|
| 1 | (A) Fire Fighting SystemSupply, installation, testing & commissioning of Single Headed, Gunmetal ISI marked oblique pattern hydrant landing valve with 100 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with plastic cap and GI chain, twist release type plug and all accessories as per IS:5290-1983 (Type 'A'). |
| 2 | Supply, installation, testing & commissioning of First-Aid fire hose reels wall mounting swinging type, fitted with of heavy duty mild steel construction with CI brackets, 25 mm dia. ball valve and 20 mm dia. x 36m long high pressure Hose Reel tubing as per IS:444 with Stainless Steel shut-off nozzle having 5 mm dia. orifice. The hose reel shall strictly confirm to IS:884-1985. |
| 3 | Providing and fixing 63mm dia 15m long non percolated rubberized fabric lined hose including gunmetal male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects, hose shall conform to IS:636 type II and coupling to IS:903-1975 (ISI marked) |
| 4 | Providing and placing in proper position gunmetal 63mm dia short size branch pipes with 20 mm dia nozzles with 63mm instantaneous coupling ISI marked (IS:903). |
| 5 | Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete. |
| 6 | Providing and fixing fully glazed MS fully welded construction double leaf door shutter for Internal fire hydrant station fabricated from MS 50x50x6 mm angle iron frame, fixed to wall and hinged MS 40x40x5 mm angle iron door shutter with required MS sash bars for glazing complete with locking arrangements, stove enamelled fire red finish with 'FIRE HYDRANT' written in front. Approximate size 2100x1200 mm. |
| 7 | Providing and fixing 2-way gunmetal fire brigade inlet breaching head as per IS:904 specification tested for 20Kg/sq-cm with 63mm dia instantaneous type inlet and 150/100mm dia flanged outlet with built in check valve for fire brigade connection to under ground tanks and fire risers including companion flanges including nuts, bolts & washers etc. |
| 8 | Supply, installation, testing & commissioning of Gun Metal Fire brigade suction hose coupling (Draw-out Connection) with nut for female coupling as per IS:902-1974 complete with 100 mm dia. GI suction pipe and 100 mm dia. 1 No. CI foot valve flanged (to be connected to static water tank). |
| 9 | Providing and fixing External MS cabinet (to enclose above Draw-out/Fire brigade inlet connections) fabricated from 16g sheet with full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and suitably mounted on a raised masonry platform as required (Approx.0.6 m x 0.6 m x 0.45 m). |
| 10 | Supply, installation, testing & commissioning of pressure gauges with isolation cocks and chrome plated copper pipes as hydrant station to read pressure from 0-25 kg/cm2 complete and of dial dia 150 mm. |
| 11 | Supply, installation, testing & commissioning of Hydraulically Operated Alarm Check Valve 100mm dia with water alarm gong and complete with necessary fittings & supports |
| 12 | Supply, installation, testing & commissioning of 25mm dia automatic air release valves sprinkler ring main as per standard fire practice. |
| 13 | Providing, fixing, testing and commissiong of electrically operated flow indicating switches with threaded connection for a minimum flow of 90 lpm for indicating water flow in sprinkler branch line on each floor with necessary junction box installed in accessible place on 150/100 mm Line |
| 14 | Internal PipingSupply, installation, testing & commissioning of Black steel pipe (IS:1239 Part-I) heavy C-class including cutting, threading, welding etc. bends, elbows reducers, clamps, hangers etc. including cutting holes in brick or RCC walls/slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. MS rods, angles channels, slotted angle, etc., cutting to sizes, drilling welding fixing to insert plates, including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and red shade including all steel work. a) 100 mm dia |
| 15 | b) 80 mm dia |
| 16 | C) 25 mm dia |
| 17 | Providing and fitting of Rock wool insulation of thickness 50 mm for external piping and internal (exposed) held by chicken mesh along with aluminium cladding of 24 Gauge,Min density 42 kg/cubic metre,100 mm dia |
| 18 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate of nominal size 40 mm in thrust blocks at bends, tees etc and alsos as support to vertical pipes of yard hydrants including excavation and refilling of earth work centering and shuttering for concrete complete in all respects. |
| 19 | Supply, lnstallation, testing & Commissioning. of Electrical Motor Diven Automatic pressurisation pumping set Terrace Pump (factory Fitted) consisting of the following as per specifications.a) Providing and fixing of horizontal split casing / End Suction single/multi stage, single outlet Terrace punping set with bronze impeller & with gland capable of delivering 450 LPM against at total head of 35 M with Cl. body and connccted by a flexible coupling to a totally cnclosed fan cooled induction motor mounted on a common structural base plates with all punp accessories complete as per specifications including pressure gauge with gunmttal isolation valves and anti vibration pads, motor to be suitable for 415 volts, 3 phase, 50 cycles AC supply (Specification as per fire fighting requirements).b) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 volts ±15%, 3 phase 50 Hz AC supply of suitable capacity (approx. 15 KW) for the above pump with synchronous speed of 1500/3000 RPM confining to IS:325 & duly coupled with above pump coupled with flexible coupling inciuding earthening as per relevant Indian Standard and specifications.c) Common bed plate for mounting pump and motor fabricated of suitable MS channel as per manufacturer's recommendations. |
| 20 | Providing and fixing motor conrol centres fabricated out of l6 gauge M.S. sheet with powder Coated finish. The control panels should he compatible with HP. of the motor as under and as per specitications with automatic star delta starter.One incoming main isolation MCCB TPN of Min. 100 Amps. rating. Fully taped aluminium bus bar of required capacity in a separate bus bar chamber. Isolation MCCB of required rating and with push button automatic starter as per requirement with and ON/OFF indicating lights for One pump of 20 HP Single phasing preventors of suitable rating for motor.Rotary type Auto/Manual/ ON/OFF selection Switches.One 96 mm square panel type voltmeer reading 0-500 V with rotary selector switch for reading voltage between phases.One 96mm square panel type Amp. meter reading 0-500 Amp. for pump.Appropriate etched plastic plate for each starter/switch. |
| 21 | Providing, fixing, testing and commissiong of double flanged vertical air vessel fabricated from 10mm MS plate with dished ends from 10 mm MS plate, outside with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality of pressure switches, pressure gauge and all other required accessories to operate commonly main fire pump drop of pressure, automatically at required pressure settingRecommended dia. : 450mmHeight of shell : 1600mmWorking pressure : 5.5 kg/cm2 Test Pressure : 10 kg/cm2 |
| 22 | Providing and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 5.5 kg/cm2 and test pressure 10.0 kg/cm2 with unit control including nuts, bolts matching flanges (screwed or welded) complete with 1.5mm thick compressed asbestos gasket of same rating.100 mm dia |
| 23 | Providing and fixing CI double flanges Y suction strainer (PN 2.0) “Y” type including, nuts, bolts matching flanges (screwed or welded) complete with 1.5mm thick compressed asbestos gasket of same rating .100 mm dia |
| 24 | Providing and fixing butterfly valves, wafer end type class PN 1.6 as per IS: 13095-1991 or BS: 5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) & matching flanges (screwed or welded) complete with 1.5mm thick compressed asbestos gasket of same rating .A) 100mm Dia |
| 25 | B) 50 mm Dia |
| 26 | Providing and fixing of sluice valve of 1.6 PN rating flanged at both ends of following sizes including necessary nuts, bolts, gaskets etc. complete (without gear box) 100mm dia nominal bore. |
| 27 | Providing and fixing CI double flanged horizontal/ vertical type non-return valve including nuts, bolts,matching flanges (screwed or welded) complete with 1.5mm thick compressed asbestos gasket of same rating, complete to IS:5312, part-I, swing type, class PN 1.6.100mm dia |
| 28 | Supply, installation, testing & commissioning of 25 mm dia inspecting & testing assembly with gunmetal isolation valve, gunmetal sight glass, bypass valve & connected to drain line complete (excluding the cost of drain pipe) |
| 29 | Supply, installation, testing & commissioning of gun metal ball valve 50mm dia for flushing connection. |
| 30 | Supply, installation, testing & commissioning of gun metal ball valve 25mm dia. |
| 31 | Structural Steel like angles, channels etc at various locations for supporting Tanks, Valves etc |
| 32 | Providing and fixing liquid level controller for fire pump to cut off in case low level of water in tank including cables, pannel etc. and making necessary connection to panel and commissioning. |
| 33 | P/F of electrical cables from main incomer to control panel and from Control panel to Electric driven fire pump as per sizes given.3.5 Core x 35 Sq mm Al Cable. |
| 34 | Providing earthing station with GI Earthing Plate (600mm x 600mm) 8 mm thick for pumps and MCC panels including excavation, CI manhole cover and frame complete as per specifications and IE rules. |
| 35 | GI Strip of following sizes 25 x 6 mm G |
| 36 | Providing and Fixing of ISI marked (IS:15683:2006) protable CO2 type fire extinguisher type 4.5 kg capacity, including valve, discharge hose of not less than 10 mm dia and 1 metre long complete in all respects including initiall filled CO2 gas confirming to IS : 307 - 1966 & filled to a filling rate of not more than .667 and wall suspension bracket. |
| 37 | Providing and Fixing of ISI marked (IS:15683:2006) protable ABC type portable extinguisher of capacity 4 kg , dry powder type (Gas Cartridge) confirming to IS: 15683 : 2006 with cylinder initially fully charged with dry powder, ISI marked confirming to IS: 15683 : 2006 complete with stsndard discharge valve with tube , CI bracket for wall mounting. |
| 38 | Providing, fitting of total 10,000 ltr (5000 ltr x 2 No.) terrace HDPE tank with necessary connections and accessories.The Job also Includes foundations for all the tanks and interconnected pipes and valves as per requirement. |
| 39 | Supply and fixing of illuminated Fire exit signages. This sign may be used to Indicate all exits which can be used in the event of an emergency. It shall be accompanied: by an arrow as per IS-12349(1988) standards. |
| 40 | (B) Fire Alarm and Detection System.Supply,Installation,Testing and Commissioning of Miroprocessor based 4-Zone Conventional Fire Alarm Control panel with 2 hours battery back up with built in charger. |
| 41 | Supply,Installation,Testing and Commissioning of Conventional smoke Detector with builtin LED and mounting base complete with all connections etc as required. |
| 42 | Supply,Installation,Testing and Commissioning of Conventional Heat Detector operating at 54/57 C with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all the connections as required. |
| 43 | SITC of Conventional Manual Call point of MS construction in surface/recess with Stainless steel chain and hammer assembly complet with glass and push button as required. |
| 44 | SITC of Conventional type Electronic Hooter for alarm/evacuation signal and necessary fixing arrangements with key complete as required. |
| 45 | LSZH- 2 C X 1.5 Sq mm armoured cable |
| 46 | Supplying and Fixing of Following sizes of PVC Conduit along with Accessories in surface/Recess including painting in case of surface conduit,cutting the wall and making good the same in case of recessed conduit as required.25mm PVC Conduit Please Enable Macros to View BoQ information |
