Tender For Construction Of Media Centre, Guest House And Commnity Hall In Tanakpur Under Chief Minister Announcement No. 351/2022 And 39/2023., Champawat-Uttarakhand

TDR : 55152676

Tender Notice
BOQ

9 Days Left

Champawat , Uttarakhand

Tender Brief : Tender For Construction Of Media Centre, Guest House And Commnity Hall In Tanakpur Under Chief Minister Announcement No. 351/2022 And 39/2023.

Document Fees
₹ 5900 /-

EMD
₹ 2040000.0 /-

Tender Value
Refer document

Submission Date
11-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
2	All kinds of soil
3	Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
4	All kinds of soil
5	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
6	Supplying chemical emulsion in sealed containers including delivery as specified.
7	Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
8	Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL antitermite treatment (excluding the cost of chemical emulsion) :
9	Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
10	Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :
11	With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration.
12	Disposal of earth up to 2 km from site as directed by Engineer in charge.
13	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering All work upto plinth level :
14	1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
15	1:2:4 (1 cement : 2 coarse sand (zone-lll) derived fromnatural sources : 4 graded stone aggregate 20 mm nominalsize derived from natural sources)
16	Providing and laying dampproof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
17	Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50kg of cement.
18	Centring and shuttering including strutting, propping etc. and removal of form for :
19	Foundations, footings, bases of columns, etc. for mass concrete.
20	Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
21	Suspended floors, roofs, landings, balconies and access platform.
22	Lintels, beams, plinth beams, girders, bressumers and cantilevers.
23	Columns, Pillars, Piers, Abutments, Posts and Struts.
24	Stairs Except Spiral Staircases
25	Weather shade, Chajjas, corbels etc., including edges.
26	Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
27	ThermoMechanically Treated bars of grade Fe-500D or more
28	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana I Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
29	All work upto plinth level - Concrete of M30 grade with minimum cement content of 350 kg /cum
30	All work above plinth level upto floor V level - Concrete of M30 grade with minimum cement content of 350 kg /cum
31	Brickwork with common burnt clay FPS (non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in
32	Cement mortar 1:6 (1 cement : 6 coarse sand)
33	Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.
34	Area of slab over 0.50 sum.
35	Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Architect.
36	Granite work.
37	Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.
38	Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
39	Granite Stone of approved shade.
40	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
41	Fixed to openings /wooden frames with rawl plugs screws etc.
42	Providing and fixing M.S. Main gate as per design with M.S. flats, square or round bars etc. grills of designed pattern in frames of Main Gate, including hinges, locks, roller wheels, runner channel/rails also including priming coat with approved steel primer and painted/powder coated in approved colour,complete in all aspect.
43	Providing and fixing M.S. Main gate as per design with M.S. flats, square or round bars etc. grills of designed pattern in frames of Main Gate, including hinges, locks, roller wheels, runner channel/rails also including priming coat with approved steel primer and painted/powder coated in approved colour,complete in all aspect.
44	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
45	Steel work in built up tubular (round, square or rectangular hollow tubes etc. of grade 310) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
46	Hot finished seamless type tubes
47	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
48	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.
49	40mm thick with 20mm nominal size stone aggregate.
50	Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements, etc
51	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Architect in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sum including pointing in white cement mixed with pigment of matching shade complete.
52	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
53	Size of Tile 1000x1000 mm
54	Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).
55	Size of Tile 1000x1000 mm
56	Providing and laying polished granite stone flooring in required design and patterns, in linear as well as curviliner portion of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement :4 course sand) laid and joined with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge
57	Polished granite stone slab of all colour and texture except black, cherry/ruby red
58	Extra for pre finished nosing to treads of steps of marble stone.
59	Extra for granite stone flooring in treads of steps and risers using single length up to 2.00 metre .
60	Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of mortar 1:4(1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:
61	Markrana white second quality
62	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)
63	25 mm thick
64	40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with an admixture of pigment to match the shade of stone.
65	white sand stone
66	25 mm wooden planking, tounge and grooved in flooring, including fixing with iron screws complete with:
67	Second class deodar wood
68	Providing and laying granite Cobble Stone of sizees 100-150x100-150x50-75 mm over 40 mm base of cement mortar (1:6), joints no more than 15mm wide filled with liquid grout composed of 3 part sand(2 part sharp sand, 1 part stone dust) and 1 part cement with added admisture of pigment ot match the color of stone.
69	Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
70	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,with 25mm long dry wall screws @ 230 mm interval, including including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
71	with 25mm long dry wall screws @ 230 mm interval, including including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
72	POP false ceiling as per specifications and instructions of engineer in charge
73	Providing and fixing translucent multiwall poly carbonate roofing sheet of 6-8mm thickness on structural frame work using required adhesive/ anti- corrosive fixures, bolts etc. such that there is no leakage of rain water, inclusive of all required material complete in all aspects as per drawings issued and instructions of engineer in charge
74	ACP Cladding Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF I Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
75	(c) The fastening brackets of Aluminium alloy 6005 T5 I MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perfonn as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the perfonnance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
76	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
77	Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5: 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge.The product performance shall carry guarantee for 10 years against any leakage.
78	For vertical surface two coats @ 0.70 kg per sqm per coat
79	F I N I S H I N G
80	12 mm cement plaster of mix :1:6 (1 cement : 6 fine sand)
81	15 mm cement plaster on rough side of single or half brick wall of mix :1:6 (1 cement : 6 fine sand)
82	6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)
83	Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
84	Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats
85	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
86	Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.(delux multi surface paint)
87	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work.
88	Providing and fixing dry cladding upto 10 metre height with 30 mm thick gang saw cut stone with machine cut edges of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/or with the help of cramps,pins,etc. and sealing the joints with approved water sealant as per Architectural drawing and directionof Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately).White sand stone – 30 mm thick gang saw cut stone.
89	ALUMINIUM WORK STRUCTURAL GLAZINGDesigning, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminiumalloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.
90	(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e) Making provision for drainage of moisture/ water that enters thecurtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified.The item includes the cost of getting all the structural and functionaldesign including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as peritem description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.Note:- 1. The cost of providing extruded aluminium frames, shadowboxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places.
91	Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately.The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 170251. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr 2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml.3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml 4. Structural Performance Deflection and deformation by static airpressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testingmethod for Qualitative test, Tests to be conducted on site.6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml
92	DOOR-WINDOW
93	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood
94	Brass 100 mm mortice latch and lock with 6 levers without pair of handles
95	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm
96	Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
97	Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete
98	12 mm thick toughened glass door shutter
99	Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to 1S: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacture for :1. Sites with basic wind speed > 45 m/sec as per IS 875 — Part 32. Sites with structure height more than 20m for all wind speeds Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for rollertrack, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above)with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m).
100	Three track three panels sliding door with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on two panels along with multi-point locking system, adjustable nylon rollers with SS 304 body. Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screensash (30 mm & above) x (74 mm & above).(Height upto 2.5 metre).
101	Fixed window / ventilator with mullion / transom. Using R4 series with frame (64 mm & above ) x (50 mm & above) & mullion (64 mm & above) x (70 mm & above). (Height above 2.5 metre)
102	Casement window single panel with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles. Using R4 series with frame (64 mm & above) x (60 mm & above) & sash (64 mm & above) x(70 mm & above). (Height above 1.8 metre)
103	Providing and installing as per requirement following fittings in the installation of door and window as per specifications of DSR 2023, complete in all manner as per instruction of engineer incharge Pair of Anodised Aluminium lever handles for 100 mm mortice latch and lock
104	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with Si, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
105	Factory made 35 mm thick shutters with laminated veneer lumber sgm styles & rails as per TADS 15:1995 and panels of 12 mm thick one side prelaminated type-I, and other side balancing lamination, medium density flat pressed three layer, graded particle board (FPT-1) as per 1S:3087 bonded with BWP type synthetic resin adhesive, as per 1S:848
106	Sanitary,Water Supply & Sewage Work
107	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc.
108	15 mm dia. nominal bore
109	20 mm dia. nominal bore
110	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supplyincluding all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
111	20 mm dia. nominal bore
112	25 mm dia. nominal bore
113	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. Flexible pipe 32mm dia
114	Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore
115	Providing and fixing ball valve (brass) of approved quality complete High or low pressure with plastic floats 20 mm nominal bore
116	Providing and fixing brass stop cock of approved quality 20 mm nominal bore
117	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
118	25 mm nominal bore
119	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
120	Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mmwith 1/2\\" BSP thread and shapes, weighing not less than 60 gms.
121	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shades with 6 mm thick hard board backing: of Rectangular shape 453x357 mm
122	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
123	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
124	75 mm dia
125	110 mm dia
126	Providing and fixing PTMT grating of approved quality and colour. Circular type.
127	100 mm nominal dia.
128	125 mm nominal dia with 25 mm waste hole
129	Providing and fixing PVC Coupler (75 mm dia)
130	Providing and fixing PVC Coupler (110 mm dia)
131	Providing and fixing PVC Shoe (Plain) (75 mm dia)
132	Providing and fixing PVC Shoe (Plain) (110 mm dia)
133	Providing and fixing PVC plain bend of required degree. ( 75 mm dia)
134	Providing and fixing PVC plain bend of required degree. ( 110 mm dia)
135	Providing and fixing PVC Single tee with door required degree access door 75x75x75x110mm
136	Providing and fixing PVC Single tee with door required degree access door 110x110x100x110mm
137	Providing and fixing on wall face unplasticised Rigid PVC pipes (75 mm dia)
138	Providing and fixing on wall face unplasticised Rigid PVC pipes (110mm dia)
139	Providing and fixing on wall face unplasticised Rigid PVCpipes (110mm dia) For External Work
140	Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 20mm nominal bore. Weighing not less than 40gms.
141	Providing and fixing C.P. brass bib cock of approved quality conforming to 18:8931 : -15mm nominal bore
142	Providing and fixing C.P. brass long nose bib cock of approved quality conforming to \|S standards and weighing not less than 810gms. -15 mm nominal bore
143	Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a)15 mm nominal dia
144	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to 1S:8931 -15mm nominal bore
145	Providing and fixing white European wall hung water closet PP soft close seat cover, Hinges, Fixing Accessories and Accessories set, including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent)
146	Providing and fixing wash basin with C.l. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
147	Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : -100 mm diameter
148	Provinding & Fixing White Vitreous China Urinal including all materials T & P etc. Complete.Urinal (Make Jaguar or equivalent)
149	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. -600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
150	Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
151	Providing and fixing toilet paper holder : -C.P. brass
152	Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms.
153	Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
154	Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
155	Providing and fixing Central Hole Basin Mixture with popul waste System with 450 mm long Braided Hoses including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent)
156	Providing and fixing Sink Mixer with Swinging Spout (Wall Mounted Model) With Connecting Legs & Wall Flanges with including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent)
157	Providing and fixing C.P. brass shower Arm with size 20 mm & 450 mm long round Shape single flow with self cleaning function approved as per E/I (Make Jaguar or equivalent)
158	PLUMBING ITEMS PROVIDED
159	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc.15 mm dia. nominal bore
160	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc.20 mm dia. nominal bore
161	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supplyincluding all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work25 mm dia. nominal bore
162	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. Flexible pipe 32mm dia
163	Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore
164	Providing and fixing ball valve (brass) of approved quality complete High or low pressure with plastic floats 20 mm nominal bore
165	Providing and fixing brass stop cock of approved quality 20 mm nominal bore
166	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore
167	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
168	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shades with 6 mm thick hard board backing: of Rectangular shape 453x357 mm
169	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
170	75 mm dia
171	110 mm dia
172	Providing and fixing PTMT grating of approved quality and colour. Circular type.
173	100 mm nominal dia.
174	125 mm nominal dia with 25 mm waste hole
175	Providing and fixing PVC Coupler (75 mm dia)
176	Providing and fixing PVC Coupler (110 mm dia)
177	Providing and fixing PVC Shoe (Plain) (75 mm dia)
178	Providing and fixing PVC Shoe (Plain) (110 mm dia)
179	Providing and fixing PVC plain bend of required degree. ( 75 mm dia)
180	Providing and fixing PVC plain bend of required degree. ( 110 mm dia)
181	Providing and fixing PVC Single tee with door required degree access door 75x75x75x110mm
182	Providing and fixing PVC Single tee with door required degree access door 110x110x100x110mm
183	Providing and fixing on wall face unplasticised Rigid PVC pipes (75 mm dia)
184	Providing and fixing on wall face unplasticised Rigid PVC pipes (110mm dia)
185	Providing and fixing on wall face unplasticised Rigid PVCpipes (110mm dia) For External Work
186	Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 20mm nominal bore. Weighing not less than 40gms.
187	Provinding & Fixing Bib Cock with wall flange including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent)
188	Provinding & Fixing long nose bib cock with wall flange including all materials T & P etc. Complete. approved as per E/I (Make Jaguar or equivalent)
189	Provinding & Fixing Anguler Cock with wall flange including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent)
190	Providing and fixing white European wall hung water closet PP soft close seat cover, Hinges, Fixing Accessories and Accessories set, including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent)
191	Provinding & Fixing White Vitreous China Under Counter basin with including all materials T & P etc. Complete Counter top basin including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent)
192	Providing and fixing C.P. brass shower rose with size 120 mm dia including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent)
193	Providing and fixing 600mm long towel rail without hanger total length of 600mm, including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent)
194	Providing and fixing towel ring round with Round Flangincluding all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent)
195	Providing and fixing toilet paper holder including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent)
196	Providing and fixing Soap dish including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent)
197	Providing and fixing Glass Self including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent)
198	Provinding & Fixing Piller cock including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent)
199	Providing and fixing C.P. brass shower Arm with size 20 mm & 450 mm long round Shape single flow with self cleaning function approved as per E/I (Make Jaguar or equivalent) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttarakhand Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Media Centre, Guest House And Commnity Hall In Tanakpur Under Chief Minister Announcement No. 351/2022 And 39/2023., Champawat-Uttarakhand

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Media Centre, Guest House And Commnity Hall In Tanakpur Under Chief Minister Announcement No. 351/2022 And 39/2023., Champawat-Uttarakhand

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us