|
| 1 | M&L for preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7/9 inch to make the surfaces free from dust, loose paints etc and applying two coats of oil bound distemper over a coat of primer including applying one or more coat of wall care putty with the help of fully automatic airless spray machine of putty to a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 2 | M & L for preparing old decorated surfaces of wall including cornices, pilasters etc, including bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of oil bound/acrilic distemper by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr complete all as specified and directed.Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 3 | M & L for preparing old decorated surfaces of walls including cornices, pilasters etc by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed. |
| 4 | M & L for preparing old decorated surfaces of ceiling including cornices, pilasters etc by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed. |
| 5 | M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 6 | M & L for Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed. |
| 7 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land complete all as specified and directed |
| 8 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 9 | M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and fair without using extra cement complete all as specified and directed. |
| 10 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 11 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. |
| 12 | M & L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and directed. |
| 13 | M & L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 14 | M&L for preparing old exterior emulsion painted surfaces of walls by washing, rubbing down stopping of painted surfaces and applying one coat of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, having dart pick up resistant, silicon enhanced, UV resistant and PU enhanced property including necessary scaffolding, complete all as specified and as directed. Note :- (i) Painting work shall be carried out according to Smart Painting procedure mentioned in PS |
| 15 | S & F in repair 25 mm dia, PVC coated MS curtain rod with bracket, end ball type of superior quality complete all as specified and directed. |
| 16 | S & F in repairs, fancy type wall mounted bevel edged looking mirror of size 900x600 mm fixed with stainless steel studs complete all as specified and directed. |
| 17 | S & F in repairs, 15 mm bore, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 18 | S & F in repairs, plastic water closet, Seat and Cover for pedestal pan, white / black, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 19 | S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed. |
| 20 | S & F in repair 125 mm size, shower rose, brass chromium plated, swival type, complete all as specified and directed. |
| 21 | S & F in repairs, CP, Wall Mixer with Provision for overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete all as specified and directed. |
| 22 | S & F in repair 15 mm bore, CP health faucet with wall hook and 1 m long flexible tube with all accessories complete all as specified and directed. |
| 23 | S & F in repairs, 0.85 mm thick Stainless steel, kitchen plate rack of size 786X914X254 mm as per existing design and specification as approved complete all as specified and directed. |
| 24 | S & F in repairs 20 mm dia, stainless steel, rod, heavy duty, 1.5 to 2mm thick fixed to cupboard/wall etc including stainless steel bracket of superior quality complete all as specified and directed. |
| 25 | Dismantling timber scantlings 40 Sq.cm and over in section, in any position complete all as specified and directed. |
| 26 | Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed. |
| 27 | M & L for factory made ready to install, non toxic-lead & cadmium free, single extruded, 3 side prelam, solid (non hollow), PVC door frame (single rebated) of size 75x40mm and having water proof, termite proof, fire retardent and with excellent screw holding capacity, mitred cut at two corners and joined with MS screws on each side and fixed to the existing wall using (10x100mm) long MS screws to through the frame by using PVC fastners, minimum 4 Nos of MS screws to be provided for each vertical post and minimum 2 Nos MS screws to be provided on horizontal members complete all as specified and directed. |
| 28 | M & L for 18mm thick, factory made ready to install, Non-toxic, Lead & Cadmium free, single extruded, water proof, termite proof, fire retardent, excellent screw holding capacity, solid PVC board, one side decorative choice lamination and other side balancing white as in cupboard shutter, fixed to door frame with and including continuous Piano hinges of stainless steel, bright finish or Electrogalvanised and width of flaps 40mm (when open) and stainless steel screw including lipping the cut edges with same materials finish complete all as specified and directed. |
| 29 | M & L for 18mm thick, factory made ready to install, Non-toxic, Lead & Cadmium free, single extruded, water proof, termite proof, fire retardent, excellent screw holding capacity, solid PVC board, one side decorative choice lamination and other side balancing white as in cupboard shelves fixed to and including PVC guide rail and stainless steel screw including lipping the cut edges with same materials finish complete all as specified and directed. |
| 30 | M&L for anti termite treatment at points of contact of wood/PVC work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed. |
| 31 | S & F in repair 18/19 mm thick, Prelaminated Particle Board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and providing with 6 mm thick teakwood lipping around and polishing the lipping complete all as specified and as directed. |
| 32 | S & F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 40mm width of flape when open complete all as specified and directed. |
| 33 | S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished fixed with screws complete all as specified and directed. |
| 34 | S & F 150 mm size, stainless steel designer pull handle, fabricated type polished complete all as specified and directed. |
| 35 | S & F 100 mm size, stainless steel designer pull handle, fabricated type polished complete all as specified and directed. |
| 36 | M&L for preparation of new platered surface of wall and applying two coats of oil bound distemper over a coat of primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 37 | M&L for preparation of old decorated, damp affected wall surface by complete removal of existing treatment, washing, rubbing, stopping etc and apply the following treatments :- (a) Apply injection sealer by providing holes of 6mm dia and 50 mm deep at an angle of 45 degree. (b) Apply a coat of advance dammp proof protective wall sealer (c) Apply one or more coat of water proof putty to a smooth surface including making good any undulations on the surfaces (d) Apply a coat of acylic primer over the putty surface (e) Two coats of oil bound washable distemper complete all as specified and as directed. Make : Berger,Asian Paint, J&N ,Shalimar Note :- (i) Painting work shall be carried out according to Smart Painting procedure mentioned in PS (ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for a clean environment certified by the Paint manufacturer) |
| 38 | S & F in repair 5mm thick, bevelled edge looking mirror of size 1500mmX600mm of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and 1st class hard wood designer frame around the mirror with pretruded stainless steel metal studs and fixed to wooden plug with chromiun plated brass screws and cup washers complete all as specified and directed. |
| 39 | M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete complete all as specified and directed. |
| 40 | M & L for post construction Antitermite treatment Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 41 | S & F in repairs, acrylic PVC bathroom cabinet of size 350 x 450x100 mm with openable shutter fixed with looking mirror of selected quality and with suitable shelves in side the cabinet of superior quality as approved. (Make: Prayag Cat No. 551 or equivelant of make as per manufacturer's list) |
| 42 | S & F in repairs cold rolled nickel plated steel O crank soft closing concealed hinge (15-22mm) including necessary fixing arrangement to shutter complete all as specified and directed. Please Enable Macros to View BoQ information |
