|
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of brick work,PCC Block or stone/boulder masonary built in cement mortar/lime mortar including all quoins, arches, pillars etc complete all as spd and directed |
| 3 | M & L precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 including complete all as spd and directed |
| 4 | M&L for brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed |
| 5 | dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. |
| 6 | M & L for 75mm thick PCC 1:2:4, type B-2 using 40mm graded stone aggregate, as in pavings/hard standing/path etc finished uneven and rough without using extra cement and including demolition complete all as specified & directed. |
| 7 | S & F Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments including 15mm screed bed in CM 1:6 and incl demolition PCC./tile complete all as specefied |
| 8 | M& L for providing precast cement concrete rubber moulded coloured interlocking tiles/cobble stone 60 mm thick with grey cement and pigment of approved design and pattern complete all as specified and directed |
| 9 | M&L for refixing of interlocking paver blocks incl dismantling complete all as specified and directed. |
| 10 | M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and direceted. |
| 11 | M & L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:6, surfaces finished even and fair etc and then after preperation of newly plastered surface applying two coat of oil bound distemper over a layer of wall care putty of average thickness 1 mm complete all as specified & directed. |
| 12 | M & L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:4, surfaces finished even and fair etc and then after preperation of newly plastered surface applying two coat of cement based paint complete all as specified & directed. |
| 13 | M & L for rendering 5mm thick in cm 1:4 as in ceiling finished even & fair including Taking down cement plaster of any description raking out of joints, hacking for key, scrubbing down with water etc and then after preperation of surface apply three coat of white wash on ceilling . complete all as specified & directed. |
| 14 | Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed. |
| 15 | M & L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:4, surfaces finished even and fair complete all as specified & directed. |
| 16 | M&L three coat of white wash on walls including preparation of new plastered surface and complete all as specified. |
| 17 | M&L for applying one coat of oil bond distemper on old distempered surfaceses of walls of old treated surfaces all as specified including preparation of old surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots and efflorescence salts ,removing nails and making good complete all as specified. |
| 18 | M & L for preparation (making surface good with putty wherever require) of old decorated surfaces of walls and applying one coat of exterior weather proof acrylic emulsion paint complete all as specified. |
| 19 | S & F in repairs 600 x 450 mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers (In repairs) complete all as specified & directed. |
| 20 | S & F in repair PVC cabinet mirror size 350mm x 450 mm fixed with steel screws with rowel plug complete all as specified and directed |
| 21 | S & F rotational moulded polyethylene three layered water storage tanks 500 Litres capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including taking down existing water tank complete all as specified & directed. |
| 22 | S & F rotational moulded polyethylene three layered water storage tanks 1000 Litres capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including taking down existing water tank complete all as specified & directed. |
| 23 | S & F (in repair) 15 mm bore fancy type bib taps (long body) brass chromium plated screwed down, screwed for iron pipe or for brass ferrule including flench complete all as specified & directed. |
| 24 | S & F (in repair) 15mm bore pillar taps, brass chromium plated, screwed down high pressure with or without lettered, hot or cold with long screwed shanks and fly nuts, screwed to iron pipe complete all as specified & directed. |
| 25 | S & F (in repair) 15 mm dia chromium plated angle cocks/stop valves, brass, screwed down, high pressure with crutch or butterfly handle, flench screwed both ends for iron pipe or for union complete all as specified & directed. |
| 26 | S & F in repairs 20 mm bore PTMT ball valves, high pressure with polyethylene float and fly nuts complete, screwed for iron pipe or for brass ferrule complete all as specified & directed. |
| 27 | S & F in repairs 32mm dia bottle trap of PTMT having minimum water seal of 25mm (Minimum weight 32mm-260gms) |
| 28 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. (Cat No. F5001114 or equivalent) |
| 29 | S & F (in repairs) vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed. |
| 30 | S & F (in repair) vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover and flushing pipe complete all as specified & directed. |
| 31 | S & F (in repairs) PVC low level flushing cistern 10 Litre capacity, symphonic action type, white as approved including ball valve, float valve and handle, flush pipe complete all as specified & directed. |
| 32 | S&F in repairs Oval type Wash Hand Basin (Counter Top) superior quality 550 x 400 mm size fitted over granite slab incl waste pipe coupling 150mm long complete all as specified and directed. |
| 33 | S & F in repairs 600mm long PVC connection, 15 mm bore complete all as specified & directed. |
| 34 | S & F in repair Brass CP towel rail 600 mm long as a approved quality complete all as specified & directed |
| 35 | S & F in repairs 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified & directed |
| 36 | S & F in repair plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device |
| 37 | S&F in repairs for Brass chromium plated waste couplings of dia 32 mm for WHB fixed complete all specified and directed |
| 38 | S&F in repairs 40 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed |
| 39 | S&F in repairs stainless steel peg set of Six complete all as specified and as directed. |
| 40 | Cutting Chases for concealed water tubing,shelves,chajjas,sunshades etc and making good disturbed surfaces, cutting not exceeding 10 cm girth, on brick walls complete all as specified & directed. |
| 41 | Supply & Fix 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to concealed in walls and ceiling or laid in floor incl taking down complete all as specified and directed. |
| 42 | Supply & Fix 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to concealed in walls and ceiling or laid in floor and incl taking down complete all as specified and directed. |
| 43 | S & F in repair Kitchen plate rack of stainless steel of size 720mm x 600mm x 230 mm made out of 1 mm thick steel sheet complete all as specified & directed. |
| 44 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as spd and directed |
| 45 | M & L for water proofing treatment to sunken slab with APP based madified polymeric membrane as per manufacturers instructions with following course of description below:- (a) Complete removal of existing membrane and cleaning the slab by wire brush to remove all the dust, laitance etc. (b) Applying Cement plaster 1:4, 10 mm thick, mixed with water proofing compound.(c) Applying a priming coat of bituminous primer @ 0.30 kg / sqm, till the surface is properly impregnated.(d) Providing APP based 5 layer polymeric membrane minimum weighing 3.6 kg / sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms /sqm) centre core, laid on primed surface Fixed with hot molten bitumen of grade 85/25 @ 1.2 Kg / Sqm by forced applications as per manufacturers instructions with side over lap of 100 mm and end overlap of 150 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer. |
| 46 | S & F (in repairs) PVC floor trap 75 mm bore including jointing to waste pipe in cement mortar complete all as specified & directed. |
| 47 | S & F (in repairs) 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls/floors with necessary fittings complete all as specified & directed. |
| 48 | S & F in repairs PVC (SWR) bends 110 mm bore complete all as specified & directed. |
| 49 | S & F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floors etc complete all as specified & directed. |
| 50 | S & F in repairs 75 mm bore PVC (SWR) bends complete all as specified & directed. |
| 51 | S & F in repairs 40 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floors etc complete all as specified & directed. |
| 52 | M&L for , false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick E boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceiling and taking down and refixing of electric fitting care fully complete all as specified and as directed. |
| 53 | M&L for of 4 mm thick E boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceiling and taking down and refixing of electric fitting care fully complete all as specified and as directed. |
| 54 | M&L for repair to leakage /seepage from 'J' Hooks of CGI /AC/Galvalume roof sheets by replading cup washer and bitumen washer including necessary T & P complete all as specified and directed. |
| 55 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed. |
| 56 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50 Sqm and n.exc 4.00 Sqm each. complete all as specified & directed. |
| 57 | Taking down shutters of any description exc. 1 Sqm & n.exc 2 Sqm each complete all as specified & directed. |
| 58 | Taking down shutters of any description not exc. 1.00 Sqm each complete all as specified & directed. |
| 59 | Refixing of shutters of any description exc 1 Sqm but n.exc 2 Sqm each in same opening including taking down, easing and adjusting and also refixing builders hardware as required |
| 60 | S&F for Pressed steel frames for doors (125X60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified directed |
| 61 | S&F for Pressed steel frames for doors (105X60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified directed |
| 62 | S & F 28-30mm thick second class hard wood glazed and skeleton door shutters (three panels), open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framming plain, chamfered or rounded fitted with cut and mitred beads or securing glass etc, size of members of shutters all as per clause No 8.20 (a) of SSR Part-I (2009). |
| 63 | S & F 28-30 MM mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both side complete all as specified & directed. |
| 64 | S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 65 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed |
| 66 | S&F in repairs MS 300 mm ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed . |
| 67 | S&F in repairs Hydraulic door spring (door closer) for doors complete all as per direction of engineer in charge |
| 68 | S&F Aluminium annodised barrel tower bolt of extruded section and fixed 200 mm size with bright bolt complete all as specified and directed. |
| 69 | S & F 250mm Aluminium alloy anodised sliding door bolts with hasp,staple(bolt type)and fixing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or aluminium alloy and fixed. |
| 70 | S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 71 | S & F Butt hinges 100 mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type C-21 and complete all as specified and as directed. |
| 72 | S & F aluminium handles 125 mm long, cast type, anodized complete all as specified & directed. |
| 73 | M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 74 | S&F in repair sheet glass 3 mm thick ordinary quality and glazing with beads fixed with metal pins / Oil putty glazing rubber or aluminium beading in square n.exc 0.5 sqm in each pane including hacking out of old broken glass complete all as specified |
| 75 | S&F in repair for figured glass,pin headed type thickness 3 mm thick and glazing with oil puttty/rubber and aluminium beading in square n.exc 0.5 sqm in each pane in repair complete all as specified and directed. |
| 76 | S&F in repairs PVC boards 19/20 mm thick any colour as in cabinets incl sshelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer's instructions including piano hinges, magnet catcher, handles etc |
| 77 | S&F in repairs 18-19 mm thick block board core grade 2 quality interior grade , commercial type laminated on both sides including piano hinges, magnet catcher, handles etc complete all as specified and as directed. |
| 78 | S & F mild steel work as in bands, straps, hold fast, wall ties, hooks for hanging fans, angle cleats & similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified & directed. |
| 79 | S&F powder coated anodised aluminium window and ventilator shutters (powder coating of any colour, thickness or powder coating not less than 50 micron) three track windows/ventilators ,side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified. |
| 80 | S&F coloured Aluminium Composite Panels (ACP) of interior grade for partitions (colour as specified by GE), including necessary sealing. The composite panel should consist of 3mm thermoplastic core of LDPE sandwiched between 2 skins of 0.25mm thick aluminium sheet (alloy designation 310S) making a total panel thickness of 4mm, the sheet shall be fixed using GI brackets/stainless steel bolts and nuts/ screws etc complete with spring washers and cap nuts and all other necessary accessories all hardware shall corrosion resistant frame out of anodised aluminium member.Complete all as specified and directed |
| 81 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) windows & ventilators frames, partitions etc including providing and fixing hinges/ pivots/roller incl fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per the directions of Engineer-in-charge |
| 82 | Supply and Fixing sheet glass 4-5 mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 83 | S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or weldedcomplete all as specified and directed. |
| 84 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 85 | S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 86 | S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165 all as spd and directed . |
| 87 | M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 88 | S & F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified & directed. |
| 89 | S & F in repairs 300 mm long mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed. |
| 90 | S&F in repairs door seal of aluminium powder coated with cotton mat of length 90 cm to 100 cm long complete all as specified and directed. |
| 91 | S&F as in repairs 200mm aluminium anodised barrel tower bolts of extruded section all as specified |
| 92 | S&Fas in repairs 150mm aluminium anodised barrel tower bolts of extruded section all as specified |
| 93 | S&Fas in repairs 300mm aluminium anodised sliding door bolt of extruded section all as specified |
| 94 | S&F as in repairs 150 mm extruded aluminum alloy handles, fabricated type anodised. |
| 95 | S&F as in repair 100 mm Butt hinges, medium weight, cold rolled mild steel, fixed to steel frames with and including welding etc complete all as specified |
| 96 | S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side laps fixed with coach screws and washers in roofs etc with grade of zinc coating 275 including dismantling and prepararing new zinc (or galvanised ) surfaces to receive painting , by coating with mordant solution including washing and cleaning,and preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of antisol roof paint (MB Green) over one coat of red oxide complete all as specified and as directed. |
| 97 | Supply and fixing 0.63 mm thick plain galvanised mild steel sheeting as in ridges, hips, valley gutter, drip, crumple and straight flashing (length and girth as fixed) with grade of zinc coating 275, corrugated mild steel sheeting with two corrugation side laps fixed with coach screws and washers in roofs etc with grade of zinc coating 275 including dismantling and prepararing new zinc (or galvanised ) surfaces to receive painting , by coating with mordant solution including washing and cleaning,and preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of antisol roof paint (MB Green) over one coat of red oxide. complete all as specified and as directed |
| 98 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping screw including dismantling all as specified |
| 99 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping screw as including dismantling all as specified and directed. |
| 100 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed |
| 101 | S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed. |
| 102 | All as per Srl item No. 100 here in before but except material complete all as specified and as directed. |
| 103 | S&F in repairs of magnet catches in cupboard/ kitchen cabinet to receive shutter and fixed with including fittings complete all as specified and directed. |
| 104 | Providing cement concrete 25 mm thick type B-1 (1:2:4) using 20 mm graded agg as in sub base to flooring . |
| 105 | M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to matchth or wall tiling including dismantling tile complete all as specified and directed |
| 106 | M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match including dismantling complete all as specified and directed |
| 107 | M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in skirting dado over and including 10 mm thick rendering in CM1:4 etc set & jointed in neat cement slurry and pointed in coloured cement to match including dismantling complete all as specified and directed |
| 108 | M & L, Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match including dismantling complete all as specified and directed. |
| 109 | M & L, Glazed ceramic tiles in vertical surface of size 300x 600x 8 to 10mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match including dismantling complete all as specified and directed. |
| 110 | M&L for vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6 incl dismantling complete all as specified and directed. |
| 111 | S&F in repair Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing,complete all as specified and directed. |
| 112 | M&L for vitrified Ceramic Double charge tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6 incl dismantling complete all as specified and directed. |
| 113 | M & L for non skid tiles, exterior grade, pattern of size 300x300mm, 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and including 15mm thick cement screed bed in CM 1:4 and dismantling of existing tiles complete all as specified and as directed. |
| 114 | M & L for non skid tiles, exterior grade, pattern of size 600x600mm, 10-12mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and including 15mm thick cement screed bed in CM 1:4 and dismantling of existing tiles complete all as specified and as directed. |
| 115 | M&L for machine cut kota stone slab flooring 18-20 mm thick with white marble all arond 150mm wide over and including 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshed polishing including demolition complete all as specified. |
| 116 | M&L for machine cut kota stone slab, 18-20 mm thick in riser and thread single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and mirror finshed polishing including demolition complete all as specified and directed. |
| 117 | M&L for Granite (of any type of coloured) work (table rubbed and polished) 14-16 mm thick in steps jambs,pillars, window cills, cooking plateform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges including demolition complete all as specified. |
| 118 | S&F in repair CP brass wall mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and directed. |
| 119 | S&F in repair brass spindle for central hole basin mixer /bib tap (as per sample) for mixing hot & cold water screwed down for iron pipe and fixed with pvc conncetion complete all as specified and directed. |
| 120 | S&F in repair CP Brass central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and directed. |
| 121 | S&F in repair brass legs for wall mixer/pillar cock fixed with pvc conncetion complete all as specified and directed. |
| 122 | S&F in repairs curtain rod made of SS pipe dia of rod 20 mm with decorative brackets and ends complete all as specified and as directed. |
| 123 | S & F in repair water Jet for EWC chromium plated with PVC connection complete. |
| 124 | S&F in repairs C P coated Hand shower (health faucet) 1 mtr PVC tube with wall hook complete for EWC, all as specified and directed. |
| 125 | S & F in repair Brass chromium plated shower rose 125mm size incl shower arm complete all as specified and directed. |
| 126 | S & F (in repair) CP brass soap dish complete all as specified & directed. |
| 127 | S & F (in repairs) chromium plated Gratings 125 mm size complete all as specified & directed. |
| 128 | S&F in repairs PVC waste pipe 32 mm to 40 mm dia size of adequate length (minimum length 60cms) suitable for WHB/Sink with PVC adapter fixed complete all specified and directed |
| 129 | S&F in repairs PVC water tank covers of capacity exc 250 Ltrs not exc 500 Ltrs complete all as specified and directed. |
| 130 | S&F in repairs PVC water tank covers of capacity exc 500 Ltrs not exc 1000 Ltrs complete all as specified and directed. |
| 131 | Repair to low level flushing cistern PVC for making it fully functional and leak proof by replacing PVC syphon kit complete all as directed and specified. |
| 132 | S & F in repairs double legged door stopper of allluminium alloy with rubber |
| 133 | M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall, landing, balconies, canopies, deck slabs and in shelves and like in repair to Chajjas, Claddings, soffits etc including bonding agent, complete all as specified and directed. Note:- Reinforcement to be measured & paid under respective items. |
| 134 | M&L for form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed. |
| 135 | M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete incl welding etc (if reqd) all as specified and directed. |
| 136 | M&L superthermolay waterproofing APP membrane thickness 1.2mm polyster etc including laying on Roof sheet for leakage/seepage all as specified and directed |
| 137 | M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate mixed with water proofing compound as in copings, roof padding etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed Note: Work shall be carried out upto 2 storey. Rates of necessary scaffolding deemed to be include in this item |
| 138 | M&L for preparation of surface by scrapping and removing all dust fungus algae etc and applying 2 coats of damp proof paint of superior quality, Complete all as specified and directed |
| 139 | S&F in repair 15mm bore fancy type bib taps (Two way ) brass chromium plated screwed down ,screwed for iron pipe or for brass ferrule including flench complete all as specified & directed . Please Enable Macros to View BoQ information |
