|
| 1 | Providing & fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting & making good the walls wherever required(Hindware/Cera/Parryware or eqivalvalent make) White Vitreous China wash basin 630 x450mm with a single 15mm C.P. brass pillar taps complete job. |
| 2 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (Hindware/Cera/Parryware or eqivalvalent make) |
| 3 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Orrisa pattern size 580 x 440 mm (Hindware/ Cera/ Parryware or eqivalvalent make)complete job. |
| 4 | Providing & fixing white vitreous china pedestal type (European type/ wash down type) water closet pan (Hindware/Cera/Parryware or eqivalvalent make)complete job. |
| 5 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre capacity-White complete job. (Hindware/Cera/Parryware or eqivalvalent make) |
| 6 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete: 10 liter capacity -White |
| 7 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete semi rigid pipe 32 mm dia |
| 8 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required . Kitchen sink without drain 610 x 510 mm with bowl depth 200 mm |
| 9 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350mm and 340 x 410 x 265mm sizes respectively with automatic flushing cistern with CI/MS brackets standard size of G.I. flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete including painting of fitting and brackets, cutting & making goods the walls & floors wherever required. One urinal basin with 5 litre P.V.C. automatic flushing of approved quality |
| 10 | Providing and placing on terrace (at all floor levels ) polythylene Water Storage Tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for intlet, outlet and overflow pipes but without fitting and the base support for tank (Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license ) |
| 11 | Providing and fixing 600 x 450 beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 12 | Providing & fixing unplasticised P.V.C. connection pipe with brass union 30 cm length 15mm nominal bore |
| 13 | Providing & fixing C.P. brass shower rose with 15 mm or 20 mm inlet 150mm diameter complete job. |
| 14 | Providing and fixing C.P hand spray with lever control (health faucet) and flexible hose 1 mtr long connection with C.P holder for hand spray complete in all respects as per direction of Engineer-In-charge |
| 15 | Providing and fixing Polyethelene-Aiuminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS:15450 U.V. stablised with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80°C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) eg. Elbows, tees, reducers, couplers and connectors etc. with clamps at one metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer-in-charge. (Internal work concealed with clamps at 1.00 meter spacingincluding cutting the chases and making good the wall etc.) |
| 16 | 1620 (20mm OD) pipe |
| 17 | 2025 (25mm OD) pipe |
| 18 | 2532 (32mm OD) pipe |
| 19 | Providing and fixing Polyethelene-Aiuminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to 15:15450 U.V. stabilised with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80°Cincluding all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e\\"g. Elbows, tees, reducers,couplers and connectors etc. with clamps at one metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge.Internal work-exposed on wall with clamps at 1.00 meter spacing |
| 20 | 1620 (20mm OD) pipe |
| 21 | 2025 (25mm OD) pipe |
| 22 | 2532 (32mm OD) pipe |
| 23 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-exposed on wall with clamps at 1.00 meter spacing. |
| 24 | PN-16 pipe , 40mm OD(SDR-7.4) |
| 25 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 26 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 27 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work.(Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc..) |
| 28 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 29 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 30 | Providing & fixing G.I. pipes complete with G.I. fitting and clamps including cutting and making good the walls etc.Internal Work-Exposed on wall |
| 31 | 15mm nominal bore Medium |
| 32 | 20mm nominal bore Medium |
| 33 | 25mm nominal bore Medium |
| 34 | Providing & fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc complete |
| 35 | 15mm nominal bore Medium |
| 36 | 20mm nominal bore Medium |
| 37 | 25mm nominal bore Medium |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing |
| 39 | 20mm nominal outer dia pipes. |
| 40 | 25mm nominal outer dia pipes |
| 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 42 | 20mm nominal outer dia pipes. |
| 43 | 25mm nominal outer dia pipes. |
| 44 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes |
| 45 | 75mm dia |
| 46 | 110 mm dia |
| 47 | 150 mm dia |
| 48 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/ accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion |
| 49 | 75mm dia Plain bend |
| 50 | 110 mm dia Plain bend |
| 51 | Providing and fixing15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 |
| 52 | Providing and fixing15 mm dia nominal bore C.P. brass long nose bib cock of approved conforming to IS standards and weighing not less than 810 gms |
| 53 | Providing and fixing brass bib cock of approved quality.15 mm nominal bore |
| 54 | Providing & fixing 15mm nominal bore C.P. brass angle valve for basin mixer and gyser points of approved for conforming to IS : 8931 |
| 55 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete |
| 56 | 15mm nominal bore |
| 57 | 20mm nominal bore |
| 58 | 25mm nominal bore |
| 59 | Supplying of Following Sanitary and Water Supply fittings:- |
| 60 | Inner face of approved quality |
| 61 | Disk face of approved quality |
| 62 | Jet of approved quality |
| 63 | Pillar Cock brass of approved quality |
| 64 | G.I Elbow 15mm of approved quality |
| 65 | G.I Elbow 20mm of approved quality |
| 66 | G.I Elbow 25mm of approved quality |
| 67 | G.I Socket 15mm of approved quality |
| 68 | G.I Socket 20mm of approved quality |
| 69 | G.I Socket 25mm of approved quality |
| 70 | G.I Tee 15mm of approved quality |
| 71 | G.I Tee 20mm of approved quality |
| 72 | G.I Tee 25mm of approved quality |
| 73 | G.I Reducer 15mmx 20mm of approved quality |
| 74 | G.I Reducer 25mmx 20mm of approved quality |
| 75 | G.I Reducer 15mmx 25mm of approved quality |
| 76 | G.I Elbow 15mmx20mm of approved quality |
| 77 | G.I Elbow 20mmx25mm of approved quality |
| 78 | G.I. Elbow 25mmx15mm of approved quality |
| 79 | G.I. Nipple 15x 50mm of approved quality |
| 80 | G.I. Nipple 15x 100mm of approved quality |
| 81 | G.I. Nipple 15x150mm of approved quality |
| 82 | G.I. Nipple 20 x 50mm of approved quality |
| 83 | G.I. Nipple 20x 100mm of approved quality |
| 84 | G.I. Nipple 20x 150mm of approved quality |
| 85 | G.I. Nipple 25x50mm of approved quality |
| 86 | G.I. Nipple 25x100mm of approved quality |
| 87 | G.I. Nipple 25x150mm of approved quality |
| 88 | White Cement 1 Kg pack of approved quality |
| 89 | Cistern Syphon of approved quality |
| 90 | Cistern Handle of approved quality |
| 91 | Cistern Vassel of approved quality |
| 92 | W.C. Seat Cover White/Coloured of approved quality |
| 93 | C.P. Nipple of approved quality |
| 94 | C.P. Grating of approved quality |
| 95 | C.P. Cup of approved quality |
| 96 | Towel Rod of approved quality |
| 97 | Towel Ring of approved quality |
| 98 | PVC Collar 75mm,100mm of approved quality |
| 99 | P.V.C Floor Trap of approved quality |
| 100 | P.V.C Tee of approved quality |
| 101 | G.I Check Valve of approved quality |
| 102 | P.V.C Cistern ball Cock of approved quality |
| 103 | Float Valve brass of approved quality |
| 104 | Tank Nipple of approved quality 25 mm , 20 mm |
| 105 | Waste Coupling of approved quality |
| 106 | C.P Soap Dish of approved quality |
| 107 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete |
| 108 | 100 x 10 mm |
| 109 | 150 x 10 mm |
| 110 | 200 x 10 mm |
| 111 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete |
| 112 | 100mm |
| 113 | 125mm |
| 114 | Providing & fixing aluminum sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to req. colour or shade with nuts & screws etc. complete: |
| 115 | 300 x 16mm. |
| 116 | 250 x 16mm. |
| 117 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Twin rubber stopper |
| 118 | Door closer Spring Type of approved quality |
| 119 | Door Closer Hydraulic of approved quality |
| 120 | Renewing Glass panes and refixing existing wooden fillets Float Glass Panes of thickness 4.0 mm (weight not less than 10 kg/ sqm) |
| 121 | Renewing Glass panes, with Putty & Nails wherever necessary float Glass Panes of thickness 4 mm (weight not less than 10 kg/ sqm) |
| 122 | Butt Hinges 3\\" of approved quality |
| 123 | Butt Hinges 4\\" of approved quality |
| 124 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material in cement mortar, all leads & lifts. |
| 125 | Demolishing cement concrete 1 : 3 : 6 or richer mix manually/ by mechanical means including disposal of material, all leads & lifts. |
| 126 | Demolishing RCC work manually /by mechanical means including stacking of steel bars and disposal of unserviceable material ,all leads & lifts. |
| 127 | Demolishing mud phaska in terracing and disposal of material including all leads & lifts. |
| 128 | Demolishing brick tile covering in terracing including stacking of serviceable material & disposal of unserviceable material including all leads & lifts. |
| 129 | Painting top of roofs with bitumen of approved quality at 17 kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm incl. cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of grade VG-10. |
| 130 | 10 cm thick mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35 kg/cum of earth and gobri leaping with mix 1 : 1 ( 1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 mixed with 2% of integral water proofing compound by weight of cement & finished neat with common burnt clay (non modular) brick tile of class designation 10.0 incl. all leads, lifts & carriage of material by MT/ H.L. |
| 131 | Providing & laying 400 micron thick transparent Poly Vinyl Chloride sheet on the roof under mud phaska cutting placing complete job. |
| 132 | Making Khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 Coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1 m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete incl. all leads, lifts & carriage of material by MT/ H.L. |
| 133 | Providing gola 75 x 75 mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 stone aggregate 10mm down gauge) including finishing with cement mortar 1:3 ( 1 cement : 3 fine sand) as per standard design in 75 x 75 mm deep chase incl. all leads, lifts & carriage of material by M.T / H.L. |
| 134 | Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope, relaying plaster gobri leaping and tiles and bricks, grouted in cement mortar 1:3 (1 cement :3 fine sand ) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) including all leads, lifts & carriage of material by MT / H.L. |
| 135 | Taking out doors, windows,windows and clerestory window shutters (steel or wood) of area of 3 square metres and below including stacking of material, all leads and lifts. |
| 136 | Dismantling old plaster or skirting, raking out joints & cleaning the surface for plaster including disposal of rubbish to the dumping ground with all leads & lifts. |
| 137 | Dismantling tile work for thickness of tiles 10 mm to 25 mm in floors and walls laid in cement mortar including stacking material, all leads & lifts. |
| 138 | Dismantling wooden trellis work excluding frames but including stacking the serviceable material including all leads & lifts. |
| 139 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking of area 3 sqm and below ,all leads & lifts. |
| 140 | Dismantling of flushing cistern of all types ( C.I /PVC/Vitreous china) incl. stacking of useful materials near the site & disposal of unserviceable materials incl. all leads, lifts & carriage of material by MT/H. L. |
| 141 | Dismentling C.I. or Asbestos rain water pipes of 100 mm dia pipes with fittings and clamps including stacking the material , all leads & lifts. |
| 142 | Removing mortar from brick work in cement mortar and cleaning bricks including stacking of material, all leads & lifts ( stacks of cleaned bricks shall be measured). |
| 143 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits & the like not exceeding 10 sqm on plan, including dressing of sides & ramming of bottoms , incl. disposal or filling of excavated earth wherever required as per the directions of Engineer-in-charge . |
| 144 | Providing & laying in position cement concrete 1:5:10 (cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size) of specified grade excl. the cost of centring & shuttering incl. all leads, lifts & carriage of material by MT/ H.L.- All work upto plinth level. |
| 145 | Providing and laying in position cement concrete 1 : 4 :8 ( 1 cement : 4 coarse sand : 8 graded crushed stone aggregate 40 mm nominal size) of specified grade excluding the cost of centring and shuttering including all leads, lifts and carriage of material by MT / H.L.-All work upto plinth level. |
| 146 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size ) including all leads, lifts and carriage of material by MT / H.L |
| 147 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1 : 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20 mm nominal size ) incl. all leads, lifts and carriage of material by MT / H.L |
| 148 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size ) including all leads, lifts and carriage of material by MT / H.L |
| 149 | Providing and laying damp proof course 40 mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) including all leads, lifts and carriage of material by MT/H.L. |
| 150 | Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 ( 1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) including all leads, lifts and carriage of material by MT / H.L. |
| 151 | Providing and laying dry stone agg. using 40mm nominal size incl. spreading, levelling,sand grouting, watering, ramming, etc all complete incl. all leads, lifts & carriage of material by MT / H.L. |
| 152 | Brick work common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curring in Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all shapes, leads, lifts and carriage of material by MT / H.L. in cement mortar |
| 153 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level incl. all leads, lifts and carriage of material by M.T. H.L. |
| 154 | Half brick masonry with bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 ( 1 cement :4 coarse sand) including all leads, lifts and carriage of material by MT / H.L. |
| 155 | Extra for half brick masonry in superstructure above plinth level upto floor V level including all leads, lifts and carriage of material by M.T. H.L. |
| 156 | 12mm cement plaster of mix 1:4 (1 cement : 4 fine sand) incl. all leads, lifts & carriage of material by MT / H.L. |
| 157 | 15mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand) including all leads, lifts and carriage of material by MT / H.L. |
| 158 | Repairs to plaster of thickness 12 mm to 20 mm with cement mortar 1:4 (1 cement : 4 fine sand) in patches of area 2.5 sq. metres & under including cutting the patch in proper shape ranking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. |
| 159 | Making plinth protection 50 mm thick of cement concrete 1:3 : 6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed & consolidated & grouted with fine sand including finishing the top smooth. Crushed aggregate including all leads, lifts and carriage of material by MT/H.L. |
| 160 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone agg. 20 mm nominal size) incl. all leads, lifts & carriage of material by MT/ H.L. . |
| 161 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). incl. all leads, lifts and carriage of material by MT/H.L. |
| 162 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete Thermo Mechanically Treated bars /Cold twisted bars including all leads, lifts and carriage of material by MT / H.L. |
| 163 | Centring and shuttering including strutting propping etc and removal of form work for |
| 164 | Foundations, footings, bases of columns etc. for mass concrete |
| 165 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 166 | Suspended floors, roofs, landings, balconies and access platform. |
| 167 | Edges of slabs and breaks in floors and walls under 20 cms wide. |
| 168 | Raking out joints in lime or cement mortar and preparing the surface for repainting or replastering including disposal of rubbish to the dumping ground with all leads and lifts. |
| 169 | Flush pointing with cement mortar 1:3 ( 1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska with non modular brick tiles |
| 170 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed & fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or with dash fasteners shall be paid for separately) |
| 171 | Sal Wood |
| 172 | 2nd Class Deodar Wood |
| 173 | Providing and fixing 35mm thick wire gauze shutters of Second Class deodar wood using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : |
| 174 | Providing and fixing 35mm thick glazed shutters of Second class deodar wood for doors, windows and clerestory windows using 10 kg/ sqm (4 mm thick) float glass panes including black enameled ISI marked M.S. butt hinges bright finished of required size with necessary screws. |
| 175 | Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with inecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class deodar wood |
| 176 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick , Particle Board 12 mm thick plain particle board flat pressed, three layer or graded wood particle board medium density grade IS: 3087 marked. |
| 177 | Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 2nd class teak wood beading 62 x 19 mm |
| 178 | Providing 40x 5 mm flat iron hold fast 40cm long incl. fixing to frame with 10mm diameter bolts nuts and wooden plugs with embeddings in cement concrete blocks 30 x 10 x15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size including all leads, lifts and carriage of material by MT / H.L. |
| 179 | Providing and fixing 16 mm thick gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen plateform,vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement:4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curring moulding and polishing to edge to give high gloss finish etc. complete at all levels Granite of any colour and shape(Area of slab upto 0.50 sqm) |
| 180 | Providing edge molding to 18 mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer- in -Charge. for granite work |
| 181 | Extra for providing opening of required size and shape for wash basins/ kitchen sink platform, vanity counters and similar location in marble/ stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. |
| 182 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% & confirming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1 : 4 (1 cement : 4 coarse sand) including grouting the joints with white cement & matching pigments etc. complete size of tile 60 cm x 60 cm including all leads, lifts and carriage of material by MT / H.L. |
| 183 | Providing and laying matt finished vitrified tile of specified size having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge. 300x300x9.8 mm |
| 184 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 185 | Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including all leads, lifts and carriage of material by MT / H.L. |
| 186 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge |
| 187 | Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Medium shade using 50% white cement and 50% ordinary cement. |
| 188 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate |
| 189 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : including all leads, lifts and carriage of material by M.T/ H.L.Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 |
| 190 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 191 | Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating, frames, guard bar, ladders railing, brackets, gates & similar works. |
| 192 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing & staircase railing and similar work including applying a priming coat of approved steel primer. G.I.pipes |
| 193 | Providing and fixing M.S. grills of required pattern in frames of windows etc with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete |
| 194 | Fixed to openings/ wooden frames with Rawl plugs screws etc. |
| 195 | Fixed to steel windows by welding. |
| 196 | Providing and fixing aluminum work for doors, windows ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, milted and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge( glazing, paneling and dash fasteners to be paid for separately.) |
| 197 | For fixed portion anodized aluminum (anodized transparent or dyed to required shade according to IS : 1868 minimum anodic coating of grade AC 15) |
| 198 | For fixed portion Powder coated aluminum ( minimum thickness of powder coated 50 microns) |
| 199 | For shutters of doors, windows & ventilators including providing and fixings hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required( Fittings shall be paid for separately). |
| 200 | Anodised aluminum ( anodized transparent or dyed to required shade according to IS : 1868, minimum anodic coating of grade AC 15) |
| 201 | Powder coated aluminum (minimum thickness of powder coated 50 |
| 202 | Providing and fixing glazing in aluminum door, window, ventilators shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.( Cost. Of aluminum snap beading shall be paid in basic item) With floating glass panes of 4.0 mm thickness ( weight not less than 10.00 kg/sqm) |
| 203 | Providing and fixing ACP sheet panelling 4.0 mm thick in Partition/doors of approved quality as per the direction of Engineer- in - Charge (Complete job) |
| 204 | Providing and fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade-I, Type-II conforming to IS : 12823 bonded with phenol formaldehyde synthetic resin, of approved brand and manufacture in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass / stainless screws etc. compete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. |
| 205 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws@ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment) |
| 206 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 207 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo em,possed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing & cover plates with brass pivot\\" & single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With Stainless Steel cover plate minimum 1.25mm thickness. |
| 208 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc.including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts & bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) complete job. |
| 209 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets. 25mm dia (heavy type). |
| 210 | Providing and Fixing of Powder Coated sheet 0.60mm thick for making shed of approved quality. |
| 211 | Providing and Fixing of PVC Panelling including cutting jointing, fixing etc complete job of good quality |
| 212 | Providing and Fixing of PVC false ceiling including cutting jointing, fixing etc complete job of good quality |
| 213 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 214 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats ) over & including priming coat with cement primer. |
| 215 | Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work. |
| 216 | Wall painting with acrylic emulsion paint of approved brand and manufature to give an even shade. Two or more coats on new work. |
| 217 | Wall painting with plastic emulsion paint of approved brand and manufature to give an even shade. one or more coats on old work. |
| 218 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.One or more coats on old work. |
| 219 | Painting with synthetic enamel paint of approved brand brand manufacture to give an even shade. Two or more coats on new work |
| 220 | Providing and applying White Cement based Putty of average thickness 2 mm of approved brand & manufacture, over the plastered wall surface to prepare the surface even & smooth complete. |
| 221 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work ( hard & soft wood) |
| 222 | Finishing walls with water proofing cement paint of required shade:Old work ( one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litres/10 sqm complete including cost of priming coat. |
| 223 | Finishing walls with water proofing cement paint of required shade:Old work (one or more coats applied @ 2.20 kg/10sqm) complete. |
| 224 | Finishing wall with water proofing cement paint of required shade - New work (two or More coats) applied @ 3.84 kg/10 sqm |
| 225 | Finishing wall with acrylic smooth exterior paint with required shade on New work (two or more coats applied) @ 1.67 litre/10 sqm over & including base Coat of water proofing cement paint applied @ 2.20 kg/10 sqm. |
| 226 | Finishing walls with Acrylic smooth exterior paint of required shade Old work ( two or more coats applied @ 1.67 litres/10 sqm on existing cement paint surface) |
| 227 | Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface . |
| 228 | Color washing such as green blue or buff to give an even. New work ( two or more coats) with a base coat of white washing with lime. |
| 229 | White washing with lime to give an even shade on New work (three or more coats) |
| 230 | White washing with lime to give an even shade : Old work (two or more coats) |
| 231 | Labour Charges for Carpentor/ Mason/Plumber/Electrician /Welder or equavailent skilled type |
| 232 | Labour Charges for Mazdoor/Helper |
| 233 | Hire charges of Welding/ gas welding set including cost of weding rods etc. |
| 234 | Providing and fixing wall to wall matting (complete item) |
| 235 | Providing and fixing wall to wall floor acrylic carpeting (complete item) |
| 236 | Supplying and filling at site Good earth including all leads, lifts and carraige of material. |
| 237 | Supplying and laying including digging, carrying by lorry, filling River Bed Material including watering & consolidation in layers to specified lines, camber, grades and cross sections. Finished work including material , labour all leads , lifts and carriage of material by MT/HL. |
| 238 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation7.5 bricks & S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design |
| 239 | Providing and fixing fire sheet for making toilet/bath unit/other partitions of approved quality |
| 240 | Construction of temporary toilets including arrangements of angles, fixing of angles & covering with polythene sheet including carriages, complete job . |
| 241 | Supplying and filling of stone dust at site, including all leads, lifts and carriage of material by MT / H.L. etc. complete |
| 242 | Supplying of Following Tent house items fittings:- |
| 243 | Hire Charges for Providing & installation of Shamiana of size 15-0// x 15/-0// with side curtain complete job. |
| 244 | Hire Charges for Providing and laying matting /red mat complete job. |
| 245 | Hire Charges for providing and installation of Table with paper roll etc.complete job, per No. per Day. |
| 246 | Hire Charges for providing and installation of Plastic Chairs complete job, per No. per Day. |
| 247 | Hire Charges for providing and installation of VIP Chairs complete job, per No, per Day. |
| 248 | Hire Charges for providing and installation of Pedestal fans Complete job, per No. per Day. |
| 249 | Hire charges for providing and installation of 3 seater VIP Sofa complete job |
| 250 | Hire charges for providing and installation of 2 seater VIP Sofa complete job |
| 251 | Hire charges for providing and installation of Portable Fan Complete job |
| 252 | providing and fixing plantex wall panels for interior wall décor/3D wall panel including cutting fixing of light panels etc complete job. |
| 253 | Providing and fixing PVC UV Golssy sheet wall panel for interior including cutting, fixing of light panels etc complete job. |
| 254 | Providing and fixing/writing of flex boards including proper anchoring legs/ stand (complete job) |
| 255 | Providing and fixing of sign boards of Iron sheet of size 3'x2' including painting, writing and embedding the legs in cement concrete including carriage to he site |
| 256 | Providing and fixing PVC pannelling for false ceiling incuding cutting, fixing of light panels etc complete job. |
| 257 | Providing and laying integral waterproofing treatment on concrete/masonry surface consisting of surface preparation, crack repair, bituminous priming, and APP membrane application complete as per specifications and direction of Engineer-in-Charge. |
| 258 | Providing and laying Dry Stone Aggregate using 40 mm nominal size incl. spreading, levelling, sand grouting, watering, ramming, etc all complete including all leads and lifts & carriage of material by M.T/H.L Please Enable Macros to View BoQ information |
