Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trolly and transporting to the embankment locations with all lifts and leads (b) Disposal/carraige additional beyond 450m upto 1Km ( For Dry flush Removal) |
| 2 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc.including dismembering and stacking within 50 metres lead. |
| 3 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. |
| 4 | Scraping (a) White wash and colour wash |
| 5 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled (a) Doors of area 3 sqm and below. |
| 6 | Dismantling stone pitching or soling (a) Stone pitching dry |
| 7 | Dismantling stone masonry/Rubble masonry including stacking of serviceable materials and disposal of unserviceable materials. (b) In cement |
| 8 | Earth work excavation in ordinary soil, exclusive of compensation of earth:- (c) Earth work undressed with a combined lead upto 15 metres including breaking of clods. |
| 9 | Cement concrete 1:2:4 (a) With stone ballast or shingle (ii)mixing by mechanical means using concrete mixer volumetric type |
| 10 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 11 | Cement concrete 1:4:8 (b) With stone aggregate 40mm gauge (i) mixing by manual means |
| 12 | (i) mixing by mechanical means using concrete mixer volumetric type |
| 13 | Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines. |
| 14 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. |
| 15 | Cement concrete 1:3:6 (a) with stone ballast or Shingle (ii)mixing by mechanical means using concrete mixer volumetric type |
| 16 | ROAD WORK Precast Cement Concrete Kerb (a) Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications |
| 17 | WHITE WASHING, DISTEMPERING, PAINTING & POLISHING Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 18 | Finishing walls with cement based water solubleexterior paint such as snowcem, robbiacem etc. On old work one coat to give an even shade |
| 19 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 20 | Painting new letters and figures of black synthetic enamel paint to an even shade |
| 21 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 22 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 23 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 24 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade |
| 25 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 26 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using acyllic wall putty by applying two or more coats to get required finish including priming coat to make an even surface before applying acrylic wall putty on new tlastered surface as per specification. |
| 27 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. |
| 28 | Painting two or more coats with aluminum paint to give an even shade excluding priming coat |
| 29 | MISCELLANEOUS Cutting down trees, filling holes and levelling of ground, lopping branches trimming, removal not exceeding 100 m stacking clearing site. (a) girth up to 60 cm |
| 30 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 31 | HOISTING ROOFING AND WATER PROOFING Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing |
| 32 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. |
| 33 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socketed (working pressure 4 kgf / cm²) conforming to IS : 4985, including fixing with MS clamps. (i) U-PVC pipes (working pressure 4 kgf. / sqcm) pipe 110 mm dia. |
| 34 | Providing and fixing 110 mm dia. U.P.V.C end for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. (i) UPVC 110 mm bend |
| 35 | Hoisting R.C.C. lintel and placing in position |
| 36 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 |
| 37 | PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge (iii) Overall size 2.5sq.mm (Un-sheathed) |
| 38 | MINIATURE CIRCUIT BREAKERS/ RCBO‘s/ RCCB‘s: MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB‘s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs: (xiv)MCB Four Pole 6-32amp. (10kA, Curve-C) |
| 39 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB‘s/ RCBO‘s/ RCCB‘s: Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector,color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO‘s/ RCCB‘s in the distribution board (For SP&N distribution board with provision DP MCB‘s/ RCCB‘s/ RCBO‘s as incomer and SP MCB‘s as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB‘s/ RCCB‘s/ RCBO‘s as incomer and SP MCB‘s as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- (iii) SP&N Double Door Distribution Board 12 way each |
| 40 | XLPE INSULATED LT CABLES: XLPE INSULATED UN-ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- (i) Overall size 6sq.mm (2Core) Un-armoured (Loose) |
| 41 | (xxxvii)Overall size 16sq.mm (4Core) Un-armoured (Loose) |
| 42 | (34.12) PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (ii) Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) |
| 43 | (xxv)Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:- (b)PVC Flexible Pipe 25mm dia. |
| 44 | (xxvi) Supply and erection of Compression glands, Locking arrangement, Check-nuts for PVC flexible pipe complete with as required:- ((a))PVC compression Socket gland 20mm dia. |
| 45 | GI PIPE POLES & BRACKETS: GI PIPE POLES: Supply and erection of G.I. pipe ‘A’ quality of suitable length and dia. confirming to IS:1239 (Part-I) 1979, including fixing up to a given depth below G/L, the hole of excavation about 30cm dia. and given depth to be filled in up to 15cm below G/L with 1:2:4 cement concrete including painting of pole with two coats of approved aluminium paint as required:- ((ii))G.I. Pipe Pole 6.1 metre Long, Dia. 80mm, Planting Depth 120cm with Pit Depth 135cm. |
| 46 | SINGLE ARM BRACKETS FOR GI PIPE POLE: Supply and erection of G.I. Pipe (A-Class) Single arm bracket of suitable length to give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the existing surface/ wall with 2nos. MS flat clamp 25mm x 5mm, 30cm long and 4nos. fastner 10mm x 75mm long with two coats of an approved aluminium paint complete in all respect as approved by the Engineer-in-charge at site:- (a) Single Arm Bracket 1 metre Long G.I. Pipe 40mm Dia. |
| 47 | AUTOMATIC VOLTAGE STABLIZER, TIMER: AUTOMATIC VOLTAGE STABLIZER: Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size.There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:- |
| 48 | PAINTING INCLUDING LABOUR AND MATERIAL: (i) Painting of Ceiling fan complete with blades, canopy and suspension rod with two coats of approved paint (With brush). |
| 49 | ERECTION, REPAIR AND REWINDING OF FANS: ERECTION OF FANS: (i)Erection of Ceiling/ Cabin/ Exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete:- (a) Erection of Ceiling fan |
| 50 | (c) Erection of Exhaust fan with louver shutter on the wall/ window grill |
| 51 | RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½\\"deep for walls and 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface) ((ii)) Wiring light point |
| 52 | ((iv))Wiring 6Amp. wall socket point |
| 53 | ((v)) Wiring 6Amp. Plug control comprising wall socket point |
| 54 | ((vi))Wiring 16/20Amp power plug control point |
| 55 | ((vii))Wiring light point without control switch. |
| 56 | ((viii))Wiring light point with double control switches. |
| 57 | SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:- ((xvi))16/20amp. Universal Modular Shuttered Socket (two Module) |
| 58 | (xxxvi) \\"CAPACITORS & BALL BEARINGS: Supply and erection of Capacitors of different capacity for ceiling fans, exhaust fan & street light fittings etc.:- (d) Capacitor 6 μF |
| 59 | ((iii)) Single Pole 16/20amp.Switch with indicator Flush Piano type |
| 60 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Steptype electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- ((iii))Wiring call-bell point |
| 61 | ((vi))Wiring 16/20Amp.power plug control point |
| 62 | FLOORING & DADOS Providing and laying 60 mm thick factory made cement concrete interlockingp aver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro- hydraulic compaction machine and of approved size and design/shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge IS code :15658(2006) for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths). |
| 63 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and\ matching pigment etc., completewhite cement slurry in joints including corners angles and beading. |
| 64 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (a) Size 600x600 mm |
| 65 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40 mm gaugw and 100mm fine sand and 100mm sand filling using mechanical mixer for mixing of material |
| 66 | Providing and fixing1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 67 | PLASTERING & POINTING 12.5 mm thick cement plaster 1:4 |
| 68 | MAINTENANCE OF BUILDINGS AND FURNITURE Providing and fixing curtain rail 1.90cm chrome-plated with end bracket. Including sockets and brackets |
| 69 | Renewing glass panes with putty and nails wherever necessary ((a)) Glass Panes weighing 8.44 Kg/sqm |
| 70 | Rough grassing including uprooting rank vegetation and weeds by digging the area to a depth of 15 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, mixing fertilizer, levelling and dressing for planting new grass, including disposal of all rubbish with all leads and lifts, planting doob grass in rows 15 cm apart in both directions, watering and maintenance till first mowing. |
| 71 | Supply and installation of garden bench ((a)) Chair type garden bench with L-shaped sides made of reinforced concrete (M-30), thickness 100 mm overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. Reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation |
| 72 | WATER SUPPLY Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete (d) 32mm i/d |
| 73 | Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested,equipment as requried such as hand boring machine and its accessory, transportation to site and vice versa etc. complete in all respect. (a) Boring with 150mm id Housing Pipe (1) Upto 150 m depth BGL. |
| 74 | Supplying, lowering of MS Pipe as per IS:4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore. ((a)) 100mm nominal diameter (weight 14.5 kg per metre) 5.40 mm thickness |
| 75 | Supplying, lowering & fixing of M.S Special socket to connect S.S Strainer to M.S Pipe duly welded with suitable grade welding electrode complete in all respect. ((a)) 100mm internal diameter |
| 76 | Supplying & Fixing of bail plug of M.S pipe complete with inverted U-hook attched to the bottom plug complete in all respect. ((a)) 100mm internal diameter (weight 14.5 kg per metre) 5.40 mm thickness |
| 77 | Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect. ((a)) 100mm internal diameter |
| 78 | Development and Stabilizing of the tubewell with submersible pump of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge. |
| 79 | Supplying at site of gravel quarry site of gravel of 1/16\\" to 1/8\\" sizes including pouring and packing in the annular space between the pipes assembly and the bore.The gravel should be free from, dust,dirt, or the vegetable manner as per IS 4097/1967 with latest amendments (to be paid as per actual length of pipe) |
| 80 | EARTH WORK (a(i))Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres |
| 81 | Earth work in excavation in foundations trenches etc. In all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 82 | Apply two coats of paint using metallic primer for Dholbaha Dam Spillway bridge including preparing surface for paint with labour charges completein all respects. |
| 83 | Providing and installation of sign boards complete in all respects. 10 No. sign board up to 5‘x5‘ 2 No. Information board 10‘x5‘ |
| 84 | Restoration of 4 no. level gauge at site,including painting at levelling staff(Reading to centimeters)with 2 coats of synthetic enamel paint(30 cms wide reading) |
| 85 | Development of 10 KW on Grid Solar PV Power Plant i/c Solar Modules, Module Mounting Structure, Solar invertor, Wires, LA Earthing, ACDB & DCDB (Switches), Civil Works Pile Foundation, Meter & Liaoning, Structure Design. |
| 86 | 1. Solar Hybrid InvertorCapacity - 2 KW 2. Tubular Batteries Capacity - 150 Ah x 4 No. 3. Accessories & Installation i/c Battery Rack, Wiring, Fuses, breakers, Connectors, etc 4. Labour & Installation charges |
| 87 | 50 Watt LED Flood Light |
| 88 | For cleats, Nuts & Bolts |
| 89 | Supplying, Fixing & lowering of Stainless Steel Cage type wire wound screen as per relevant IS Code or ISI marked duly welded with suitable grade S.S welding electrode to lower the strainer into tubewell bore 100mm Steel Strainer ( Slot size 0.15/0.20 mm) 5.0 mm thickness |
| 90 | Supply and lowering of submersible pump set 2 H.P/ 30 stages at site of work complete in all respect as per instructions of Engineer-in-charge. |
| 91 | Supply and fixing of submersible cable 4 mm square size at site of wor complete in all respect as per instructions of Engineer-in -charge. |
| 92 | Supply and fixing of control panel 2 H.P complete in all respect as per instructions of Engineer-in -charge. |
| 93 | Supply and fixing of Jain & nipple for pump complete in all respect as per instructions of Engineer-in -charge |
| 94 | Supplying and Fixing uPVC Equal Tee of 4kgf/cm2 Pressure confirming to relevant IS Code with latest Amendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge - 110x110x110mm. |
| 95 | CPVC Socket 20 mm |
| 96 | CPVC Tee 20 mm |
| 97 | CPVC Bend 20 mm |
| 98 | 12\\" Exhaust Fan |
| 99 | 18 W L.E.D Bulb |
| 100 | Brick Ballast well or over burnt, broken & screened through a 32 x 32 square mesh screen laid consolidated & rammed to a finished thickness of 75 mm |
| 101 | RIVER AND CANAL PROTECTION WORK Grouting stone filling or pitching:- ((b))With mortar. |
| 102 | Stone or Kankar block pitching:- ((b))On slopes of guide bandh and protection works |
| 103 | Filling stone or spall:- ((b)) On side slopes behind pitching. |
| 104 | Bridges- Foundations & Sub- Structure Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and Technical Specifications (B) Coursed rubble masonry (first sort ) |
| 105 | STONE MASONRY (C) SQUARED OR RECTANGULAR PILARS OF RUBBLE MASONRY Boulder masonry in cement mortar (1:6) in foundations and plinth. |
| 106 | Providing and fixing barbed wire including straightening with End post and fixing with GI Staples, turns Buckles etc.Complete in all respect as per Design and instruction of Engineer in Charge. |
| 107 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth. |
| 108 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position |
| 109 | Supplying, Fixing & lowering of Stainless Steel Socket as per relevant IS Code or ISI marked duly welded with suitable grade S.S welding electrode to lower the strainer into tubewell bore complete in all respect.:- 100 mm internal Diameter |
| 110 | Nuts and Bolts of all sizes and length required complete in all respect as per instructions o Engineer-in -charge |
| 111 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. |
| 112 | Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18gauge (1.25mm) thick steelsheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter. |
| 113 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cister ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 114 | Providing and fixing jet spray with 2-6\\" long PVC pipe (a))With C.P. Brass nut |
| 115 | Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. (i))Vitreous chinaware standard white pedestal for wash hand basin. |
| 116 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in-Charge) ((b))Size 550mmx400mm |
| 117 | Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect. ((a))C.P. brass toilet paper holder |
| 118 | (B) )Vitreous white Chinaware Partition (ii)) Large partition size 75 x 16.5 x 36.5 cm |
| 119 | First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth |
| 120 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. |
| 121 | Supplying, fitting and placing HYSD bar reinforcement in substructure complete as per drawing and Technical Specifications. |
| 122 | Teak wood wire gauge shutters without spring (Single Leaf |
| 123 | WOOD WORK Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge |
| 124 | 5pin 6amp. Wall Socket Flush Piano type |
| 125 | Step type Fan Regulator Flush Piano type (Socket size) |
| 126 | 6/10amp. One Way Modular Switch (One Module) |
| 127 | Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc: -Modular Cover Frame One or Two Module |
| 128 | Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:-Modular Cover Frame Six Module |
| 129 | Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M,6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):-Powder Coated Concealed Metal Box with Brass Lugs One/Two Module |
| 130 | Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):-Powder Coated Concealed Metal Box with Brass Lugs Six Module |
| 131 | Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265 x 315 x 440 mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect. |
| 132 | Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge |
| 133 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-inCharge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threade fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge:- SDR 11 CPVC pipes & fittings 20mm o/d |
| 134 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-inCharge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. CPVC SDR 11 Pipe & fitting 25mm o/d |
| 135 | Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good the same & finishing according to existing finish where required:Through floor or roof 15.00cm thick |
| 136 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. (a) Size 75 mm x 75 mm |
| 137 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect:- C.P. brass Bib cock long nose/ long body foam flow without flange |
| 138 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.Brass Bib cock/Stop cock 15mm x 400gm |
| 139 | Providing & Fixing in position mirror of superior glass Size 1500mm x600mm or any other required size (of approved quality) and of required shape and size with high quality polystyrene moulding frame of 40 to 50mm size (of approved quality and shade) with 4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P. brass screws and washers complete in all respect |
| 140 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. (ii) Double Layer Tanks |
| 141 | Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 142 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 - (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35mm thick |
| 143 | Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge) |
| 144 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P.brass 15mm Angle valve without flange |
| 145 | Providing and fixing in position Vitreous chinawear lavatory suites of approved(To the approval of engineer in charge) consisting of c.p. brass waste 32mm dia ,with one C.P. brass pillar tap including rack bolt, screw pair, 115mm long complete in all respect - (b) Size 550 mm x 400 mm x 815 mm |
| 146 | Providing & fixing 15 mm C.P brass laboratory cock swan neck of approved make (to the approval of the Engineer-in- Charge) (a) Laboratory cock swan neck One Way |
| 147 | Providing and fixing Centrifugally cast iron Floor traps conforming to I.S.I. Specification (IS:3989) of approved make (to the approval of Engineer-incharge) of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. minimum depth of water should be 150mm with a minimum seal 50mm. (d)100mm x 75mm i/d deep seal |
| 148 | Providing and fixing in position vitreous Chinaware white Senso urinal size 37 x 39 x 61 cm of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mmouter length 75 mm complete in all respect. |
| 149 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. (b) C.P brass towel ring |
| 150 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 151 | Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm) |
| 152 | Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.35mm thick |
| 153 | One Way 6amp. Bell Push |
| 154 | Painting two or more coats excluding priming coat with Ready Mixed Paint for Metallic Surface in all shades on steel or iron work. |
| 155 | Providing & fixing 6\\" stainless steel handles ISI marked on door &window frames complete in all respect as per the directions of Engineer-in-charge. |
| 156 | Providing and Fixing Steel work fixed independently without connecting plates including cutting hoisting and fixing in position (c) Tees, angles and channels (Angle 75*75*8mm) Complete in all respect and instruction of Engineer in Charge. |
| 157 | Providing and fixing Steel work fixed independently without connecting plates including cutting hoisting and fixing in position for iron Gate at Dam Site i/c Supply of MS Flat 100*10mm for frame, angle Iron 200*100*10mm Pillar, MS Plate 915*915*8mm under bottom of Pillar, MS Flat 50*5mm @ 150mm c/c i/c welding. Cutting Complete in all respect as per PWD Specifications and approved Drawings. Flats |
| 158 | Providing and fixing Steel work fixed independently without connecting plates including cutting hoisting and fixing in position for iron Gate at Dam Site i/c Supply of MS Flat 100*10mm for frame, angle Iron 200*100*10mm Pillar, MS Plate 915*915*8mm under bottom of Pillar, MS Flat 50*5mm @ 150mm c/c i/c welding. Cutting Complete in all respect as per PWD Specifications and approved Drawings. Angles |
| 159 | Providing & fixing 6\\"stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. |
| 160 | Red meranti Normal (15 to 16 kg per cft. Approx.) doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position:- (a) Panelled, glazed or glazed and panelled.:-(ii) 35mm thick |
| 161 | Wire gauge fixed on chowkats with 25mm thick Yellow meranti Normal (15 to 16 kg per cft. Approx.) wood cover molding of full width. |
| 162 | Providing & fixing 250 X 10 mm anodized aluminum Mat Finish tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. |
| 163 | Providing and fixing in position vitreous Chinaware white laboratory sinks of approved make (to the approval of Engineer in-charge) consisting of a pair of brackets, C.P. brass waste 40mm complete in all respect:- Size 450 mm x 300 mm x 150 mm |
| 164 | Providing & fixing in postion C.P. brass Sink Cock with swinging spout (wall\ mounted) of approved make (to the approval of Engineerin-charge) complete in all respect. |
| 165 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect. (ii) C.P. brass Bib cock foam flow without flange |
| 166 | Providing and fixing in position C.P. brass overhead shower round or square 1 flow without shower arm with 15mm i/d inlet of approved make (to the approval of Engineerin-charge) complete in all respect:- CP Brass rain Fall Shower without arm 4\\" round |
| 167 | Providing and fixing in position C.P. brass overhead shower arm chrome round or square with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. CP Brass rain Fall Shower arm 15\\" length round chrome |
| 168 | Providing and fixing in position C.P. Brass Urinal button flusher 15 mm of approved make (to the approval of Engineer-in-charge) |
| 169 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 170 | Extra for providing and fixing G.I. 32mm waste pipe for urinal including elbow, reducer etc complete in all respect |
| 171 | Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect. Water Cooler Full Steel Body 40/80 ltr Capacity without Stablizer |
| 172 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.C.P. brass towel Rails size 15mm dia 610mm long |
| 173 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. completeI.S.I Designation No. II (size of door 701mm to 850mm) |
| 174 | Dismantling Sanitary fixtures Such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge (a) Eurpoean/Indian/Orissa W.C., |
| 175 | Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 176 | Providing and fixing helical door spring 150mm (superior quality) including necessary screws, complete. A) Brass helical spring |
| 177 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.Triple Layer Tanks |
| 178 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHE:- Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) ecessed in wall complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. Switches with indicator etc. and overed with Frame etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, She plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface): -Wiring fan point (with fan box) |
| 179 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHE:- Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) ecessed in wall complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. Switches with indicator etc. and overed with Frame etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, She plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface): -wiring light point |
| 180 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHE:- Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) ecessed in wall complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. Switches with indicator etc. and overed with Frame etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, She plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface): -wiring 6 amp wall socket point |
| 181 | Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. (a) Inside size 75x120 cm and 120 cm deep |
| 182 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm hick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. ((a))Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal |
| 183 | (34) Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm (for EHD and HD). (A) RCC Man hole cover with Frame (a) 560mm i/d RCC man hole cover with frame as per ISI (iii) Medium duty |
| 184 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. B. Single Socket Type B b. 110mm o/d SWR UPVC pipe lines laid complete |
| 185 | Providing, Laying , fixing & jointing of uPVC. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 200mm o/d pipe of 2.5 Kg. /sqm |
| 186 | Supplying and Fixing uPVC 90° Bend of 4kgf/cm2 Pressure confirming to relevant IS Code with latest Amendments, if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge - 200 mm. |
| 187 | Finishing walls with cement based water soluble exterior paint paint such as snowcem, robbiacem etc. two or more coats to give an even shade |
| 188 | Excavation by mechanical means (JCB or Hydraulic Excavator) in trenches for pipelines with straight or open cutting in streets or open area including dressing sides, leveling of beds of trenches to correct grade, cutting joint holes, refilling consolidation including the cost of diversion for traffic, crossing over trenches for access to the houses, watching fencing etc. and removal of surplus soil outside/inside the town involving lead upto 15m complete in all respect. |
| 189 | Providing & Fixing in postion C.I. bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineer-incharge ) complete in all respect -20mm i/d |
| 190 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 191 | HIRE CHARGES OF MACHINERY (b)0.75 Cu yd Capacity |
| 192 | Providing and fixing pair ofPlastic dustbins 100 litre volume each, of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollowsection verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete. |
| 193 | Providing and fixing of garden fencing of green hexagonal net:- b) Fixing of fencing with MS angles 25 x 25 x 3 mm frame, vertical members 1.5 m above ground fixed 30 cm in ground at 2m with cement concrete 1:2:4. Net to be fixed with nut bolts and washers. |
| 194 | Edging of paths/ beds with bricks/tiles laid dry, including required excavation, refilling, consolidating with hand and spreading surplus d) Brick inclined at 60 deg to horizontal |
| 195 | Supplying pot plant in 30 cm pots with plastic plate for indoor display at site of work. (b) In earthen Pot. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
