|
| 1 | (SCHEDULE-A PART-I B/R WORKS)Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm eachand n exc 4 sqm and removing from site complete all as specified and as directed. |
| 3 | Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and as directed. |
| 4 | Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion complete all as specified and as directed. |
| 5 | M&L for dismantling floor,hearth or wall tiling including cement mortar(but not backing (,removeing servicable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 6 | Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. complete all as specified and as directed. |
| 7 | S&F Pressed steel frames of size 125 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed. |
| 8 | S&F Pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed. |
| 9 | S & F for 35 mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with out sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed. |
| 10 | S&F for 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 11 | S&F powder coated aluminium frame work (min thickness of powder coating 50 micron) for doors, windows, ventiltors and partition, (sliding/openable/fix doors, windows, ventilator), etc with one, two or more rebates (reqd as per site), section weighing not less than 0.55 kg/m, including joining cleat for fixing with dash fasteners of required dia and size, incl filling up gaps at junctions, ie top, bottoms and sides etc complete all as sspecified and directed.. |
| 12 | S&Fpowder coated aluminium window and ventilator shutters, sliding/openable/fixed (as per required at site) type without sash bar, alu section weighing 0.55 kg/m, including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all specifiedand directed. |
| 13 | S&Faluminium power coated door shutters (sliding/openable/fixed (as per required at site) , aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all specified. |
| 14 | S&F for sheet glass palin/coloured (as per directed by Engr-in-charge) 3mm / 5 mm thick best quality and glazing with rubber packing, screws or glass putty in squares exc 0.5 Sqm each pane complete all as specified and as directed. |
| 15 | S & F for stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.40mm & fixed with tacks or screws, wire staples, etc complete all as specified and directed. |
| 16 | S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 17 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 18 | S&F 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed. |
| 19 | S&F for 125mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 20 | S&F 150mm long anodised aluminium handles, cast type complete all as specified and directed. |
| 21 | 300mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 22 | S&F Venetain blinds size 135 cm x 130 cm Complete all as specified and directed. |
| 23 | S&F 300 mm long mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 24 | S& F Floor door stopper of aluminium alloy body and tongue ,anodised ,with hard drawn steel spring ,fixed in floor overall length of cover plate 140mm complete all as specified and as directed. |
| 25 | S & F for PVC and cupboard shelf/ partition/ frame / shutter of 18mm thick side of panel externally impact perfact finish to the shutter and joined together with solvent cement adhesive 8mm thick (4mmx2)x12mm wide PVC sheet is used as gap insert for top & bottom rail, 18mm x 1mm PVC edge lipping is done on top & bottom side using PVC solvent cement adhesive, incl hasp and stable for locking purpose, etc complete as per direction of Engr-in-charge, manufacture's specification and drawing complete all as specified and as directed. |
| 26 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortor 1:6., etc complete all as specified and directed. |
| 27 | M & L for brick work with sub class 'B' modular bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick walls complete all as specified and directed. |
| 28 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement complete all as specified and directed.(Note:- Liquid water proofing compound to be measured paid separately) |
| 30 | M&L for rendering 5mm thick in ceiling CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 31 | Supply only integral water proofing compound complete all as specified and directed. |
| 32 | Dismantling of wall and ceiling boards( fibre,pulp,insulations etc) orinsulation boards/slabs/blankets any thickness including cover fillets complete all as specified and as directed. |
| 33 | Supply and fix GI frame snap grid frame work for for false ceiling E board size 600 x 600mm x 6MM, inserted in GI/Alluminium frame as in celing main Tee section of size 36.5 mm x 25 mm x 1.4 mm thick, cross Tee section of size 23.5 mm x 26.4 mm x 1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders complete all as specified and directed. |
| 34 | M&L for dismantling floor,hearth or wall tiling including cement mortar(but not backing (,removeing servicable tiles to store and rubbish off the premises complete all as specified and directed. |
| 35 | M & L 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified and directed. |
| 36 | M&L for scratch free vitrified light shade floor tiles 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface with and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. |
| 37 | All as per item no 36 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 an wall complete all as specified and directed. |
| 38 | M & L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 39 | M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed. |
| 40 | M & L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth complete all as specified and as directed. |
| 41 | M & L for preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant cement primer and over a coat of 2 to 3mm thick wall care putty complete all as specified and directed. |
| 42 | Material and Labour for apply two coats of Anti fungal weather coat acrylic emulsion paint over a coat of primer on new surfaces including 2 -3 mm thick wall putty, complete all as specified and directed. Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no clain on account of misunderstanding or otherwise shall be admissible on this account. |
| 43 | M & L for preparing new plastered surface on ceiling and applying three coat of white wash complete all as specified and directed. |
| 44 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of Oil bound distemper on walls over 2mm thick plaster of paris putty as specified and directed by Engr-in-Charge. |
| 45 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 2mm thick plaster of paris putty as specified and directed by Engr-in-Charge.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no clain on account of misunderstanding or otherwise shall be admissible on this account. |
| 46 | M&L for three coat of white wash on old surface on ceiling including preparation of surface complete all as specified and directed. |
| 47 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with providing 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.. |
| 48 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 49 | M&L plain cement concrete 1:3:6, type B1( using 20mm graded stone aggregate) 75mm thick as in plinth protection complete all as specified and directed . |
| 50 | Demolition of cement or lime concret in any despription along with tarfelt treatment in sunken portion / roof and cement mortar bedding from roof removal rubbish out side MD land complete all as specified and directed. |
| 51 | M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in sunken portion, subbase, etc complete all as specified and as directed. |
| 52 | M&L for rendering 10mm thick in CM 1:4 on roof suraces with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement complete all as specified and directed. |
| 53 | M&L for water proofing treatment to sunken portition / roof etc. in following sequence:- (i) Properly cleaning and drying the surface (ii) Applying a coat of bitumen primer @ 1.2Kg/Sqm and primer shall be allowed to dry over night. (iii) Laying APP based modified water proofing membrane of weight not less than 3kg per sqm and thickness not less than 3 mm, with 100mm overlaps, sealed and bonded to the surface by 'torchon' method (iv) Applying two coat of bituminous based aluminum painting @ 0.15 kg/Sqm each coat on water proofing treatment with preparation of surfaces complete all as specified and directed at site. |
| 54 | S&F in repair Viterous China wash hand basin white, flat back size 550 x 400 mm incl CI or Angle iron 50x50x6 mm brackets one No CP fancy Pillar tap 15mm bore , one No 32 mm dia CP waste coupling, one No 32mm dia PVC flexible waste pipe and one No 15mm bore 450mm long PVC connection complete all as specified and directed. |
| 55 | S&F vitreous china urinal bowl urinal flat back, size of 465x355x265mm white (min)with grating and union for discharge pipe, urinal spreader with waste pipe and all fiting for urinal complete all as specified and directed. |
| 56 | S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern ( including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified and as directed. |
| 57 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), including seat and cover white Pedestal pan and trap, connection to drain (or outgoing pipe) andto flushing pipe, antisyphonage pipe, etc.complete (excluding fixing bolts, flushing cistern and flush pipe) Wash down water closet (Pedestal pattern), complete |
| 58 | M&L in repairs PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and directed. |
| 59 | S & F in repairs PVC (SWR) nani trap / floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed. |
| 60 | S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 61 | S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 62 | S & F in repair 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 63 | S & F in repair 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 64 | S & F in repairs 110mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls / floor or in trenches complete all as specified and as directed. |
| 65 | S & F in repairs 75mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls / floor or in trenches complete all as specified and as directed. |
| 66 | S&F in repair Tubular towel rail 600mm long of 20mm chromium plated brass screws and wooden/plastic cleats complete all as specifed and directed. |
| 67 | S&F in repair 600mmx450mm beveled edge morror of selected quality glass mounted on 6mm thick AC building board with alu angle frameing and fixed to wooden plugs with chromium plated brass screws and cup washwers with hanging chips complete all as specified and directed. |
| 68 | M & L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 69 | Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified and directed . |
| 70 | All as per item no 69 above but 20mm bore complete all as specified and as directed. |
| 71 | S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed. |
| 72 | All as per item no 71 above but 20mm bore complete all as specified and as directed. |
| 73 | S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed. |
| 74 | S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed.. |
| 75 | S&F in repair CP mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and as directed. |
| 76 | S&Fixed in repair 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes complete all as specified and directed. |
| 77 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed. |
| 78 | S& F in repair Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl brass float valve 20mm dia and dismantling water tank complete all as specified and directed. |
| 79 | Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 grams) complete all as specified and directed. |
| 80 | S&F in repair stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and as directed. |
| 81 | M & L high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns,hookings ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, etc complete all as specified and directed. |
| 82 | M & L for formwork fair and finished surfaces to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc complete all as specified and directed |
| 83 | M&L Reinforced Cement Concrete M-25 using 20 mm graded stone aggr as in beams, bands, cantilvers, bressummers, linters, chajjas, etc over 1.5m span etc complete all as specified and directed |
| 84 | M&L for posts and struts in fencing of angle, tee including cutting tops to shape as directed, drilling holes, notching for wire, Y angles wall for fencing, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed etc complete all as specified and directed. |
| 85 | S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as complete all as specified & directed. |
| 86 | Fixing only galvanised 2 strand, steel barbed wire of any description (obtained from dismantling) and straining and fixing to any type of standard rails straining bolts, including aluminium paint and securing or tying at crossing with and provn of galvanised MS wire complete all as specified and as directed. |
| 87 | M&L in repair Providing and fixing concertina coil fencing with punched tape concertina coil 600mm dia 10 metre openable length , having 50 Nos rounds per 6 metre length, spring core wire (2.5 mm thick) of high tensile strength of 165 Kg/Sqmm with tape (0.52mm thick) and weight 43.478 gm/ metre and fixing the same with existing Y-shape dangle iron placed 2 mapartand with 6 horizontal R.B.T (Reinforced Barbed Tape) wire, stud tied with G.I staple and GI clips to retain horizontal, incld necessary bolts, complete all as specified and directed. |
| 88 | Demolition and breaking up 150mm dia drain pipes (Salt glazed ware, AC or reinforced concrete ) and set in cement mortar complete all as specified and directed. |
| 89 | M&L for concrete bed to drain pipes including packing under, and haunching against the sides of 150 mm bore pipes in cement concrete 1:3:6 type C-2 ( using 40 mm graded stone aggregate) after they are laid and tested complete all as specified and directed. |
| 90 | M&L for 150 mm bore salt glazed stone were (SGSW) drain pipe grade 'A' laid to slope in tranches and jointed in cement mortar (1:1) including necessary testing for ensuring teak proofing complete all as specified and directed. |
| 91 | M & L for Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or ¼ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 150mm dia of pipe complete all as specified. |
| 92 | S&F SFRC Manhole Cover of SIZE 1200X500X65mm thick with angle Iron Frame set in CM 1:4 complete all As specified and as Directed. |
| 93 | M & L for Providing precast cement concrete louvres and jallies 35mm thicktype B0 1:2:4(12.5mm graded stone aggregate) set in CM 1:4, 25mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed. |
| 94 | (SCHEDULE-A PART-II E/M WORKS)Taking down carefully coppper /aluminium point wiring (light, fan,bell,socket,and power) complete including all switch sockets ceiling roses switch boards regulator etc and disposal under schedule of credit and making good disturbed surfaces complete all as specified and directed. |
| 95 | Taking down carefully ceiling/exhaust fan any sweep any size, removing blades & Cleaning,and refix at site complete all as specified and directed. |
| 96 | Taking down MCB DB of any size incl MCBs of any size/any make and disposal under schedule of credit and making good disturbed surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
| 97 | Taking down MCB DB of any size incl MCBs of any size/any make and disposal under schedule of credit and making good disturbed surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
