Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed by Engr-in-charges. |
| 2 | Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed by Engr-in-charges. |
| 3 | M & L for Mild Steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and frame ; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-charges. |
| 4 | M & L for mild steel framed work as in brackets etc for cooller stands (including removing of old frame from any surface stone/brick/concrete by any means, and fixing of new frame in walls) etc framed steps/stairs etc complete using MS angle iron, Steel bars gusset plate etc conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-charges. |
| 5 | S&F mild steel frame work as in stairs ,hand railings, half round or other stock section or section or core for wooden hand rail straidgt portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for roof including necessary drilling bolting or riveting etc and similar work confirming to Fe 410-0 or fe 310-0 complete all as specified and directed by Engr-in-charges. |
| 6 | S&F for Mild steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesbracket framing including distance pieces, cleats etc Fe-410-W(Gde-E-250) quality complete all as specified and directed by Engr-in-charges. |
| 7 | Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but nexc 1.50 sqm & depthd nexc 60 cm complete all as specified and directed by Engr-in-charges. |
| 8 | M&L for UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) polyvinyl chloride (PVC) sheet frame of width 150mm & 18mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, all as per manufracturers specifications, complete all as specified and directed by Engr-in-charges. |
| 9 | M&L for 18 mm thick solid PVC sheet UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified and directed by Engr-in-charges. |
| 10 | S&F 30 mm width of FI continious piano hinges, stainless steel, complete assembly complete all as specified and directed by Engr-in-charges. |
| 11 | M&L for Extra over solid PVC sheet for fixing 18 mm width & 2-3 mm thick PVC coloured lipping of approved design & colour fixed with solvent cement or headless nails, complete all as specified and directed by Engr-in-charges. |
| 12 | S&F '0' degree clip type self closing hinges for cabinets fixed with cadimum coated screws, complete all as specified and directed by Engr-in-charges. |
| 13 | S&F 75mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint drawers complete all as specified and directed by Engr-in-charges. |
| 14 | S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as specified and directed by Engr-in-charges. |
| 15 | S&F stainless steel drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers. complete all as specified and directed by Engr-in-charges. |
| 16 | M&L for stainless steel tray of 304 grade as per trade pattern of various sizes for drawer to keep the kitchen utensil complete all as specified and directed by Engr-in-charges. |
| 17 | S&F as in repairs for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of synthetic enamel paint on internal surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all as specified and directed by Engr-in-charges. |
| 18 | S&F for (a) of 2nd class hardwood 35mm thick gauzed/Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc., edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats including followings complete all as specified and directed by Engr-in-charges.(b) SS wire cloth 0.36mm nominal dia of wire, average width of aperture 1.40mm fixed with SS wire staple.(c) Aluminium Grill Medium grade mess size 50x50mmx5mm , fixed at outer edge at outer edge of door.(d) Apply one coat of Pink-Primer |
| 19 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm (Single side rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engr-in-charges. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 20 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm (Both side rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engr-in-charges. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 21 | Providing & Fixinng Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engr-in-charges. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 22 | Providing & Fixinng Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engr-in-charges. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 23 | S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charges. |
| 24 | S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charges. |
| 25 | S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charges. |
| 26 | S &F of stainless steel butt hinges 100 mm size medium weight for WPC door complete all as specified and directed by Engr-in-charges. |
| 27 | S&F 100mm size mild steel single action door spring hinge complete all as specified and directed by Engr-in-charges. |
| 28 | S&F Magic eye brass body 15 to 20 mm dia all as per sample including drilling necessary hole in panel door shutter complete all as specified and directed by Engr-in-charges. |
| 29 | S&F of aluminium anodized tower bolt of size 200 mm long incl necessary screw complete all as specified and directed by Engr-in-charges. |
| 30 | S&F aluminum anodised handle of size 150mm long long necessary \\"Bow Handle D type\\" complete all as specified and directed by Engr-in-charges. |
| 31 | S&F for aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed by Engr-in-charges. |
| 32 | S&F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 140mm long complete all as specified and directed by Engr-in-charges. |
| 33 | S&F for 4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed by Engr-in-charges. |
| 34 | S&F for 3 mm thick plain glass ordinary quality & glazing complete all as specified and directed by Engr-in-charges. |
| 35 | S&F for stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm including necessary fitting on steel/ wooden surfaces complete all as specified and directed by Engr-in-charges. |
| 36 | M&L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold fast iron fixing,coping, chamfered edges including necessary form work complete all as specified and directed by Engr-in-charges. |
| 37 | S&F for flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item complete all as specified and directed by Engr-in-charges. |
| 38 | Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-charges. |
| 39 | M&L for cutting in to old masonry built in cement mortar to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6 complete all as specified and directed by Engr-in-charges. |
| 40 | M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engr-in-charges. |
| 41 | All as per item No 40 above but except stone incl cleaning, removal of CM from existing complete all as specified and directed by Engr-in-charges. |
| 42 | M&L PCC solid building blocks 10 cm thick type B1 1:2:4 set in cement mortar (1:6) complete all as specified and directed by Engr-in-charges. |
| 43 | Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete to squared rubble walling, regular coursed, Jodhpur typeall complete all as specified and directed by Engr-in-charges. |
| 44 | Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charges. |
| 45 | M&L for 25mm thick cement concrete type B-0 1:2:4 as in subbase of floor tiles (using 12.5 mm graded crushed stone aggregate) complete all as specified and directed by Engr-in-charges. |
| 46 | M&L for coloured non-skid ceramic tiles 7 to 8 mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-charges. |
| 47 | All as per above 46 but as in skirting including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engr-in-charges. |
| 48 | M&L for glazed colour ceramic tiles of size 300x450x7mm thick, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles (High-lighter pattern) including10mm thick rendering in CM 1:4 over stone masonary surfaces finished even & rough to receive tiling etc finish complete all as specified and directed by Engr-in-charges. |
| 49 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed by Engr-in-charges. |
| 50 | M & L 18 to 20 mm thick machine cut Kota stone slab flooring , staircase from etc over screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing icluding 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed by Engr-in-charges. |
| 51 | M & L 18 to 20 mm thick machine cut Kota stone in riser of steps, skirting, dado and piller laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing including 10 mm thick backing coat in cement mortor 1:6 complete all as specified and directed by Engr-in-charges. |
| 52 | M & L 18 to 20 mm thick machine cut Kota stone in shelves and other places etc laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-charges. |
| 53 | M & L 18 to 20 mm thick machine cut one side polished black granite in kitchen plate form and windows cill, set and jointed including 20 mm thick screed bed in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-charges. |
| 54 | Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-charges. |
| 55 | M&L for 15 mm thick rendering CM (1:6) over stone masonary surfaces finished even & smooth without extra cement complete all as specified and directed by Engr-in-charges. |
| 56 | M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia of RCC roof projection at any height etc complete all as specified and directed by Engr-in-charges. |
| 57 | M&L for 15mm thick rendering in CM 1:4 finished even and smooth without extra cement on stone wall with WPC compound complete all as specified and directed by Engr-in-charges. Note:- WPC shall be measured and paid seperately. |
| 58 | Supply only Integral water proofing compund complete all as specified and directed by Engr-in-charges. |
| 59 | Racking out joints/pointing to Square rubble masonry Jodhpur type regular coursed built in cement mortar complete all as specified and directed by Engr-in-charges. |
| 60 | M&L preperartion of newly plastered surfaces on wall and applying one coat of 1-2 mm wall putty with fair finished and even surface and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed by Engr-in-charges. |
| 61 | M&L for applying three coats of white wash on newly plastered surface of ceiling including preparation of serfaces complete all as specified and directed by Engr-in-charges. |
| 62 | M&L for applying two coats of cement based paint on newly plastered/ unplastered surface of wall including preparation and one coat of chalk white of serfaces complete all as specified and directed by Engr-in-charges. |
| 63 | M&L for applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-in-charges. |
| 64 | M&L for applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed by Engr-in-charges. |
| 65 | S&F for Stainless steel 25mm curtain rod with fixing brackets, knob etc as in repairs complete all as specified and directed by Engr-in-charges. |
| 66 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide 600mm long with aluminium alloy brackets and gaurd and railing 60cm long complete all as specified and directed by Engr-in-charges. |
| 67 | S&F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass of size 250 mm conical shape /size with CP brackets, gaurd and railing complete all as specified and directed by Engr-in-charges. |
| 68 | S&F in repair wall mounted Stainless steel Soap dish of size 125x75mm any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-charges. |
| 69 | S&F in repair CP brass towel rail 20 mm outer dia `D’ type, 60 cm long between flanges with and including chromium plated brass screws and plastic rawl plugs/cleats, complete all as specified and directed by Engr-in-charges. |
| 70 | S&F as in repairs Bevelled edge mirror size 600x450mm of selected quality glass mounted on PVC frame fixed to wooden plugs with chromium plated brass screws and cup washres complete all as specified and directed by Engr-in-charges. |
| 71 | S&F in repair satainless steel chromium plated peg set of six fixing with wall screws and plastic rawl plugs/cleats complete all as specified and directed by Engr-in-charges. |
| 72 | S&F in repair sinks made of stainless steel 1.00 mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or fixing in RCC slab and connecting waste coupling and to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-charges. |
| 73 | S&F Stainless steel Plate Racks made of stainless steel 0.60 mm thick with plugs, washers and fixed with bolts /screws of size 750 X 600 X 250 mm as in repair complete all as specified and directed by Engr-in-charges. |
| 74 | S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, including long bend flush pipe of 32mm dia HDPE pipe etc complete all as specified and directed by Engr-in-charges. |
| 75 | S & F in repair Vitrous china wash basin, white flat/Corner back size 450x300 mm including , waste pipe, MS brackets complete all as specified and directed by Engr-in-charges. |
| 76 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore complete all as specified and directed by Engr-in-charges. |
| 77 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore complete all as specified and directed by Engr-in-charges. |
| 78 | S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with lead joints laid in trenches or in floor complete all as specified and directed by Engr-in-charges. |
| 79 | S&F 75 mm dia Cast soil waste and vent sand cast pipes in any length with or without ears with lead joints laid in trenches or in floor complete all as specified and directed by Engr-in-charges. |
| 80 | S&F 100 mm dia Cast soil waste and vent sand cast pipes in any length with or without ears with lead joints fixed on wall complete all as specified and directed by Engr-in-charges. |
| 81 | S&F 75 mm dia Cast soil waste and vent sand cast pipes in any length with or without ears with lead joints fixed on wall complete all as specified and directed by Engr-in-charges. |
| 82 | S&F100 mm CI branch pieces single socketed Y equal or unequal fixed with lead joints complete all as specified and directed by Engr-in-charges. |
| 83 | S&F75 mm CI branch pieces single socketed Y equal or unequal fixed with lead joints complete all as specified and directed by Engr-in-charges. |
| 84 | S&F100mm CI bends any radius fixed with lead joints complete all as specified and directed by Engr-in-charges. |
| 85 | S&F 75 mm dia CI bend with oval acess door fixed to pipe fixed with lead joints complete all as specified and directed by Engr-in-charges. |
| 86 | S&F 100mm dia CI vent cowl fixed to pipe complete all as specified and directed by Engr-in-charges. |
| 87 | S&F 75 mm dia CI floor trap plain grating including jointing with solvent cement 75mm dia complete all as specified and directed by Engr-in-charges. |
| 88 | S&F as in repairs of 15 mm dia cast copper alloy bib cock long body with flange with chromium plated fixed with iron pipe complete all as specified and directed by Engr-in-charges. |
| 89 | S & F as in repairs 15 mm dia cast copper alloy angular stop cock with chromium plated long thread with flange complete all as specified and directed by Engr-in-charges. |
| 90 | S&F as in repairs 15mm bore CP brass Sink mixer with regular spout wall mounted and brass nuts ISI Marked complete all as specified and directed by Engr-in-charges. |
| 91 | S&F as in repairs 15mm bore CP brass central hole basin mixer single cock wall mounted swing spout popup waste system with 450mm long copper pipe and brass nuts ISI Marked complete all as specified and directed by Engr-in-charges. |
| 92 | S& F as in repairs chromium plated Wall mixture 3-in-1 system fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure pipe 15mm bore, Hot or Cold, screwed for iron pipe with adujstable wall flange and legs complete all as specified and directed by Engr-in-charges. |
| 93 | S&F in repair of chromium plated brass shower rose 150x150mm dia square with shower arm complete all as specified and directed by Engr-in-charges. |
| 94 | Supply & Fixing low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign PVC connection complete all as specified and directed by Engr-in-charges. |
| 95 | S&F ISI marked 500 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm brass ball valve high pressure including dismantling of the old unserviceable water tank with all accessories complete all as specified and directed by Engr-in-charges. |
| 96 | S &F in repair 20 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed complete all as specified and directed by Engr-in-charges. |
| 97 | M&L for 100 thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in water tank plateform over roof top finished even and smooth complete all as specified and directed by Engr-in-charges. |
| 98 | Demolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work including projection of any description and any position. complete all as specified and directed by Engr-in-charges. |
| 99 | M&L for Providing precast RCC type B1 1:2:4 (using 20mm graded aggregate) as in cover slab for man holes set in CM 1:6 complete all as specified and directed by Engr-in-charges. |
| 100 | M&L 50mm thick sand stone slabs machine cut in sunshades, chajjas, shelves, cills, landings cover slabs on manholes stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness complete all as specified and directed by Engr-in-charges. |
| 101 | Taking down or up steel tubing and connection including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-charges. |
| 102 | (a) 20 mm dia |
| 103 | (b) 15 mm dia |
| 104 | S&F of galvanized Iron water tubing, medium grade, with all fittings fixed to wall complete all as specified and directed by Engr-in-charges. |
| 105 | (a) 20 mm dia |
| 106 | (b) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc |
| 107 | Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete complete all as specified and directed by Engr-in-charges. |
| 108 | Use & waste of Form work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surfaces complete all as specified and directed by Engr-in-charges. |
| 109 | Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete all as specified and directed by Engr-in-charges. |
| 110 | M & L RCC design mix M-25 using 20 mm graded stone aggregate as in slab supported on wall, roof slab, chijja and in shelve etc complete all as specified and directed by Engr-in-charges. |
| 111 | M & L RCC design Mix-25 using 20 mm graded stone aggregate as in beam, roof beam, cantilevers, lintel beam, etc. complete all as specified and directed by Engr-in-charges. |
| 112 | S & F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed by Engr-in-charges. |
| 113 | Ditto all as per item No-108 above , but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engr-in-charges. |
| 114 | S & F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed by Engr-in-charges. |
| 115 | M&L for 30 mm thick guniting in patches on to the required area on RCC columns, beams, stairs, lintels, retaining walls, sunshades, roofing slab etc. of all sizes and shapes at any heights from existing ground floor and at any locations with cement and mortar 1:2 (1 cement : 2 sand) under 2 to 2.8 Kg/Cm2 pressure after removing the damaged loose spalt concrete as specified here in before and applying one coat of rust convertor/kp-100 equivalent grade over reinforcement wherever necessary providing and tying in position 25mmx25mmx12 gauge dia wire MS welded mesh or smaller size over treated surface ready to receive grouts, curing for 10 days etc,loose spalt concrete portions by chipping, removal of dust over treated surface and applying 5mm to 10mm thick plastering in CM 1:4 to match existing surfaces and finished even and smooth including curing for 10 days etc, and removing the debris out side the MOD land in low lying areas and leveling complete all as specified and directed by Engr-in-charges. |
| 116 | M& L for roof treatment in the following stages :- (a) first Course : M&L for 15 mm thick plaster with CM 1:3 mixed surface even and smooth with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately).(b) Material and labour for UV stable single component fibre reinforced elastomeric liquid applied water proofing membrane having solid content of 55% formulated wih PU hybrid polymers and reinforcing acrylic fibres and having sun reflectivity Index (SRI) of 106. The application of the material should be done in three coat (6 hr gap after each coat) on the substrate, applying first self priming coat at ratio of damp proof ultra and water 3:1 then 2 undiluted coat of damp proof ultra obtaining coverage @1 ltr/10 sqft in two coats (10-12 hrs gap between each coat. The vital physical and chemical parameters shall be as under. Min elongationat break of 350%, crack bridging ability of 2.5 mm @650 microns thickness, resists positive hydrostatic pressure of up to 10 bars. The material shall be appliied with brush or roller, complete in all respect as per the direction of Engr-in charge/consultant. Also, proper surface preparation along with covingat corners is must. complete all as specified and directed by Engr-in-charges. Note : - 1.The authorized applicator of manufacturer shall be approved by GE. (Roof projction in front side 1.20m and in other side 0.60m) |
| 117 | M&L 50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, finishing the surface even & smooth without using extra cement including cutting of joints n.exc 3.0 mtr length complete all as specified and directed by Engr-in-charges. |
| 118 | M&L 75mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base flooring, path and sub foundation etc complete all as specified and directed by Engr-in-charges. |
| 119 | M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr-in-charges. |
| 120 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr-in-charges. |
| 121 | M&L for Repair to sunken floor with 15 mm thick plastering in CM 1:3 of internal surface with WPC than painting with bitumen grade VG 30/ 40 over a coat of bitumen primer putting 50 micron polythene than filling with PCC 1:5:10 type E-1 using 40mm graded stone aggregate and inserting 600x50 mm bore GI water pipe light grade spout incliding demolition and Removing of existing filling in sunken floor wc/ bath/ kitchen and complete all as specified and directed by Engr-in-charges. |
| 122 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /Square Metrem and resisitence to spread of flame of class A cat with property of being teRunning Metreite / borer proof , water moistur proof and fire retaident and fixing complete all as specified and directed by Engr-in-charges.Note :- including 3 Nos for each door Stainless steel 100mm long but hings with Stainlessd steel screws, 2 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainles steel handles, 125 mm long, (ISI marked) , 01 nos of helical door spring of 300 mm legth. |
| 123 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Wiremesh Door Shutter of 30 mm size comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /Square Metrem and resisitence to spread of flame of class A cat with property of being Running Metre / borer proof , water moistur proof and fire retaident and fixing complete all as specified and directed by Engr-in-charges.Note :- including 3 Nos for each door Stainless steel 100mm long but hings with Stainlessd steel screws, 2 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainles steel handles, 125 mm long, (ISI marked) , 01 nos of helical door spring of 300 mm legth. |
| 124 | Supply & fixing aluminium anodised frame/Partition/Section, made out of aluminium section / aluminium chanel, powder coated (minimum thickness of powder coating not less than 50 micron), for doors, windows, ventilators, Partition with one or more rebate including jointing cleat for fixing etc. including taking down old unserviceable frame complete all as specified and as directed by Engineer-in-Charge. |
| 125 | Supply & fixing anodised aluminium door shutter, made out of aluminium section weighing 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including aluminium hardware i.e. necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 2 Nos and aluminium hinges 04 Nos in each leaf (size of handle and hinge as directed), anodised aluminium snap beading, screws etc including fixing of glass, complete all as specified and directed by Enge-in-charges. Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ. |
| 126 | Supply & fixing anodised aluminium window/ventilator shutter side hung type without sash bars, made out of aluminium section weighing 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 No. for ventilator and 3 Nos for window each shutter) suitable handle (1 No.), including fixing of glass, complete all as specified and directed by Engineer-in-Charge.Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ as supply only. |
| 127 | Supply & fixing 4.8 mm thick sheet glass ordinary quality in squares not exceeding 0.5Square Metre in each pane and fixed with oil putty etc. as required or as directed complete all as specified & directed by Engineer-in- charge. |
| 128 | S&F for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed by Engr-in-charges. |
| 129 | M&L 12 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber or aluminium frame work complete all as specified and directed by Engr-in-charges. |
| 130 | Supply & fixing aluminium (extruded section) body door closer hydraulically regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg, ISI marked complete all as specified & directed by Engineer-in-charge. |
| 131 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets fixed in any position with nails fixed with screws complete all as specified and as directed by Engineer-in-charge |
| 132 | Supply and fixing hollow PVC lining consisting 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame (design and pattern as approved by GE/AGE) complete all as specified and as directed by Engineer-in-charge. |
| 133 | Gl frame work size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and including S&F 4mm thick asbestos E classic board complete all as specified and directed by Engr-in-charges. |
| 134 | Dismantling of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and directed by Engr-in-charges. |
| 135 | M&L for joint free non skid ceramic coloured tiles (premium quality) of size of tile exceeding 0.11 Square Metre but n.exc. 0.18 Square Metre, 6 to 7 mm thick, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed by Engr-in-charges. |
| 136 | M&L for glazed colour ceramic tiles (premium quality) of size 250X450X6-7mm / 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:3) complete all as specified and directed by Engr-in-charges. |
| 137 | M&L for light shade vitrified ceramic tiles, 9-10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0.36 Square Metre, (size & shape, shade and pattern as approved by GE), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed by Engr-in-charges. |
| 138 | All as per item No. 133 here-in-above, but as in skirting / dado/ verticle surfaces, over & including M&L 10 mm thick screed bed in cement mortar 1:4, complete all as specified and directed by Engr-in-charges. |
| 139 | Material and Labour for 18-20 mm thick Kota stone slab as approved by GE flooring, mirror polished laid over with and including 15 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Square Metre mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in- charge. |
| 140 | Material and Labour for machine cut kota stone slab as approved by GE as in vertical surfaces, 18-20 mm thick laid over with and including 10 mm thick rendering in CM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Square Metre mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in- charge. |
| 141 | Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plate cooking plate, steps, jambs,pillars, window cills, , shelves, urinal partition and like , including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge. |
| 142 | Supply & fixing 600 mm long PVC connection 15mm size with PTMT nuts complete all as specified and as directed by Engineer-in-charge. |
| 143 | Supply and fixing in replacement stop valve/angle valve cast copper alloy, chromium plated fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. |
| 144 | Supply & fixing Stainless steel Chromium Plated, soap tray size not less than 160mm, including fixing to wall with CP screws and PVC plug complete all as specified and directed by Engr-in-Charge |
| 145 | Supply and fixing in replacement 15mm bore Bib tap long body cast copper alloy, chromium plated fancy type, with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge. |
| 146 | S&F in repair brass chromium plated shower rose 70 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and directed by Engr-in-charges. |
| 147 | S & F in repairs 15 mm dia bore chromium plated quarter turn concealed stop valves of cast copper alloy fancy type with long shank & cup etc. complete all as specified and directed by Engr-in-charges. |
| 148 | Supply and fixing 1200mm x 600mm size bevelled edge mirror selected quality 6mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium frame / beading alround made of aluminium channel, complete all as specified and directed by Engineer-in-Charge. |
| 149 | Supply and fixing in replacement 19mm internal dia stainless steel drapery rod (Curtain Rod) of approved make including fenials and brackets for door and window complete all as specified and directed by Engr-in-Charge |
| 150 | Supply and fixing or laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of old GI Pipe complete all as specified. complete all as specified and as directed by Engineer-in- charge. |
| 151 | Supply and fixing or laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of old GI Pipe complete all as specified. complete all as specified and as directed by Engineer-in- charge. |
| 152 | Material and Labour in repairs Oval type vitreous china wash basin 550mm x 400mm, white, including 32mm chromium plated waste coupling and PVC waste pipe & fixing in granite slab complete all as specified and directed by Engr-in-ChargeNote : Granite shall be measured and paid separately under appropriate item of Schedule 'A' BoQ.. |
| 153 | S&F wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engr-in-charges. |
| 154 | Material and Labour in repairs vitreous china urinal of size 410mm x 380mm x 950mm, half stall type white, with grating and union for discharge pipe including CP urinal spreader and CP connection and waste pipe complete all as specified and directed by Engr-in-charges. |
| 155 | Supply and fixing in replacement 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories including 40mm overflow pipe including necessry hanging arrngement of overflow pipe upto ouside of parapet wall complete all as specified and as directed by Engineer-in-charge. Note: Ball valve valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball 20 mm bore shall be measured and paid seperately as supply and fixing under appropriate item of Schedule 'A' BoQ. |
| 156 | Supply and Fixing in replacement Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge. |
| 157 | Supply & fixing in replacement Gun metal, globe or 20mm bore gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. |
| 158 | Supply & fixing in replacement Gun metal, globe or 25mm bore gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. |
| 159 | Supply and fixing 110 mm bore PVC (SWR) pipe type -B single socketed in any length with rubber ring joint fixed laid in trenches or fixed to walls with projrcted MS clamps of size 25x03mm at 1.2 mtr interval, and making good in cm 1:3 at opening including Taking down old AC eaves gutters and rainwater pipes (anysize and pettern), including all fittings, complete all as specified and directed by Engr-in-charges.. |
| 160 | S & F 110 mm bore, PVC (SWR) fittings type -B such as bends, tee, 'Y' etc, type 'B' fixed to PVC pipes, complete all as specified and directed by Engr-in-charges. |
| 161 | Supply and fixing 75 mm bore PVC (SWR) pipe type -B single socketed in any length with rubber ring joint fixed to walls with projrcted MS clamps of size 25x03mm at 1.2 mtr interval, and making good in cm 1:3 at opening including Taking down old AC eaves gutters and rainwater pipes (anysize and pettern), including all fittings, complete all as specified and directed by Engr-in-charges. |
| 162 | S & F 75 mm bore, PVC (SWR) fittings type -B such as bends, tee, 'y' etc, Type 'B'' fixed to PVC pipes, complete all as specified and directed by Engr-in-charges. |
| 163 | S&F 110 mm dia of long neck PVC SWR P trap type -B with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed by Engr-in-charges. |
| 164 | S&F 75mm dia of long neck PVC SWR floor trap type -B with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed by Engr-in-charges. |
| 165 | Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern, EWC) P Trap white clour (excluding flushing cistern and flush pipe) including connection to drain etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge. |
| 166 | Supply & fixing in repair PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed by Engr-in-charges. |
| 167 | Supply & fixing in replacement Swan Neck Pillar tap cast copper alloy with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge. |
| 168 | Demolition of cement concrete in roof padding damaged /loosed cement concrete /bricks tiles from roof /terrace to a depth of average 50 mm including dismantling of existing treatment with APP membrane if any cleaning with water and depositng of debris outside MoD land complete all as specified and directed by Engr-in-charges. |
| 169 | M&L for Cutting grooves in roof slab, brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed by Engr-in-charges. |
| 170 | M&L For PCC Padding to matain roof Slope and benching with PCC (1:2:4) type B0 using WPC as per manufacturer's instruction along side wall adjoining to roof in concave shape complete all as specified and directed by Engr-in-charges. |
| 171 | M&L rendering 20mm thick in CM 1:3 with mixing WPC as per manufacture instructions on roof for roof surfaces treatment complete all as specified and directed by Engr-in-charges.Note : WPC will be measured and paid seprately as supply only) |
| 172 | Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate complete all as specified and as directed by Engineer-in-charge.The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill. |
| 173 | Material and labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or tobatter complete all as specified and as directed by Engineer-in-charge. |
| 174 | M&L for Water proofing tratment to existing roof/terrace using Single component, acrylic based, flexible, micro fibre reinforced waterproofing and heat reflective coating system. the treatment shall be carried out as per the manufacturers instructions and shall include as per following procedure :- complete all as specified and directed by Engr-in-charges.(a) Preparation of substrate and cleaning it off all loose and triable by mechanical means(b) Open the cracks lines to form , V grooves with cutter/hammer/chisel up to 5-10mm and filling with crack filler and PU sealant.(c) application of primer coat @ 0.2 to 0.3 kg/ sqm followed by the first coat @ 0.75kg/ Sqm.(d) The second coat shall be applied @ 0.75 kg / Sqm and laying of reinforced with fabric re-inforcement between the first and second coat.(e) The top coat of primer shall be applied after the second coat dries off @ 0.05-0.08 Kg per Sqm.(f) The material shall adhere to following specifications:- TECHNICAL SPECIFICATION OF MATERIALTensile Strength 1.5 MPa ASTM D412Elongation at Break > 200% ASTM D412Adhesion in Peel > 1.5 MPa (on concrete substrate) EN 1542Crack Bridging Ability Passes upto 3.2mm Width ASTM C1305Permeability to Water Vapour Passes IS 2645Water Vapour Transimission ~ 23 g/m²/24hr ASTM E96Water Absorption < 10% ( by Mass) ASTM D570Microbiological Resistance No Algae & Fungal Growth ASTM D5590Solar Reflectance Index 102 ASTM E1980.Note : Complete material (in bucket) shall be procured in bulk and kept in lock and key in custody of JE and subdivision store.Note : The Manufacture's company should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the particular manufacturer can only be used with official approval from manufacturer |
| 175 | S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias, Ceiling etc. complete all as specified and directed by Engr-in-charges. |
| 176 | M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 complete all as specified and directed by Engr-in-charges. |
| 177 | M&L precast cement concrete block masonry using PCC 1:3:6, type B-1 solid blocks, 10 cm in width and setting in cement mortar 1:4, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed by Engr-in-charges. |
| 178 | Material and labour for preparing newly plastered or concrete surface of ceiling by sand papering or by the other mean and after preparing the surfaces and applying two coat of white wash with (paint brush /with roller ) complete all as specified and directed by Engr-in-charges. |
| 179 | Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed by Engr-in-charges. |
| 180 | M&L for Applying acrylic thick wall care putty on internal and external surfaces of walls/ceilings (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed by Engr-in-charges. |
| 181 | Material and labour for preparation of new plastered/ concrete surface of wall / Pillars / cornices and applying 1.5mm - 2.5mm thick one coat of cement based wall care putty to complete surface of wall to make the surface even and smooth by using sander machine (With provision of dust sucking) upto entire and applying two coats of interior oil emulsion paint (with roller brush ) complete all as specified and as directed by Engineer-in-Charge |
| 182 | M&L for Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed by Engr-in-charges. |
| 183 | M&L for applying two coat of cement base paint on old surfaces including preparation complete all as specified and directed by Engr-in-charges. |
| 184 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, cables, pipes etc. not exceeding 10 Square Metre on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engr-in-charges. |
| 185 | Demolition and breaking up drain pipes SGSW, AC or reinforced concrete pipe of 150 mm bore pipes, complete all as specified and directed by Engineer-in-Charge. |
| 186 | Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in concrete bed of SGSW drain pipes of 150 mm bore, laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested including foRunning Metre work complete all as specified and as directed by Engineer-in-charge. Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be outer diameter of drain pipes (not of sockets / collar) plus 30cm. |
| 187 | Material and Labour for 150 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed in CM (1:1) including testing complete all as specified and directed by Engr-in-charges. Note:- Excavation and earthwork shall be measured separately. |
| 188 | Material & labour for Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for benching of manhole, coping etc. complete all as specified and as directed by Engineer-in-charge. |
| 189 | Returning filling in any type of soil, including spreading, levelling,watering and well ramming in layer not exceeding 25 cm in each layer, complete all as specified and directed by Engr-in-charges. |
| 190 | Removing excavated material as in all kind of Soils not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-charges. |
| 191 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engr-in-Charge |
| 192 | Material and labour Cutting into existing manholes for connecting new drains, making good to pipe on of internal dia of pipe 150mm and rendering, cutting out existing benching for and foRunning Metreing branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l using 20mm graded stone aggregates smooth finished, and refoRunning Metreing benching as required as required complete all as specified and directed by Engr-in-Charge |
| 193 | Demolition stone/marble slabs of any description or thickness as in floors/ cooking platform /steps etc. laid bedded and pointed in any mortar including removing rubbish material from the site complete all as specified and as directed by Engineer-in-charge |
| 194 | Supply and fixing for mild steel cupboard shutter two leaves with frame of 20 gauges MS sheet (all around) and leaves of 21 gauge MS Sheet ( all as per Godrej Pattern) with three way locking arrangement with brass lock with CP handle with duplicate key including two coats of spray painting over a coat or red oxide primer complete fixed in existing cupboard, fixed with necessary nuts, bolts including embedding in PCC 1:2:4 (Area's opening shall be measured) complete all as specified and directed by Engr-in-charges. |
| 195 | Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete all as specified and directed by Engr-in-charges. |
| 196 | Taking down carefully sub-main wiring (with DB any type) of any size and making good to ther disturbed surfaces to match the existing complete all as specified and directed by Engr-in-charges. |
| 197 | M & L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and make good the distrubed surfaces ) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, all as specified, directed and shown on drgs for The rates of chase cutting on wall done concealed conduit and steel terminal boxes are included in the unit rates complete all as specified and directed by Engr-in-charges. (a) One light point controlled by one, one way switch |
| 198 | (b) One fan /Exhaust fan, point controlled by one way switch. |
| 199 | (c) One socket outlet 3 pin 6 Amps on same board |
| 200 | (d) One socket outlet 3 pin 6 Amp on independent board |
| 201 | (e) One bell point controlled by one bell push. |
| 202 | (f) One light point controlled by two, two-way switches |
| 203 | All as per item No 193 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board . complete all as specified and directed by Engr-in-charges. |
| 204 | All as per srl item no. 193 here-in-before but with 4 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for indpendent 15 Amp point. complete all as specified and directed by Engr-in-charges. |
| 205 | S&F switch piano flush type single pole one way 6 Amp ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 206 | Supply and fixing switch piano flush type 5/6 amp single pole two way 230 V complete all as specified and directed by Engr-in-charges. |
| 207 | S & F Bell, ding dong type AC, 230 volts, single pole complete all as specified and directed by Engr-in-charges. |
| 208 | S & F Bell push 5/6 Amps, flush type complete all as specified and directed by Engr-in-charges. |
| 209 | S&F switch piano flush type single pole one way 16 Amp ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 210 | S&F socket outlet 2 in 1, 3 pin, 6 Amp flush type ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 211 | S&F socket outlet 2 in 1, 6 pin, 6 and 16 amp flush type ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 212 | M & L for Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body. complete all as specified and directed by Engr-in-charges. |
| 213 | M & L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting. complete all as specified and directed by Engr-in-charges. |
| 214 | S&F LED lamp 9 W complete all as specified and directed by the Engineer-in-Charge. |
| 215 | Supply and fix socket type electonic fan regulator flush type ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 216 | Taking down and refixing / Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engr-in-charges. |
| 217 | Taking down and re-fixing only exhaust fan (M.D.supply) and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed by Engr-in-charges. |
| 218 | S&F sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete all as specified and directed by Engr-in-charges. |
| 219 | S&F sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door DB's suitable for provn for a MCB One TPN 63 Amps as incoming and 4 Nos of SPN 63 Amps outgoing complete all as specified and directed by Engr-in-charge. Note : MCB/RCCB TPN/SPN/SP measured and paid saperatly. |
| 220 | Supply and Fix MCB Single pole\\"C\\" series 5-32 Amps ISI marked. complete all as specified and directed by Engr-in-charges. |
| 221 | Supply and Fix MCB Single pole & neutral \\"C\\" series 63 Amps ISI marked. complete all as specified and directed by Engr-in-charges. |
| 222 | Supply and fixing MCB TPN C Curve 63 Amps complete all as specified and directed by Engr-in-charges. |
| 223 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charges. |
| 224 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed by Engr-in-charges. |
| 225 | S&F in LED light fitting 1 X 12 watt (2feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed by Engr-in-charges. |
| 226 | Supply and fixing LED street light fitting 36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified and directed by Engr-in-charges. |
| 227 | M&Lfor sub main wiring with PVC insulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable passing through in and including PVC conduit , concealing in walls (by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. complete all as specified and directed by Engr-in-charges. Note :- Two runs of cable 6 Sqmm and One run of 6 Sqmm along with conduit shall be measured as one unit length. |
| 228 | Taking down and re-fixing only incl connecting electric meters complete all as specified and directed by Engr-in-charges. |
| 229 | S&F of Heavy duty Exhaust fan 300 mm sweep, 900 RPM, including louvers with cutting chases on brick wall and grounting with nut bolts complete all as specified and directed by Engr-in-charge. |
| 230 | S&F electric storage water heater of capacity 25 litres BEE 5 star rated including proper installing arrangment on wall surface with suitable Anchor bolt fatser and Geyser connections for hot and cold water supply made of stainless steel wire braided connrtector with chrome finish heavy duty nuts of 15mm size with suitable lengh etc complete all as specified and directed by Engr-in-charges. |
| 231 | M&L for Earthing complete with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion . Note : Rates are deemed to be included for necessary earth work , earth pit with RCC cover of size 300X300 x25 mm etc complete all as specified and directed by Engr-in-charges. |
| 232 | Supply, laying testing in trenches LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,croos sectional area 16 sqmm 4 core complete all as specified and directed by Engr-in-charges. Note : Earth work and brick work measured and paid separately |
| 233 | Supply and laying Un reinforced Precast concrete cable cover, flat size 300 mm x 180 mm x 40mm complete all as specified and directed by Engr-in-charges. |
| 234 | Supply and lay sand for sand cushioning for cable protection in trenches all as directed and specified in SSR Part -1. complete all as specified and directed by Engr-in-charges. Note:. for the purpose of payment punned thickness will be measured. |
| 235 | Supply and fix GI tubing medium grade of 40 mm dia for cable protection complete all as specified and directed by Engr-in-charges. |
| 236 | Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site complete all as specified and directed by Engr-in-charges. |
| 237 | S&F Modular switch flush type single pole one way 6 Amp ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 238 | S&F Modular switch flush type single pole one way 16 Amp ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 239 | Supply and fix remote bell, AC 230 volts, single pole complete all as specified and directed by Engr-in-charges. |
| 240 | S&F Modular socket outlet 2 in 1, 3 pin, 6 Amp, 230 Volts flush type, ISI Marked . complete all as specified and directed by Engr-in-charges. |
| 241 | S&F Modular socket outlet 2 in 1, 6 pin, 5 and 16 amp flush type, 230 Volts ISI Marked complete all as specified and directed by Engr-in-charges. |
| 242 | Supply and fixing replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder Warm White, including,copper conductor cable of suitable size from ceiling rose complete , 4 ft long complete all as specified and directed by Engr-in-charges. |
| 243 | S&F in replacement bldg security LED Light Luminaire of 35 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 40 mm bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable complete all as specified and directed by Engr-in-charges. |
| 244 | Supply and fixing replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type, with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charges. |
| 245 | Supply and fix in repair 2'x2' energy efficient recess mounting 36 watt LED lumanariesWarm White fixing for POP/snapgrid ceiling housing including LED lamps other accessories and necessary electric connection complete all as specified and directed by Engr-in-charges. |
| 246 | S&F in replacement Decorative, wall mounting fitting brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp warm White B22 base complete all as specified and directed by Engr-in-charges. |
| 247 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-charges. |
| 248 | S&F Vertical Distribution Board, double Door, suitable for 'A' Frame FP MCCB 100A made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s and MCCB etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed by Engr-in-charges.Note : MCCB & MCB will be measured and paid separately under respective items |
| 249 | S&F MCCB 'A' Frame thermal adjustable magnetic setting Ics=75%25 kva,415 V,100 Amp,4 pole MCCB with over load and short circuit protection , complete all as specified and directed by Engr-in-charges. |
| 250 | S&F MCB, B Curve type, 10 kA, 63Amp, SPN with over load and short circuit protection, complete all as specified and directed by Engr-in-charges. |
| 251 | S&F MCB, B Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as specified and directed by Engr-in-charges. |
| 252 | S&F sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 10 MCB SP as out going SPN 12 way complete all as specified and directed by Engr-in-charge. |
| 253 | M&L for sub main wiring with 2 run of 4 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 25 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as specified and directed by Engr-in-charges.Note:- Two run of 4 Sq.mm. and one run of 4 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces. |
| 254 | Supply, laying testing LT UG XLPE in trenches/saddle clamping on wall (as per site requirement insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,croos sectional area 50 sqmm 4 core complete all as specified and directed by Engr-in-charges. Note : Earth work and brick work measured and paid separately |
| 255 | S&F exhaust fan, PVC body, AC single phase 250 mm sweep complete with louvers including fixing/grouting of frame & connecting with & including 3 core PVC insulated copper conductor flexible cable of size 23/0.0076 (or eq. Size in mm) from ceiling rose to fan complete all as specified and directed by Engr-in-charges. |
| 256 | Supply and fixing of sheet metal enclosure SPN with a two pin earth plug and socket with metal cladd top and one MCB,SP 20amps capacity complete all as specified and directed by Engr-in-charges. |
| 257 | S & F heavy duty metal hook for ceiling fan fastener Hook 12 mm size complete all as specified and directed by Engr-in-charges. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
