|
| 1 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area n. exc 1.5 Sqm each, complete all as specified and as directed. |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area exc 1.5sqm but n. exc. 4.0 sqm each, complete all as specified and as directed. |
| 3 | Taking down chowkhat or frames of area n. exc 1.5 Sqm each, complete all as specified and as directed. |
| 4 | Taking down chowkhat or frames of area exc 1.5sqm but n. exc. 4.0 sqm each, complete all as specified and as directed. |
| 5 | Taking down shutters of any description of area n exc 2sqm each, complete all as specified and as directed. |
| 6 | Taking down shutters of any description of area exc 1sqm but not exc 2sqm each, complete all as specified and as directed. |
| 7 | M&L for Second class hard wood plain solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints , complete all as specified and as directed |
| 8 | M&L for PCC 1:4:8 type D2 (using 40mm graded Granite stone aggregate) as in foundation, sub base of flooring, filling mass concrete etc., with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed. |
| 9 | M&L for PCC type B2 [1:2:4] using 40mm graded granite stone aggregate) as in surface channel, drain and the like including weathering, slightly rounded or chamfered angles and throating, finished plain fair faces, including demolition of existing cement concrete of any description, complete all as specified and as directed. |
| 10 | M&L for Forming extra fair finished drain or channel of 30cm inner grith or width in cement concrete using extra cement with and including forming moulds / stopped ends etc., complete all as specified. |
| 11 | M&L for Forming extra fair finished drain or channel of 45cm inner grith or width in cement concrete using extra cement with and including forming moulds / stopped ends etc., complete all as specified. |
| 12 | M&L for PCC 1:3:6 type C2 (using 40mm graded Granite stone aggregate) as in foundation, sub base of flooring, filling mass concrete etc., with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed. |
| 13 | M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6, with and including demolition of existing brick work of any description, complete all as specified and as directed. |
| 14 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6, with and including demolition of existing brick work of any description, complete all as specified and as directed. |
| 15 | M&L for 100mm thick plain cement concrete 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in sub base of flooring, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed. |
| 16 | M&L for 50mm thick plain cement concrete 1:2:4 type B2 (using 40mm graded granite stone aggregate) as in sub base of flooring, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed. |
| 17 | M&L for 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded hard granite stone aggregate) as in plinth protection, finished even and fair without using extra cement including making construction joints in 3 mtres interval and joint filled with sealing compound, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed. |
| 18 | S&F Pre painted galvalume coating GI based corrugated / trapezoidal / tiles profile steel sheet, AZ-70 coating mass, 0.50mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers, with and including dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings, complete all as specified and as directed. Note: Measurement shall be taken flat as fixed without any allowance for laps etc., |
| 19 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, with and including dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings, complete all as specified and as directed. |
| 20 | S&F Aluminum Plain sheet 0.71mm thick of Alloy 31000H4, fixed as in ridge, hip, valley gutter, drip and straight flashing (length & grith as fixed) with and including dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings, complete all as specified and as directed. |
| 21 | S&F Rolled mild steel roof trusses (framed) trussed purlins, rafters, struts (beam, tee, angle channel or flat sections including distance pieces, cleats etc. conforming to grade Fe 410-W Gde E - 250 quality 'B', with and including dismantling wrought iron or mild steel of any description, complete all as specified and as directed. |
| 22 | M&L for False ceiling with High Pressure Steam Cured (HPSC) 4mm thick Non Asbestos Fibre Cement ceiling boards fixed with and including powder coated aluminium snap grid of size 605mmx605mm consisting of 25X25X1.25mm aluminium angles and TEEs of size 35x25x1.25mm with galvanised wire of required length and 6mm dia hanger grid suspended from trusses/ ceiling and purlins not exceeding 1200mm c/c both ways, with and including applying three coats of white wash on ceiling surface, with and including taking down existing u/s ceiling with frame work of any description, complete all as specified and as directed. |
| 23 | M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube of top and bottom rails, MS frame shall be covered with heat moulded prelaminated PVC \\"C\\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheet for top rail ,lock rail and bottom rail, for fully wire gauzed, panel will be of wire gauze in lieu of single side prelam PVC sheet panel, wire gauze shall be wrapped on an additional square 8mm MS Solid tube and this tube shall be welded to MS tubes, wire gauge shall be stretched to tighten firmly, complete all as per specification and drawings, complete all as specified and as directed. |
| 24 | M&L for solid PVC Door Frame of Size 50mm x 47mm out of 5mm prelaminated PVC sheet on both sides reinforced with M.S Square tube, supplying and fixing in opening as per sepcification and drawing, complete all as specified and as directed. |
| 25 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window Frame/ Chowkhat of size 65mm x 125mm with virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibbers (wood powder/ rice husk/ wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) with mitre joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant, and fixed in position with and including MS hold fast/lugs/SS dash fasteners as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 26 | All as per Serial Item No. 25 here-in-before but for chowkhat size 45mm x 70mm, complete all as specified. |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension rade), calcium carbonate and natural fibbers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant, complete all as directed by Engineer-in-Charge. |
| 28 | All as per Serial Item No. 27 here-in-before but for 25mm thick door, complete all as specified. |
| 29 | M&L for Factory made 2nd class hard wood Glazed and skeleton shutters , 35mm thick, open rebated and prepared to receive glass, gauze, etc. (with divided in to square with plain, chamfered or rounded, mitered and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 30 | M&L for Factory made Flush shutters 30mm thick, with one face covered with decorative face veneer with lipping / frame to match, solid core construction, with block board core and plywood face panels, commercial type, complete all as specified and as directed. |
| 31 | M&L for 18mm thick prelaminated particle board, interior grade, prelaminated on one side with decorative choice lamination and on the other side with white lamination, as in cub board shelves/ cabinet works fixed with screws, fixed in repairs, all as specified and directed |
| 32 | M&L for 18mm wide x 6mm thick external teak wood lipping around edges of particle board/ plywood including french polishing, fixed in repairs all as specified and as directed. |
| 33 | Repairs to loose hanging mild steel window / ventilator shutters of area not exc 1.0SqM upto 3 story height buildings, by repair to hardware by welding / screws, making smooth function of shutters by making necessary repair and making good the disturbed surface, complete all as specified and as directed. |
| 34 | S&F IN REAPIR Helical door spring MS 300mm long ordinary rat tail pattern spring, ISI marked, including roller and roller plate complete fixed to wooden/steel chowkats complete all as specified and as directed. |
| 35 | S&F MS butt hinges cold rolled medium weight 100mm size, ISI marked, complete all as specified and as directed. |
| 36 | S&F IN REPAIR Aluminium anodised barrel tower bolt of extruded section of size 200mm long complete, complete all as specified and as directed. |
| 37 | S&F IN REPAIR Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete, complete all as specified and as directed. |
| 38 | S&F IN REPAIR 150mm long extruded section aluminium alloy anodised handles fabricated type, complete all as specified and as directed. |
| 39 | S&F 125mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified. |
| 40 | M&L for Floor door stopper of Aluminium alloy body & tongue, anodised with 150mm long and hard drawn steel spring, fixed in door, complete all as specified and as directed. |
| 41 | S&F IN REPAIR SS curtain rod 20mm bore dia with brackets, fixing stops, roller bracket, wooden nobs etc., with Harrison rails, complete all as specified. |
| 42 | M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane, complete all as specified and as directed. |
| 43 | S&F Powder coated aluminium window / ventilator shutters, fixed type without sash bars, with aluminium sections weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing and powder coated aluminium snap beading screws (thickness of powder coating not less than 50 micron), complete all as specified and as directed. Note:- aluminium shutter shall be measured in sqm. All the aluminium fittings/fixtures such as butt hinges, tower bolts, handles etc, sheet glass shall be measured and paid separately under relevant items. Please Enable Macros to View BoQ information |
| 44 | S&F Powder coated aluminium window / ventilator shutters, fixed type without sash bars, with aluminium sections weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing and powder coated aluminium snap beading screws (thickness of powder coating not less than 50 micron), complete all as specified and as directed. Note:- aluminium shutter shall be measured in sqm. All the aluminium fittings/fixtures such as butt hinges, tower bolts, handles etc, sheet glass shall be measured and paid separately under relevant items. Please Enable Macros to View BoQ information |
