|
| 1 | Demolition of unreinforced cement concrete in ground floor and paving/ hard standing n.exc 15 cm thick below or above ground level including removing debris complete all as specified and directed |
| 2 | Material and labour for 100mm thick cement concrete type - C 2, 1:3:6 (40mm graded aggregate) as in sub base complete all as specified and directed |
| 3 | Material and labour for cement concrete work in hard-standing at ground level using M30 grade (design mix) with 20mm graded aggregates, thickness of concrete 20 cm or less including use & waste of formwork complete all as specified and directedNote:- 1. Mix design to be approved by GE before commencing the work. 2. Neccesary joints in hard standing shall be measured and paid separately |
| 4 | Providing and laying 60mm thick factory made chamfered edge cement concrete paverblock of M-35 grade with approved design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required pattern over and including 50mm thick compacted bed of fine sand/coarse aggregate chips, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed |
| 5 | Material and labour for providing, cement concrete 1:3:6 C1(20mm aggregate ) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs, water troughs,sides of path and the like including weathering, slightly roundedor chamfered angles and throating, complete all as specified and directed |
| 6 | Material and labour for finishing surface of concrete roads, pavements/ hardstanding by brooming complete all as specified and directed |
| 7 | Material and labour for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for 150mm thick pavement complete all as specified and directed |
| 8 | Material and labour for forming contraction (dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade B complete all as specified and directed |
| 9 | Material and labour for forming construction joint 30mm deep x 10mm wide filled with sealing compound grade B complete all as specified and directed Please Enable Macros to View BoQ information |
