|
| 1 | B/R Works |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | M&L for vitrified coloured Ceramic tiles 7to 8 mm thick light shade polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over 15 mm thick screed cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 4 | M&L for vitrified coloured Ceramic tiles 7to 8 mm thick light shade polished, area of each tiles not exceeding 0.36 sqm in skirting dado etc. over & including 10mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles, complete all as specified and directed. |
| 5 | M&L for verified Ceramic(Double charge) tiles light shade 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 0ver 15 mm thick screed cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 6 | M&L for verified Ceramic (Double charge) tiles light shade 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirting dado etc. over & including 10mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles, complete all as specified and directed. |
| 7 | M&L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed over 15 mm thick screed cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 8 | M&L for glazed ceramic, straight cut/joint free,7 to 8 mm thick colored tiles, area of each tile exceeding 0.13 sqm but not exceeding 0.19 Sqm on vertical surfaces such as dado etc over & including 10mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles, complete all as specified and directed. |
| 9 | Demolition of brick work built in cement mortar of any specification and in any position complete all as specified and directed. |
| 10 | M&L for Brick work in cement mortar 1:6 using fly ash bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed. |
| 11 | M&L for brickwork using retrieved subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), except bricks, complete all as specified and directed.Note : Old serviceable bricks retrieved from demolition vide srl item No 09 here in before shall be reused after proper cleaning & washing etc complete all as specified and directed. |
| 12 | M & L for fly ash Brickwork cement mortar 1:6 with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in etc complete all as specified and directed. |
| 13 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 14 | M&L for RCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate)as in chajjas / cooking shelves/platform etc. and the like including 5mm thick rendering in cm 1:3 finished even and smooth without using extra cement to the surface in contact with from surface complete all as specified and as directed by Engineer-in-Charge(The rate quoted by the contractor shall included for form work.) |
| 15 | S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 16 | Taking down cement plaster of any description on brick walls or concrete surfaces etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 17 | M & L for rendering 5 mm thick on brick or concrete surface of ceiling finished even and smooth in CM 1:3 complete all as specified and directed. |
| 18 | M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brickwork or concrete surfaces etc complete all as specified and directed. |
| 19 | M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brickwork or concrete surfaces etc complete all as specified and directed. |
| 20 | M&L for repairing of damaged swollen RCC surface like Projection Chajja, facia, parapet etc including necessary scraping , cutting, derusting and cleaning exposed reinforcement , washing apply cement slurry @ 3 kg/Sqm and finishing the surface with cement concrete (1;1.5:3) using 12.5 mm graded stone agg including provn of welded mesh having weight not more than 3 Kg/Sqm as reinforcement with and/or finished the repaired surface with cement and sand mortar (1:3) using WPC and work in Patches area n. exc 5 Sqm including necessary formwork complete all as specified and directed. |
| 21 | M&L for preparation of new plastered ceiling surfaces complete all as specified and applying the following: -(a) Applying wall care putty upto 1mm thick in two coats as required (multi purpose mixer shall be used for uniform and proper mixing of putty) on ceiling surfaces, (preparatory to paint as directed), complete all as specified and directed.(b) Priming plastered or unplastered surfaces of ceiling with alkali resistant priming paint by auto roller/ spray machine, complete all as specified.(c) Two coats oil emulsion distemper white or coloured by brush, auto roller/ Spray machine on ceiling surfaces(Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services) |
| 22 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of OBD including scrapping old surface of wall ,complete all as specified and directed. |
| 23 | M&L for Preparation of new plastered wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty 1mm thick, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of interior acrylic distemper over and including a coat of acrylic emulsion primer. |
| 24 | M&L for Preparation of new plastered wall surfaces of any description complete all as specified and applying the following: -a) Applying wall care putty 1mm thick , in two coats & smoothening the surfaces as specified. (preparatory to paint as directed).complete all as specified. (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer in disruptive/camouflaging pattern of six/four shades complete all as specified and directed. |
| 25 | M&L for Complete removal of existing treatment of any description, including preparation of wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty 1mm thick, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of interior acrylic distemper over and including a coat of acrylic emulsion primer. |
| 26 | M & L for preparation of old plastered surfaces of wall and applying two coats OBD including preparation of surface of wall ,complete all as specified and directed. |
| 27 | M&L for Complete removal of existing treatment of any description, including preparation of wall surfaces of any description complete all as specified and applying the following: - a) Applying wall care putty 1 mm thick, in two coats & smoothening the surfaces as specified. (preparatory to paint as directed).complete all as specified. (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer in disruptive/camouflaging pattern of six/four shades complete all as specified and directed. |
| 28 | M&L for Two coats of exterior acrylic emulsion over a coat of exterior (water based) primer on plaster surfaces of wall (New/Old), in disruptive/camouflaging pattern of four/Six shades including preparation of surfaces, for height not exceeding 12.00 metre, complete all as specified and directed. |
| 29 | M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over & including a coat of pink primer complete all as specified and directed. |
| 30 | M&L for Two coats of synthetic enamel paint over & including a coat of red oxide primer over steel & iron (new) surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed. |
| 31 | M&L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and directed. |
| 32 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and directed. |
| 33 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 34 | M&L for Granite (of any type) work, 20 mm thick (Table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4, including pointing in white cement 1:2, using marble dust with admixture of pigment to match with marble shade of Granite including half moulding of granite edges over 15 mm thick rendering in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 35 | M&L for Granite (of any type) work 20 mm thick (table rubbed and polished) for wall lining (veneering to wall) laid over 15mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 36 | Rounding off / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified and directed. |
| 37 | M & L for Machine cut kota stone slab flooring 20-25mm thick laid over cement screed base 20 mm thick (CM 1: 6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 38 | M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over screed base 10 mm thick (CM 1: 4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 39 | Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed. |
| 40 | M & L for 75mm thick Plain Cement Concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base etc complete all as specified and directed. |
| 41 | M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 42 | M&L for machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size ISI mark of 80mm thickness of M-40 Grade complete all as specified and directed. |
| 43 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) as in bed block of hold fast, coping including necessary formwork complete all as specified and directed. |
| 44 | M & L for 75 mm thick Plain Cement Concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), finished even and smooth as in plinth protection complete all as specified and directed. |
| 45 | M & L for 75 mm thick Plain Cement Concrete 1:2:4, type B-2 (using 40mm graded crushed stone aggregate), finished even and smooth as in Floor complete all as specified and directed. |
| 46 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 47 | S&F Solid PVC Wall Lining consisting of 5 mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame , PVC strips etc fixing as wall panelling up to ceiling level all are included as per specifications complete all as specified and directed. |
| 48 | M&L 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed. |
| 49 | S&F Powder coated Aluminium snap grid frame work 605 x 605 mm for false ceiling including all hanging arrangements with hangers 6mm dia GI ( upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified in clause 10.38.1 of MES Schedule Part-I complete all as specified and directed. |
| 50 | M&L for 4 mm thick asbestos fibre cement building board, cut to size and fixed in grid frame work ceiling as panels, etc complete all as specified and directed. |
| 51 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 52 | Taking down Chowkhats or frames not exc 1.5 Sqm each (without taking off shutters from the frames)complete all as specified and as directed. |
| 53 | Re-securing or easing and adjusting and also refixing builders hardware as required and renewal of screws etc of shutters of any description of exceeding 1.0 Sqm but not exc 2.0 Sqm each without taking down complete all as specified and as directed. |
| 54 | S&F Pressed steel frames of size 105 mm X 60mm made out mild steel sheet 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, 100 mm size butt hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC (1:3:6) type C-0 using 12.5mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed. |
| 55 | S&F Pressed steel frames of size 125 mm X 60mm made out mild steel sheet 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, 100 mm size butt hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC (1:3:6) type C-0 using 12.5mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed. |
| 56 | S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2004) etc complete all as specified and as directed. |
| 57 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and as directed. |
| 58 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II complete all as specified and directed. |
| 59 | S&F Steel windows made of MS sheet 1.25 mm thick box type (primer coated) ERW hollow ‘P’ section of size 60 mm x 25 mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1 mm thick & openable leaf consisting two Nos sash bars of ‘T’ section 20 x 3 mm complete welded to frame including cutting holes & making good dismantled portion in PCC 1:2: 4 type B1 four Nos for each window including following fitting welded to shutter ;- (a) Hold fast 150 mm long 12 mm x 3 mm made to shape -04 Nos(b) Handle of ‘Z’ section 20 x 25 mm , 100 mm long 01 Nos each leaf.(c) MS tower bolt 150 mm long 02 Nos each leaf.(d) ‘Z’ section 20 x 25 mm , 100 mm stopper-01 Nos each leaf.(e) Cleat 55 mm long of hollow square 15 x 20 x 63 mm welded to hinges-01 Nos per leaf.(f) MS box type hinges of size 75 x 12 mm -02 Nos per leaf.(g) Fabrication & fixing complete. |
| 60 | All as per item No. 59 but without galzing bars complete all as specified and directed. |
| 61 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete dovetailed or welded complete all as specified and directed. |
| 62 | M&L for Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 63 | M&L for Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/mtr including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, hydraulic floor/top door spring, snap beading screws etc. complete all as specified and directed. |
| 64 | M&L for powder coated aluminium window and ventilator shutters, aluminium section weighing 0.55 kg/mtr incl. necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, snap beading screws etc. complete all as specified and directed. |
| 65 | S&F Aluminium anodised grills of type DG 117 of make Deco-Grill, fixed to door/window opening complete all as specified and directed. |
| 66 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 67 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wire mesh shall be paid separately) |
| 68 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madefrom roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) |
| 69 | M&L for Sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.mm in each pane complete all as specified and directed. |
| 70 | M&F Sheet glass, 5.5 mm thickness ordinary quality and glazing in square but n. exc 0.5 sq. m in each pane complete all as specified and directed. |
| 71 | M&F Sheet glass, 5.5 mm thickness ordinary quality and glazing in square exc 0.5 sq. m in each pane complete all as specified and directed. |
| 72 | M&L for frosted glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc 0.5 Sqm in each pane complete all as specified and directed. |
| 73 | S&F in repair Mild steel PVC powder coated (coloured) curtain rod with fixing side brackets, end cups, rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as complete all as specified and directed. |
| 74 | S&F in repair Aluminium alloy body and tongue and roller plate floor door stopper of 150mm size fixed with steel screws including necessary bracket complete all as specified and directed. |
| 75 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless sheet cover governing pivot made of brass & other parts made of mild steel heavy duty complete all as specified and directed. |
| 76 | S&F in repair Brass mortice lock vertical type size 100mm, grade 1 with 2 duplicate keys of brass body 4 lever complete all as specified and directed. |
| 77 | S&F in repair aluminium body door closer hydraulically regulated, design no 2 universal type, suitable for door shutters of 701 to 1100mm in width complete all as specified and directed. |
| 78 | S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 79 | S&F 300 mm long Stainless steel, sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed. |
| 80 | S&F Aluminium tower bolt of extruded section, 200mm length of bolt and fixed with screws, complete all as specified and directed. |
| 81 | S&F Aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws, complete all as specified and directed. |
| 82 | S&F Stainless steel Butt hinges(100 mm long) medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 83 | S&F 125 mm size, aluminium (cast type) anodized, handle and fixed with screws complete all as specified. |
| 84 | S & F in repair grating doom 100 mm dia with waste hole of stainless steel complete all as specified and directed. |
| 85 | S&F in repair PVC(SWR) 75mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 86 | S&F in repair PVC(SWR) 110mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 87 | S&F in repair PVC(SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed in wall complete all as specified and directed. |
| 88 | S&F in repair PVC (SWR) bend 110mm dia radius complete all as specified and directed. |
| 89 | S&F in repair PVC (SWR) bend 75mm dia radius complete all as specified and directed. |
| 90 | S&F in reapir 75 mm dia outlet PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 91 | S&F in repairs Vitreous China wash basin, angle back, size 540x400mm white, including waste pipes and Waste coupling (40 mm) connection to existing pipe and tap including brackets complete all as specified and directed. |
| 92 | S&F in repair M&L 600x600 mm bevelled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC raw plugs with chromium plated brass screws and cup washers as complete all as specified and directed. |
| 93 | S&F in repair Vitreous China urinals, Half stall type white flush pipe, grating and Union for discharge pipe and urinal spreader of PTMT any colour for fixing with 15mm dia pipe complete all as specified and directed. |
| 94 | S&F in repair Vitreous china premium/ 1st quality wash down water closet (one piece) EWC white/ ivory/off white (closed pattern including all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern) complete all as specified and directed. |
| 95 | S&F in repairs Vitreous china white wash down water closet (pedestal pattern) including PVC sheet cover, Jet and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, complete all as specified and directed. |
| 96 | S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 97 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and guard rail complete all as specified and directed. |
| 98 | S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect complete all as specified and directed. |
| 99 | S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and complete all as specified and directed. |
| 100 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm, complete all as specified and as directed. |
| 101 | S&F in repair Bib tap of CP brass, 15mm bore, fancy type screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 102 | S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, but fancy type complete all as specified and directed. |
| 103 | S&F in repair 15 mm bore Angle stop valve of high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 104 | S&F in repair 125 mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass complete all as specified and directed. |
| 105 | S & F in repair stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 106 | S&F in repair towel rail, 20 mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs complete all as specified and directed. |
| 107 | S&F in repair 15mm dia brass CP mixer (pillar tap) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 108 | S&F in repair Galvanised iron steel water tubing, 15 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 109 | S&F in repair Galvanised iron steel water tubing, 20 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 110 | Disconnecting existing 500 ltr water storage tanks, setting aside for cleaning (cleaning and removing all scale and dirt etc., from tanks and from mouths of circulating pipes), etc. Hoisting if required reconnection and refixing in position complete all as specified and directed. |
| 111 | S&F in repair 3 layer rotational moulded polyethylene water storage tanks, 500 ltr Capacity (Cylindrical vertical with closed top) with and including 20 mm ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 112 | Disconnecting existing 1000 ltr water storage tanks, setting aside for cleaning (cleaning and removing all scale and dirt etc., from tanks and from mouths of circulating pipes), etc. Hoisting if required reconnection and refixing in position complete all as specified and directed. |
| 113 | S&F in repair 3 layer rotational moulded polyethylene water storage tanks, 1000 ltr Capacity (Cylindrical vertical with closed top) with and including 20 mm ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 114 | S&F in repair 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 115 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 116 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 117 | Maintenance of drain/nallah (cross section area n exe 1.5 sqm) by cutting all bushes shrubs, sarkness and any type of vegetation and desilting all deposit of soil and other material to have a free flow of water and to get a uniform trapezoidal/ rectangular shape of drain and removing all spoil outside MOD area at authourised dumping site declared by local administration etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 118 | Maintenance of drain/nallah (cross section area n exe 1.5 sqm) by cutting all bushes shrubs, sarkness and any type of vegetation and desilting all deposit of soil and other material to have a free flow of water and to get a uniform trapezoidal/ rectangular shape of drain and removing all spoil outside MOD area at authourised dumping site declared by local administration etc complete all as specified and directed. Please Enable Macros to View BoQ information |
