|
| 1 | Supply, installation, testing and commissioning of power distribution panels as per the detailed specification. (Refer Sec. V Part A) |
| 2 | 415V Class - IV power distribution panel -MDB1 at PIF as per dwg no.IGC/T-1900/01. |
| 3 | 415V Class - IV power distribution panel -MDB2 at PIF as per dwg no.IGC/T-1900/02 |
| 4 | 415V Class - IV power distribution panel -MDB1 at MINA as per dwg no.IGC/T-1900/03. |
| 5 | 415V Class - IV IP 54 Cable termination Box at PDC X as per dwg no.IGC/T-1900/04. |
| 6 | 415V Class - IV IP 54 Distribution Box at PDC X as per dwg no.IGC/T-1900/05. |
| 7 | Supply, open installation, testing and commissioning of the following sizes of VTPN DBs with MCCB & MCB on MS frame work (MS frame will be measured separately) as per the scope of work. (Refer Sec VI, Clause No.15.1). |
| 8 | DB VTPN 8 Way (8 Plus 24) IP 43 - IK 09 with 1No. 160A, 4 Pole DPX3 MCCB (for Incomer) and 5 Nos. 63A,3P MCB (for outgoing), Cat No:507747 or equivalent. The scope includes suply of 1 No. spare MCCB of same make and rating as per section V Part A) |
| 9 | Supply, open installation, testing and commissioning of following POWDER COATED TPN/SPN DB Enclosures with Double Door and per Phase isolation DBs consisting of Phase, Neutral and Earth Bus and interconnecting wires etc. as per the detailed specification and as directed by the Engineer-in-charge.(Refer Sec VI, Clause No.15.2). |
| 10 | 12 WAY TPN Vertical TIER Per Phase Isolation (PPI) DB, Cat No:DETPI012DD or equivalent |
| 11 | Supply and open installation of following sizes Cable end termination box at suitable depth in brick work as per the detailed specification and as directed by the Engineer-in-charge.(Refer Sec VI, Clause No.15.2.2). |
| 12 | VTPN,8 way Cable end box, Cat No: 5079 38 or equivalent suitable for VTPN, 8 way with MCCB incomer Distribution Board Cat No:5077 47 |
| 13 | TPN,12 way Cable end box, Cat No:DBTPI012CB or equivalent suitable for TPN, 12 way TPN TIER Per Phase Isolation Distribution Board Cat No:DBTPI012DD (Vertical) |
| 14 | Supply and Installation of laminated Hylam sheet of 3mm thickness over the boxes and as per the detailed specification. |
| 15 | Supply Installation testing and commissioning of the following MCB on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2). |
| 16 | 6-32 Amps SP MCB (Type-C) |
| 17 | 40-63Amps, FP MCB (TYPE-C) |
| 18 | Supply, and open installation of following sizes of Metal Clad Socket in sheet steel enclosure with Plugs and Socket including chipping and finishing as per the detailed specification.(Refer Sec VI, Clause No.15.4). |
| 19 | 20 AMPS DP Metra Plug and Socket DBs with 20Amps MCB |
| 20 | Supply and fixing following Modular front cover plate on existing modular metal/plastic boxes etc. as required. (Refer Sec VI, Clause No.15.7). |
| 21 | One/Two module |
| 22 | 3 Module |
| 23 | 4 Module |
| 24 | 6 Module |
| 25 | 1 Modular dummy plate |
| 26 | Supply, installation, testing and commissioning of following sizes of Wall Mounting Exhaust Fans including supply of Aluminium grill bracket with Stainless Steel Bolts for mounting of Exhaust Fan & Aluminium grill bracket and 3 Core, 1.5 Sq.mm (14/0.3) PVC insulated & FRLS sheathed copper flexible cable of required length as per the detailed specification. (Refer Sec VI, Clause No.17.2). |
| 27 | 300 mm Dia Turbo Heavy Duty Exhaust Fan |
| 28 | Supply fixing testing and commissioning of the following RCBOs on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2). |
| 29 | RCBO DP 25A sensitivity 30mA TYPE AC, 2Module |
| 30 | RCBO DP 32A sensitivity 30mA TYPE AC, 2Module |
| 31 | Assembling, installation, testing and commissioning of MCB DB enclosure already embedded in the wall including supply of Engraved Circuit Identification Plate and Danger Board as per the detailed specification for the following size of MCB DBs. (Refer Sec VI, Clause No.15.3). |
| 32 | TPN, 12 Way Distribution Board |
| 33 | Supply, installation, testing and commissioning of the following SDFU with factory made enclosure with 3Nos Fuse links on MS frame work as per the scope of work. (MS item will be measured separately). (Refer Sec VI, Clause No.14). |
| 34 | SDFU TPN 63A, DIN FUSES with 3Nos 63A HRC fuse links, Sheet steel enclosure FN Cat No:SK90484 |
| 35 | Supply, transportation, installation, testing and commissioning of the following Sensors as directed by the Engineer-in-Charge. (Refer Sec VI, Clause No.16). |
| 36 | Occupancy & day light PIR sensor suitable for lighting load of 500W and coverage 7.0 mtr diameter. The unit Shall have provision to adjust ON time as well as day light level for switching ON. (Refer Sec VI, Clause No.16.3). |
| 37 | Supply, installation, testing and commissioning of the following sizes of Metal Clad Socket in sheet steel enclosure with Plugs and Socket as per the detailed specification. (MS item will be measured separately). (Refer Sec VI, Clause No.15.4). |
| 38 | 32A 3P+N+E-FP Tempra plug and socket DBs with FP 20A-32A MCB |
| 39 | Supply, cleaning the floor, proper pasting and installation of following insulating mat as per specification. (Refer Sec VI, Clause No.25). |
| 40 | 2.0 mm thickness, Max useable voltage 3.3kV, AC Proof voltage 10kV for 3 minutes, AC dielectric strength 30kV RMS Insulating Mat confirming to IS:15652 |
| 41 | Supply, open installation, Assembling testing and commissioning of following type Tempra plug and socket DB and RCBO in sheet steel enclosure including chipping and finishing as per the detailed specification. (Refer Sec VI, Clause No.15.4). |
| 42 | 16A 2P+E-DP Tempra plug and socket DBs with 16A DP 30mA sensistivity RCBO |
| 43 | Supply and open installation of following Sizes of MS boxes as per the detailed specification. (Refer Sec VI, Clause No.15.10). |
| 44 | 300(W)X300(H)X120(D)mm,1.8mm thick sheet MS Box |
| 45 | Supply and Installation of following sizes of Surface Mounting Plastic Boxes as per the detailed specification. (Refer Sec VI, Clause No.15.6). |
| 46 | Surface Mounting Plastic Boxes 1/2 Module |
| 47 | Surface Mounting Plastic Boxes 6 Module |
| 48 | Surface Mounting Plastic Boxes 3 Module |
| 49 | Wiring for lights / fans /sensors/ Timer /Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW / Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, switches/ sockets, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.(Refer Sec VI, Clause No.18) |
| 50 | Wiring for Light/Sensor/Fan Points with 2 Runs of 1.5 Sq.mm copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm copper wire for Earth from MCB Distribution Board to Primary light/sensor/fan point through Control Switch Box including 10Amps modular switch. |
| 51 | Wiring for Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase & Neutral and Earth from MCB Distribution Board to Power point through Control Switch Box including supply of 16A modular switch, 6/16 Amps combined shuttered type Socket, 3Modular plate 1No. |
| 52 | Wiring for Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase & Neutral and Earth from MCB Distribution Board to Power point through Control Switch Box including 16A modular switch, 6/16 Amps combined shuttered type Socket and 10A modular switch & 3 pin, 6A shuttered type Socket, Modular Plate. |
| 53 | Wiring for Exhaust fan point up to 3Mtr height with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from MCB Distribution Board to Power point through Control Switch Box including supply of 3 pin 6A shuttered type Socket, 2Nos. 2 Modular plate and 1 No 10A modular switch. |
| 54 | Wiring for Power Points with 2 Runs of 4.0 Sq.mm Copper wires for Phase, Neutral and 1 Run of 2.5 Sq.mm Copper wires for Earth from MCB Distribution Board to Single Phase Metal Clad Socket. |
| 55 | Wiring for Power Points with 4 Runs of 6.0 Sq.mm Copper wires for Phase, Neutral and 2 Runs of 2.5 Sq.mm Copper wires for Earth from MCB Distribution Board to Three Phase Metal Clad Socket. |
| 56 | Wiring for lights / fans /sensors/ Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW/Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, switches/ sockets, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.(Refer Sec VI, Clause No.18) |
| 57 | Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to switch box and further to Light point including 1 No 10A modular switch |
| 58 | Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to Light point/Ceiling fan including 1 No 10A modular switch |
| 59 | Wiring for fan point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to Fan point including 1 No 10A modular switch and 1 No step type Fan regulator |
| 60 | Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Light point to Light point /sensor/contactor |
| 61 | Wiring for Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase & Neutral and Earth from Control Switch Box to control switch box including 10A modular switch & 3 pin 6A, shuttered type Socket and 16A modular switch & 6/16A combined shuttered type Socket, Modular plate |
| 62 | Wiring for lights / fans /sensors/ Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW / Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.(Refer Sec VI, Clause No.18) |
| 63 | Wiring with 1 Run of 1.5 Sq.mm Copper wire |
| 64 | Wiring with 1 Run of 2.5 Sq.mm Copper wire |
| 65 | Wiring with 1 Run of 4 Sq.mm Copper wire |
| 66 | Supply and external installation of following sizes of Heavy Duty, Hot Dip Galvanised MS ERW Conduits for Electrical & Communication System with all the required accessories like round JBs, Solid Long Bends, Check Nuts, Nipples, Couplings, Reducers, Copper Clips, Copper Conductor, GI Wire etc. as per the detailed specification. .(Refer Sec VI, Clause No.27). |
| 67 | 25mm dia 1.8mm wall thickness Heavy Duty, Hot Dip Galvanised/ ERW Conduits with 50mm deep junction boxes. |
| 68 | 32mm dia 1.8mm wall thickness Heavy Duty, Hot Dip Galvanised/ ERW Conduits with 50mm deep junction boxes. |
| 69 | Supply and installation of 80 X 50 mm size of U-PVC trunking including all the required accessories joints, flat angle,junctions, External & Internal angle, partition separation and end cap as per site requirements. Make: Legrand, Model: DLP (Refer Section V) |
| 70 | Supply & Installation of Power point with one way 20A modular switch (5734 10), 6/16 Amps combined shuttered type Socket (5734 71) and one way 6A modular switch (5734 00)& 5 pin, 6A shuttered type Socket (5734 70), 6 Modular frame & Plate (0109 61) suitable for fixing in legrand DLP truncking. Make : Legrand, Model : Arteor or equivalent. |
| 71 | Supply and Installation of following sizes of PVC trunking (casing & capping) on walls/Ceiling for routing of Power, Lighting and Telephone wires including all the required accessories like JBs, Coupling, External & Internal Bends, Elbows and end cap as per the detailed specification.(Refer Sec VI, Clause No.29) |
| 72 | 25 X 12 mm size of PVC Mini trunking |
| 73 | Loading, Transportation, Unloading at site, Laying, Testing and Commissioning of one number PVC/HRPVC/XLPE insulated and PVC sheathed Stranded Aluminium/copper conductor power cable of 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3) |
| 74 | 3/3.5/4 Core X above 25 to 3/3.5/4 Core X up to 120 sqmm |
| 75 | 3/3.5/4 Core X Above 240 sqmm to 3/3.5/4Core X 400 sqmm |
| 76 | Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3) |
| 77 | 3/3.5/4core X Upto 25 sqmm |
| 78 | 3/3.5/4Core X above 25 & up to 120 sqmm |
| 79 | 3/3.5/4Core X above 120 & up to 240 sqmm |
| 80 | 3/3.5/4Core X above 240 & up to 400 sqmm |
| 81 | End Termination of the following size Copper Conductor PVC/XLPE Insulated and FRLS sheathed armoured UG Cable using Single Compression, Heavy Duty, Siemens type Brass Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Copper crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland. (Refer Sec VI, Clause No.10.1). |
| 82 | 4C x 10 Sq.mm including cable gland earthing |
| 83 | 4C x 16 Sq.mm including cable gland earthing |
| 84 | End Termination of the following sizes of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland. (Refer Sec VI, Clause No.10.1). |
| 85 | 4 Core X 16 Sqmm |
| 86 | 3.5/4 C x 35 sq.mm |
| 87 | 3.5/4C x 50/70 sq.mm |
| 88 | 3.5 x 185 sq.mm |
| 89 | 3.5 x 400 sq.mm |
| 90 | Supply, installation, testing and commissioning of the following Raychem make Heat Shrinkable Cable Straight Through Jointing Kits (Crimping type) for 3.5 Core Aluminium Conductor, 1.1 kV (E), PVC/XLPE insulated cables of following sizes as specified. Excavation will be measured separately (Refer Sec VI, Clause No.10.6). |
| 91 | Straight Through Joint (Crimping type) for 3.5 Core x 400 Sq. mm |
| 92 | Straight Through Joint (Crimping type) for 3.5 Core, 25- 50 Sq. mm |
| 93 | Straight Through Joint (Crimping type) for 3.5 Core 120- 185 Sq. mm |
| 94 | Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. No cutting or drilling permitted after galvanisation. (Refer Sec VI, Clause No.12.9). |
| 95 | 50 X 6 mm GI flat |
| 96 | Supply, fabrication and installation of the following size of Copper Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. (Refer Sec VI, Clause No.12.7). |
| 97 | 25X3 mm Copper flat |
| 98 | Supply and installation of the following sizes of copper wires in built in trench as per the detailed specification.(Refer Sec VI, Clause No.12.8) |
| 99 | 8SWG copper wire |
| 100 | Supply and Installation of MS Brackets, Supports, Frame work, Clamps, Base Channels, etc. fabricated out of angle / Channel / Rods etc. The rate quoted shall include the cost of fabrication / welding, cleaning and painting/ galvanising as follows including supply of required, fasteners, nuts, washers, etc.(Refer Sec VI, Clause No.11). |
| 101 | MS fabrication 1 coat primer & 2 coats synthetic enamel paint |
| 102 | Rod Earthing |
| 103 | Supply installation and testing of Maintenance free earthing system (1x10feetx5/8inch copper bonded steel rod, 22 kg Ground Enhancing Material (GEM) ) as per IS: 3043 including RCC Chamber and RCC cover slab as per Drawing No.IGC/ESD/5060/1008/1 enclosed. (Refer Sec VI, Clause No.12.12). |
| 104 | Supply and Installation of Clean earth point. (Refer Sec VI, Clause No.12.11). |
| 105 | Supply and Installation of clean earth point with DMC insulator support and 200mm long 25X3mm Tinned copper flat as per the detailed specification. |
| 106 | Repair of Earth pit |
| 107 | Repair of earth pit chamber after removing and disposing old/damaged chambers supply and installing new chamber as per drawing No. IGC/ESD/5060/1008/1. (Refer Sec VI (mnc) clause no.2) |
| 108 | Supply and installation of Following Sizes of Unsheathed flexible cables in Walls, Floors, Built in Trenches including supply of GI spacer and clamps, fixing fasteners etc as per detailed specification.(Refer Sec VI, Clause No.12.5). |
| 109 | 1100V Unsheathed Flexible Copper Conductor PVC cable size 1 Core x 35.00 Sq.mm |
| 110 | End Termination of insulated Unsheathed flexible single core cables of the following sizes using copper crimping lugs. The rate shall include the cost of supply of copper crimping Lugs. (Refer Sec VI, Clause No.12.6). |
| 111 | 1100V grade 1C X 35 Sq.mm FRLS PVC unsheathed cable |
| 112 | Supply and installation of Following Sizes of Unsheathed flexible cables in direct in ground including excavation refilling the trench etc as per detailed specification.(Refer Sec VI, Clause No.12.5). |
| 113 | 1100V Unsheathed Flexible Copper Conductor PVC cable size 1 Core x 35.00 Sq.mm |
| 114 | Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats including excavation and refilling as per the detailed specification. No cutting or drilling permitted after galvanisation.Refer Sec VI, Clause No.12.9). |
| 115 | 25 x 6 mm GI flat |
| 116 | Excavation in hard soil including refilling with excavated earth and disposing surplus earth at places as directed with in a lead of 10 Mtrs. and initial lift upto 1.5 Mtrs. including neat banking as per detailed specification. (Refer Sec VI, Clause No.2) |
| 117 | Retrieval of the existing one number PVC/HRPVC/XLPE insulated and PVC sheathed power cable of 1.1 KV grade of following sizes laid direct in ground including Removal of end termination, excavation of trenches, retrieving of bricks and back filling as per the detailed specification.(Refer Sec VI, Clause No.5) |
| 118 | 3/3.5/4 Core Above 240sqmm & upto 400 sqmm |
| 119 | 3/3.5/4 Core Above 25sqmm & upto120 sqmm |
| 120 | Retrieval of the already laid one number 1100 Volts Grade XLPE/HRPVC insulated, Stranded Aluminium conductor cables of following sizes in built-in trenches, on walls, poles and from embedded pipes including removal of end termination GI spacer, clamps etc as per the detailed specification. (Refer Sec VI, Clause No.5) |
| 121 | 3/3.5/4 Core Above 240 & Upto 400 Sqmm |
| 122 | 3/3.5/4 Core Above 25 & Upto 120 Sqmm |
| 123 | Supply and Installation of following Wiring Accessories as per the detailed specification (Refer Sec VI (MNC), Clause No.5). |
| 124 | 1 No 10A Switch on modular plate and termination of wires to the switches |
| 125 | 1 No16A Switch on modular plate and termination of wires to the switches |
| 126 | 1 No 6A 3 Pin shuttered type Socket on modular plate and termination of wires to the switches |
| 127 | 1 No 6/16A 3 Pin combined shuttered type Socket on modular plate and termination of wires to the switches |
| 128 | Supply and Installation of following general electrical items as per the detailed specification (Refer Sec VI (MNC), Clause No.5). |
| 129 | water proof stickers of 250 x 50 mm size with messages as directed by Engineer in charge |
| 130 | Cleaning of Indoor Cable trenches (Refer Sec VI (MNC), Clause No.26). |
| 131 | Removal of various sizes of MS box / switch box from the wall / panel (Refer Sec VI (MNC), Clause No.19). |
| 132 | Removal of various sizes of surface mounted GI/ PVC Conduit from wall/column/beam and transportation to storage yard (Refer Sec VI (MNC), Clause No.19). |
| 133 | Clearing light jungle area, bulb weeds, grass including removal all unwanted plants, branches, twigs, wild growth etc.complete, and disposing the same 100 meters away manually or burning them without disturbing other areas etc., complete all as directed by the Engineer-in-Charge. Contractor must inform the Engineer-in-charge and prior permission shall be obtained from him for burning the wild growth. (Refer Sec VI (MNC), Clause No.7.3). |
| 134 | Maintenance of Earth Pits and measurement of Earth Pit Resistance as per the specification. (Refer Sec VI (MNC), Clause No.2). |
| 135 | Replacement of light fixtures (Refer Sec VI (MNC), Clause No.21). |
| 136 | Replacement of light fixtures for upto 4mtr/building tops etc including removal of existing fixtures |
| 137 | Removal of light fixtures (Refer Sec VI (MNC), Clause No.21). |
| 138 | Removal of light fixtures in labs and low bay areas |
| 139 | Temporary laying of LT cables of following sizes in open air / in Built in trench. (Refer Sec VI (MNC), Clause No.30). |
| 140 | Sizes up to 3.5C X 70 Sq.mm Aluminium conductor (Refer Sec VI (MNC), Clause No.30). |
| 141 | Removal of the following fuse DB's/SFU equipment already installed/embedded in wall, transporting the removed equipment to storage yard as directed by Engineer-in-charge. (Refer Sec V). |
| 142 | 63A/100A/125A, 500V, TP/TPN/SFU/ Combination SFU or 4/6/8/12 Way SPN fuse DB or 4/8 WAY TPN fuse DBs |
| 143 | Removal, transportation and unloading of 415V industrial type panel from PIF building to storage yard including removal of Power cables connected with the panel. (Refer Sec V Part A) |
| 144 | Removal of 1.5 or 2.5 or 4 sq.mm aluminium wire from concealed/ Exposed PVC / ERW / Flo-coated Metal conduits on roof or wall conduits as per the detailed scope of work.(Refer Sec V Part A) |
| 145 | Providing and fixing double Tubular scaffolding system using H-Frames / APS system or (cup lock type) on the exterior side upto seven story height made with 40mm dia M.S. tube 1.5m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in-charge. The elevation area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding . |
| 146 | Temporary installation of class IV panel as directed by Engineer-in-charge.(Refer Sec V Part A) |
| 147 | Temporary installation of DB as directed by Engineer-in-charge.(Refer Sec V Part A) |
| 148 | Supply and Fixing of First Aid Kit suiting for 25 persons as per the detailed specification.Model No. MEDIC 2500 IN, Make: Thadhani or equivalent.(Refer Sec V Part A ) |
| 149 | Supply and Fixing of Powder coated MS Danger / Warning Boards of different Voltage levels as per the detailed specification. Make: Thadhani or equivalent. ( (Refer Sec V Part A ). |
| 150 | Removal of existing False ceiling including disposing, cleaning and depositing the debris with in a distance of 50 metres etc. as directed by Engineer.-in-charge.(Refer Sec V Part A ). |
| 151 | Refixing of existing False ceiling including necessary fixtures such as bolt and nuts etc. for the completion of the work and as directed by the Engineer-in charge(Refer Sec V Part A ). |
| 152 | Removal of ferrulles in existing lighting/power wiring circuits and re fixing of new ferrules as per SLD.(Refer Sec V Part A ). |
| 153 | Survey of existing electrical loads and preparation of Single Line Diagrams (SLD) for the electrical distribution system(DB level)(Refer Sec V Part A ). |
| 154 | Measurement of soil resistivity upto 10m equal intervals at North Plant site as directed by EIC and design of earthing grid as per relevant standards(Refer Sec V Part A ). |
| 155 | Measurement of soil resistivity above 10m and upto 150m equal intervals at North Plant site as directed by EIC and design of earthing grid as per relevant standards(Refer Sec V Part A ). |
| 156 | Supply and Fixing of Wooden cupboard of size 600mmX600mm with sliding glass for keeping Asbuilt drawings and panel SLDs at different locations(Refer Sec V Part A ). |
| 157 | Painting of Distribution Equipment\ |
| 158 | Cubicle switch boards having number of vertical sections upto 3 (Refer Sec VI (MNC), Clause No.3). |
| 159 | Shifting of Electrical equipment/cable drums of various sizes including loading and unloading/Shifting of electrical/telephone items from IGCAR and hand over to service centres (upto chennai limit) or vice versa.(Refer Sec VI (MNC), Clause No.31). |
| 160 | Equipment/cable drums weighing upto 100 kgs for a distance more than 500 mtrs and upto a distance of 5 kms. |
| 161 | Removal of termination of armoured cables of following sizes from electrical equipment or reconnecting of removed termination |
| 162 | Sizes above 3.5/4C X 120 Sq.mm and up to 3.5/4C X 185 Sq.mm |
| 163 | Sizes above 3.5/4C X 240 Sq.mm and up to 3.5/4C X 400 Sq.mm |
| 164 | Sizes above 4C X 25 sq.mm and upto 4C X 70 sq.mm |
| 165 | Supply, transportation, installation, testing and Commissioning of the following type of Surface mounted luminaires.(Refer Sec VI, Clause No.16.1). Catalogue No : WAND K 30W 5700K code SLWKY03057NDWEP04C22 -SURFACE LIGHTS NONDIM WITH CUSTOMIZED CLAMP OF 30 DEG. TILT WHITE (PC) 4FEET- PRIME or equivalent |
| 166 | Supply, transportation, installation, testing and Commissioning of the following type of Surface mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : WAND K 9W 5700K Code- SLWKB00957NDWEP0002C01-2Feet Batten PRIME or equivalent and Lamp Type LED |
| 167 | Supply, transportation, installation, testing and Commissioning of the following type of Surface mounted luminaires.(Refer Sec VI, Clause No.16.1). - Catalogue No : SM261C LED20S 4000 PSU WH or equivalent and Lamp Type LED |
| 168 | Supply, transportation, installation, testing and Commissioning of the following type of Recess mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No :FULLLIT SQ STD PANEL LIGHTS RECESS 30W 5700K CCT NON DIM WHITE (PC) PRIME LEDPRF0003057NDWEP or equivalent and Lamp Type LED |
| 169 | Supply, transportation, installation, testing and Commissioning of the following type of Recess mounted luminaires. (Refer Sec VI, Clause No.16.1). Catalogue No : Moon V2 STD 15W 5700K Item code DRM0S01557NDWEP or Equivalent |
| 170 | Supply, transportation, installation, testing and Commissioning of the following types of Suspended luminaires. (Refer Sec VI, Clause No.16.1). Catalogue No : CANE STD LINEAR PENDANT 40W, 5700K-4FT Item code LPC0104057NDWEP0DL4C01 with downrod replacement fixing accessories or Equivalent |
| 171 | Supply, Installation, Testing and Commissioning of following Flood light luminaries on RCC/Metalic poles of height from 7 M to 12 M as per per the detailed specification. (Refer Sec VI, Clause No.16.1). Catalogue No : BVP120 LED 47 CW NB FG A1 PSU GR or equivalent |
| 172 | Retrieval of the already laid one number PVC/HRPVC/XLPE insulated and PVC sheathed power cable of 1.1 KV grade of following sizes laid direct in ground including removal of end termination, excavation of trenches, retrieving of bricks, back filling and Re - laying the same cable direct in ground by using retrieved bricks including transportation of cables, excavation and backfilling of soil, supply of sand & shortage bricks etc as per the detailed specification. (Refer Sec VI, Clause No.7) |
| 173 | 3/3.5/4 Core Above 240sqmm & upto 400 sqmm Please Enable Macros to View BoQ information |
