|
| 1 | M&L for brick work with fly ash bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) etc including demolition of Brickwork built in cement mortar, all extra handling and disposal of debris and rubbish to low level area/500 mtr from site complete all as directed by the Engr-in-Charge.complete all as specified and as directed. |
| 2 | M&L for brick work with fly ash bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) e but except Bricks etc including demolition of Brickwork or stone/ boulder masonry built in cement mortar including stacking the serviceable brick for re-use, cleaning of brick , all extra handling and disposal of debris and rubbish to low level area/500 mtr from site complete all as directed by the Engr-in-Charge. |
| 3 | M&L for brick work with fly ash bricks old size straight or curved on plan to any radius in half brick thick wall built in cement mortar (1 : 4) etc inclduing Demolition of Brickwork built in cement mortar including all extra handling and disposal of debris and rubbish to low level area/500 mtr from site complete all as directed by the Engr-in-Charge. |
| 4 | M&L for Brickwork with fly ash bricks in half brick thick honey comb walling, built in CM 1:4 including demolition of Brickwork or stone/ boulder masonry built in cement mortar including , all extra handling and disposal of debris and rubbish to low level area/500 mtr from site complete all as directed by the Engr-in-Charge. |
| 5 | Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and directed. |
| 6 | M& L 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished smooth and even without using extra cement complete all as specified and directed. |
| 7 | M&L for rendering 10mm thick on fair faces of wall or conc surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 9 | M & L for preparing newly plastered surfaces of walls and applying three coats of white wash.on wall complete all as specified and directed. |
| 10 | M & L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over priming complete all as specified and directed. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed. |
| 12 | M&L, for PCC 1:2:4 type B-0 using 12.5 mm gradesd stone agg as in levelling course of floors of 25 mm thick complete all as specified and directed. |
| 13 | M&L dark coloured high glossy ceramic tiles 7 to 8mm thick (square/rectangular) polished area of each tile exceeding 0.36 sqm but not exc 1.00 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor including screed bed or bedding layer of mortar 15mm thick in cement mortar 1: 6 to receive tiles etc finished rough etc complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L coloured ceramic tiles 7 to 8mm thick (square/rectangular) polished area of each tile exceeding 0.18 sqm but not exc 0.36 sqm in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor including screed bed or bedding layer of mortar 15mm thick in cement mortar 1: 6 to receive tiles etc finished rough etc complete all as specified and directed. |
| 15 | M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor including screed bed or bedding layer of mortar 15mm thick in cement mortar 1: 6 to receive tiles etc finished rough etc complete all as specified and as directed. |
| 16 | M&L,Rendering 10mm thick in cement mortar 1: 3 on faces of brick work or concrete surfaces, finished rough to receive tiles etc complete all as specified and directed. |
| 17 | M&L for dark coloured high glossy ceramic tiles 7 to 8 mm thick (square / rectangular) polished area of each tile exceeding 0.36 sqm but not exc 1.00 sqm, in Vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc etccomplete all as specified and as directed. |
| 18 | M&L for ceramic tiles 7 to 8 mm thick (square / rectangular) polished area of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in Vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc etccomplete all as specified and as directed. |
| 19 | M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in vertical surface as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed. |
| 20 | M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.36 sqm, in vertical surface as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed. |
| 21 | M&L for joint free glazed coloured tiles 350x250x7mm/450x350x7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed |
| 22 | M&L for 15-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and directed. |
| 23 | M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement inclduing demolition of PCC and disposal of debris and rubbish to low level area/500 mtr from site complete all as directed by the Engr-in-Charge. |
| 24 | M/L for 40mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) without using extra cement including demolition of PCC in any description and in any position etc and disposal of debris and rubbish to low level area/500 mtr from site complete all as directed by the Engr-in-Charge. |
| 25 | M&L chequered tiles (Cement) 30cm X 30cm x 25mm set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over & including 20mm thick screed bed in CM (1:6) Demolition of chequered tile with screed bed in any description and in any position etc and disposal of debris and rubbish to low level area/500 mtr from site complete all as directed by the Engr-in-Charge. |
| 26 | M&L 60 mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey/White cement & no pigment including PCC 1:2:4, B0 using 12.5mm graded stone aggregate in all edges of interlocking complete all as specified and directed by the Engr-in-Charge. |
| 27 | M&L Coloured rubber moulded in any format 60 mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey/white cement & pigment including PCC 1:2:4, B0 using 12.5mm graded stone aggregate in all edges of interlocking complete all as specified and directed by the Engr-in-Charge. |
| 28 | M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring including demolition of PCC in any description and in any position etc and disposal of debris and rubbish to low level area/500 mtr from site complete all as directed by the Engr-in-Charge.complete all as specified and directed. |
| 29 | M&L, 50mm thick sand cushioning to under concrete interlocking paver block including watering & consolidation complete all as specified |
| 30 | Dismantling any bore, cast iron or reinforced concrete or PVC pipes for rain water ,drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.. |
| 31 | S & F 110 mm dia, PVC rain water pipes, single socketed, in any length with sealant rubber ring joints fixed in trenches/wall including MS flat Iron clamps of size (40 x 2mm) etc complete all as specified and directed by the Engineer - in - Charge. |
| 32 | Fixing only 110 mm bore PVC pipes in any length with rubber ring joints fixed to walls/trenches with necessary MS flat Iron clamps of size (40 x 2mm) (Pipes shall be obtained from taking down) complete all as specified and as directed.. |
| 33 | S & F 75 mm dia, PVC rain water pipes, single socketed, in any length with sealant rubber ring joints fixed to walls/trenches including necessary MS flat Iron clamps of size (40 x 2mm) all as specified and as directed by the Engineer - in - Charge. |
| 34 | Fixing only 75 mm bore PVC pipes in any length with rubber ringjoints fixed to walls/trenches fixed to walls with necessary MS flat Iron clamps of size (40x 2mm) complete all as specified and as directed. |
| 35 | S&F PVC bends any radius 110mm bore complete all as specified and as directed. |
| 36 | S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access door complete all as specified and as directed. |
| 37 | S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and as directed. |
| 38 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed complete all as specified and as directed. |
| 39 | Taking down chowkhat or frames with shutters of any type wooden/Aluminium/Steel (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and directed. |
| 40 | Taking down chowkhat or frames with shutters of any ype wooden/steel/Aluminium (without taking off shutters from the frame) but exc 1.5 and n.exc 4 Sqm each complete all as specified and directed. |
| 41 | Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each complete all as specified and directed. |
| 42 | Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each complete all as specified and directed. |
