|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. Ordinary rock |
| 3 | Dumping of stone for soling , including cost of stone. Complete job |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 gradedstone aggregate 40 mm nominal size derived from natural sources) |
| 5 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarses and : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landing, balconies, shelves, chajjas,lintels, bands, plain windows sills, stair cases above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform |
| 13 | Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:6 (1 cement : 6 coarse sand), cost of required centering, shuttering complete :1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 14 | 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) |
| 15 | 6 mm cement plaster of mix 1:3 (1 cement: 3 fine sand) |
| 16 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 17 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work ( two or more coats) over and including water thinnable priming coat With cement primer |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class kail wood |
| 19 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall bepaid separately) |
| 20 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. Pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 30mm |
| 21 | Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 23 | Carriage of cement and steel by MT over a lead of 150 km |
| 24 | Carriage of Sand and Agg. by MT over a lead of 40 km |
| 25 | Carriage of cement by Head load over a lead of 2 Km |
| 26 | Carriage of steel by Head load over a lead of 2 km |
| 27 | Carriage of sand and agg. by Head load over a lead of 2000 mtr |
| 28 | Carriage of stone by Head load over a lead of 2000 mtr |
| 29 | Providing wood work in frames of false ceiling ,partitions etc . Sawn and fixed in position :Budloo/Fir wood |
| 30 | Providing and laying mud concrete under wooden flooring all complete job: |
| 31 | P/F 12 mm thick ply with T&G panelling including polishing, complete job |
| 32 | Demolishing brick work manually /by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In mud mortar |
| 33 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : |
| 34 | Demolishing mud phaska in terracing and disposal of material within 50 metres lead |
| 35 | Wiring for light point, 6amp socket/exhaust fan point / call bell point /with 1.5 Sq.mm PVC FR insulated copper conductor single core in surface/recessed medium class PVC conduit, suitable size MS box and earthing the point with 0.75 Sq.mm. FR PVC insulated copper conductor single core cable as required. |
| 36 | Wiring for 16 amp socket outlet with 2.5 mm FR/PVC insulated copper conductor cable in existing recessed PVC conduit including sheet as required. |
| 37 | Supplying and fixing 0f 1’’ 3/4 pvc conduit capping along the accessories in surface / recessed including cutting the wall and making good the same in case of recessed conduit as required. |
| 38 | Supplying and fixing of 10 amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch ms box complete as required including connection.. |
| 39 | Supply and fixing of combined 3 pin 240 volt 20 amp. Socket outlet with safety shutter and 20 amp. 240 volt single pole mounted in recessed including complete MS box complete as required. |
| 40 | Supply and fixing of combined 3 pin 240 volt 10amp socket outlet with safety shutters and 10amp 240 volt single pole mounted in recessed including m.s box complete as required |
| 41 | 3 modular plate |
| 42 | 6 modular plate |
| 43 | Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required. A) Single pole 6/10/20 Amp |
| 44 | B) Double pole 63 Amp |
| 45 | Wiring for change over 63 amp. And installation with complete accessories and hole on the wall as required |
| 46 | Supply and fixing the following light fixtures including all accessories like electronic ballasts coms etc, complete as required concealed / tube lightning 20 watt 3000k, round led luminaries as per Philips |
| 47 | Supply of 1100volt grade aluminium conductor KPLE insulated pvc sheath arranged complete as per specification as required 25 sqmm |
| 48 | Supply and fixing of following single pole and netural sheet steel MCB distribution box 240 volts on surface recess complete with tinned busbar netural link earth bar, tin bar, detachable glaud plates, double door interconnected including pointing etc as required 8 way double door SPN |
| 49 | Supplying and fixing PVC concealed box/Junction box 4 way |
| 50 | Providing pvc conduits 1.5 inch for concealed box |
| 51 | Providing and laying in position cement concrete flooring of specified grade 1:2:4 (1 cement: 2 Sand : 4 Aggregate) including curing. |
| 52 | Providing and Fixing of plain bend of required degree:75 mm dia PVC |
| 53 | Providing and Fixing of plain bend of required degree: 100 mm dia PVC |
| 54 | Providing and fixing C.P Jalli |
| 55 | Providing and fixing soil, waste and vent pipes75 mm dia PVC |
| 56 | Providing and fixing soil, waste and vent pipes 100 mm dia PVC |
| 57 | Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed |
| 58 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylenerandom fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of jointscomplete as per direction of Engineer in Chajge. (Concealed work including cuttingchases and making good the walls etc.,) PN-16 pipe 25 mm OD (SDR-7.4) |
| 59 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylenerandom fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of jointscomplete as per direction of Engineer in Chajge. (Concealed work including cuttingchases and making good the walls etc.,) PN-16 pipe 32 mm OD (SDR-7.4) |
| 60 | Providing and fixing PPR Unions 25mm |
| 61 | Providing and fixing PPR Unions 32mm |
| 62 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Electroplast, Star, Lotus or Equivalent having valid ISI License) |
| 63 | Providing and fixing flow trap of PVC . |
| 64 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cisternwith manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 65 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixturescomplete. 10 litre capacity-White |
| 66 | Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China wash basin size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers. |
| 67 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 68 | Providing and fixing ball valve (brass) of approved quality complete : High or low pressure with plastic floats:15mm nominal bore |
| 69 | Providing and fixing C.P Brass angle valve for basin, mixer and geyser. |
| 70 | Providing and fixing of 1HP motor (KIRLOSKAR) complete job |
| 71 | Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 72 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 73 | Providing and fixing C.P Brass close hole basin mixer piller tape of approved quality and make 15mm nominal bore of Standard back type. |
| 74 | Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape(1500x450) mm. |
| 75 | Providing and fixing of Soap Dish (C.P Brass) with brackets etc. |
| 76 | Providing and fixing toilet paper holder : C.P. brass |
| 77 | Carriage of Cement by MT avg lead 60 Km |
| 78 | Carriage of Sand & Agg avg lead 40 Km |
| 79 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): for fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)for fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 80 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 81 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 Type II in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Prelaminated particle board with decorative lamination on both sides. |
| 82 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness |
| 83 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width |
| 84 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. complete as per direction of Engineer-in Charge Anodized (AC 15 ) aluminium tubular handle bar |
| 85 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 86 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Anodized(AC 15) aluminium Please Enable Macros to View BoQ information |
