|
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : b)All types of Ordinary rock including all types of laterite rock, blasting prohibited |
| 2 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. a All kinds of soil |
| 3 | Earthwork in surface excavation not exceeding 30 cm depth(but exceeding 1.5 m width as well as 10 sq.m on plan) including disposal of excavated earth beyond work site for all leads lift disposed earth to be leveled and neatly dressed in: b Hard soil |
| 4 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 5 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: a) All works upto plinth level |
| 6 | Centering & shuttering including Strutting, Propping & removal of forms for : Foundations, Footings, Bases for columns |
| 7 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. |
| 8 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 9 | Providing & laying of minimun 80mm thick factory made Shot blasted cement concrete Interlocking paver blocks of minimum M40 and above grade made by heavy duty block making machine with strong vibratory compaction and of approved size and design/ shape laid in 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all completed as per the direction of Engineer-incharge. The product should comply with IS 15658: 2006 and manufactured by ISO 9001: 2008 certified plant.1)Size: 210mm x 150mm x 80mm thick (Type: Rectangular Type Pavers) |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 11 | Supplying and fixing Pre-cast cement concrete kerb-stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification.a)Size 30 cm L x 50 cm H x 15 cm T |
| 12 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 13 | Providing & fixing of Seater made of cast iron and powder coated Complete as per direction of Engineer-In-charge, manufacturer’s specification & drawing. |
| 14 | Providing and fixing of a Artificial Cricket Pitch |
| 15 | MONIA TILES |
| 16 | Supplying and installation, fixing 'NYLON NET' all around verticle net garware make or it's equivalent 50mmx50mmx2.50mm thick as approved by the engineer-in-charge.Top Net 50x50mm x1.75mm thick.WireRope complete fixing of wire ropes of 5mm with turnbuckleand dog clips. etc. complete .( contractor has to bear all the cost and arrange all permissions for interstate transit of goods including storage of the goods). |
| 17 | Triangle Brush and Handy Turf Brush Set |
| 18 | SBR Enfield |
| 19 | Supplying and erecting integrated LED round burial light 6W IP65 & IK10class having pressure die-cast housing, having system lumens output of Min.500 Lumens, min. efficacy of 85 lumen/W, CRI>80, CCT upto 6500K,THD<10%, p.f. >0.90, operating range of 100-240V, inbuilt surge protection of2 kV, Life class of 50,000 Hrs at L50B50 , slat spray tested for 500 Hrs. includingmaking of recess of appropriate size for flushing into surface with minimum 2Year warranty as per specification No FG-ODF/PT. |
| 20 | Supplying and erecting integrated LED flood light fitting Max. 195W IP65 &IK07 class having pressure die-cast aluminium housing, having system lumensoutput of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCTupto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surgeprotection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with Ushaped bracket with minimum 2 Years warranty as per specification No. FGODF/FL. |
| 21 | Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 22 | Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories(a) Cat A. |
| 23 | Supplying and erecting Concealed type foot/step light Max. 5W having IP67, IK10rated Pressure die cast housing having system lumens output of Min. 500 Lumens, min.efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg.,THD<10%, SDCM<5, p.f. >0.95, operating range of 230-270V, surge protection of 2.5kV, Life class of 25,000 Hrs at L70B50, including driver by making necessary arrangement/ recess in wall to make it flush with surface with minimum 2 Year warranty. |
| 24 | Supplying and erecting integrated LED Post Top 45W IP65 & IK10 class having die cast aluminium housing with UV protected polycarbonate diffuser,having system lumens output of Min.4500 Lumens, min. efficacy of 105lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs at L50B50 ,including driver complete with minimum 2 Year warranty as per specification NoFG-ODF/PT. |
| 25 | Supply and erecting of 3 mtr high decorative pole with base plate and pole cap |
| 26 | Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.3 Core 4 sq.mm |
| 27 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 4 sq.mm |
| 28 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 50 sq.mm |
| 29 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required. |
| 30 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing masonry open duct, etc. complete as required |
| 31 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required |
| 32 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. |
| 33 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.. 4 Core 4 sq.mm |
| 34 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 Core 50 sq.mm |
| 35 | Supplying and laying (including excavation of suitable width & depth up to 90cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPEfor enclosing cable below ground/road surface, to required depth complete. |
| 36 | Supplying&erectingwatertightterminalboxof1.6mm(16gauge)CRCAsheetof size 200 x 150 x 150 mm. complete on pole as per specification No. CB-SB |
| 37 | Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 50mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested. The scope of work includes boring( 300mm dia mimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value. Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode(b) 2 metres length electrode |
| 38 | Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required |
| 39 | Supplying and laying 8 SWG copper wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required |
| 40 | Supply of Back fill Compound/ Groung resistance enhancement powder conforming to the enclosed specifications. |
| 41 | DESIGN 'Fabrication , Supply , Installation , Testing and Commissioning Of Outdoor LIGHT PANEL made out of 14 Swg CRCA sheet , Degreased , derusted and painted with two coats of red oxide primer and two coats of Siemens grey epoxy paint and conforming to IP 54 class of protection . The panel shall be suitable for three phase 415V , 50 Hz. , four wire AC system and shall comprise of the following :Auto Manual Swithc 1 Nos Street Light Control 32A 4Pole Contractor 4 Nos. Manual Control Switch with 4 No. / NC aux. contacts One Electronic timer with 10A output contactors for operating four contactors Timer unit shall be in a separate compartment with glass seal provision if any. And possible to adjust the time settings .3 phase meter and mcb arrangment with modem and as per ged requirement . Along with necessary stand and earthting brought forward for necesaary connection on both side of panel 'INCOMER'63 amps 4pole,36 KA MCCB, with neutral contactor,' selector switch shall be protected by 2 amps TP MCB's.' 1 .'Sets1'Breaker ON / OFF / TRIP indicating lights with control MCB’s.'Set1'RYB Lamp Mcb 'Set1'BUSBAR '100 amps ,415 V TPN 50 Hz Aluminium bus bars with heat shrinkable insulation sleeve.'Set 4 'DG INCOMER'63 amps 4pole,36 KA MCCB, ATS 63 A WITH 415 V TPN 50 Hz Aluminium bus bars with heat shrinkable insulation sleeve.'Set 4 OUTGOING '32 A 4 Pole MCB ,36KA 'Set1 'SPARE FEEDER'63 amps 4 pole MCB ,36 KA'Set 1 ,'25 amps 4 pole MCB , 36 KA 'Set1 , |
| 42 | DESIGN 'Fabrication , Supply , Installation , Testing and Commissioning Of Outdoor feeder pillar panel made out of 14 Swg CRCA sheet , Degreased , derusted and painted with two coats of red oxide primer and two coats of Siemens grey epoxy paint and conforming to IP 54 class of protection . The panel shall be suitable for three phase 415V , 50 Hz. , four wire AC system and shall comprise of the following : 'INCOMER'63 amps 4pole,36 KA MCCB, with neutral contactor,ON / OFF / TRIP indicating lights with control MCB’s.'Set1'RYB Lamp Mcb 'Set1'BUSBAR '100 amps ,415 V TPN 50 Hz Aluminium bus bars with heat shrinkable insulation sleeve.'Set 20 'OUTGOING '32 A FOUR Pole MCB ,36KA 'Set 35 '63 amps 4 pole MCB ,36 KA'Set 10 ,'25 amps 4 pole MCB , 36 KA 'SET 10 |
| 43 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(a) SP, Cat A |
| 44 | Supplying, erecting, testing and commissioning of diesel generating set withalternator of 58.5 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f.,A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder dieselengine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12hours, along with standard accessories, self-excited, self-regulated, screenprotected alternator with static excitation system running at 1500 RPM as per IS4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 andmaximum fuel consumption 9.98 ltr/hr @75% loading. Both the engine andalternator direct coupled on a common fabricated steel base frame and mountedon anti-vibrating pads, with standard control panel comprising meters,switchgears, indicators connected with suitable wires/cables, the complete setenclosed in composite acoustic enclosure as fully assembled integral unit made of16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75dB at 1.0 m, provided with first filling of oil, diesel not less than 150 ltr etc., on provided M20 grade CC foundation as per specification no. GEN-DG Please Enable Macros to View BoQ information |
