|
| 1 | Dismantling kota, granite, cudappah stone slabs and interlocking tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortor complete all as specified and as directed. |
| 2 | M&L for machine cut Kota stone flooring 18 to 22 mm thick (size of kota stone slab 22\\"x22\\") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed. |
| 3 | All as per item No 2.00 here in before but 15-18 mm thick as in risers to steps and skirting laid over and including backing coat of 10mm thick in cement mortar 1:3 all as specified and as directed. Note : Risers provided to steps shall be in one piece. |
| 4 | M&L for machine cut Kota stone slabs 18 to 22 mm thick as in treads of steps of stair case in single piece with 2 nos V groove cutting laid over and including 10 mm thick cement screed bed in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, rounding and moulding edges, rubbing and mirror polishing complete all as specified and as directed. |
| 5 | M&L for machine cut cudappah stone slab 20-25mm thick for cooking platform etc including cutting chases in wall and fixing the slab in cement mortar including rubbing and polishing complete all as specified and as directed. |
| 6 | M&L 18 to 20mm thick pre-polished granite stone slab of approved shade and colour as in table top, top of WHB, kitchen slab/platform, gate pillars, cills etc or on vertical surfaces including vertical projection, urinal partition, including full round moulding the edge, laid over and including screed bed 15mm thick in cement mortar 1:4 jointing, pointing in white cement 1:2 using marble dust with admixture or pigment to match the shade of granite and rubbing, polishing to achieve mirror finish complete all as specified and as directed.Note : Colour and shade shall be as approved by GE. |
| 7 | M&L for 60mm thick, factory made, chamfered edge, cement concrete interlocking paver blocks (glossy/ rubber matt finish) of M-35 grade with approved colour, design & pattern of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as required size and pattern, finishing and sweeping extra sand; etc complete all as specified and as directed.Note : Size, shape, pattern and shade shall be as approved by Engineer-in-Charge. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed. |
| 9 | M&L for glazed coloured ceramic tiles in vertical surfaces as dado of size 450x300x6-7mm/300mmx600mmx6-7mm, thick set and jointed in neat cement and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 on other than fair faces of brick work etc complete all as specified & directed.Note: Color, size and shade shall be as approved by Engineer-in-charge |
| 10 | M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 etc complete all as specified & directed.Note: Color and shade shall be as approved by Engineer-in-charge |
| 11 | M&L for Vitrified tiles double charged (light shade) 9 to 10mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm (600X600 mm), as in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:6, complete all as specified and as directed.Note: Color and shade shall be as approved by Engineer-in-charge/GE |
| 12 | Ditto- all as per Item No. 11.00 above but as in dado/skirting or on vertical surfaces and jointed in neat cement and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 13 | M&L for non skid coloured ceramic mat finished tiles 7-8mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm (600X600 mm) in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed.Note: Color and shade shall be as approved by Engineer-in-charge/GE |
| 14 | Ditto- all as per Item No. 13.00 above but as in skirting set and jointed in neat cement and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 15 | M&L for Vitrified tiles double charged (light shade) 9 to 10mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but nexc1.00 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:6, complete all as specified and as directed.Note: Color, Size and shade shall be as approved by Engineer-in-charge/GE. |
| 16 | Ditto- all as per Item No. 15.00 above but as in dado/skirting or on vertical surfaces and jointed in neat cement and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 17 | Demoltion of cement concrete (un-reinforced) in ground floors and paving not exc 15cm thickness (below or above ground level) complete all as specified & directed. |
| 18 | M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and as directed. |
| 19 | M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed. |
| 20 | M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as levelling course in sub base of floors and pavings complete all as specified and as directed. |
| 21 | M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of floors and pavings complete all as specified and as directed. |
| 22 | M&L for Providing, cement concrete, type B0 1:2:4 (12.5mm aggregate) in roof kerbs or mud stops, rounded or chamfered on edges and the like including necessary formwork complete all as specified and as directed. |
| 23 | M&L for precast cement concrete block masonry with solid blocks of PCC (1:5:8), exc 10 cm width, built in cement mortar 1:6, with and including demolition of existing block work built in cement or cement lime mortar of any description complete all as specified and as directed |
| 24 | M&L for brickwork with fly ash bricks (old size), straight or curved on plan, exc 6 m mean radius, built in cement mortar 1:6 with and including demolition of existing brick work built in cement or cement lime mortar of any description complete all as specified and as directed |
| 25 | M&L for raised pointing to random rubble masonry, uncoursed or brought to course in cement mortar 1:3, including racking out joints etc. complete all as specified and as directed. |
| 26 | Taking down cement or cement lime plaster of any description on brick, block or stone walls etc (at any height) including racking out joints, hacking for key scrubbing down with water etc complete & removing debris outside MD land as directed. |
| 27 | S&F GI wire netting 0.90mm dia and 12mm size of mesh and fixed to wall, ceilings, beams etc including all laps and waste including making V groove in crack portion n exc 10mm deep and n exc 10mm wide and filled with cement mortar 1:3 and including rendering the surface area with 10mm thick CM 1:3 complete all as specified and directed. |
| 28 | M&L for 15 mm thick rendering in cement mortar 1:4 (using water proofing liquid as per manufacturers instruction) on other than fair faces of brick masonry surfaces or concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed. |
| 29 | M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement etc complete. |
| 30 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceiling finished the surface even & smooth without using extra cement complete all as specified & directed. |
| 31 | M & L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 32 | M&L for Preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified |
| 33 | M&L for preparation of new plastered internal surfaces of wall and applying two coat of acrylic distemper of required shade and colour over a coat of primer as per manufacturer's specifications in any colour complete all as specified and directed. |
| 34 | M&L for preparation of new plastered surfaces or previously untreated surface of wall and applying two coats of cement base paint over one coat of alkali resistant primer all as specified and as directed. |
| 35 | M&L for preparation of new wall surfaces and applying two coat of 100% premium exterior acrylic emulsion paint, alkali & fungal resistance, dirt resistance on over a coat of primer complete all as specified and as directed by Engineer-in-Charge.. |
| 36 | M&L for preparation of old decorated surfaces of walls (plastered or unplastered) by brooming down with coir wire brushing, scrapping down, smoke root, moulds, moss and including filling of cracks/holes by acrylic crack filler, removing unnecessary nails and applying two coats of acrylic distemper using roller complete all as specified and as directed by Engineer-in-charge |
| 37 | M&L for preparation of surface old or newly plastered surfaces of walls and applying minimum 2mm thick wall care putty in two layers including sanding of the putty surface after drying to achieve even and smooth finish for receiving painting complete all as specified and as directed. |
| 38 | M&L for preparation of old plastered or unplastered decorated ceiling surfaces including filling of cracks/holes by acrylic crack filler and applying one coat of acrylic distemper complete all as specified and as directed by Engineer-in-Charge. |
| 39 | M&L for complete removal of existing surface treatment from old, plastered or unplastered decorated wall surfaces and applying two coat of 100% premium exterior acrylic emulsion paint, alkali & fungal resistance, dirt resistance over a coat of exterior primer complete all as specified and as directed by Engineer-in-Charge. |
| 40 | M&L for complete removal of existing surface treatment from old, plastered or unplastered decorated wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge. |
| 41 | M&L for preparation of new wooden surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade over a coat of pink primer complete all as specified and directed. |
| 42 | M&L for preparation of old painted wood or wooden based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint on old complete all as specified and directed. |
| 43 | M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade over a coat of red oxide primer complete all as specified and directed. |
| 44 | M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 45 | Taking down shutter of any description exc 1 Sqm but not exc 2 sqm each complete all as specified and as directed. |
| 46 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 sqm each and making good the disturbed surface in CM 1:3 complete all as specified and directed. |
| 47 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 4 sqm each and making good the disturbed surface in CM 1:3 complete all as specified and directed. |
| 48 | S&F pressed steel doors frames of size 125 mm x 60 mm with one or more rebates including necessary fixing lugs and 100 mm hinges, hold fasts, lock strike plate, etc. including filling with PCC 1:3:6 type C0 complete as specified and as directed. |
| 49 | S&F 35 mm thick, second class hard wood glazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 50 | S&F 35 mm thick second class hard wood, factory made, plain framed panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part I) kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 51 | S&F factory made, solid PVC door frame of size 50mm x 47mm, made out of 5mm thick wood grain printed PVC sheet, reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing given in SSR 2009 Part I complete all as specified and as directed. |
| 52 | S&F factory made solid panel wood grain printed PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded wood grain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of wood grain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. |
| 53 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed. Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department. |
| 54 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush/panel door shutter of 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 55 | S&F powder coated aluminium door with frame and shutter in two panels (top and bottom) made out of aluminium sections (make Jindal or equivalent) including 5 mm thick sheet glass, aluminium cleats, rubber/ neoprene beading, all necessary fittings and locking arrangements etcall as specified and as directed and comprises of following sections :- (a) Vertical style- 47 x 44.5 x 2.25 mm thick @ 1.15 Kg/m (Min)(b) Lock rail- 114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min)(c) Bottom rail-114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min)(d) Frame-47.5 x 44.45 x 2.25 mm thick @ 1.12 Kg/m (Min) |
| 56 | S & F powder coated aluminum windows, three track, made out of aluminium sections including all necessary fittings, 5mm thick sheet glass (Two panels with 5mm thick glass covering full opening) and SS wire mesh (one panel with SS wire mesh of 0.36mm nominal dia of wire and average width of aperture 1.40mm covering half the opening), rubber/ neoprene beading, locking arrangements all as specified and as directed and comprising of following sections :- (a) Window frame: (i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Side - 20672 (Wt not less than 0.594 Kg/m)(b) Shutter: (i) Vertical (end)- 20669 (Wt not less than 0.548 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)Note: Shade shall be as approved by Engineer-in-Charge. |
| 57 | S&F mild steel ventilators, top hung type including steel handles and steel peg stay complete with glazing bars dovetailed or welded complete as specified in relevent IS all as specified and as directed. |
| 58 | S&F mild steel windows/ventilators, fixed type with glazing bars complete all as specifed and as directed |
| 59 | S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm as specified and directed. |
| 60 | S & F 200 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed. |
| 61 | S & F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed. |
| 62 | S&F 100 mm long SS butt hinges, medium weight, cold rolled and fixed with screws/welded complete all as specified and directed. |
| 63 | S&F 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and as directed. |
| 64 | S&F in repairs, 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work with external teak wood lipping 19mm x 6 mm thick with nails in shelves, cupboards shutter and similar works, complete all as specified and as directed. |
| 65 | S&F continous (Piano) hinges, brass finish of when open 30mm width of flaps complete all as specified and as directed. |
| 66 | S&F in repair magnetic catcher, Double strip (horizontal type), in cupboard/ward robe shutters including fixing wit necessary Stainless Steel screws etc. complete all as specified and as directed. |
| 67 | S&F in repairs mild steel helical door spring 300 mm long ordinary rat tail type including roller and roller plate fixed with screws to wooden frame complete all as specified and as directed. |
| 68 | S&F in repair drapery rod fancy type made out of 25mm dia MS PVC coated pipe having wall thickness 0.63 mm bright finish ,with decorative type hard plastic finial as end holders with 02 Nos MS brackets fixed with SS screws or rawl plug complete all as specified and directed. Please Enable Macros to View BoQ information |
| 69 | S&F in repair drapery rod fancy type made out of 25mm dia MS PVC coated pipe having wall thickness 0.63 mm bright finish ,with decorative type hard plastic finial as end holders with 02 Nos MS brackets fixed with SS screws or rawl plug complete all as specified and directed. Please Enable Macros to View BoQ information |
