement of vitreous china squatting pan, ‘Orissa’ pattern, size 580mm x 440mm white with integral foot rests complete incl trap set in and provision of cement concrete filling in sunken portion, complete all as specified and directed. |
| 49 | S&F in replacement of water closet vitreous china, semi-pedestal pattern (Anglo-Indian Type) white complete including connection to drain pipe and to flushing pipe antisyphonage pipe etc, complete all as specified and directed. |
| 50 | S&F in replacement of vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe & waste pipe), complete all as specified and directed. |
| 51 | S&F push tap 15mm bore any colour of PTMT screwed for iron pipe suitable for urinals (min weight 15mm-50gms), complete all as specified and directed. |
| 52 | S&F in replacement of vitreous china wash basin, white, flat back, size 580x450mm excluding taps, waste chain & plug & porcelain stopper but including brackets, complete all as specified and directed. |
| 53 | S&F flush pipe with rubber washer PVC of 32mm dia for low level cistern pipes, complete all as specified and directed. |
| 54 | S&F waste pipe of dia 40mm for WHB/Sink, complete all as specified and directed. |
| 55 | S&F in replacement of 32mm bore CP brass waste coupling suitable for WHB, complete all as specified and directed. |
| 56 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & wastes including bedding in CM on to dwarf wall or including fixing cantilever brackets & connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 57 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & wastes including bedding in CM on to dwarf wall or including fixing cantilever brackets & connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 58 | S&F in replacement of health faucet, brass, chromium plated with 1250mm long, 15 mm dia chrome finish flexible pipe with wall hook, complete all as specified and directed. |
| 59 | S&F in replacement of Jet spray, brass, chromium plated, heavy duty including flexible pipe suitable for 15mm bore water connection for EWC fixed, complete all as specified and directed. |
| 60 | S&F in replacement of bip tap 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm - 90gms), complete all as specified and directed. |
| 61 | S&F in replacement of bip tap fancy type 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm-105 gms), complete all as specified and directed. |
| 62 | S&F in replacement of bip tap with long body 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm-120 gms), complete all as specified and directed. |
| 63 | S&F in replacement of pillar taps 15mm bore of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm-110gms), complete all as specified and directed. |
| 64 | S&F in replacement of pillar taps fancy type 15mm bore of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm-120gms), complete all as specified and directed. |
| 65 | S&F in replacement of towel rail 450mm long of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 170gms), complete all as specified and directed. |
| 66 | S&F in replacement of bib taps, brass, chromium plated, fancy type, long nose with capstan head handle screwed down high pressure, including CP brass wall flanges, screwed for 15mm bore pipe connection, complete all as specified and directed. |
| 67 | M&L for cutting chases in stone concrete block or slab, walls, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing steps, cills, sunshed, shelves, lintels, etc and cutting chease for water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth, complete all as specified and directed. |
| 68 | Hacking out old broken glass (any thickness, size, quality or description) from metal/ Aluminium frames including punching or drilling out old glazing pins/ spring clips, complete all as specified and directed. |
| 69 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed. |
| 70 | S&F 3mm figured glass, pin head type and glazing with oil putty in squares not exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 71 | S&F in repair of galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks or galvanised wire staples, complete all as specified and directed. |
| 72 | Taking down chowkats or frames with shutters (without taking off shutters from the frame), area exc 1.50 Sqm but not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 73 | Taking down chowkats or frames with shutters (without taking off shutters from the frame), area not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 74 | Taking down shutters of any description, area not exc 1.0 Sqm each, complete all as specified and directed. |
| 75 | Taking down shutters of any description, area exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed. |
| 76 | Taking down shutters of any description, area exc 1.0 Sqm each, complete all as specified and directed. |
| 77 | Refixing in same opening shutters of any description, area exc 1.0 Sqm but not exc 2.0 Sqm, complete all as specified and directed. |
| 78 | Refixing in same opening shutters of any description, area exc 2.0 Sqm, complete all as specified and directed. |
| 79 | S&F 125x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc and back recess to be filled with PCC (1:3:6) type C-0, complete all as specified and directed. |
| 80 | S&F 105x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc and back recess to be filled with PCC (1:3:6) type C-0, complete all as specified and directed. |
| 81 | Cutting holes in brick walls built in cement mortar and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half but not exc one brick, complete all as specified and directed. |
| 82 | S&F 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides (Sample of Doors as per Bldg No. NP-23 HQ 71 Sub Area), complete all as specified and directed. |
| 83 | S&F 35mm glazed and skeleton shutters, 2nd class HW open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a), supplied and fitted to chowkats at site, complete all as specified and directed. |
| 84 | S&F factory made solid PVC Moulded Door Shutter wall nut colour, 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing but 2mm thick Moulded Prelam PVC Sheet on the front ace & 2mm Plain colour PVC Sheet on back face, complete all as specified and directed. |
| 85 | S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm thick wall nut colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. |
| 86 | S&F factory made pressed steel frame steel window/ vent with glazed & gauged shutter (combined with side hung shutters incl box type hinges, steel handle, necessary locking arrangement, peg stay complete with one shop coat of zinc chrome primer including PCC (1:3:6) type C-0 filling in back side recess profile portion, complete all as specified and directed.Note : Rate quoted are included for wire gauged shutters and glazed window shutters. |
| 87 | S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed. |
| 88 | S&F 300mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed. |
| 89 | S&F in replacement of MS helical door spring 300mm size including roller and roller plate, fixed to wooden or steel frames with welding / fitted with screws etc, complete all as specified and directed. |
| 90 | S&F aluminium powder coated (match with door shutters) hydraullic door closer, suitable for aluminium glass door shutters of 851 to1000mm in width and of weight between 61 to 80 kgs and fixed, complete all as specified and directed. |
| 91 | S&F 150mm size aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 92 | S&F 150mm extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 93 | S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and as directed. |
| 94 | Taking down cement plaster of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 95 | M&L for rendering 15mm thick on fair faces of brick work in cement mortar 1:4, finished the surface even and smooth without using extra cement with using Water proofing compound, complete all as specified and directed.Note :- Water proofing compound shall be measured and paid separately. |
| 96 | M&L for rendering 10mm thick in cement mortor 1:6 on fair face on brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and directed. |
| 97 | M&L for two coats of cement base paint over a coat of alkali resistant primer including preparation of newly plastered surfaces of wall, complete all as specified and directed. |
| 98 | M&L two coats of oil bound distember over a coat of primer over and including 2-3mm wall care putty including preparation of new plastered surfaces of wall, complete all as specified and directed. |
| 99 | M&L for preparation of new wooden or untreated wood surfaces of any description, exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 100 | S&F in replacement of brass CP shower rose of 125mm dia, 195mm long with bend of 45 degreee with flange, fixed to 15mm bore iron pipe, complete all as specified and as directed. |
| 101 | S&F PVC connections of 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. |
| 102 | S&F PVC connections of 15mm size with PTMT nuts of length 600mm, complete all as specified and directed. |
| 103 | S&F CP gratings of any dia, fixed in repairs, complete all as specified and directed. |
| 104 | Demollition of stone slabs and tiles, laid bedded and pointed in any mortar of any description or thickness as in floors, aprons etc, complete all as specified and directed. |
| 105 | M&L for 20-25mm thick machine cut kota stone slab flooring as in floors, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone slab incl rubbing and polishing complete, fixed over and including screed bed 20mm thick in CM 1:4, complete all as specified and directed. |
| 106 | M&L for 20-25mm thick machine cut kota stone slab flooring as on vertical surface, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone slab incl rubbing and polishing complete, fixed over and including plaster 10mm thick in CM 1:4, complete all as specified and directed. |
| 107 | M&L for 20-25mm thick marble strip cut to width not exc 100mm wide fixed as in border of floor, stair case, walk ways etc incl rubbing and polishing complete fixed over and including screed bed 20mm thick in CM 1:4, complete all as specified and directed. |
| 108 | M&L for Red/ Black granite (of any type) stone slab of 16mm thick, machine cut as in pillars/ staircase/ window cills/ counter top slab, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with rounding to edges of stone slabs one edge complete, fixed over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed. |
| 109 | M&L for 16-18mm thick green marble stone slab as in window cills incl bull nosing rounding edges directed colour, machine cut as in cills / skirting / dado, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble stone including grinding and polishing, fixed over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed. |
| 110 | Supply only integral water proofing compound, complete all as specified and directed. |
| 111 | S&F in replacement of corner glass shelf with assembly, complete all as specified and directed. |
| 112 | S&F 18/19mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard, kitchen cabinet or similar work etc including provn of 6mm thick teak wood lipping alround the board/ shutter, complete all as specified and directed. |
| 113 | S&F 30mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed. |
| 114 | S&F aluminium handles, cast type, anodised 100mm long, complete all as specified and directed. |
| 115 | S&F 100mm size hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 116 | S&F magnet catchers 50mm size steel plate MS body and striking plate incl letting in & fixed, complete all as specified and directed. |
| 117 | S&F in replacement of stainless steel multipurpose basket in wooden drawers / partitions for storing rations of various types made of 3 to 4mm dia stainless steel rods, fixed in side partitions etc fixed, suitable for modular kitchen, complete all as specified and directed. |
| 118 | S&F in replacement of stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape, suitable for modular kitchen, complete all as specified and directed. |
| 119 | S&F in replacement of telescopic drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electrogalvanised, suitable for modular kitchen, complete all as specified and directed. |
| 120 | Dismantling of asbestos cement (corrugated or semi corrugated etc.) sheets in roof covering including ridges, complete all as specified and directed. |
| 121 | S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls, fixed with self tapping screws, complete all as specified and directed. |
| 122 | S&F 0.50mm prepainted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/ valley gutter/ Barge board, fixed with self tapping screws, complete all as specified and directed. |
| 123 | M&L for rolled mild steel work as in roof trusses (framed), trussed, purline, cross gantries and fastening and heavy brakets framing (Beam, tee, angle,channel, flat section and MS Plates) including distance pieces cleats etc. conforming Fe-410-w (Gde- E-250) quality 'A' complete all as specified and directed. |
| 124 | M&L for mild steel bolts, purpose made with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30cm long and dia of neck exceeding 12mm but not exceeding 20mm, complete all as specified and directed. |
| 125 | M&L for preparation of new or previously untreated steel surface of any description, exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 126 | M&L for preparation of old steel and iron surface of any description, not otherwise described over 10 cm width or girth applying two coats of aluminium paint and over coat of aluminium red oxide priming with any shade as approved, complete all as specified and directed. |
| 127 | M&L for rendering 5mm thick in cement mortor 1:3 as on ceiling without using extra cement, complete all as specified and directed. |
| 128 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed. |
| 129 | M&L for preparation old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 130 | Demolition of un-reinforced cement concrete as in ground floors for levelling of and pavings not exceeding 15cm thickness including floor finish, complete all as specified and directed. |
| 131 | M&L for 50mm thick plain cement concrete type C-1 1:3:6 (using 20mm graded crushed stone aggregates) as in plinth protection, finished fair and even without using extra cement. The plinth protection shall be laid in panels and length of the each panel shall not be more than 2.00 metre all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item, complete all as specified and directed. |
| 132 | Providing and fixing power coated aluminium (minimum thickness of power coating 50 micron) for shutters of doors,windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprane gasket required (fitting shall be paid for seprately) with extruded built up standard tubular section /appropriate Z section and other section of approved make conforming to IS:733 and IS:1285 fixing with dash fastner of required dia and size, including necessary filling up the gaps at junctions i.e. top, bottom and sides with required EPDM rubber/neoprene gasket and sliding rooll etc.Aluminiums section shall be smooth ,rust free,straight mitred and jointed mechanical wherever required including cleat angle, aluminium snack beedingfor glazing/panneling,CP brass / stainless steel screws rall as complete all as specified and directed. |
| 133 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with aminium anodic coating of grade AC 15) of approved design/pattern with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 134 | S&F glazing with 5mm thick frosted/ tinted sheet glass not exc 0.50 Sqm in each panel, fixed to aluminium section of doors, windows and fixed frame with suitable EPDM rubber packing and powder coated aluminium beading to frame, complete all as specified and directed. |
| 135 | S&F stainless steel mosquito proof wire cloth of stainless 0.36mm dia and 1.4mm aperture fixed with aluminium flat/channel and screws, complete all as specified and directed. |
| 136 | M&L for plain cement concrete 1:3:6 type C-1(using 20mm graded crushed stone aggregates) as in roof paddind/ levelling coarse between wall and roof sheet or chamfered, finished even and smooth with using extra cement, complete all as specified and directed. |
| 137 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends swan necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories), complete all as specified and directed. |
| 138 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 139 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 140 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with MS clamps of suitable size, complete all as specified and directed. |
| 141 | S&F 110mm bore PVC (SWR) bends with access door any radius, complete all as specified and directed. |
| 142 | S&F PVC (SWR) bends 75mm bore any radius with oveal & acces door, complete all as specified and directed. |
| 143 | S&F PVC (SWR) bends 110mm bore any radius with oveal & acces door, complete all as specified and directed. |
| 144 | S&F PVC (SWR) junction single, (Single T/Y jn) with Access door) suitable for 75mm bore pipe, equal or unequal, complete all as specified and directed. |
| 145 | S&F PVC (SWR) junction single, (Single T/Y jn) with Access door) suitable for 110mm bore pipe, equal or unequal, complete all as specified and directed. |
| 146 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 147 | M&L for glazed ceramic coloured tiles in vertical surfaces, size of each tile 450mm x 350mm x 7mm thick and above nearest sizes, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, fixed over and including 10mm plaster in CM 1:3, complete all as specified and directed. |
| 148 | M&L for non skid ceramic coloured tiles, 7 to 8mm thick (sqare/ rectanglear), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor, skirtings etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 15mm thick screed bed/ plaster in CM 1:4, complete all as specified and directed. |
| 149 | M&L for coloured glazed ceramic tiles as on vertical surfaces, size of each tile 600x300mmx7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, fixed over and including 10mm plaster in CM 1:3, complete all as specified and directed. |
| 150 | M&L for non skid ceramic coloured tiles, 7 to 8mm thick (sqare/ rectanglear), area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floor, skirtings etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 15mm thick screed bed/ plaster in CM 1:4, complete all as specified and directed. |
| 151 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets of any thickness including cover fillets, complete all as specified and directed. |
| 152 | S&F 5mm thick (HL Series) insulated PVC Wall Lining honeycombed consisting of PVC insulated panels (As per approved by GE) with approved design & pattern duly fitted into the wall including PVC angle Jointers, U jointers, beading etc as required at the edges including removing and re-fixing electric boards & plates and covered with PVC strips or beading after fixing wall paneling including dismantling of old PVC wall panneling, complete all as specified and directed. |
| 153 | S&F 12mm thickness toughned glass as in hinged doors, partition, automatic doors, etc. and similar work including cutting to shape, drilling holes required, complete all as specified and directed. |
| 154 | S&F curtain rod stainless steel knobs onion shape or any other shape, complete all as specified and directed. |
| 155 | S&F curtain rod stainless steel brackets, fixed with brass screws, complete all as specified and directed. |
| 156 | M&L for rendering 15mm thick on fair face of brick work or concrete surfaces in CM 1:4, finished even and smooth w/o using extra cement on roof surface, complete all as specified and directed. |
| 157 | M&L for priming the roof surface with bitumenous primer @ 0.3 litres/Sqm and applying a coat of semi hot blown 85/25 grade bitumen @ 1.2 Kg/Sqm and thereafter supply and laying polymeric membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10cm (overlap to be thermo fused by flame) followed by another coat of semi hot blown 85/25 grade bitumen @ 0.7 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm including taking down existing membrane sheet incl plastering complete all as specified and directed. |
| 158 | M&L for preparation and applying two coats of aluminium paint on roof padding surfaces, complete all as specified and directed. S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. Please Enable Macros to View BoQ information |
