|
| 1 | Foundation excavation in hard soil including levelling and dressing the bed and side depositing muck within initial lead & lift etc complete. |
| 2 | Filling foundation and plinth with sand and well watered and rammed including cost, conveyance and royalty etc complete as per direction of Engg.-in-Charge. |
| 3 | Cement concrete (1:3:6)with 40mm size CBHG metal including cost, conveyance and royalty etc. complete as per direction of Engg.-in-Charge. |
| 4 | Fly Ash Brick masonry in c.m. 1:6 in F & P including cost,conveyance and royalty of materials curing etc. complete. as per the direction of the Engineer-in-charge. |
| 5 | Fly Ash Brick Masonry work in superstructure with cement mortar (1:6) including scaffoldings ,racking out joints, curing etc complete as per specification/drawing and as per the direction of the Engineer-in-charge. |
| 6 | Providing and Laying reinforcement Cement concrete (M-20) with 20 mm and down graded chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement ) as per direction of Engineer-in-charge. A). Column base |
| 7 | Plinth band |
| 8 | Column |
| 9 | Lintel |
| 10 | Chajja |
| 11 | Roof slab |
| 12 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete in proper position including cost of binding wire 18 to 20 gauge as per direction of Engg.-in-Charge. |
| 13 | 20mm Cement Plaster ( 1:4) for grading plaster Incl.all charges On new work complete as per direction of Engg.-in-Charge. |
| 14 | 6mm.thick cement plaster with C.M(1:4) to RCC surface including closed deep chipping and slury treatment etc. complete as per direction of Engg.-in-Charge. |
| 15 | 16mm thick cement plaster in cement mortar (1:6) including necessary scaffolding curing etc. as per direction of Engg.-in-Charge. |
| 16 | 12mm cement plaster in cement mortar (1:6)including necessary scaffolding curing etc. as per direction of Engg.-in-Charge. |
| 17 | Supplying, fitting and fixing vitrified tile (Printed) in floors of size 600mm x 600mm of approved make conformaing to IS : 13755 laid on 20 mm thick cement mortar (1:4) (1 cement :4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete |
| 18 | Supplying, fitting & fixing of Vitrified colour / printed series tiles in dadoes, skirting and risers of steps of size 600mmx 600mm of approved make confirming to IS:13755 laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 19 | Supplying,fitting and fixing in position MS grills made up of 6mm thick MS flat,MS angle in periphery with ornamental design if necessary including cost of all materials,labour,T& P required for the work finished in all respect as per the direction of the Engineer-in-Charge. |
| 20 | Supplying and fixing of G.I pressed G.I door assemled with polymer powder coated including the cost of all materials and fittings etc comp. |
| 21 | Labour for fitting and fixing doors and windows etc all comp. |
| 22 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes,labour T & P etc. complete. |
| 23 | Two Coats of Enamel Paint Over iron Surface including Cost of all charges etc Complete |
| 24 | Priming 1 Coat with any approved primer in wall surface as per direction of Engg.-in-Charge. |
| 25 | 2 Coat of Distemper Over Primer Area in wall surface as per direction of Engg.-in-Charge. |
| 26 | 2 Coat of Weather Coat Over Primer Area in wall surface as per direction of Engg.-in-Charge. |
| 27 | Supplying, fitting, and fixing up window(sliding type) made up Aluminium section 9778 as windows frame,section No.4095,4096 and 9777,3994 as shutter frame with 5mm.thick black glass as panel fitted with rubber beading including locking arrangement includ |
| 28 | Supplying and fixing RCC chowkhat for fixing of doors |
| 29 | Black board Please Enable Macros to View BoQ information |
