|
| 1 | Dismantling brick work tile, masonry or tile lining (a) in lime |
| 2 | (b) In cement |
| 3 | Scraping(a) White wash and colour wash |
| 4 | (b) Cement plaster |
| 5 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 6 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.(a) Doors of area 3 sqm and below. |
| 7 | (b) Windows of area 3 sqm and below |
| 8 | (c) Clerestory windows of area 3 sqm and below. |
| 9 | Dismantling cement conglomerate floors 25mm to 50mm thick without concrete base |
| 10 | Centring and shuttering for flat surfaces such as Suspended floors,roofs, Landing, Shelves etc. |
| 11 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure . |
| 12 | Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending ,binding and placing in position complete |
| 13 | Terracing Consisting of Tiles 22.86x11.43x3.83 cm laid over 25 mm mud Plaster7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of R.C.C slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing. |
| 14 | First class burnt brick work laid in cement sand mortar 1:4 in first Storey upto 4 meters above plinth level |
| 15 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated / anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface)(a) Wiring fan point (With fan box) |
| 16 | (b) Wiring light point |
| 17 | (c) Wiring 6Amp. Plug control comprising wall socket point |
| 18 | (d) Wiring 16/20Amp. power plug control point |
| 19 | (e) Wiring light point with double control switches |
| 20 | PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE:Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge(a) ( Overall size 6.0sq.mm (84/0.3mm), 2Core) |
| 21 | MINIATURE CIRCUIT BREAKERSSupply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs(a)MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 22 | (b) MCB Double Pole 50, 63amp. (10kA, Curve-C) |
| 23 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/RCBO's/ RCCB's:Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in thedistribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-(a) SP&N Double Door Distribution Board 8 way each |
| 24 | Supply of Electrical Items(a) Ceiling Fan 48\\" |
| 25 | (b) Heavy Duty Exhaust fan 12'' |
| 26 | (c) Tubelight set 36 watt LED |
| 27 | (d) LED light 18 watt |
| 28 | Erections of fans :(a) Erection of ceiling/cabin/exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) Cable 0.75 sqmm Complete(i) Erection of Ceiling Fan |
| 29 | (ii) Erection of Exhaust Fan with Louver shutter on the wall /window grill |
| 30 | (b) Erection of light fixtures on wall /ceiling having connection with PVC insulated PVC sheathed two single core copper conductor (FR) Cable 0.75 sqmm Complete (i) Erection of 1x20/28/36/40W Box Type (LED/ Fluorescent) light fixture |
| 31 | Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.(a) Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect. |
| 32 | Providing and fixing jet spray with 2'-6\\" long PVC pipe(a) With C.P. Brass nut |
| 33 | Providing and fixing in position C.P.brass.Tumbler Holder of approved make (to.the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 34 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. (a) Size 450mmx300mm |
| 35 | Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge) |
| 36 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick, grade-304 (18/8) with waste coupling complete in all respect(a) (Rectangular Sink with Deluxe Border Single Bowl Overall Size 555 mm x 475mm x 200 mm |
| 37 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. (a) Acrylic towel Rails size 20mm dia 600mm long |
| 38 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge. (a) Size 550mmx400mm |
| 39 | Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect(a) Aluminium khunti with 6 pegs |
| 40 | Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.(a) C.P. brass toilet paper holder. |
| 41 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect |
| 42 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 43 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 44 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect(a) C.P. Brass extension piece, 25mm long to 50mm long |
| 45 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.(a) PVC tube connection of size 15mm x 300 mm with C.P. Brass nut |
| 46 | Providing & Fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect.(a) CP Brass Bib Cock foam flow without flange |
| 47 | Providing & Fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.(a) C.P.brass 15mm stop cock Male and female end |
| 48 | Providing & fixing 15 mm C.P brass laboratory cock swan neck of approved make (to the approval of Engineer-in-charge ) complete in all respect (a) Laboratory cock swan neck One Way(a) Laboratory cock swan neck One Way |
| 49 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.Single Socket Type A (a)110mm o/d single socket SWR UPVC pipe lines laid complete |
| 50 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge )(a)110mm o/d |
| 51 | Providing and fixing in position SWR UPVC special for soil waste vent or anti siphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.(B) For 110mm o/d pipes(a) Single Tee |
| 52 | (b) Elbow 90 Degree (All side socketed) |
| 53 | (c) Nahani trap without jali 110mmx110mm |
| 54 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank.(a) Triple Layer Tanks |
| 55 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect.(a) G.I. tank nipple 32mm i/d |
| 56 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes (as per IS:15801-2008) SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing including testing of pipes complete as per direction of Engineer in Charge. Concealed work- including cutting chase & making good the wall etc.(a) PN - 16 Pipe, 25mm o/d |
| 57 | (b) PN - 16 Pipe, 32mm o/d |
| 58 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.(a) 25mm i/d Brass Ball valves |
| 59 | (b) 32mm i/d Brass Ball valves |
| 60 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make a ideal choice for high traffic zones.( Size 600x600mm) |
| 61 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing thejoints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading |
| 62 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 mm & 300x300mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 63 | Sal Wood chowkats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position(a) Double Rebate (60mm x 150mm) |
| 64 | (b) Single Rebate (60mm x 100mm) |
| 65 | Red meranti Normal Super (18 to 19 kg per cft. Approx.) doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position(a) Panelled, glazed or glazed and panelled.(i) 40mm thick (Single Leaf) |
| 66 | Wire Gauge Red meranti wood Super (18 to 19 kg per cft. Approx.) door shutter without springs housed in chowkats. (a) 35 mm thick |
| 67 | Red meranti Super (18 to 19 kg per cft. Approx.) wood cup board chowkats including iron hold fasts, iron hinges, corner straps, wooden knob or handles fixed in position ( Size 45x 60mm) |
| 68 | Red meranti Super (18 to 19 kg per cft. Approx.) cup board shutter with plywood panels or faced on both side fixed in position ( excluding the cost of Handles , bolt haspswith staple but including the labour for fixing them)(a) 30mm thick |
| 69 | Providing and fixing bright finished brass door latch with necessary screws etc complete :250x16x5( best make of approved quality) |
| 70 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete(a) I.S.I Designation No. III (size of door 851mm to 1000mm) |
| 71 | Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (a) Glazing area above 0.09 sqm(i) 5.0mm thick Plate glass (INDIAN |
| 72 | Providing and fixing 6” stainless steel handles ISI marked on door & window frames complete in all respect as directions of Engineer – in Charge |
| 73 | Providing and fixing 6” stainless steel tower bolts ISI marked on door & window frames complete in all respect as directions of Engineer – in Charge |
| 74 | 12.5 mm thick cement plaster 1:4 |
| 75 | Cement Pointing 1:3 deep variety |
| 76 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. |
| 77 | Applying pink primer or aluminium priming coat on wood work including preparation of surface knotting and stopping etc. |
| 78 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 79 | Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete |
| 80 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 81 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 82 | Finishing walls with cement based water soluble exterior paint such as snowcem ,robbiacem etc. two or more coats to give an even shade |
| 83 | Applying Primer Coat with metal primer on new steel or iron work including preparation of surface |
| 84 | Earthwork in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres |
| 85 | Cement concrete 1:4:8 (b) With stone aggregate 40mm gauge (i) mixing by manual means |
| 86 | First Class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth |
| 87 | Damp proof course 4cm thick cement concrete 1:2:4 with 2 Coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded |
| 88 | Providing and fixing in position vitreous Chinaware white Indian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. |
| 89 | Earthwork Excavation in ordinary soil , exclusive of compensation of earth (b) Earth work undressed with a combined lead upto 15 meters including breaking of clods Complete in all respect as Instructions of Engineer in Charge |
| 90 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socketed (working pressure (4kgf/cm2) comforming to IS:4985, including fixing with MS Clamps. (a) U-PVC pipes (working pressure 4 kgf./ sqcm) pipe 110 mm dia |
| 91 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.(a) UPVC 100 mm bend |
| 92 | Laying of Dry Brick Ballast 40mm gauge for flooring |
| 93 | Base Course of floor consisting of 100mm thick cement concrete 1:8:16with stone aggregate 40mm gauge and 100mm fine sand filling using mechanical mixer for mixing of material |
| 94 | Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested , equipment as requried such as hand boring machine and its accessory, transportation to site and vice versa etc. Complete in all respect as per instructions of Engineer-in -charge.(a) Boring with 150mm id Housing Pipe Upto 150 m depth BGL. |
| 95 | Supplying, lowering of MS Pipe as per IS:4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore Complete in all respect as per instructions of Engineer-in -charge.(a) 100mm nominal diameter (weight 14.5 kg per metre) 5.40 mm thickness |
| 96 | Supplying, Fixing & lowering of Stainless Steel Cage type wire wound screen as per relevant IS Code or ISI marked duly welded with suitable grade S.S welding electrode to lower the strainer into tubewell bore (a) 100mm Steel Strainer ( Slot size 0.15/0.20 mm) 5.0 mm thickness |
| 97 | Supplying, Fixing & lowering of Stainless Steel Socket as per relevant IS Code or ISI marked duly welded with suitable grade S.S welding electrode to lower the strainer into tubewell bore complete in all respect.(a) 100 mm internal diameter |
| 98 | Supplying, lowering & fixing of MS Special Socket to connect S.S Strainer to M.S Pipe duly welded with suitable grade welding electrode complete in all respect.(a) 100 mm internal diameter |
| 99 | Supply and fixing of bail plug of MS Pipe complete with inverted U-hook attached to the bottom plug complete in all respect(a) 100mm nominal diameter (weight 14.5 kg per metre) 5.40 mm thickness |
| 100 | Supply and fixing of well cap having thread to fix on housing pipe complete in all respect(a) 100mm internal diameter |
| 101 | Supplying at site of gravel of 1/16\\" to 1/8\\" sizes including pouring and packing in the annular space between the pipes assembly and the bore.The gravel should be free from, dust,dirt, or the vegetable manner as per IS 4097/1967 with latest amendments (to be paid as per actual length of pipe) complete in all respect as per instructions of Engineer-in -charge. |
| 102 | Development and Stabilizing of the tubewell with Submersible pump of required capacity as directed by the Engineer-in-charge including cost of tools, appliances & consumabe to satisfaction of Engineer - in- Charge |
| 103 | Supply and lowering of submersible pump set 2 H.P/ 30 stages at site of work complete in all respect as per instructions of Engineer-in -charge. |
| 104 | Supply and fixing of submersible cable 4 mm square size at site of work complete in all respect as per instructions of Engineer-in -charge. |
| 105 | Supply and fixing of control panel 2 H.P complete in all respect as per instructions of Engineer-in -charge. |
| 106 | Nuts and Bolts of all sizes and length required complete in all respect as per instructions of Engineer-in -charge |
| 107 | Supply and fixing of Jain & nipple for pump complete in all respect as per instructions of Engineer-in -charge |
| 108 | Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B Class including cost of specials (such as tees, bends, sockets, elbows etc.) , cutting, threading and testing in trenches in the ground complete in all respect as per instructions of Engineer-in -charge(a) 32mm i/d |
| 109 | Making dewatering arrangement by pumping set 4\\"*4\\" ( Tractor Driven) Complete in all respect as per Instruction of Engineer- in- Charge. |
| 110 | Clearance of sarkanda,Weed, jala , booti etc from wet drains (Stilling Basin) by machinery having bed width (ii) More than 20 feet Complete in all respect as per Instruction of Engineer- in- Charge. |
| 111 | Removel / Clearance of Slush from wet Drains (Stilling Basin) by mechanical means with an average lead of 2.3 km including loading and unloading complete in all respect as per intrwction of Engineer- in- charge. |
| 112 | Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.90 cum bucket Capacity including cutting, trimming bottom and side slopes, in accordance with requirement of lines, grades and cross sections including all lifts , loading and unloading with an average lead of 2.3 Km complete in all respect as per intruction of Engineer- in-charge |
| 113 | Extra for wet Earthwork for Depth above 30 cm of sub soil water level.complete in all respect as per intruction of Engineer- in-charge |
| 114 | Supply and Fixing Knife Edge Valve Size - 750 mm dia.(Manually Operated) Conforming to relevant IS Code including dismantling of old valve, dewatering arrangement etc complete in all respect as per instructions of Engineer-in -Charge. |
| 115 | Repair of Terminal Structure Gate at Dam Site including repairing rod, side channel sheet including fitting complete in all respect. |
| 116 | Repair of Hand wheel, Stuffing box including replacing of Jain Dori Complete in all respect. |
| 117 | Kail Wood 40mm thick planking tongued and grooved flooring including fixing with screws complete . |
| 118 | Dismantling barbed wire or flexible wire rope in fencing including making Rolls and Stacking within 50 meters lead.Complete in all respect as Instructions of Engineer in Charge |
| 119 | Cement Concrete 1:2:4 With Stone Ballast or Shingle mixing by mechanical means using Concrete mixer Volumetric type Complete in all respect as per Instructions of Engineer in Charge. |
| 120 | Steel work fixed independently without connecting plates including cutting, hoisting and fixing complete in all respect as per Instructions of Engineer in Charge.(a) Flats |
| 121 | (b) Tees, Angle & Channel |
| 122 | Interlink chain cross wire/ 8 ft. high cross wire fencing wire mesh Complete in all respect as per Instructions of Engineer in Charge. |
| 123 | Removal of Clearance of Slush from wet Drains by mechanical means with an average lead of 400 m including loading, unloading complete in all respect as per instruction of Engineer -in -Charge. |
| 124 | Excavation in soil ( any type ) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes , in accordance with requirements of lines , grades and cross sections with an average lead of 400 m including loading unloading complete in all respect as per instructions of Engineer -in-charge. |
| 125 | Excavation in soil ( any type ) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes , in accordance with requirements of lines , grades and cross sections with an average lead of 2.2 km including loading unloading complete in all respect as per instructions of Engineer -in-charge. |
| 126 | Rehandling of Earth work undressed with a combined lead of 35 m complete in all respect as per instructions of Engineer -in-charge. |
| 127 | Dressing of Earthwork (i) New Work or remodelling work.Unit |
| 128 | Dismantling Cement Concrete Plain 1:2:4 mix Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge |
| 129 | Boulder masonry in cement mortar (1:6) in foundations and plinth. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge. |
| 130 | Grouting Stone filling or pitching(b) With mortar of Catch Drains Complete in all respect as per Instructions of Engineer-in- Charge |
| 131 | Steel work in built up tubular pipes ( round, square or rectangular hollow tubes etc. ISI Marked) for flat shed ( i.e Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc Complete |
| 132 | Providing and fixing stair case railing made out of MS Square bars 20x 20 mm as vertical Cost 0.70 m high fixed with MS Base Plate of 40mmx40mmx6mm and flat iron 40mmx6mm as hand rail complete in all respect |
| 133 | 12.5mm thick Cement Plaster 1:3 |
| 134 | Painting new letters and figures of black synthetic enamel paint to an even shade |
| 135 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the jointswith fine sand etc, all complete as per directions of Engineer-in-Charge. IS Code: 15658(2006) |
| 136 | Cement concrete 1:2:4 mixing by manual means Complete in all respect as Instructions of Engineer in Charge |
| 137 | Precast Cement Concrete Kerb (a) Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications Complete in all respect as Instructions of Engineer in Charge |
| 138 | Removing old paint with caustic soda solution and preparing surface Complete in all respect as per Instructions of Engineer- in -Charge. |
| 139 | Preparation of concrete or plastered surfaces for painting (including sand papering the surface ) using ready mixed cement based wall putty by applying two or more coats to get required finish complete in all respect as per Instructions of Engineer- in -Charge. |
| 140 | Painting gauge 60 cm vide reading to centimeter with synthetic enamel paint (two coats) to give an even shade complete in all respect as per Instructions of Engineer- in -Charge. |
| 141 | Providing Non-recording Rain Gauge Conforming to IS: 5225 (200 mm measuring capacity) Please Enable Macros to View BoQ information |
