|
| 1 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge 15 mm to 40 mm nominal bore. |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 3 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.15 mm dia. G.I. pipes |
| 4 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.20 mm dia. G.I. pipes |
| 5 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.40 mm dia. G.I. pipes |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 7 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 100 mm dia(m) |
| 8 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 80 mm nominal bore |
| 9 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)40 mm nominal bore |
| 10 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 32 mm nominal bore |
| 11 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore |
| 12 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore |
| 13 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). 100 mm dia. |
| 14 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). 80 mm dia. |
| 15 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). 65 mm dia. |
| 16 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 40 mm nominal bore |
| 17 | Providing and fixing brass bib cock of approved quality.15 mm nominal bore |
| 18 | Lettering with black Japan paint of approved brand and manufacture. |
| 19 | Excavating holes more than 0.10 cum and upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5 m in: |
| 20 | Supply of labour for fixing of angle post, binding of G.I Pipes with angle iron post including and dismantling of barricading etc. |
| 21 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work 20 mm dia. G.I. pipes(50%) |
| 22 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 25 mm dia. G.I. pipes(50%) |
| 23 | Supply of binding wire for fixing of G.I pipe with angle post |
| 24 | Carriage of G.I pipe/ Angle from Divisional Store Kathua to Lakhanpur av 08 km |
| 25 | Carriage of G.I pipe/ Angle from Lakhanpur to Back Divisional Store av 08 km |
| 26 | Deployment of Tank Mounted Tractor trolley in case of urgency Please Enable Macros to View BoQ information |
