|
| 1 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area n. exc 1.5 Sqm each, complete all as specified and as directed. |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area exc 1.5sqm but n. exc. 4.0 sqm each, complete all as specified and as directed. |
| 3 | Taking down shutters of any description of area n exc 1sqm each, complete all as specified and as directed. |
| 4 | Taking down shutters of any description of area exc 1sqm but not exc 2sqm each, complete all as specified and as directed. |
| 5 | M&L for Second class hard wood plain solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints , complete all as specified and as directed. |
| 6 | S&F 35mm thick factory made 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, size of rail and style as per IS - 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed. |
| 7 | M&L for Factory made 2nd class hard wood Glazed and skeleton shutters , 35mm thick, open rebated and prepared to receive glass, gauze, etc. (with divided in to square with plain, chamfered or rounded, mitered and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 8 | M&L for Factory made 2nd class hardwood 30mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc for windows, ventilators for etc provided with stiles and rails and divided into square with plain chamfered or rounded mitred and rebated sash bars any numbers size of members of shutters as specified in SSR Part-I Section 8 Clause 8.24(b) supplied and fitted to chowkats, complete all as specified and as directed. |
| 9 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibbers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant, and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 10 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension rade), calcium carbonate and natural fibbers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant, complete all as directed by Engineer-In-Charge. |
| 11 | Material and labour for Aluminium frame work as in doors, partitions and windows with one or more rebates using powder coated (Minimum thickness of Powder coating 50 micron) aluminium sections including provision of glazing clips, hinges, handles, joining cleats etc complete all as specified and as directed.Notes:(i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings.(ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets.(iii) Particle board/ glass panels shall be measured and paid separately. |
| 12 | S&F MS butt hinges cold rolled medium weight 100mm size, ISI marked, complete all as specified and as directed. |
| 13 | S&F MS butt hinges cold rolled medium weight 75mm size, ISI marked, complete all as specified and as directed. |
| 14 | S&F Stainless steel butt hinges cold rolled medium weight 100mm size, ISI marked, complete all as specified and as directed. |
| 15 | S&F Helical door spring MS 300mm long ordinary rat tail pattern spring, ISI marked, including roller and roller plate complete fixed to wooden/steel chowkats complete all as specified and as directed. |
| 16 | S&F IN REPAIR Helical door spring MS 300mm long ordinary rat tail pattern spring, ISI marked, including roller and roller plate complete fixed to wooden/steel chowkats complete all as specified and as directed. |
| 17 | S&F 100mm long Extruded aluminium alloy 'D' type handles, fabricated type, anodised complete all as specified and as directed. |
| 18 | S&F 150mm long Extruded aluminium alloy 'D' type handles, fabricated type, anodised complete all as specified and as directed. |
| 19 | S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete, complete all as specified and as directed. |
| 20 | S&F Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete, complete all as specified and as directed. |
| 21 | S&F Aluminium anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and all as directed. |
| 22 | S&F IN REPAIR Aluminium anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and all as directed. |
| 23 | M&L for Floor door stopper of brass body and tongue,anodised,with 140mm long cover plate and hard drawn steel spring, fixed in door, complete all as specified and as directed. |
| 24 | M&L for repair Floor door stopper of brass body and tongue,anodised,with 140mm long cover plate and hard drawn steel spring, fixed in door, complete all as specified and as directed. |
| 25 | M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 26 | S&F MS Flat iron of size 25x3mm thick as in hold fast and similar small article conforming to Fe-290 Grade-E-165, complete all as specified and as directed. |
| 27 | M&L for Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 28 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples, complete all as specified and as directed. |
| 29 | S&F IN REPAIR Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples, complete all as specified and as directed. |
| 30 | M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane, with and including hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 31 | M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in squares exceeding 0.5Sqm in each pane, with and including hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 32 | S&F Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165, with and including dismantling old girls, gratings etc., complete all as specified and as directed. |
| 33 | M&L for 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection, finished even and fair without using extra cement including making construction joints in 3 mtres interval and joint filled with sealing compound, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed. |
| 34 | M&L for Premium quality, joint free coloured Non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc. 0.06 Sq.m. but n. exc. 0.11 Sq.m, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed. |
| 35 | M&L for Premium quality, joint free coloured Non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc. 0.11 Sq.m. but n. exc. 0.18 Sq.m, as in floors/skirting etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed. |
| 36 | M&L for Vitrified Ceramic tiles 08mm to 10mm thick (square/rectangular) area of each tile exc. 0.18 Sq.m. but n. exc. 0.36 Sq.m, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed. |
| 37 | M&L for 75mm thick plain cement concrete 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in sub base of flooring, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed. |
| 38 | M&L for Rubber coated chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, with grey cement and pigments with GLOSSY FINISH set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, with and including demolition of existing floor tiles of any description, complete all as specified and as directed. |
| 39 | M&L for Premium quality, joint free ceramic glazed coloured wall tiles of 7 to 8mm thick (square / rectangular) area of each tile not exc 0.18Sqm, on vertical surfaces such as dado and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over & including 10mm thick rendering in CM 1:3 and including taking down existing dado/skirting with backing mortar, complete all as specified. |
| 40 | S&F Pre Polished Kota stone slab 20-25mm thick, as in flooring and the like, laid over and including 15mm thick cement mortar in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab, with and including demolition of existing floor tiles of any description, complete all as specified and as directed. |
| 41 | S&F Pre Polished Kota stone slab 20-25mm thick, as in landing, riser and treads in steps, skirting, dado and the like, laid over and including 15mm thick cement mortar in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab, with and including taking down existing dado / skirting with backing mortar, complete all as specified and as directed. |
| 42 | S&F Machine cut cudappah stone slab 20-25mm thick, as in flooring, steps, cooking platform and the like, laid over and including 15mm thick backing coat in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing, with and including demolition of existing floor, complete all as specifed and as directed. |
| 43 | M&L for Machine cut Granite stone slab, 20mm thick, premium quality, any colour, as in flooring, set and jointed with neat cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab over 15mm thick screed bed in cement mortar 1:4 including rubbing and polishing and dismantling of existing unserviceable stone tiles alongwith cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and as directed. |
| 44 | M&L for Machine cut Granite stone slab, 20mm thick, as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including bull nosing the edges, rubbing and polishing complete and 10mm thick backing coat in CM 1:4 including dismantling of existing unserviceable stone tiles alongwith cement mortar bedding and removing rubbish off the premises, complete all as specified and as directed. |
| 45 | M&L for Factory made Machine pressed pre-cast cement concrete interlocking paver block of any shape and size with glossy finish on top, confirming to IS 15658-2006 of 60mm thick, M-35 grade with grey cement and pigment, with and laid over and including 50mm thick sand cushion (crushed stone sand / M sand) under interlocking paver block including watering and consolidation, with and including dismantling existing stone sett paving of any thickness, removing rubbish off the permises, complete all as specified and as directed. |
| 46 | S&F Mild Steel Plain Sheet 0.80mm thick of class 8, grade of zinc coating 275, as in roof covering/ridges, hips, fixed with screws, with and including taking down existing u/s mild steel sheet roof of any description, complete all as specified and as directed. |
| 47 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, with and including taking down existing u/s sheet roof of any description, complete all as specified and as directed. |
| 48 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, with and including taking down existing u/s AC sheet roof of any description, complete all as specified and as directed. |
| 49 | M&L for Cement concrete roofing tiles, rustic red colour, 420mm x 330mm size of 230 kg minimum breaking strength, double groove design, as in roofing, interlocking at side joints, laid dry, with and including dismantling u/s mangalore pattren roof tiles, removing rubbish off the premises, complete all as specified and as directed. |
| 50 | M&L for Cement concrete Rusted Red/Grey colour Ridge cap of size 360mmx207mm x 240mm, with and including 15mm thick in roofing bedded and jointed in cement mortar 1:6, with and including dismantling u/s mangalore pattren ridge cap roof tiles, removing rubbish off the premises, complete all as specified and as directed. |
| 51 | S&F 2nd class HW timber scantlings, clean sawn supplied and fixed as in framed work, with and including dismantling existing u/s timber scantling framed work 40sq.cm and over section, in any position, complete all as specified and as directed. |
| 52 | Taking down & refixing in old or new position of 2nd class HW scantlings, clean sawn, with and including dismantling existing u/s timber scantling framed work 40sq.cm and over section, in any position, complete all as specified and as directed. |
| 53 | M&L for Plain fillets, square, rectangular or triangular in section, cleansawn, secured with nails or beads; sectional area exc 6 and n exc 13 Sq.cm including dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, complete all as specified. |
| 54 | S&F Rolled mild steel roof trusses (framed) trussed purlins, rafters, struts (beam, tee, angle channel or flat sections including distance pieces, cleats etc. conforming to grade Fe 410-W Gde E - 250 quality 'B', with and including dismantling wrought iron or mild steel of any description, complete all as specified and as directed. |
| 55 | M&L for Mild steel Wind Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe 290 Gde-E-165, with and including distantling existing steel work of any description, complete all as specified and as directed. |
| 56 | Fixing only Mild steel Wind Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe 290 Gde-E-165, with and including distantling existing steel work of any description, complete all as specified and as directed. |
| 57 | M&L for PCC type C1 [1:3:6] using 20mm graded granite stone aggregate) as in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, finished plain fair faces, including demolition of old cement concrete of any type, complete all as specified and as directed. |
| 58 | M&L for Preparing surface of wood and wood based materials, new or old, of any description and girth and treated with creosote oil, complete all as specified and as directed. |
| 59 | S&F PVC (SWR) eaves gutter 150mm dia trapezodial shape Gde-I fixed with MS clamps, including taking down existing u/s eaves gutter pipes, rain water pipes (of any size or pattern) including fittings, head shoes, bends, swan neck etc., complete all as specified and as directed. |
| 60 | S&F IN REPAIR 75mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed. |
| 61 | S&F IN REPAIR 110mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed. |
| 62 | S&F IN REPAIR uPVC (SWR) bend any radius with access door, suitable for 110mm bore pipes, including jointing with solvent, complete all as specified and as directed. |
| 63 | S&F IN REPAIR uPVC (SWR) bend any radius with access door, suitable for 75mm bore pipes, including jointing with solvent, complete all as specified and as directed. |
| 64 | S&F IN REPAIR uPVC (SWR) Floor / Nahani trap with grating of 75mm dia outlet, setting and jointing with solvent, complete all as specified and as directed. |
| 65 | S&F IN REPAIR Stainless Steel grating doom 125mm dia (minimum weight 40grams) with waste hole, fixed with white cement, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 66 | S&F IN REPAIR Stainless Steel grating doom 125mm dia (minimum weight 40grams) with waste hole, fixed with white cement, complete all as specified and as directed. Please Enable Macros to View BoQ information |
