|
| 1 | Supplying and erecting 20mm dia. corrugatedflexible polypropylene conduit |
| 2 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG- MA/CON. |
| 3 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG- MA/CON. |
| 4 | Supplying and erecting mains with 2x1.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 5 | Supplying and erecting mains with 1x1.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 6 | Supplying and erecting mains with 1x2.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 7 | Supplying and erecting mains with 2x2.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 8 | Supplying and erecting mains with 2x4 sq.mmFRLS copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 9 | Supplying and erecting mains with 1x4 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 10 | Supplying and erecting mains with 4x6 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 11 | Supplying and erecting PVC insulated PVC roundsheathed 1.5 sq.mm (30 no. x0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV |
| 12 | Supplying and erecting Ceiling rose / Battenholder / Slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box. |
| 13 | Supplying and erecting modular type switch 6A /10A duly erected on provided plate and box with wiring connections complete. |
| 14 | Supplying and erecting modular type bell-pushwith indicator 2 modules 6A / 10A, duly erected on provided plate and box with wiring connections complete. |
| 15 | Supplying and erecting modular type switch 16 /20 A with indicator, duly erected on provided plate and box with wiring connections complete. |
| 16 | Supplying and erecting modular type 3 pin 6Amulti socket with safety shutter, duly erected on provided plate and box with wiring connections |
| 17 | Supplying and erecting modular type 3 pin 6 / 16Amulti socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 18 | Supplying and erecting modular typeindicator lamp, duly erected on provided plate and box with wiring connections complete. |
| 19 | Supplying and erecting modular type 6 /16A fuse unit, duly erected on provided plate and box with wiring connections complete. |
| 20 | Supplying and erecting modular type (two module)electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. |
| 21 | Supplying and erecting modular typeblanking plate one module, duly erected on provided plate & box. |
| 22 | Supplying and erecting PVC Surface modularswitch box with double mounting plate for 2 module duly erected. |
| 23 | Supplying and erecting PVC Surface modularmounting plate for 6 module duly erected |
| 24 | Supplying and erecting PVC Surface modularswitch box with double mounting & front plate for 8 module complete duly connected. |
| 25 | Point wiring for light/bell/exhaust fan in PVCtrunking (casing-capping) with1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 26 | Point wiring for ceiling fan in PVC trunking(casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 27 | Wiring for plug on board with Switch socketsurface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG- PW/CW |
| 28 | Supplying and erecting LED Panel Light(600mmX 600mm) Max. 30 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f.>0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 29 | Supplying and erecting LED Panel Light(600mmX 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f.>0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 30 | Supplying and erecting bulk head LEDfitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f.>0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty. |
| 31 | Supplying and erecting anodized aluminiumcorridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200- 270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty. |
| 32 | Supplying & erecting inverter LED batten 10Wtube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8- 10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty. |
| 33 | Supplying & erecting inverter LED batten 20Wtube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8- 10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty. |
| 34 | Supplying and erecting bakelite call bellwith 6 cm / buzzer with double coil suitable for 230V complete erected on PVC block. |
| 35 | Supplying and erecting ding dong /electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size. |
| 36 | Supplying and erecting luminous / modulartype call bell indicator with plastic body, heavy duty coil and indicator lamp working on 230VA.C. supply with resetting arrangement complete erected on double wooden/ sunmica board. |
| 37 | Supplying and erecting integrated LED street lightfitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 38 | Supplying and erecting street light Wall bracketmade from 40 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG- BKT/WB |
| 39 | Supplying & erecting 0.5W, 230V integraltype LED Lamp suitable for B-22/E- 27 base. |
| 40 | Supplying & erecting 10-12W, 230Vintegral type LED Lamp suitable for B-22 / E-27 base. |
| 41 | Supplying and erecting fresh air cumexhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete. |
| 42 | Supplying and erecting energy saving ceiling fan230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF |
| 43 | Supplying and erecting fan hook of 10 mm.M.S. round bar grouted in RCC slab with making the site as original. |
| 44 | Supplying and erecting storage type waterheater 50 litres capacity having standing loss<0.675 kWh/24hour/45°C, high impact resistance engineering plastic body with anti corrosive high grade steel inner tank heating element having hard water & corrosion protection, with minimum 3 safety protections (i.e. thermostat & thermal cut- out, function valve) with total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete. specification no.AP-WH/STWH |
| 45 | Supplying and erecting chromium platedheavy duty brass stop cock for inlet pipe of water heater (15mm. dia). |
| 46 | Providing fiber reinforced PVC flexiblepipe upto 1m length with brass locking nuts and washers and clips at both ends suitable for hot water and cold water both (1 set of 2 nos.) complete. |
| 47 | Supplying, installing, testing and commissioning ofsingle phase, 230V, 50 Hz, 800 to 900VA digital pure sine wave inverter with backup time of hrs. based on Insulated Gate Bipolar Transistor (IGBT) technology complete as perspecification no. AP-INV |
| 48 | Supplying and erecting 12V/200Ah tubular batterywith battery terminal wire, duly charged with 36 months warranty complete |
| 49 | Supplying, erecting & marking SPMCB 6A to 32A,C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 50 | Supplying, erecting & marking SPMCB 6A to 32A,B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 51 | Supplying, erecting & marking DPMCB 6 A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 52 | Supplying, erecting & marking TPMCB 40A to63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 53 | Supplying, erecting & marking FPMCB 40A to63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 54 | Supplying, erecting and marking double poleisolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board. |
| 55 | Supplying & erecting triple pole and neutraldistribution board (TPNDB), SPMCB of 12 ways/phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB |
| 56 | Supplying and erecting single pole andneutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB |
| 57 | Supplying and erecting single pole andneutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB |
| 58 | Supplying & erecting CRCA sheet metal one wayenclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBOcomplete erected on angle iron/GI frame |
| 59 | Supplying & erecting porcelain/epoxy busbar support complete erected in provided M.S. box for 100A |
| 60 | Supplying and erecting bus bar chambertriple pole with neutral with fouraluminium bars, 500V, 100A having 15mm (Width) X 3 mm (Thickness), with99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CP- BB |
| 61 | Supplying and erecting plywood 12 mmthick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete. |
| 62 | Supplying and erecting iron work, sheet metalwork consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 63 | Supplying and erecting iron work, sheet metalwork consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 64 | Supplying, erecting & terminating FR XLPEinsulated, galvanised steel formed wire armoured (strip) cable 1100 V 2 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 65 | Supplying, erecting & terminating FRXLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB- LT/AL |
| 66 | Supplying, erecting & terminating FRXLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB- LT/AL |
| 67 | Supplying & erecting G.I. pipe ‘A’ class 50 mm dia.erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE |
| 68 | Supplying and laying (including excavation ofsuitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 69 | Supplying and laying (including excavation ofsuitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete |
| 70 | Providing & erecting hot dipped galvanised laddertype cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware. |
| 71 | Providing & erecting hot dipped galvanised coversuitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware. |
| 72 | Providing & erecting 6 m high (clear height)galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 73 | Providng earthing with galvanized iron earthplate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP |
| 74 | Providing pipe type earthing with 40mm. dia.G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP |
| 75 | Supplying and erecting minimum Three &above star rated submersible pump set suitable for erection on open well of 2.25 KW/3 HP with 415 V 50 c/s. A.C. supply, having delivery head from 27 to 9 m and discharge from 300 to 660 litres. per minute & pipe of Suction 65mm /Delivery 50 mm diameter erected with necessary H type clamps as per specification No. WP-OSP |
| 76 | Supplying & erecting flat flexible 3 core 2.5sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete |
| 77 | Supplying & erecting automatic controlpanel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc . |
| 78 | Making trench in Hard murum/Tar road having0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level 1.1Kv cable complete as per specification No. CW- EXN-CTR |
| 79 | Supplying and erecting ISI mark GI pipe 40mm. dia. ‘B’ class at position with accessories complete as per specification no. CW-PLB/GP. |
| 80 | Supplying and erecting ISI mark GI pipe 50mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP |
| 81 | Supplying and erecting non return valve 50 mm diain position made of gun metal complete. |
| 82 | Supplying and erecting CI flange 50 mm.dia with necessary nuts bolts and washers with rubber seal in position complete. |
| 83 | Making cement concrete foundation in 1:3:6cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). Please Enable Macros to View BoQ information |
