|
| 1 | Attending complaints of leaking/unserviceable pillar cock, wall mixer, bib taps, two way bib taps, stop valves etc of plumbing items , size15mm-20mm dia for making it fully functonal and leak proof by carefully including taking down, replacing minor unserviceable parts such as rubber washer, leather washers, jumpers brass, brass spindle 15mm-20mm size size complete all as directed and specified. |
| 2 | Attending complaints of leaking/unserviceable low level flushing cisterns of PVC or vitrous china ware for making it fully functional and leak proof by replacing the defective parts such as rubber washers, PVC levers, PVC/CP knobs and internal kit etc if required complete all as directed and specified. |
| 3 | Attending complaints of internal water supply pipes, fittings and bottle traps for removing of blockages etc of any description incl removing & clearig of air locks etc by pressure pump of any other means including taking down and refixing of pipes & fittings and replacing old unserviceable pipes & fittings with new ones upto 0.5mtr long pipes complete all as specified and as directed. |
| 4 | Attending complaints of joinery works including refixing of door hinges, door handels, tower bolts etc, welding of any parts of steel windows/ventilator& chowkhats if any required at site complete all as specified and as directed. . |
| 5 | M&L for cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 liter but n exc 500 liter, and from mouths of circulating pipes, etc. complete all as specified and as directed. Note: float valve, tank cover ,gate valve etc shall be repaired/ replaced by the contractor if damaged during cleaning without any extra cost. |
| 6 | M&L for cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 liter but n exc 1000 liter, and from mouths of circulating pipes, etc. complete all as specified and as directed. Note: float valve, tank cover, gate valve etc shall be repaired/ replaced by the contractor if damaged during cleaning without any extra cost. |
| 7 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 8 | Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed. |
| 9 | Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified |
| 10 | M&L for squared rubble walling Jodhpur type brought upto course well bonded, bedded and solidly hearted built in cement mortar (1:6) complete all as specified and directed. |
| 11 | M&L for squared rubble walling Jodhpur type brought upto course well bonded, bedded and solidly hearted built in cement mortar (1:6) but except stone complete all as specified and directed. |
| 12 | Extra over of hammer dressing to face stone with maximum depression on face from straight edge not exc 20mm and dressing face bed and joints as specified to squared rubble walling jodhpur type brought upto cources as directed |
| 13 | M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 14 | M&L for rendering 15 mm thick in CM (1:4) in two layers (10mm thick in ist layer and 5mm thick in final layer) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and fair with WPC as per manufacturer instruction complete all as specified and directed. |
| 15 | M&L for rendering 10 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L for keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:4 all as specified. |
| 17 | M&L for preparation of newly plastered/ pointed surface and applying two coats of cement base paint on walls including complete all as specified and directed. |
| 18 | M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed. |
| 19 | M&L for preparation of the newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of primer including a layer of 1mm thick wall care putty on wall surfaces to lsmooth the surface complete all as specified and directed. |
| 20 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness(below or above ground level) etc.complete all as specified and directed. |
| 21 | Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed. |
| 22 | Dismantiling of stone slabs and tiles of any description or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 23 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. over and including 15 mm thick cement screed bed in CM (1:6) , set and jointed in neat cement slurry and pointed in white or coloured cement to match and pointed in white or coloured cement to match the colour of tile complete all as specified and directed. |
| 24 | M&L vitrified ,coloured and printed tiles of size 600 mm x 600 mm x 10 mm thick as in flooring over and including 15 mm thick cement screed in (1:6 ) CM set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 25 | M&L for non skid coloured ceramic tiles, joint free, coloured tiles 9 mm to 10 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed. |
| 26 | M&L for machine cut Kota stone slab 18 mm to 20 mm thick , as in flooring with border, laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6 ) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 27 | M&L for machine cut Kota stone slab 18 mm to 20 mm thick , as in flooring with border, laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6 ) complete all as specified and directed. Please Enable Macros to View BoQ information |
