|
| 1 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based steel sheet 0.50mm thick, of any colour having tensile strength of 550 Mpa, profiled for ridge as in roof covering, fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 5 | S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. with Fe 410 W (Gde E-250) quality 'A' complete all as specified and directed. |
| 6 | All as per item No 5 above but erection & fixing only. |
| 7 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 8 | M&L for 4 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in walls complete all as specified and directed. |
| 9 | M&L for 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in ceiling complete all as specified and directed. |
| 10 | S&F 12mm thick, 2nd Class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall panelling/false ceiling, including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed. |
| 11 | S&F clean swan batten at 30 cm centre to centre exc 5 and not exc 15 cm of 2nd class soft wood complete all as specified and directed. |
| 12 | Dismantling boarding, any description fixed in any position with nails complete all as specified and directed. |
| 13 | M&L 20 mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails as in wall, facia, eaves boarding complete all as specified and directed |
| 14 | Same as per item No 13 above but fixing only. |
| 15 | Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, framed or unframed work complete all as specified and directed. |
| 16 | Plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails complete all as specified and directed. |
| 17 | M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and directed. |
| 18 | Pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 19 | M&L for machine cut Kota stone slab flooring 18-20mm thick over screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 20 | M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 21 | M&L for 25mm thick PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate as in floor finished even and rough to receive the topping layer complete all as specified and directed. |
| 22 | Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 23 | M&L for cement concrete 1:3:6 type C1 (using 20mm stone aggregate as in plinth protection), 75mm thick complete all as specified and directed. |
| 24 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 25 | S&F for glazed ceramic tiles coloured of size 350x250x7mm/ 450x350x7mm thick fixed in vertical surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match including 10mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 26 | M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 27 | Demolition of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc., complete all as specified and directed. |
| 28 | M&L brick work with old size bricks, straight or curved on plan exc 6m radius, in cement mortar 1:6 complete all as specified and directed. |
| 29 | M&L brickwork with old size bricks, straight or curved on plan to any radius in half brick thick walls, in cement mortar 1:6 complete all as specified and directed. |
| 30 | Taking down cement plaster on brick walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 31 | M& L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick / concrete/stone, surfaces and finished even and smooth without using extra cement mixed with WPC @ 3% by Wt. of cement complete all as specified and directed. Note:- WPC shall be measured and paid separately) |
| 32 | Supply only approved integral water proofing compound complete all as specified and directed. |
| 33 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces) complete all as specified and directed. |
| 34 | M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint complete all as specified and directed. |
| 35 | M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of cement primer complete all as specified and directed. |
| 36 | M&L for preparation of old steel/galvanised surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 37 | M&L for applying two coats of synthetic enamel paint over one coat of red oxide exc 10cm width or girth on newly prepared steel surfaces complete all as specified and directed. |
| 38 | M&L for two coats of synthetic enamel paint over one coat of pink primer on newly prepared wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed. |
| 39 | M&L for preparation of old wooden surface of any description not otherwise described over 10cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and directed. |
| 40 | Taking down chowkhats or frame exe. 1.5sqm and n.exc. 4 sqm each with shutter (w/o taking out shutter) complete all as specified and directed. |
| 41 | Taking down chowkhats or frame not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed. |
| 42 | S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with flue pinned at joints complete all as specified and directed. |
| 43 | S&F for 35mm thick, 2nd class soft wood, plain framed panelled shutter (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats complete all as specified and directed. |
| 44 | S&F 35mm thick, 2nd class soft wood, Glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. complete all as specified and directed. |
| 45 | S&F 30mm thick, 2nd class soft wood, Glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc supplied and fixed to chowkhat, shutter for window and ventilator as specified in SSR Part-I , Section-8, clause 8.24 (b) complete all as specified and directed. |
| 46 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete all as specified and directed. |
| 47 | S & F for factory made fully glazed PVC window/ventilator shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; complete all as specified and directed. Note:- Glass shall be measured and paid separately. |
| 48 | S & F 300 mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy complete all as specified and directed. |
| 49 | S&F precoated sheet type door spring, heavy type, 200 mm long including roller and roller plate complete all as specified and directed. |
| 50 | S & F Mild Steel butt hinges 100mm long medium weight complete all as specified and directed. |
| 51 | S & F 200mm long aluminium alloy, anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 52 | S & F aluminium handles, cast type, anodized 150mm long complete all as specified and directed. |
| 53 | S&F for 75mm long stainless steel butt hinges medium weight cold rolled complete all as specified and directed. |
| 54 | S&F for 150mm length aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 55 | S&F Aluminium handle, cast type, anodised 100 mm long complete all as specified and directed. |
| 56 | S&F Harrison rails, stainless steel, with fixing brackets, stops, rollers etc., complete all as specified and directed. |
| 57 | Hacking out old broken glass (any thickness size quality or description) from wooden frame glazed with putty or wooden beads complete all as specified and directed. |
| 58 | M & L sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 in each pane, 3mm thick complete all as specified and directed. |
| 59 | S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and directed. |
| 60 | S&F galvanised mild steel wire cloth .56mm nominal dia of wire and average width of aperture 1.18mm including fixed all as specified. |
| 61 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed. |
| 62 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed. |
| 63 | S&F galvanized iron medium grade tubing with all fitting laid in concealed, trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 15mm dia complete all as specified and directed.. |
| 64 | S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed. |
| 65 | M&L for lagging to pipes 20mm dia used in internal water supply or plumping all round with,25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 kg/cum conforming to IS-9842 complete all as specified and directed. |
| 66 | S&F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I including dismantling of existing tank and removing to store complete all as specified and directed.. |
| 67 | S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed in repair with 20 mm dia complete all as specified and directed. |
| 68 | S&F 600x450 mm size bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 69 | S&F Sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 70 | M & L for Vitreous China wash basin, vertically mounted fancy bowl flat back size 550 x 400 m including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including MS brackets & waste pipe complete all as specified and directed.. |
| 71 | S&F fixed in repair for Vitreous China squatting Pan \\"Orrisa Pattern\\" size 580 x 440mm white with integral foot rests including flush pipe of PVC 32mm dia for low level cistern complete all as specified and directed. |
| 72 | S&F in repair Vitreous China wash down water closet pan with 'P' trap (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc. complete all as specified and directed. |
| 73 | S&F PVC valve-less symphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets (10 Ltr) capacity fixed in repair complete all as specified and directed. |
| 74 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 75 | Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed. |
| 76 | S&F in repair PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified and directed. |
| 77 | S&F in repair Stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 78 | M & L in repair for CP Pillar taps, with capstan head chromium plated 15 mm bore fancy type complete all as specified and directed.. |
| 79 | S&F in repair bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked) complete all as specified and directed. |
| 80 | S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 81 | S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall or laid in floor etc complete all as specified. |
| 82 | S&F in repair PVC gully trap square or round mouthed type (P) , size of trap 125x 110mm and jointing to drains with solvent cement complete all as specified. |
| 83 | S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed fixed to wall or laid in trench complete all as specified. |
| 84 | S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified. |
| 85 | M&L for PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed. |
| 86 | M&L for PVC (SWR) vent cowl for 75 mm dia complete all as specified and directed. |
| 87 | Demolition of Reinforced in suspended slabs, beams, lintels etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 88 | M &L for providing reinforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 89 | M&L MS TMT bars 10mm dia and over cut to length, bent to shape required incl. cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed. |
| 90 | M&L for form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed. |
| 91 | M&L for PCC M-10 (Nominal mix) type C-1 using 20mm graded aggregate as in surface channel and drain complete all as specified and directed. |
| 92 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 93 | M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed. |
| 94 | M&L for Chequered cement concrete tiles 20 cmX20 cmX25 mm thick sat jointed and pointed in neat cement slurry in floor with grey cement and no pigments with 25 mm thick screed bed in CM1:4 complete all as specified and directed. |
| 95 | M&L for providing, cement concrete type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 96 | M&L for walling of random rubble masonry, well bonded, bedded and solidly hearted, built in CM (1:4) complete all as specified and directed. |
| 97 | M&L brick work with old size bricks, straight or curved on plan exc 6m radius, in cement mortar 1:6 complete all as specified and directed. |
| 98 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished over and smooth w/o using extra cement. |
| 99 | M & L for rendering 15mm thick on stone masonry concrete surfaces or other than fair faces of brick work or on one side of lathing in CM 1:4 finished over and smooth w/o using extra cement complete all as specified and directed. |
| 100 | M & L for rendering 15mm thick on stone masonry concrete surfaces or other than fair faces of brick work or on one side of lathing in CM 1:6 finished over and smooth w/o using extra cement complete all as specified and directed. |
| 101 | M & L for raised pointing to random or polygonal rubble, un-coursed or brought upto courses in cement mortar 1:4 complete all as specified and as directed. |
| 102 | M & L applying one coats of cement base paint including preparation of old plastered surface of wall complete all as specified and directed. |
| 103 | M & L applying two coats of Oil bound distemper including preparation of newly plastered surface of wall over 3mm call care putty complete all as specified and as directed. |
| 104 | M & L applying two coats of Oil bound distemper including preparation of old plastered surface of wall over 3mm call care putty complete all as specified and as directed. |
| 105 | Dismantling of timber scantlings 40 sq cm and over in sec in any position in unframed work complete all as specified and directed. |
| 106 | M & L for second class soft wood as in scantling clean sawn fixed in position but except wood. |
| 107 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed. |
| 108 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:5 complete all as specified and as directed. |
| 109 | M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 15mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 110 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 111 | S&F eaves boarding of 20mm thick of softwood 2nd class with nails in any situation (except flooring and skirting) , planed one side with butt joints complete all as specified and directed. |
| 112 | S & F 12mm Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed. |
| 113 | M & L for 2nd class soft wood moulding as in cornices, picture rails and like, not exc 6 Sqcm in section, wrought fixed with nails complete all as specified and as directed. |
| 114 | M & L for 18-19mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 115 | S & F Continuous (piano) hinges, brass, bright finish or electro galvanised of 40mm Width of flaps (when open) complete all as specified and as directed |
| 116 | M&L for 6mm thick E board (classic) of size 610x610mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminium Tee as cross runner and aluminium angle of size 25x25x1.25mm at the perimeter including Gl 6mm adjustable suspender of required length of any description complete all as specified and directed. Note:- The design and specification of the ceiling board to be approved by GE. |
| 117 | M & L for mild steel work as in hold fasts, wall ties and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 118 | M & L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 119 | S & F 250 mm long aluminium alloy anodized sliding door (boil type) and fixing clips of sheets cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminium alloy complete all as specified and directed. |
| 120 | S&F pre-coated sheet type door spring, heavy type, 300 mm long including roller and roller plate complete all as specified and directed. |
| 121 | S&F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n exc 200 cu. cm each complete all as specified and directed. |
| 122 | S & F Mild Steel butt hinges 100mm long medium weight complete all as specified and directed. |
| 123 | S & F Mild Steel butt hinges 75mm long medium weight complete all as specified and directed. |
| 124 | S & F aluminium handles, cast type, anodized 150mm long complete all as specified and directed. |
| 125 | S& F in repair stainless steel curtain road of 25mm dia of 0.80 mm to 1mm thickness including brackets, stops, roller etc complete all as specified and as directed |
| 126 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed |
| 127 | M&L for cutting chases ,pinning in making good to facing where required and pointing in CM 1:3 to edges of landing , steps , cills , sunshades, shelves , lintel etc. and cutting chases for concealed water tubing etc and making good cutting n. exc 10 cm girth complete all as specified and directed. |
| 128 | M & L for 16mm bore 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 129 | M & L for 20mm bore 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 130 | M & L for 16mm Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed. |
| 131 | S & F in repair of ISI marked 15mm bore stop valve, fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed. |
| 132 | S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified. |
| 133 | S & F ISI marked 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 134 | S& F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, crewed both ends for iron pipe and fixed complete all as specified and directed. |
| 135 | Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed |
| 136 | Dismantling of existing pipes 110/75 mm dia complete all as specified and directed. |
| 137 | M & L PCC 1:3:6 type C - 2 in foundation, filling and mass concrete (using 40 mm graded crushed stone aggregate) complete all as specified and directed. |
| 138 | All as per Item No 96 above but except stone. |
| 139 | Extra over stone walling for hammer dressing to face of stones and dressing of face beds and joints, as specified of random rubble walling uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 20 mm on granite or trap stone complete all as specified and directed. |
| 140 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed |
| 141 | Removing excavated material n exc 50 m and depositing where directed at al level n. exc 1.50 m above the starting point complete all as specified and directed. |
| 142 | M&L for construction of 25 users septic tank complete all as specified and shown on drawing No. CESZ-TD-/2015 sheet No 1/3 & 2/3 dated 22 Feb 2015 (Revised dt 21 Mar 2015) and specified in particular specifications. |
| 143 | M&L for construction of Soakage well, of size 1.2 m dia at bottom and 4.5 m effective depth complete all as specified and shown on drawing No. CESZ-TD-/2015 sheet No 1/3 & 3/3 dated 22 Feb 2015 (Revised dt 21 Mar 2015) and specified in particular specifications. |
| 144 | Excavation in trenches not exceeding 1.25m wide and n exc 1.5m in depth for foundations, etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan not exceeding 1.5 mtr in depth and getting out in any type of soil, complete all as specified and directed. |
| 145 | M&L SGSW line 150mm dia SGSW pipe laid in trenches and jointed complete all as specified and directed. |
| 146 | M&L for brick work sub class 'B' old size brick, straight or curved on plan exceeding 6m mean radius built in CM 1:4 as in man holes and repairs complete all as specified and directed. |
| 147 | M&L for precast RCC 1:2:4 type B1 cover slab using 20mm graded stone aggregate with plain fair faces incl. chamfers, weathering and setting in CM 1:6 including necessary form work complete all as specified and directed. |
| 148 | M&L 150 mm thick reinforced concrete pipes, class NP2 laid and jointed complete with collars complete all as specified and directed. |
| 149 | M&L for PCC M 7.5 (Nominal mix) type D-2, using 40mm graded stone aggregate as in bed of drain pipe 150mm dia (nominal) including packing under and haunching against the sides of pipe after they are laid and tasted complete all as specified and directed. |
| 150 | M & L PCC 1:2:4 type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 151 | M & L PCC 1:2:4 type B -1 (20 mm graded aggregate) as in surface channel and drain of manholes etc complete all as specified and directed. |
| 152 | M&L for 15mm thick rendering cement plaster in CM 1:3 on other than fair faces of brick masonry surface finished even and smooth without using extra cement complete all as specified and directed. |
| 153 | M&L for PVC (SWR) 110 mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 154 | Surface excavation n. exc 30 cm deep and average 15cm deep and getting out soft/ loose soil complete all as specified and directed. |
| 155 | M & L for point wiring , One light /one fan/one bell point controlled by one way switch, including taking down old unserviceable existing point wiring, with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLSH, drawn through PVC casing caping including accessories and provisioning of PVC boxes for mounting switches, switch socket, fan regulator, number of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly. |
| 156 | All as per Item No 155 above but point wiring for One socket outlet 5 pins 5 amps controlled by one switch on same board. |
| 157 | All as per Item No 155 above but point wiring One socket outlet 5 pins 5 amps controlled by one switch on independent board. |
| 158 | All as per Item No 155 herein before but wiring with 2.5 sqmm copper wire (FRLSH) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board. |
| 159 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 160 | S&F socket outlet multi 5 pins 6 amp, complete all as specified and directed. |
| 161 | S&F switch socket combination 2 in 1, 6A flush type complete all as specified and directed. |
| 162 | S&F switch socket combination 3 pin 16A, flush type complete all as specified and directed. |
| 163 | S&F ceiling rose PVC/poly carbonate, isolated body three terminal complete all as specified and directed. |
| 164 | S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. |
| 165 | Supply and fix LED Bulb 9 Watt complete all as specified and directed. |
| 166 | S&F sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 167 | S&F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed. |
| 168 | S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed. |
| 169 | Supply and fix exhaust fan, steel body AC single Phase, 230V of size 380 mm sweep with blades, frame and louvers complete all as specified and directed. |
| 170 | M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 6 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surface including taking down old unserviceable submain wiring and making good disturbed surface complete all as specified and directed. |
| 171 | S & F in replacement LED light fitting 1x9W/10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 172 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 173 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathed of PVC tape overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable of size 16 Sqmm complete all as specified and directed. |
| 174 | M&L for earthing complete with galvanized steel earth plate electrode 600mmx 600mmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0 mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed. |
| 175 | M & L sub main wiring with 2 runs of 4 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor FRLS including PVC casing & caping of suitable size and provision of one run 4 sqmm PVC insulated unsheathed single core copper conductor as earth continuity , connected to earth dolly inclusive of all accessories complete all as specified and directed. Note :- 3 Runs of 4 Sqmm wire and one run of PVC casing & caping shall be measured as one unit . |
| 176 | Supply and fix ceiling fans, complete with three blade, down rod, accessories230V, 1400 mm sweep, with Squirrel cage induction motor complete all as specified and directed. . |
| 177 | M&L for sand cushioning to underground cables 8 cm below the cable before laying and 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified. Note:- The punned thickness of sand shall be measured and paid. |
| 178 | Material and labour for kiln burnt Sub class 'B' bricks laid dry, flat , width wise along the length of cable in trenches after sand cushioning for protection of under ground cable complete all as specified and directed. |
| 179 | Taking up the unserviceable XLPE LT UG cable 3.5/ 4 core 16 Sqmm to 95 Sqmm from trenches or walls complete all as specified and as directed. |
| 180 | Taking up the unserviceable XLPE LT UG cable 3.5/ 4 core 120 Sqmm to 240 Sqmm in trenches or walls complete all as specified and as directed. |
| 181 | S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, 3.5 core 120 sqmm cross sectional area in trenches or walls complete all as specified and as directed. Note: for SI Nos 9 to 10 : 1. Excavation & Earth work sand cushioning GI Pipe and brick for cable protection will be measured and paid separately. |
| 182 | All as per item No. 181 above but 3.5 core 50 Sqmm |
| 183 | All as per item No. 181 above but 3.5 core 35 Sqmm |
| 184 | Taking down the existing unserviceable Distribution panel board with conventional type switches, unserviceable MCCBs from Panel boards, controls and removing from site for further disposal complete all as specified and directed. |
| 185 | Supplying, assembling, erection, testing and commissioning of Electrical panel cubical outdoor type powder coated with 8 / 7 tank process suitable for operation on 3-phase + N + E, 415V, 50 Hz, AC with internal arc containment, internally pre-wired with copper conductor factory fabricated as per CPRI approved make specified in CA, floor mounted free standing made out of 3.15mm thick CRCA sheet, and shall be compartmentalised with rubber gasketed hinged door having front and rear opening for installation of separate cable alleys, bus bar chamber and switch gear compartments, dust and vermin proof duly powder coated with aluminium bus bars 800A capacity for phases and neutral, set of three LED indicating lamps with base, air ventilation to be provided for heat dissipation, suitable sized knock out holes for cable glands shall be provided, with and including provision of the following switch gears, including suitable size of necessary PCC (1 : 3 : 6) type C2 as in foundation complete all as specified and directed. |
| 186 | a) Aluminium Bus bar 800 Amps capacity TPN, full for phase and neutral with colour code PVC sleeves. - 01 Job |
| 187 | b) LED RYB indicating lamps – 01 set |
| 188 | c) LED Ammeter and voltmeter with necessary CTs and display of required rating. |
| 189 | d) MCCB 400Amp, 36KA TPN, 415 Volts - 1 Nos (Incomer) |
| 190 | e) MCCB 250Amp, 36 KA TPN, 415 Volts - 01 Nos (Out going) |
| 191 | f) MCCB 125Amp, 18KA TPN, 415 Volts - 03 Nos (Out going) |
| 192 | g) Panel wiring with PVC Insulated un sheathed single core, 1100 Volts grade cable with copper conductor, multi stranded of suitable size. - 01 Job |
| 193 | h) Interconnection of busbar with MCCB, , contactor with suitable size aluminium strip - 01 Job |
| 194 | j) Provisioning of cable glands and cable lugs for all incoming and out going cables & connecting the earthing to an earthing test point to main switch board as specified and testing on completion complete all as specified & directed. 01 Job |
| 195 | Supply and fix in LT Straight through joint heat shrinkable 1100 volts, 25 sqmm to 50 sqmm including dismantling the existing unserviceable complete all as specified and directed. |
| 196 | Supply and fix LT Straight through joint heat shrinkable 1100 Volts, 70 sqmm to 150 sqmm including dismantling the existing unserviceable complete all as specified and directed. Please Enable Macros to View BoQ information |
