|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete : |
| 5 | 100x58x1.90 mm |
| 6 | 75x47x1.70 mm |
| 7 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 8 | 300x16 mm |
| 9 | 250x16 mm |
| 10 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 11 | 300x10 mm |
| 12 | 150x10 mm |
| 13 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 14 | 100 mm |
| 15 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 16 | Single rubber stopper |
| 17 | 12 mm cement plaster of mix : |
| 18 | 1:4 (1 cement: 4 fine sand) |
| 19 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 20 | Two or more coats (Old work) |
| 21 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 22 | Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : |
| 23 | 75 mm diameter pipes . |
| 24 | 100 mm diameter pipes . |
| 25 | Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : |
| 26 | 100 mm diameter pipes . |
| 27 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 28 | One or more coats on old work. |
| 29 | Finishing walls with water proofing cement paint of required shade : |
| 30 | Old work (one or more coats @ 2.20 kg/10 sqm) complete. |
| 31 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 32 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 33 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 34 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 35 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 36 | In cement mortar |
| 37 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 38 | Orissa pattern W.C Pan of size 580x440 mm |
| 39 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 40 | W.C. pan with ISI marked white solid plastic seat and lid |
| 41 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 42 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 43 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 44 | 10 litre capacity - White |
| 45 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings completea) Semi rigid pipe . |
| 46 | 32 mm dia |
| 47 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 48 | Rectangular shape 453x357 mm |
| 49 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 50 | 20 mm nominal outer dia. Pipes. |
| 51 | 25 mm nominal outer dia .Pipes. |
| 52 | 32 mm nominal outer dia .Pipes. |
| 53 | Providing and fixing uplasticised PVC connection pipe with brass unions : a) 45 cm length |
| 54 | 15 mm nominal bore |
| 55 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 56 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 57 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 58 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 59 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 60 | 75 mm diameter |
| 61 | 110 mm diameter |
| 62 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : |
| 63 | 100 mm diameter |
| 64 | Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. |
| 65 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 66 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 67 | 25 mm nominal bore |
| 68 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 69 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 70 | Trimming the branches of trees which are falling over the buildings by people using necessary tools ropes etc |
| 71 | Clearing leakage/ blockage to gully trap/floor trap including the cost of materials as directed by the Engineer-in-charge. |
| 72 | Cutting and removal of ficus saplings by dismantling integral water proofing compound/ cement concrete/ brick work in cement mortar etc including complete removal of its roots and making good the dismantled portion by using cement concrete 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) with water proofing compound etc all complete at all heights as per the direction of Engineer-in-charge at site. |
| 73 | Repairs to wooden false ceiling works up to Third floor level with following operations :- (i) Removing all the damaged / worn out false ceilng members / battens / planks from the frame work with out affecting the good one. ii) Providing and fixing with well seasoned wooden planks of thickness up to 12mm to match the existing wooden false ceiling with required screws, nails, glue etc to make good all complete as directed by the Engineer in charge. |
| 74 | Repair work of wooden pannelled doors/windows/cupboards and easening of same including taking out the shutter, providing new bottom rail with good quality wood of same species as exisiting door securing the rigidity of the joints by using additional clamps as required ,refixing after necessary repairs including the cost of new hinges if needed etc all complete as directed by the Engineer-in-charge. |
| 75 | Checking and attending minor repair work of plumbing and minor repair of taps around W/C, washbasin, sink etc including the cost of materials as directed by the Engineer-in-charge. |
| 76 | Removal of blockage and revamping of drainage manholes including connecting lines,repairs to side walls and cover. All complete as per direction of Engineer in Charge. |
| 77 | Providing & Fixing rigid PVC Door of size up to 0.90m width with 20mm thick Hollow pannelling section including necessary frame work, fittings,handles etc; all complete as per direction of Engineer in Charge. |
| 78 | Providing and fabricating 0.35mm thickness precoated galvanised iron profile sheet roofing over steel roofing structure in S/Q at CTO Compound of plan area size 5.30m x 2.45, by provinding 80mm outer dia GI \\"B\\" class pipe vertical support to a spacing of 3.2m centre to centre and required number of rafters using 100 x 50 mm-16 gauge MS-tubular section with purlins of MS-tubular section of size 50 x 25 mm-16 Gauge to the spacing of 0.75m centre to centre. The Trafford sheet to be fixed with self drilling patt screws, painting the frame work with synthetic enamel paint over a base coat of epoxy primer etc; all complete as directed by the Engineer in charge. (The rate inclusive of all material, labour charges, conveyance, scaffolding charges & 18% GST etc;). |
| 79 | Labour charges for cleaning of cement and ceramic tiled floors and dado using necessary cleaning solution including filling of holes with cement paste mixed with matching pigment including deep cleaning , walls, Floors etc by using cleaning detergents as directed by the Engineer-in-charge (Including cost of all materials). |
| 80 | Labour charges for laying available precast slab in the rear side of S/Q (ie) work area by levelling the base surface to the required slope and laying properly with out undulations and pointing with cement mortar 1: 3 (1 cement: 3 fine sand) etc; all complete as directed by the Engineer in charge. |
| 81 | Credit to unserviceble material such as Brass unserviceble bib/stop cocks / pillar taps Please Enable Macros to View BoQ information |
