|
| 1 | Item No.1 - Excavation for foundation in earth soil of all types ,sand gravel and soft murrum including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means |
| 2 | Item No.2 Excavation for foundation Hard Murrum and boulder, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 3 | Item No.3 Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete |
| 4 | Item No.4 Providing soling using 80mm size trap metal in 15cm layers including filling voids with crushed sand grit ramming watering etc. complete. |
| 5 | tem No.5-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 6 | Item No. 6:- Providing and laying in situ /Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. |
| 7 | Item No.7 Providing & Laying in Situ / Ready Mix cement concrete in M-25 of Trap / Granite /quartzite/gneiss metal for R.C.C. Columns as per detailed design and drawings or as directed including Centering ,formwork ,cover blocks compaction and curing roughening the surface if special finish is to be provided ( Excluding reinforcement and structural steel) etc.Complete.with fully automatice micro processor based PLC with SCADa enabled reversible drum type Mixer /Cioncrete batch mix plat (pan mixer)etc.complete with natural Sand |
| 8 | Item No.8-Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. |
| 9 | tem No:- 9 Providing second class Burnt Bick masonary with conventional / I.S type briks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external wall including bailing out water manually,etc complete. |
| 10 | Item No.10-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 11 | Item No.12 Providing & Laying in Situ / Ready Mix cement concrete in M-25 of Trap / Granite /quartzite/gneiss metal for R.C.C. Beam & Lintels as per detailed design and drawings or as directed including Centering ,formwork ,cover blocks compaction and curing roughening the surface if special finish is to be provided ( Excluding reinforcement and structural steel) etc.Complete.with fully automatice micro processor based PLC with SCADa enabled reversible drum type Mixer /Cioncrete batch mix plat (pan mixer)etc.complete with natural Sand |
| 12 | tem No.13 Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. |
| 13 | Item No.14-Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 14 | Item No.15- Providing and fixing in position Fe-500 steel bar reinforcement of various diameters for R.C.C.pile caps footings, foundations, slabs,beams,columns,canopies, staircases,newels,chajjas, lintels, pardies, coping, fins, arches, etc. as per detained designs, drawings, and schedules, including, cutting, bending, hooking the bars binding with wires or tack welding and supporting as required complete |
| 15 | Item No.:-16 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. |
| 16 | Item No.17 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 17 | Item No.18:- Providing and applying two coats of waterproof cement paint of approved manufacture and colour to the plastered surface including scaffolding, preparing the surface, watering for two days etc. complete. |
| 18 | Item No. 19:- Providing and applying washable oil bound distemper of approved colour , shade and quality fo old/new surface, in two coat including scaffolding, preparing the surfaces (Excluding the primer coat) complete. |
| 19 | Item No. 20-Providing and laying vetrified matt finish Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 20 | Item No.21:-Providing and fixing frame with / without ventilator of size as specified with Country cut non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 21 | Item No.22:-Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, |
| 22 | Item No.23:-Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. co |
| 23 | Item No.24:-Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box |
| 24 | Item No.25:-Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 25 | Item No.26 Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete |
| 26 | Quality control charges for test a) BASIC TEST OF CEMENT:Standard Consistancy Fineness, Specific Gravity, Setting Time (Initial & Final), Compressive Strength, Soundness. |
| 27 | C.C.Cubes m-25 :Compressive strength |
| 28 | Basic Aggrgates -S.G.Crushing Valve |
| 29 | FINE AGGREGATE: Fineness Modulus (Sieve Analysis.) Silt & Clay Content |
| 30 | Bricks -Water Absorption,Comp.Strength |
| 31 | Steel Bar Testing -Tensile Strength |
| 32 | Add Royalty Charges For Rubble |
| 33 | Add 18% GST |
| 34 | Add 0.5% Labour Insurance Chargs |
| 35 | Add 1% Sqm Visit Charges |
| 36 | Add Electrification Charges Please Enable Macros to View BoQ information |
