|
| 1 | Scraping old white or color wash including disposal of refuse as directed by Engineer-in-charge within a distance of 60 meter (200 feet). SOR No 708(Including all taxes, labour cess etc but excluding GST) |
| 2 | 12mm thick plaster with cement mortar consisting of 1 part cement and 6 part of approved coarse sand. Minimum thickness not be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work.DSR-13.4.2(Including all taxes, labour cess etc but excluding GST) |
| 3 | M-150 brick work in 1:4 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work. As per SOR 305(Including all taxes, labour cess etc but excluding GST) |
| 4 | 25 mm thick 1:2:4 plain C.C Floor with cement , approved coarse sand and 20mm graded approved stone laid in panels finished with 3 mm floating coat of neat cement or cement and marble dust in 5:1 as specified over & including 8 cm thick base concrete consisting of cement, local sand and brick ballast 4 cm gauge in the proportion of 1:4:8 and removing any over lapping mortar at the joints of panels if any and given them a uniform finish including supply of all materials, labor and T&P etc. required for completion of the work. As per Sor 601b (without base)(Including all taxes, labour cess etc but excluding GST) |
| 5 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters DSR 9.21.1(Including all taxes, labour cess etc but excluding GST) |
| 6 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes. DSR 10.30.1(Including all taxes, labour cess etc but excluding GST) |
| 7 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. DSR 17.28.2.1(Including all taxes, labour cess etc but excluding GST) |
| 8 | Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. DSR 17.31(Including all taxes, labour cess etc but excluding GST) |
| 9 | Providing and fixing C.P. Brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810gms. 15mm nominal bore. AS per SOR 18.50.1(Including all taxes, labour cess etc but excluding GST) |
| 10 | Providing and fixing G.I. Union in G.I. Pipe including cutting and treading the pipe and making long screws etc. complete (New work). 20mm nominal bore. AS per SOR 18.48.2(Including all taxes, labour cess etc but excluding GST) |
| 11 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore DSR 18.49.1 (Including all taxes, labour cess etc but excluding GST) |
| 12 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture DSR 13.48.2(Including all taxes, labour cess etc but excluding GST) |
| 13 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80(Including all taxes, labour cess etc but excluding GST) |
| 14 | Finishing walls with Acrylic smooth exterior paint of required shade: - New work (Two or more coat applied @ 1.43 Ltr./10 Sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 Sqm. DSR 13.47.1(Including all taxes, labour cess etc but excluding GST) |
| 15 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on preared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achive the desired denisty, complete as per Technical Specification clause 401. Excluding Royalty.(Including all taxes, labour cess etc but excluding GST) |
| 16 | Providing and Laying of Rubber moulded (Grey colour) Interlocking Concrete Block Pavements having thickness 80 mm including leveling and dressing of surface to required level and slope, spreading and moisting 30m thick local sand on bend, filling joints with local sand on bend, filling joints with local sand etc. for proper completion of the work as per drawings and Technical Specification Clause 1504. As for SOR NS-1 DSR 16.69(Including all taxes, labour cess etc but excluding GST) |
| 17 | Providing and Laying of Rubber moulded (Red colour) Interlocking Concrete Block Pavements having thickness 80 mm including leveling and dressing of surface to required level and slope, spreading and moisting 30m thick local sand on bend, filling joints with local sand on bend, filling joints with local sand etc. for proper completion of the work as per drawings and Technical Specification Clause 1504. As for SOR NS-2(Including all taxes, labour cess etc but excluding GST) |
| 18 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 12 mm mild steel U beading DSR 9.51.1(Including all taxes, labour cess etc but excluding GST) |
| 19 | Supply & fixing of Carrier A.C. 2 Tone including cost of All material labour etc complete.(Including all taxes, labour cess etc but excluding GST) |
| 20 | Supply & fixing of Voltas A.C. 1.5 Tone including cost of All material labour etc complete.(Including all taxes, labour cess etc but excluding GST) |
| 21 | Reparing of roof sheet and ridge sheet. including cost of All material labour etc complete.(Including all taxes, labour cess etc but excluding GST) Please Enable Macros to View BoQ information |
