Tender For Restoration Of Rain Damages To Lis Bahmi Nalah In Tehsil Bhunter Distt. Kullu (Sh:- Excavation ,Dismantling,Relaying,Spot Welding And Cast Steel Non Return Valves At Stage 3Rd Pump House Near Diyar)) Estimated Cost :- 303712 Earnest Money, Mandi-Himachal Pradesh
TDR : 55164802
Tender Notice
BOQ
5 Days Left
Mandi
Himachal Pradesh
Tender For Restoration Of Rain Damages To Lis Bahmi Nalah In Tehsil Bhunter Distt. Kullu (Sh:- Excavation ,Dismantling,Relaying,Spot Welding And Cast Steel Non Return Valves At Stage 3Rd Pump House Near Diyar)) Estimated Cost :- 303712 Earnest Money
Name of Work:- Restoration of Rain Damages to LIS Bahmi Nalah in Tehsil Bhunter Distt. Kullu (SH:- Excavation ,Dismantling,relaying,spot welding and cast Steel Non return Valves at stage 3rd pump house Near Diyar)) Estimated Cost :- 303712 Earnest Money :-6074 Time :- 2 months
Sl. No.
Item Description
1
Excavation in foundation trenches etc. in earth work lift up to 1.5 mtrs. Stacking the excavated soil not more than 3 metres away from the edge of excavation and then returning the stacked soil in 15 cm layers when required in to plinth and sides of foundations, consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in pick jumper work with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. in: -
2
DISMENTALLING OF BELOW MENTIONED MSERW PIPE INCLUDING ALL TYPES OF FITTING SUCH AS BENDS, TEES, AIR VALVES ETC. (EARTHWORK IN TRENCHES TO BE MEASURED & PAID FOR SEPARATELY) ALL COMPLETE AS SPECIFIED & DIRECTED BY THE ENGINEER-IN-CHARGE.
3
300 mm dia
4
350mm Dia
5
Relaying of Butt welding, laying and testing to levelled grades, IS marked Galvanised MSERW Pipes beveled ended of following dia mtr. / specifications confirming ISO:3183 ( with upto date amendments ) of steel grades X- 70, X-65, X-60, X-52,X-46 , X-42 , Grade-A and B jointing the pipes with butt welding at both end according to relevant BIS standards / approved specifications including manufacturing reducers/ tapers all short pieces , and bends as per site requirements and made from parent tubes ( to be measured and paid along with pipes ). Bends shall be manufactured in such a way that not more than 11-1/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Engineer-in -charge. The pipes and specials shall have in factory galvanized coating as per IS :4739 ( with latest amendments ) . The damaged portion of galvanization due to welding shall be provided with anticorrosive treatment by applying two coats of bituminous paint over priming coat as per AWWA specification C-203-1978 ( Earth work to be measured & paid for separately)
6
300 mm dia
7
350mm Dia
8
Providing and Fixing Cast Steel Non Return Valve (BS:5312) of dia mentioned below class PN-1.00 with Flange Table - 17 conforming to IS-9001-2000 or latest with upto date ammendments of Leader / Kirloskar / Kilburn/ Kartar make including cost of welding of companion flanges, nut & bolts, rubber insertions washers (gasket) etc. as per specifications complete in all respect in all leads and lifts and to the entire satisfaction of Engineer - in - Charge.
9
300 mm dia
10
350mm Dia
11
Spot welding, laying and testing to levelled grades, IS marked Galvanised MSERW Pipes beveled ended of following dia mtr. / specifications confirming ISO:3183 ( with upto date amendments ) of steel grades X- 70, X-65, X-60, X-52,X-46 , X-42 , Grade-A and B jointing the pipes with butt welding at both end according to relevant BIS standards / approved specifications including manufacturing reducers/ tapers all short pieces , and bends as per site requirements and made from parent tubes ( to be measured and paid along with pipes ). Bends shall be manufactured in such a way that not more than 11-1/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Engineer-in -charge. The pipes and specials shall have in factory galvanized coating as per IS :4739 ( with latest amendments ) . The damaged portion of galvanization due to welding shall be provided with anticorrosive treatment by applying two coats of bituminous paint over priming coat as per AWWA specification C-203-1978 ( Earth work to be measured & paid for separately)
12
300 mm dia
13
350mm Dia Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
