|
| 1 | Schedule 'A' B/R |
| 2 | Material & Labour for Pre-cast cement concrete block masonry (Type C-1, 1:3:6 (20mm aggregate) in with solid blocks, exc. 10 cm in width and setting in Cement Mortar 1:6, complete all as specified and directed by Engineer-in-charge. |
| 3 | Material & Labour for rendering 15mm thick on concrete surfaces in cement mortar 1:4 and even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge. |
| 4 | Material & Labour for 10mm thick rendering in Cement Mortar 1:6 to concrete surfaces trowelled to even & smooth w/o using extra cement, complete all as specified and directed by Engineer-in-charge. |
| 5 | Material & Labour for preparing surfaces plastered or un-plastered new surface of walls applying two coats of oil bound distemper over a coat of primer over layer of 3mm smooth Putty finish as per manufacture instruction with smooth roller finish, complete all as specified and directed by Engineer-in-charge. Note: - After painting, cleaning of all floors, glass & Furniture by own arrangement. |
| 6 | Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish two coats as per manufacture instruction with smooth roller finish, complete all as specified and directed by Engineer-in-charge. Note: - After painting, cleaning of all floors, glass & Furniture by own arrangement. |
| 7 | Supply & Fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (±0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding interlock (one vertical length in each shutter) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket. 1.2 ±0.2mm thick galvanized steel frame (30mm x 18mm) 2 Nos, sliding sash (30mm x 18mm) 2nos, sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100m long fastener. Hardware (touch lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate excludes cost of glass and includes all other connected accessories) area n.exc.2.00 sqm each fixed from ground floor to any height of floors complete all as specified and as directed by Engineer-in-charge. |
| 8 | Supply & Fixing 7mm thick aluminium grills of make \\"Deco grill\\" model DG 104 surrounded by aluminium 'C' channel and size of opening 75x75 mm, complete all as specified and directed by Engineer-in-charge. |
| 9 | Supply & Fixing factory made uPVC white colour fixed window/ventilator made of extruded profile with wall thickness of 2.3 mm (±2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (one vertical length in between two shutters) (60mm x74mm). Glazed bead (35mm x 20mm) will be mitered cut and fusion welded at all corners. Including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 ±0.2mm thick. Galvanized steel frame (28mm x 21.5mm), T profile (27mm x 17mm) to be inserted in repair profile. Frame will be fixed to the wall with 8mm x 100mm long fasteners. 5mm thick glazing with selected quality glass (Note: The unit rate excludes cost of glass and includes all other connected accessories.) area n. exc. 1.00 sqm each fixed from ground floor to any height of floors complete all as specified |
| 10 | Supply & Fixing 5mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-charge. |
| 11 | Supply & Fixing 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed by Engineer-in-charge. |
| 12 | Supply & Fixing 150mm long Extruded Aluminium alloy handles, fabricated type, and anodised, complete all as specified and directed by Engineer-in-charge. |
| 13 | Supply & Fixing 150mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-charge. |
| 14 | Supply & Fixing 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed by Engineer-in-charge. |
| 15 | Supply & Fixing 140mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door, complete all as specified and directed by Engineer-in-charge. |
| 16 | Material & Labour for granite (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including, grinding, polishing, moulding the edges and polishing and including over screed bed 20mm thick in cement mortar 1:6, complete all as specified and directed by Engineer-in-charge. |
| 17 | Material & Labour for precast RCC 1:2:4 Type-B1 (using 20mm graded crushed stone aggregate) as in Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weathering’s, throating etc. and setting in mortar complete with joints to match set in cement mortar 1:4, complete all as specified and directed by Engineer-in-charge. |
| 18 | Material & Labour for complete removal of old plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of smooth putty all as per the manufacturer’s instructions, complete all as specified and directed by Engineer-in-charge. |
| 19 | Material & Labour for preparation of new plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of smooth putty all as per the manufacturer’s instructions, complete all as specified and directed by Engineer-in-charge. |
| 20 | Supply & Fixing Harrison rails stainless steel (Curtain rod/drapery rod), 20mm dia, powder coated with and including fancy type bracket 2 Nos of each opening and side stopper fancy type powder coated of required shape and size 2 Nos of each opening, complete all as specified and directed by Engineer-in-charge. |
| 21 | Supply & Fixing in anodised aluminium snap grid frame work size of grid 605mm x 605mm for false ceiling, complete all as specified and directed by Engineer-in-charge. |
| 22 | Supply & Fixing Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed by Engineer-in-charge. |
| 23 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturer’s instructions, complete all as specified and directed by Engineer-in-charge. |
| 24 | Material and labour for powder coated Aluminium Anodised frame (minimum thickness of powder coating 50 micron) for door, sliding windows & ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and directed by Engineer-in-charge. |
| 25 | Material and labour for powder coated Anodised aluminium door/ window shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc., complete all as specified and directed by Engineer-in-charge. |
| 26 | Material and labour for Mild CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-charge. |
| 27 | -ditto- all as per item No. above, but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders, complete all as specified and directed by Engineer-in-charge. |
| 28 | Supply only liquid water proofing compound, complete all as specified and directed by Engineer-in-charge. |
| 29 | Supply & Fixing Joist, channel, Tube, angle, or tee sections, Fe-410-W(Gde- E-250) quality-B fixed independently, without connecting plates, etc., complete all as specified and directed by Engineer-in-charge. |
| 30 | Material & Labour for preparing new surface of steel of any desc over 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide, complete all as specified and directed by Engineer-in-charge. |
| 31 | Schedule 'A' E/M |
| 32 | Taking down carefully copper /aluminium point wiring (light, fan, socket or power point) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, socket, light fitting etc., removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition separately) and making good distribution surfaces of walls, floors, etc., complete all as specified and directed by Engr-in-charge. |
| 33 | Taking down unserviceable sub main wiring of any size and including PVC conduit and accessories & removing from site, complete all as specified and directed by Engr-in-charge. |
| 34 | Taking down electric connections and taking down old unserviceable MCB SPN/SP/TPN/MS, Meter Box, DB's etc., of any capacity, complete all as specified and directed by Engr-in-charge. |
| 35 | Point wiring complete with 1.5 sqmm single core PVC insulated but unsheathed multi-stranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non-metallic rigid PVC heavy duty concealed conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc., fixed concealed/ recessed in wall or ceiling etc., including 1.5 sqmm PVC insulated but unsheathed multi-stranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required modules for mounting of modular switches, sockets, switch sockets, fan regulators with required modules all as specified etc., for the following:- |
| 36 | One light point controlled by one, one way switch |
| 37 | One fan/Exhaust point controlled by one, one way switch |
| 38 | One 3 pin 6 Amps socket outlet on same board |
| 39 | One 3 pin 6 Amps socket outlet on independent board. |
| 40 | One 3 pin 16 Amps socket outlet on independent board with cable 4.0 sqmm |
| 41 | Material & Labour for Point wiring complete with 2.5 Sqmm single core PVC insulated but unsheathed multi-strand copper conductor FRLS cabIe 650/1100 Volts grade conforming to IS-694 drawn through PVC conduit (minimum 20mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part I) ISI marked with wall thickness not less than 1.8mm heavy duty including conduit accessories concealed pressed steel terminal boxes of size cover white/coloured including 2.5 Sqmm PVC insulated but unsheathed copper conductor FRLS cable as earth continuity wire for one 3 pin 15 or 16 Amps socket outlet on independent board, including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets with required modules, complete all as specified and directed by Engr-in-charge. |
| 42 | Supply & fixing modular switch 1 way, 6 Amps, 1 module (ISI marked), complete all as specified and directed by Engr-in-charge. |
| 43 | Supply & fixing modular switch 1 way, 16 Amps, 1 module (ISI marked), complete all as specified and directed by Engr-in-charge. |
| 44 | Supply & fixing modular socket, 6 Amps, 2/3 pin combined 2 module (ISI marked), complete all as specified and directed by Engr-in-charge. |
| 45 | Supply & fixing modular socket, 6/16 Amps, 2/3 pin combined 2 module (ISI marked), complete all as specified and directed by Engr-in-charge. |
| 46 | Supply & fixing modular fan regulator, 120 watt, 2 module (ISI marked), complete all as specified and directed by Engr-in-charge. |
| 47 | Supply & fixing in replacement of Smart motion LED Luminaires recessed/surface mounted 15 watt 6500K system efficiency having smart motion sense radius 4.5 meter, not less than 100lm/watt, thd<10% single phase including connecting cable from ceiling rose to terminal block of luminaires, complete all as specified and directed by Engr-in-charge. |
| 48 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed by Engr-in-charge. |
| 49 | Material & Labour for sub main wiring with two single core 2 x 4 Sqmm PVC (FRLS) insulated multi-stranded flexible copper conductor cable 660/1100 volts grade down in through including Concealed PVC Conduit with all accessories, PVC insulated 1 x 2.5 Sqmm single core single strand copper conductor as continuous earth wire in green colour connected to common earth dolly, complete all as specified and directed by Engr-in-charge.Note : 1. Two runs of cable, one run of earth wire, one run of PVC conduit will be measured and paid one unit. |
| 50 | Supply and fixing of VTPN Distribution Board Triple pole and neutral 4 way with standard bus bar, Din bar, Double door, and complete all as specified and directed by Engr-in-charge.Note:- Cost of cutting and modification in false ceiling deemed to be included in unit rate. |
| 51 | Supply and fixing of MCCB TPN 63 Amp, complete all as specified and directed by Engr-in-charge. |
| 52 | Supply and fixing of MCB TP 40 Amp, complete all as specified and directed by Engr-in-charge. |
| 53 | Supply and fixing of Sheet metal enclosure (factory made) double door for distribution board (when MCB's are to be used) Single pole neutral 240 V, 8 ways with 200 Amp rated bus bar connection with suitable size of thimbles, complete all as specified and directed by Engr-in-charge. |
| 54 | Supply and fixing of 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and Neutral current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed by Engr-in-charge. |
| 55 | Material & Labour for Earthing for poles and other machinery/eqpt using GI strip as earth lead and MS galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate is not less than 1.5 mtr below normal ground level connected to galvanized iron strips 32x6mm as Earthing lead with GI pipe, nuts, bolts and washers complete upto and including test point made out of 40x3mm GI flat, PCC pit of required size in PCC 1:2:4 type B-1 and RCC cover with frame, charcoal, common salt 15cm at round the earth plate watering pipe 20mm med grade/galvanized and 40mm dia GI pipe light grade for GI strip protected steel with funnel complete all as specified and directed as shown in electrical plate No 3 of SSR Part-I 2009, including taking down old unserviceable earthing, complete all as specified and directed by Engr-in-charge. |
| 56 | Supply & Fixing BEE five star rated BLDC energy efficient high-speed Metallic body ceiling fan having 1200mm blade sweep, air-flow not less than 215 CMM, 28W, operating voltage 140-285V and frequency 50 Hz, including fixed anchor fastener fan hook fixed with down rod of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan with smart remote control, complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated above rated complete with all accessories such as safety valve, thermostat, NRV, with Anchor fasteners of suitable size and including Flexible hot/cold connection Pipe -02 No’s, complete all as specified and directed by Engineer-in-Charge. |
| 58 | Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers (including drilling hole if required for fixing at wall), complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply and fixing exhaust fan made of sturdy Engineering plastic complete (including drilling hole if required for fixing at wall) with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specified and directed by Engineer-in-Charge. |
| 60 | Supply & fixing ceiling rose, surface Bakelite, 65 x 17mm three terminals (ISI Marked), complete all as specified and directed by Engineer-in-Charge. |
| 61 | Supply, fixing and install and testing hi wall split units indoor and outdoor complete with cordless remote control unit and within built air ioniser and plasma filter for better indoor air quality with minimum BEE 5 star rating of capacity 1.5 Ton Inverter type, electric driven, single phase, 230 Volt, Heavy duty outdoor unit mounting bracket/stand, complete all as specified and directed by Engineer-in-Charge.Make: Voltas /Carrier/Blue Star or equivalent make mentioned in Appendix ’B’. |
| 62 | Supply & Fixing for motor starter 2 module, Modular MCB 16 Amps 1 module including suitable for PVC Box 3 Module with Cover plate, complete all as specified and directed by Engineer-in-Charge.Make: Legrand, Cat no. 6730 30/ 6730 64/ or equivalent make mentioned in Appendix ’B’. |
| 63 | Supply & Fixing for Modular Socket 6A/16A - 2/3 pin 3 Module type, 240 Volts, including suitable for PVC Box 3 Module with Cover plate, complete all as specified and directed by Engineer-in-Charge.Make: Legrand, Cat no. 6730 95 or equivalent make mentioned in Appendix ’B’. |
| 64 | Material & labour for Sub main wiring with two runs of 4.00 Sqmm single core PVC insulated but unsheathed multi-stranded copper conductor FRLS 1100 Volts grade cable, drawn through and including PVC casing capping, wall surface, making good the disturbed surfaces of walls/ceiling/floor etc., including accessories and one run of 4.0 Sqmm single core PVC insulated but unsheathed multi-stranded copper conductor 1100 volts grade cable as earth conductor, complete all as specified and directed by Engineer-in-Charge.Note: All runs of cable and 1 run of conduit/casing capping shall be measured and paid as one metre length of unit. |
| 65 | Supply & fixing PVC Flexible AC Drain Pipe of tough Water Long Hose, extension Pipe for AC outlet drain water and leak resistant AC pipe cover casing, complete all as specified and directed by Engineer-in-Charge. |
| 66 | Supply and fixing voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 140 V to 280 V, with output voltage stabilized at 230 volt with accuracy of +/- 2.5% and of capacity 3 KVA, complete all as specified and directed by Engineer-in-Charge. Make: V-Guard / PIXEL / Aplab / Volina |
| 67 | Supply and replacement of existing limit switch operation speed .5mm-50cm/sec, operating frequency mechanical 120 operations/min electrical 30 operations/min, di-electric strength 1000 vac, 50 HZ, vibration 10-55Hz 1.5mm double amplitude model JG -XZ-8108 limit switch adjustable lever with roller including getting out cutting, welding and re-fixing on the same place 11mtr height above ground level, complete all as specified and directed by Engineer-in-Charge. |
| 68 | Supply and replacement of existing proximity switches & sensor made of nickel plated brass material, inductive type round model 3 wire set distance 4mm + 10%, standard detected object 15x15x1mm, 250 volts including getting out cutting , welding and re-fixing on the same place 11mtr height above ground level, complete all as specified and directed by Engineer-in-Charge. |
| 69 | Supply and replacement of existing panel on / off switch including taking down out and re-fixing on the same panel, complete all as specified and directed by Engineer-in-Charge. |
| 70 | Supply and replacement of existing panel hooter dimension 92x92x75mm, Ip20, Audio level 110db + 10%, tonne switch front and rear, 2 tone with LED flasher, 230 volt 50 HZ, model H 92S-XXX including taking down out and re-fixing on the same panel, complete all as specified and directed by Engineer-in-Charge. |
| 71 | Supply and replacement of existing steel cable hook with including getting out cutting, welding and re-fixing on the same place 11mtr above ground level, complete all as specified and directed by Engineer-in-Charge. |
| 72 | Servicing, checking and commissioning of all gate panel (8 panels) properly functioning on auto mode, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
