|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation for shafts, wells, cesspits, manholes, pier holes etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out soft soil, complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25 cm, complete all as specified and directed. |
| 3 | Removing excavated material exc. 250m but n exc 500 m and depositing where as directed, complete all as specified and directed. |
| 4 | Material and labour for Cutting openings, through brick walls built in cement mortar for door, windows and other openings or enlarging existing openings. Converting window into door openings, etc. or cutting out defective. brick work for under pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks hard-core etc. to store and rubbish n exc 50 m, complete all as specified and directed. |
| 5 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stonework, and precast concrete articles, complete all as specified and directed. |
| 6 | Material and labour for forming jambs, etc.to openings (to foregoing item), including cutting, toothing and properly bonding into old work also facing, jointing and pointing to match existing work, complete all as specified and directed. |
| 7 | Taking down chowkhats or frames from the openings of size exc 1.5 sqm and not exc 4 sqm each with shutters ( without taking off shutters from the frames), complete all as specified and directed. |
| 8 | Taking down chowkhats or frames from the openings of size n exc 1.5 sqm each with shutters ( without taking off shutters from the frames), complete all as specified and directed. |
| 9 | Material and labour for Cement concrete type D2, 1:4:8 (40 mm graded aggregate) in foundations, fillings and mass concrete, complete all as specified and directed. |
| 10 | Material and labour for RCC (Design mix) M-25 (20mm graded aggregate) in foundation, including rafts, footing, foundation beams, plinth beams, bases for columns etc, basment slabs, under reamed piles and mass concrete, complete all as specified and directed. |
| 11 | Material and labour for RCC (Design mix) M-25 (20mm graded aggregate) in column, pillars, piers, posts and struts, complete all as specified and directed. |
| 12 | Material and labour for RCC (Design mix) M-25 (20mm graded aggregate) in Beams cantilever, bressumers, lintels over 1.5m span etc, complete all as specified and directed. |
| 13 | Material and labour for RCC (Design mix) M-25 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,and in shelves and like and laying 10mm thick plaster in CM 1:3 over fair faces of concrete surfaces when finishing the concrete surface even and smooth without using extra cement, complete all as specified and directed. |
| 14 | Supplying and fixing formwork to sides of concrete foundations, footings, bases of columns,raft and raft beams, sides and soffits (if any) of rough finished surfaces of concrete in foundations and plinth beams and similar work, vertical or to batter, complete all as specified and directed. |
| 15 | Supplying and fixing formwork to sides of pillars, posts, struts, piers and columns and stanchoins of rough finished surfaces of concrete, complete all as specified and directed. |
| 16 | Supplying and fixing formwork to soffits of suspended slabs such as roof slabs, floors slabs, landings, and similar work, not exc 200mm thick (Horizontal or sloping) of fair finished surfaces of concrete, complete all as specified and directed. . |
| 17 | Formwork to egdes of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or slopings and similar work exc 10 cm but n exc 20 cm wide, complete all as specified and directed. |
| 18 | Material and labour 10mm dia TMT Mild steel bars cut to length, bent to shaps including cranking bending spirally, hooping with columns and hooking end and binding with MS wire (annealed) not less then 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 19 | Material and labour 6mm to 8mm dia and over upto, including 10 mm stirrups,spacers and binders,bent to shaps including cranking, binding spirraly for hooping for column. hooking ends and binding with and including MS wire (annealed) not less then 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 20 | Material and labour for brick work with sub class \\"B\\" bricks, straight or curved on plan exc 6 mean radius, built in CM 1:6, complete all as specified and directed. |
| 21 | Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc, complete all as specified and directed. |
| 22 | Material and labour for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6, rendering for each 5 mm thickness over and under 10mm, rendering is to be finished even and smooth without using extra cement, complete all as specified and directed. |
| 23 | Material an labour for providing and applying plaster of paris putty of 1mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed. |
| 24 | Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/Litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 Litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90Litre/ 10 sqm over new surfaces, complete all as specified and directed. |
| 25 | Material and labour for preparation of newly plastered surface and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/Litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 Litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90Litre/ 10 sqm over new surfaces, complete all as specified and directed. |
| 26 | Material and labour for rendering 15 mm thick on fair/unfairfaces of brick work or concrete surfaces on walls in CM 1:4 is to be finished even and smooth without using extra cement, complete all as specified and directed. |
| 27 | Material and labour for finishing walls acrylic smooth exteror paint of required shade: New work (Two or More coat applied @ 1.67 Litre/10 sqm over and including priming coat of exterior primer applied @2.20kg/10 sqm) including preparation of new surfaces, complete all as specified and directed. |
| 28 | Material and labour for complete removal of existing treatment from wall and Finishing walls with Acrylic Smooth exterior paint of required shade : old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 29 | Material and labour Seamless Calcium silicate 12mm ceiling made out of 1800x1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self driling and tapping screws having philips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointed compound and 48 mm wide fibre tape to provide seamless finish and making cover light design, complete all as specified and directed. |
| 30 | Material an labour GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m Length) of 0.55 mm thickness having kurled web of 50mm and flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed. |
| 31 | Material and labour for preparation of newly plastered surface of Ceiling including chalkn whiting, on surfaces, prepara-tory to distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification with two or more coats on new work, complete all as specified and directed. |
| 32 | Material and labour for finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @3.28 ltr/10 sqm) over and including priming coat coat of primer applied @2.20 kilogram/10sqm, complete all as specified and directed. |
| 33 | Supplying and fixing factory made uPVC white colour fixed glazed window/ventilator of any size (as required) fixed type or openable type made of frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9+0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to the uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished walls, plastic packers, plastic caps and neccessary stainless screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if reqiured) shall be also fusion welded including drilling of holes for for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality. (Glass shall be paid separately), complete all as specified and directed. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Net opening will be measured for payment purpose. |
| 34 | Supplying and fixing factory made uPVC white colour Three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panel) upto 1.80m height made of (big series) of frame 116 x 45 mm & sash 46 x 62 mm bothy having wall thickness of 2.3+0.2 mm and single glazing bead of appropriate dimension.(Area of window above 1.75sqm) comprising of uPVC multi-chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length ( shape & size according to uPVC profile , appropriate dimension of uPVC extruded glazing beads and uPVC extuded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks locks with hook, zinz alloy body with single nylon rollers (weight bearing capacity to be 40kg) G.I. fasteners 100 x 8 mm size for fixing frame to finished walls, plastic packers, plastic caps and neccessary stainless screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if reqiured) shall be also fusion welded including drilling of holes for for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of ENgineer-in-charge. (Glass or wiremesh shall be included), complete all as specified and directed. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Net opening will be measured for payment purpose. |
| 35 | Material and labour for providing and fixing toughned glass 10mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified and directed. |
| 36 | Material and labour for providing and fixing toughned glass 12mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified and directed. |
| 37 | Supplying and fixing double acion floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 38 | Supplying and fixing 450 mm long Brass handles, cast type, complete all as specified and directed. |
| 39 | Material and labour for forsted to toughned glass of any thickness, complete all as specified and directed. |
| 40 | Matrial and labour for embossed any type of emblem of size 0.45 x 0.45 M on frosted glass door, complete all as specified and directed. |
| 41 | Supplying and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing, complete all as specified and directed.( Min. thickness of powder coating 50 micron) |
| 42 | Supplying and fixing powder coated anodised aluminium shutter (For doors) AI -section weighing 0.55 kg/m including joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc, complete all as specified and directed.( Min. thickness of powder coating 50 micron) |
| 43 | Supplying and fixing powder coated anodised aluminium (of any colour) window and ventilator shutters, fixed type, without sash bar, aluminium section weighing 0.55 kg/m including joining cleats,glazing clips, ruber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed.( Min. thickness of powder coating 50 micron) |
| 44 | Supplying and fixing anodised aluminium grill of approved design/pattern, with approved standard section and fixed to the window frame with CP brass/ss screw@ 200mm c/c, including cutting the grill to proper opening size for fixing and operation of handle and fixing approved anodised aluminium section around the opening all, complete all as specified and directed. |
| 45 | Supplying and fixing Sheet glass, 5.5mm thick ordinary quality and glazing with oil putty in square, n exc. 0.50 sqm in each pane including rubber packing and aluminium beading, complete all as specified and directed. |
| 46 | Supplying and fixing 5mm thick ACP(Aluminium composite Panel) sheet as in door panel/wall cladding with all accessories for fixing colour and design of ACP sheet, complete all as specified and directed. |
| 47 | Supplying and fixing in Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 48 | Supplying and fixing, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor and fixed to door shutter of size 150mm, complete all as specified and directed. |
| 49 | Supplying and fixing in repair Brass mortice lock, 4 levers, verticle type, size 100 mm, complete all as specified and directed. |
| 50 | Supplying and fixing in repair Brass mortice lock, 2 levers, verticle type, size 100 mm, complete all as specified and directed. |
| 51 | Supplying and fixing in repair 25mm dia stainless steel curtain rods/rails with Brass brackets, stops,rollers, finials, 1 pair of Brass decorative knobs for each curtain road etc, complete all as specified and directed. |
| 52 | Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railings with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side waist slab with suitable arrangement, complete all as specified and directed. |
| 53 | Supplying and fixing toughned glass 08mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified and directed. |
| 54 | Supplying and fixing stainless steel rolling drawer pull type suitable for kitchen cabinets with all fixing arrangement area of each drawer n exc 0.30 sqm of vertical face having depth 450mm to 600mm, complete all as specified and directed. |
| 55 | Material and labour for fixed in repairs 18/19mm thick prelaminated HDHMR board, interior grade, with decorative choice lamination, fixed with screws as in shelves/Shutters, complete all as specified and directed. |
| 56 | Supplying and fixing continous (Piano) hinges, Width of flaps (when open) in 40 mm mild steel, bright finish or electro galvanised, complete all as specified and directed. |
| 57 | Supplying and fixing 75 to 80 mm long brass handle, complete all as specified and directed. |
| 58 | Material and labour for broken bricks Hardcore of gauge n exc 63 mm, deposited , spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface, complete all as specified and directed. |
| 59 | Material and labour 75mm thick Cement concrete type D2, 1:4:8 using 40 mm graded agregate as in sub base of floor, complete all as specified and directed. |
| 60 | Material and labour for cement concrete 75 mm thick type C-2 (1:3:6) using 40 mm graded stone agregate as in plinth protection etc is to be finished even and smooth using extra cement, complete all as specified and directed. |
| 61 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 62 | Material and labour for Vitrified ceramic dark shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes complete all as specified and directed. |
| 63 | Material and labour for Vitrified tiles,light shade 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors/wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6/plaster in CM 1:3 complete all as specified and directed. |
| 64 | Material and labour for glazed ceramic coloured tiles in vertical surface of size 450x350x6-7mm thick on vertical surfaces and including rendering of 10mm thick in cm(1:4)set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed. |
| 65 | Material and labour Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but n exc 0.18 sqm,etc shade and jointed in neat cement slurry and pointed in white cement or clolured cement to match including rendering 15 mm thick screed bed in cm 1:6, complete all as specified and directed. |
| 66 | Supplying and fixing in repair of one piece ceramic floor/wall mounted EWC with features like twin flush system, noiseless soft close seat cover , anti-bacterial surface white with PVC(SWR) 'P' / 'S' trap 110/110 mm bore, complete all as specified and directed. . |
| 67 | Supplying and fixing in repairs vitreous china wash down water closet pan (pedestal pattern) while inluding fixing bolts inluding while seat cover with flat bottom and cover, mild steel chromium plated hinging device (excluding flushing cistern and flush pipe), complete all as specified and directed. |
| 68 | Supplying and fixing in repairs PVC low level flushing cistern 10 ltr capacity, with syphonic action with inlet ball valve, flush pipe of polythelene of low or high density or 32mm bore PVC flush pipe etc, complete all as specified and directed. |
| 69 | Supplying and fixing in repairs PVC jet spray suitable for EWC, complete all as specified and directed. |
| 70 | Supplying and fixing in repair chromium plated health faucet with 1.5 meter long chain, complete all as specified and directed. |
| 71 | Supplying and fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail, complete all as specified and directed. |
| 72 | Supplying and fixing Sheet glass corner shelf assembly consisting of three nos 5.5mm to 8mm thick sheet glass corner shelf with chromium plated bracket guard and railing, complete all as specified and directed. |
| 73 | Supplying and fixing PVC connection 15mm size with PTMT , nuts of length 600mm, complete all as specified and directed. |
| 74 | Supplying and fixing in repair vitreous China wash basin white,flat back size 550x400mm including PTMT waste coupling 32mm bore,waste PVC pipe complete, CP brass pillar tap 15mm bore of fancy type, complete all as specified and directed. |
| 75 | Supplying and fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and insluding 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and scewrs and union for discharge pipe, complete all as specified and directed. |
| 76 | Supplying and fixing 15mm bore concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle fancy type chromium plated with long shank cup(concealed type), screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 77 | Supplying and fixing 15mm bore concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle fancy type chromium plated, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 78 | Supplying and fixing in repair of brass chromium plated fancy type bib taps 15 mm bore long nose screwed down for iron pipe or for brass, complete all as specified and directed. |
| 79 | Supplying and fixing in repair WHB mixture Pillar taps 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without l'ttered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed. |
| 80 | Supplying and fixing in repairs 100mm dia CP grating with or without hole type, complete all as specified and directed. |
| 81 | Supplying and fixing Vanity of size 820x450 mm with vitreous china wash basin white with suitable size including CP waste coupling 32 mm bore waste PVC pipe, complete all as specified and directed. |
| 82 | Supplying and fixing 820mm x 1200mm bevelled edge mirror of selected quality glass,mounted on 6mm thick commercial plywood and fixed to wooden plug with chromium matched brass screws, complete all as specified and directed. |
| 83 | Supplying and fixing in repairs CP brass towel rail of 20mm dia and 600mm long, complete all as specified and directed. . |
| 84 | Supplying and fixing Vitrous china white (Box type) toilet paper holder fixed to walls with chromium plated brass screws, complete all as specified and directed. |
| 85 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal of store, complete all as specified and directed. |
| 86 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal of store, complete all as specified and directed. |
| 87 | Supplying and fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down, complete all as specified and directed. |
| 88 | Supplying and fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down, complete all as specified and directed. |
| 89 | Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore complete all as specified and directed. |
| 90 | Supplying and fixing 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) all fittings, complete all as specified and directed. |
| 91 | Supplying and fixing 75mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) all fittings, complete all as specified and directed. |
| 92 | Supplying and fixing 110mm bore PVC(SWR) bends any radius, complete all as specified and directed. |
| 93 | Supplying and fixing 110mm PVC(SWR) junction (Single T) equal and unequal, complete all as specified and directed. |
| 94 | Supplying and fixing in repair 100mm bore PVC (SWR) gully trap, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 95 | Material and labour for vitrified Endura out door parking tiles heavy duty set, jointed and pointed neat cement slurry infloors with pigment over 20mm thick screed in CM 1:6, complete all as specified and directed. |
| 96 | Dismantling of roof brick tiles fixed in cement mortar in single layer, complete all as specified and directed. |
| 97 | Demolition mud in roofs any thickness including plastering and leeping, (wether full thickness removed or only a part thereof), complete all as specified and directed. |
| 98 | Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in providing cement concrete in roof kerbs or mud stops, rounded or chamfered edges and like including weathering site rounded and throating & similar work etc, complete all as specified and directed. |
| 99 | Material and labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc, complete all as specified and directed. |
| 100 | Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms, complete all as specified and directed. |
| 101 | Material and labour for 40 mm thick brick tiles laid over 15 mm thick screed bed in cement mortar 1:6 and jointed, grouted and jointed flush in cement mortar 1:3 mixed 5% of crude oil of by weight of cement on roof padding flush pointing in CM 1:3, complete all as specified and directed. |
| 102 | All as per Sri Item No.100 here-in-before but except brick tiles. Note -: Old serviceable tiles shall be reused. |
| 103 | Excavating in post holes (or similar holes) each hole n exc. 0.5cum, getting out,returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc. 25cm, watering and removing surplus soil to a distance n exc. 50m and making good surfaces in soft/loose soil, complete all as specified and directed. |
| 104 | Cement concrete type B2, 1:2:4 (40 mm graded aggregate) in foundations, fillings and mass concrete, complete all as specified and directed. |
| 105 | Supplying and fixing Steel work in tubular trusses including special shaped washer etc. complete ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St.-240, complete all as specified and directed. |
| 106 | Supplying and fixing mild steel framed work such as grills,grating ,etc with ends of bars shouldered and/or riveted, or forged into spikes, framed gaurd bars, barred iron door, ladders, framed balusters, walk ways, railings, framework of water tanks, similar work Conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 107 | Material and labour for two coats of synthetic enamel paint over one coat of primer including preparation of new steel surfaces, complete all as specified and directed. |
| 108 | Supplying and fixing prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws s specified, complete all as specified and directed. |
| 109 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws s specified, complete all as specified and directed. |
| 110 | Taking down carefully point wiring of any type (i.e wooden batten,surface conduit,casing capping or concealed conduit) complete for light, fan, socket , or power point with fittings and fixtures such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/rawal plug, items as per schedule and making good distributed surface of walls, floors etc, complete all as specified and directed. |
| 111 | Material and labour for point wiring complete with 1.5 sqmm single core PVC inslulated unshealthed multistranded,copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit, medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.0mm thick of suitable modules , concealed in walls with modular white plated cover as top cover fixed with scewrs for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, shealthed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete, all as specified and directed. Note-:(i) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases and making good as existing to distributed surface with cement mortar, if required any shall be deemed to included in the qouted rates. (ii) Modular fittings/fixtures such as switch, socket, regulator etc. shall be measured and paid separately as under relevant item. |
| 112 | One light point controlled by one switch, complete all as specified and directed. |
| 113 | One fan point/Exhaust fan controlled by one switch, complete all as specified and directed. |
| 114 | One bell point controlled by one bell push, complete all as specified and directed. |
| 115 | One 5 Amps outlet point on same board with other switches/sockets, complete all as specified and directed. |
| 116 | One 3 pin 5 Amps socket outlet on independent board, complete all as specified and directed. |
| 117 | All as per Srl item No. 110 here in above but point wiring with 2.5 Sqmm FRLS cable and 2.5 sqmm cable earth continuity wire for one 3 pin socket outlet, 15 Amps on independent board, complete all as specified and directed. |
| 118 | All as per Srl item No. 110 here in above but point wiring with 4 Sqmm FRLS cable and 4 sqmm cable earth continuity wire for one 3 pin socket outlet, 15 Amps on independent board, complete all as specified and directed. |
| 119 | Supplying and fixing modular switch 1 way 6A, 240 volts, 1 module, complete all as specified and directed. |
| 120 | Supplying and fixing modular switch 1 way 16A, 240 volts, 1 module, complete all as specified and directed. |
| 121 | Supplying and fixing Modular bell swich 6 Amp 1 module size, complete all as specified and directed. |
| 122 | Supplying and fixing modular socket,6A, 240 volts, 2/3 pin combined 2 module, flush type, complete all as specified and directed. |
| 123 | Supplying and fixing modular socket,6A/16A, 240 volts, 2/3 pin combined 2 module, flush type, complete all as specified and directed. |
| 124 | Supplying and fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal, complete all as specified and directed. |
| 125 | Supplying and fixing modular fan step regulator, 2 module, 240 volts, 50Hz, suitable for ceiling fan 1200 mm sweep, complete all as specified and directed. |
| 126 | Supplying and fixing lam holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. |
| 127 | Supplying and fixing LED bulb 12 watt suitable to fitting for batten holder, complete all as specified and directed. |
| 128 | Supplying and fixing of recessed mounted 2' x 2' LED Luminaire 30 watt 6500k CRCA housing and with its ultra bright LED provide uniform light dirtribution which make it best in class proposition for modern work spaces. Suitable for armsstrong/grid ceiling, an additional mounting frame is required for gypsum/POP ceiling installation, complete all as specified and directed. |
| 129 | Supplying and fixing of single phase call bell 'DING DONG', AC 230 volts single pole fixed over and including pressed steel sunk box of size 175 x 100 mm duly covered with 3 mm thick bakelite sheet, complete all as specified and directed. |
| 130 | Supplying and fixing LED lights fitting 1x 20w.220v,AC, 5700K, decorative box type with driver,double sided connection, CRI>80, PF>95%, THD>10%, Lumen>2100 including LED tube light , connecting up with 3 core flexible copper conductor cable (1.0sqmm size/core) from ceiling rose, complete all as specified and directed. |
| 131 | Supplying and fixing dusk & dawn roadway luminaries 30 Watt,230 V AC, 5700K outdoor type with epoxy black black powder coated sheet of high pressure die-cast aluminium hosing and heat resitant complete with impact and corrosion resistant including thermal management in multiple optics, PF>95%,THD>10%,Lumen>4500 im with 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting including driver, lamp bracket made of 32mm bore galvanised iron light grade pipe made to shape having overall length n exc 1.5mtr, through mild steel clamp clamp of 25mm width and four Nos nuts, bolts & washersof 12mm dia, 100mm long fixed to wall with all other fittings, complete all as specified and directed. |
| 132 | Taking down existing AC of any capacity any size and refixing the same in the new location after repairing the B/R work, complete all as specified and directed. |
| 133 | Supplying and fixing ceiling fan 1200mm sweep complete with blades, down rod,electronic regulator, accessories(i.e. PVC canopy, rubber bush, split pin, hanging clamp, fan hook,holdfasteners etc.) 230 volts, white colour, with min air delivery 210CFM, BEE 5 star rated with brushless direct current motor(BLDC) technology and connecting up with & including 3 core flexible copper conductor cable from celing rose to celing fan, complete all as specified and directed. |
| 134 | Supplying and fixing Air fresh circular/exhaust fan,heavy duty, plastic body AC single Phase, 230V of size 250mm sweep, with blades and frame and louvers fixed /grouted to wall with suitable bolts,nuts etc. and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to exhaust fan including cutting hole suitable for fixing exhaust fan, complete all as specified and directed. |
| 135 | Supplying and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2KWcapacity 25 litre ,BEE 5 star rated .Complete with all accessories such as safety valve, hermostate, NRV, connection piece etc, complete all as specified and directed. |
| 136 | Supply and fixing stainless MCB SPN 63 Amp,25 KA of 220 volt suitable to fix in DB, complete all as specified and directed. |
| 137 | Supplying and fixing sheet metal enclosures with socket plug and MCB single pole and neutral enclosures with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 138 | Supplying and fixing sheet metal enclosures with socket plug and MCB single pole and neutral enclosures with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, complete all as specified and directed. Please Enable Macros to View BoQ information |
